Hello,
I am not familiar with SQL at all any good sites on install I understand
that best practice is to use two aprtitions one foe logs and one for data.
I have it as part of a SBS package.
Many thanks
Nic
Thanks in advance. What is maximum SQL Server database (*.mdf) file size with SQL Server 2000 as part of Microsoft Small Business Server 2000? (Database files were limited to 10 GB in SBS 4.5 with SQLServer 7.0... has this changed?).
View 1 Replies View RelatedCurrently a server running 2003 small business operating system has MSDE 2000 and Microsoft##SSEE.
A memory problem exists with SQL consuming over 50% of RAM. Total RAM is 4GB.
There is a SQL 2000 patch for this type of problem. However, it calls for SQL to be upgraded to SP4.
Problem:
Can this MSDE 2000 be upgraded with SP4 and have memory patch applied with Microsoft##SSEE also on this box?
Please let me know. Thank you.
I'm trying to configure SQL server 2000 (standard edition) to send e-mail on a Small Business Server 2003. There's a great article on how to do this on a SBS 2000 server (KB304967), but it does not apply to SBS 2003. Can anyone point me to a article or white paper on how to configure SQL on a SBS 2003 server to send e-mail. Thanks.
David Neahusan
Dear Sir,
I would like to use sql server 2000 as datasource with visaul web developer express.
My concern here is it compatilbe ?
Thanks
Can anyone take me through synchronization of contacts within Business Contacts Outlook into Microsoft Small Business Accounts?
I run a stand alone PC with NO network. When SBA came SQL was also installed. Apparently you can synchronise Contacts within Business Contacts with SBA but both SBA & Outlook should work through the same SQL server.
Has anyone tried this?
Can someone walk me through the process?
Thanks
Debbie
Hello all, has anybody migrated the BCM database from a stand alone PC to Small Biz Server? We fail to import the data in a correct way. After importing the data into BCM on SBS the clients do not recognise the BCM database any more. Thank you!
View 3 Replies View RelatedHi
We have SQL Express running very slowly on Small Business Server. Does
anyone know if there is a conflict between the two? Or any ideas on how
to solve our problem?
(Autoclose is set to
false)
Thanks
I have an SBS 2003 server that is running SQL 2000 standard edition which was recently upgraded to Small Business Server 2003 R2.
I have installed SQL 2005 workgroup edition on the SBS 2003 R2 server which acts both as an AD server and Exchange server. I installed SQL 2005 for the purpose of using SQL 2005 for my sharepoint services on the Small Business Server R2.
Now I have SQL 2000 and SQL 2005 workgroup edition installed, but I'm unsure whether I can uninstall the SQL 2000 and how to know whether the sharepoint instance is running in SQL 2005 or SQL 2000?
Additionally, I have some MSDE's running for WSUS and Server Reporting which are installed by the Small Business Server installation.
Which tools should I use to become familiar with identifying the databases and which version of the database engine is used for which database regardless of whether it is a SQL instance or a MSDE instance.
How can I identify which SQL versions are not in use and whether I can uninstall if not needed.
Thanks!!
Hi
MS Backup in Microsoft windows server 2003 for small business server reports:
<-- Volume shadow copy creation: Attempt 1.
"MSDEWriter" has reported an error 0x800423f4. This is part of System State. The backup cannot continue.
Error returned while creating the volume shadow copy:800423f4
Aborting Backup. -->
The VSS events that I get are 8193 & 6013
The MSSQL$SHAREPOINT events are 17055, 18452 & 18456
These are the main Errors that I get:
Event Type: Error
Event Source: VSS
Event Category: None
Event ID: 8193
Description:
Volume Shadow Copy Service error: Unexpected error calling routine IClientVirtualDevice::GetCommand. hr = 0x80770004.
Event Type: Error
Event Source: MSSQL$SHAREPOINT
Event Category: (2)
Event ID: 17055
User: NT AUTHORITYSYSTEM
Description:
18210 :
BackupVirtualDeviceFile:repareToFreeze: failure on backup device '{74A09E78-8845-47EB-9602-705E4406096C}1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
Event Type: Error
Event Source: VSS
Event Category: None
Event ID: 6013
User: N/A
Description:
Sqllib error: OLEDB Error encountered calling ICommandText::Execute. hr = 0x80040e14. SQLSTATE: 42000, Native Error: 3013
Error state: 1, Severity: 16
Source: Microsoft OLE DB Provider for SQL Server
Error message: BACKUP DATABASE is terminating abnormally.
Event Type: Error
Event Source: MSSQL$SHAREPOINT
Event Category: (2)
Event ID: 17055
User: NT AUTHORITYSYSTEM
Description:
18210 :
BackupVirtualDeviceFile:repareToFreeze: failure on backup device '{74A09E78-8845-47EB-9602-705E4406096C}5'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
I need to get the Backup System working again urgently.
Any advice will be greatly appreciated
In relation to my topic:
http://www.dbforums.com/t990566.html
I'm curious as to how much of a difference SQL-server will make to our databases.
Is there anyone who can tell me what kind of version of SQL-server ships with Small Business Server 2003 Premium edition?
I looked on the Microsoft website and it just states that
SQL-server 2000 is included with Small Business Server 2003 Premium edition.
Is there anyone who can help me?
Any thoughts link redirects tips are appreciated
Anyone knows what the difference is between SQL Standard edition OLPand SQL Server in SBS 2003?I'm interested in purchasing SBS2003 because the price is much lowerthan if you buy OS2003 + SQL2003 separately.
View 1 Replies View RelatedI've developed years ago a small business application (about ten tables,basic relationships, 10 forms, 3 reports a few queries) with Borland Paradox7, most of it developed with wizards and little ObjectPAL coding.Old'n'crappy.Seriuosly thinking rewriting it from scratch using MS SQL server 2000 as theDB platform.Low on time.My knowledge: BASIC: good, C & C++: fair, Pascal: almost nothing;Looking for a RAD tool:- client application will be running on P4 with XP/2000 & 128MB RAM - Mustbe FAST (light .exe)- easy learning curve- Hopefully with wizard: design tables for SQL Server 2000, createrelationships, build automatically forms & reports on existing tables.Thanks
View 13 Replies View RelatedHi,
Just upgraded some development desktops to Vista Business. However we need
to still connect to some older remote windows 2000/SQL 2000 servers.
Trying to setup an ODBC system DSN on our Vista Business local desktop we get the
following errors -
-START ERROR WINDOW-
Connection Failed:
SQLState: '01000'
SQL Server Error: 772
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
(SECDoClientHandshake()0.
Connection failed:
SQLState: '08001'
SQL Server Error: 18
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SSL Security Error
-END ERROR WINDOW-
Any help greatly appreciated as this is stopping us from making
database/table connections etc. We've checked the firewall setup and all is well there.
PS - we can still connect fine using XP or windows 2000 desktops and their
local DSNs.
Im having a lot of trouble inserting a small time value into a table cell. I gave the cell column the data type 'DateTime', i found i couldnt manually insert a time only value such as '12:30 PM' into a column with 'SmallDateTime'. Something about a "SmallDateTime Overflow Error". However if i enter a similar time value into a table column with the data type 'DateTime' it will happily accept it and leave it as entered.
The real problem seems to be when i try to send a time value to that column with my ASP.NET application. Because it inserts the time value and todays date. So that if i send:
12:30 PM
It will be stored as:
15/11/2003 12:30:00 PM
I only want to store the short time, not the date especially not the date that row was created on because thats useless for the purposes of what my application is trying to achieve and just creates problems down the track when selecting rows.
How can i correct this?
I was trying to install Business Scorecard Manager Server , for that i have installed SQL server 2000, Analysis services and Service Pack 4 and also have taken mixed mode of authentication . Then i have installed sharepoint portal server 2003 and extended a site .
View 3 Replies View RelatedI want to store a small cirle in a text field. Can anyone tell me how I can enter it in ascii code.
Thanks
Does anyone have a successful prescribed sequence for installing VS2005 and Business Intelligence Reports Projects on a Vista Business workstation to be used to create reports for a server?
I've looked through everything I can find here and I don't seem to see a clear solution without a lot of trial and error.
Fact is, I've not been successful getting just the reports to install on a plain XP box. Of course, the report creation looks fine on the server but I don't want to work directly on the server.
Thank you
Hello,I have windows small business server 2003 premium installed, I can see the server service manager but can not start any service(nothing is listed).How do I set it up?
I can not find the enterprise manager to create a database.Thanks for your help
I am trying to do a very small numbers table to compare A1c's against. However I am running into a issue when recursion hits the number 2.27 it starts to go out of my scope that I want with the next number being 2.27999999999999. Here is the code I'm using below. I need a Decimal(2,2) or Numeric (2,2) format with a range of 01.00 to 20.00. However every time I use Numeric or Decimal as the data type I get a error "Msg 240, Level 16, State 1, Line 5.Types don't match between the anchor and the recursive part in column "Number" of recursive query "NumberSequence"."
DECLARE @Start FLOAT , @End FLOAT ---DECIMAL(2,2) Numeric (2,2)
SELECT @Start=01.00, @End=20.00
;WITH NumberSequence( Number ) AS
(
SELECT @start as Number
UNION ALL
SELECT Number + 00.01
FROM NumberSequence
WHERE Number < @end
I need a script that will return the replication status as small int.
View 1 Replies View RelatedLead information fields (name, address, etc.)
promo_ID: the id of the web form that site visitors filled out to send us their information
PPC_source: If this lead is a result of a Pay-per-click campaingwe capture the name of the search engine
Status_ID: Shows if the lead has been contacted, quoted, sold, bad lead, etc.
I was asked to come up with a summary report calculating the number of leads under each status ID - for each PPC_source
Example:
Total leads |
Google |
Yahoo
Status = pending
Status = contacted
Status = quoted
Status = Sold
Looping over each record (12,000 and counting) to get the sums of each status for each pay-per-click campaign takes a while (not all campaigns / status are listed above).
The question: Is it better to retrieve all records in a dataset and do the math in the business layer or is there a way to do the math in a SQL Procedure, or function.
Thanks.
Hi,
I'm installing SQL Server 2005 on VISTA business.
While Configuring SQL server database services, following error appears:
Description of error is attached herewith.
Please help..
Thanks in advance
vivpol
Hi,
I am new to sql server reporting service.
I am using Express edition of Sql server 2005.
For using sql server reporting service. I have downloaded SQLEXPR_ADV.EXE and SQLEXPR_TOOLKIT.EXE. I installed both.
But what happen when I am going to Start > Program Files > Sql Server 2005 > Sql Server Business Intelligence development studio. For creating Report project. Then a Missing Shortcut message box is showing where the message is "Windows is searching for devenv.exe. To locate the file yourself, click browse". i.e. shortcut has been created at the time of installation but the required files are not being copied.
I again I open visual studio and from there I select report project but an error message is showing.
I tried again and again but the same result I got.
I am very confused and unable to understand what to do and how to fix it.
please help me..........
Thanks in advance
Reyaz
I installed all the software that comes with sql server 2005 express including: sqlexpr.exe, sqlexpr_adv.exe, sqlexpr_toolkit.exe. All the installations were successful. However, Sql Server Business Intelligence Development Studio could not be found from start menu. I am not sure whether it got installed. I need it to develop reports. What could the problem be? Any solutions?
Regards sandy
I'm trying to install SQL Server 2005 Express on my Vista Business x64 laptop and during install I keep getting the message:
- ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
Failed to find the ASP.Net Version Registration with Microsoft Internet Information Services (IIS).
Dear friends
I have some instalation problem.I am using winxp.i am installing sql server 2005 first in d: drive and automatically create the in c drive
Microsoft Visual Studio 2005 Premier Partner Edition - ENU and after that i am instaling the Visual studio 2005 team suit,
Now i wants to instal this in d drive because of space.when i trying to instal in d drive it shows to uninstal the Microsoft Visual Studio 2005 Premier Partner Edition - ENU in c drive and then instal or instal in c drive itself not allow instalation in d drive.
so i uninstal the Microsoft Visual Studio 2005 Premier Partner Edition - ENU and instal team suit in d drive.now i cant get the Business Intelligence Solution in sql server 2005.i am trying in install seperate in msi format no result,how can i get back the
Business Intelligence Solution back.
I just got through uninsalling the express verions of SQL2005,VB,C#&VWEB and .NET in preparation of a clean install of SQL Server 2005 Developer Edition.
I installed the developer edition of SQL Server 2005 and let it install it's own verions of .NET BI, etc. Now I see that in the install instructions for VB & C# Express requires that all verions of SQL server and .NET need to be uninstalled.
"Before installing, you must uninstall any previous Beta, CTP or Tech Preview versions of SQL Server 2005, Visual Studio 2005, and the .NET Framework 2.0."
So, does that mean I can't use any express editions of Visual Studio 2005 components with the Developer version of SQL Server Business Intelligence Development Studio (AKA - Visual Studio 2005 Version 8.0.50727.42 RTM.050727-4200)?
TIA,
Dave K
Hi y'all,
I just know that SQL Server Express Edition SP2 is being released by Microsoft recently, and from previous informations I gathered; it seemed that SQL Server 2005 Express Edition is not compatible with Windows Vista (any editions).
With the release of SP2, does this mean SQL Server 2005 Express Edition is now compatible with Windows Vista?
If so, do I have to install .NET Framework v2.0 first in my Windows Vista Business edition? BecauseI know that Vista Business edition already has .NET Framework v3.0 in it.
Thanks for your help! Appreciate it...
This is a numpty question if you know the answer, but I'm not sure how to find the information I want!!!
What I would like to know is: What happens when you drag and drop a package within the SSIS Packages section of the solution explorer?
I was trying to reorder the package.dtsx files in the SSIS Packages folder but couldn't find a way to alphabetise them. I tried to drag and drop the file to the right location in the list instead, but it dissapeared from the folder display completely. What happened?
I can't see it's contents copied in the file it was dropped onto, nor did it replace the file. The package itself can still be added from the physical folder structure on the PC but it gets added at the bottom of the list.
I'm just intrigued as to what is going on. It just doesn't seem logical (something that can be said of much of my limited experience of the interface).
Any ideas?
I have been trying to install SQL Server 2005 (Developer Edition) on a computer with Vista Business. I can't seem to be able to install SQL Server 2005 SP2 and when I attempt to login, I get the message.
Cannot connect to Server.
the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attemp failed because the connected party dd not properly respond after a period of time, or established connection failed because connect host has failed to respond) Microsoftw SQL Server Errore 10060
I've been attempting to install SQL 2005 Standar on my Vista Business laptop. I am able to install all the components except for Reporting Services - the checkbox for it is disabled. I have installed/activated IIS, so I don't know why this option is still unavailable to me. Can anyone assist me?
Thanks in advance!
New to SQL. Why does SQL Server Business Intelligence Development Studio prompt me for a user id and password whenever I try to deploy a report. I cannot get report manager to come up in IE 7. I'm using Vista Home Premium.
Any help would be appreciated.