Smart Device CAB Project Detected Dependencies Not Included?
Jul 5, 2006
Hi
I have created a Smart device application for Windows CE 5.0 device using Visual studio 2005 and i have added the smart cab project to the solution. When I add project out in teh appllication folder, the detected dependencies are not included. Instead dependent files appear with red circle in solution explorer.
My project uses .Net Framework 2.0 and SQL Server mobile 2005 and SQL Server mobile database file and some symbol files
I need included all of them in my cab project and when user clicks on it (in the device) it should install all of them.
Let me know why detected dependencies are not included in the Cab project and how can get all the above mentioned things to be installed along with my program
Regards
Mani
View 4 Replies
ADVERTISEMENT
May 21, 2008
I've created a simple application that uses a SQLCE 3.5 database. When I debug it SQLCE 3.5 is deployed to the emulator. However, I made a "smart device cab project" for my application and copied the cab file to my windows mobile 6 device and it does not deploy SQLCE 3.5. I don't see a way to specify the prerequisites of the "smart device cab project" like you can in a normal setup project. How can I get SQLCE 3.5 to deploy with my application...or even just get it on my device? I've tried installing it on my desktop with the device connected via active sync, but it doesn't install on the device like the compact framework did.
View 3 Replies
View Related
Feb 19, 2008
I have both vs2005 and vs2008 installed. I'm working with a .Net Compact Framework 3.5 Smart Device Project.
If I refrence the System.Data.SqlClient.dll (Version 3.0.3600.0 Runtime v2.0.50727)
C:Program FilesMicrosoft SQL Server Compact Editionv3.5DevicesClientSystem.Data.SqlClient.dll
When I deploy the application I get an error ".Net Compact Framework v2.0 could not be found Please install it and run the setup again"
Studio is :
Deploying 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerClientv2.0wce500ARMV4isql.ppc.wce5.armv4i.CAB'
We tested this on a PC without vs2005 and it seems to work fine.
Any suggestions?
jlj
View 3 Replies
View Related
May 24, 2007
i m developping a smart device application with vb.net
i m using the following code from:
http://msdn2.microsoft.com/en-us/library/aa454892.aspx
(i still working on the first exercice and i'm following it step by step)
everything is working properly
i was advised to add this code when closing the form1
Try
Me.ContactsBindingSource1.EndEdit()
Me.ContactsTableAdapter1.Update(Me.TestDataSet1.contacts)
MsgBox("Update successful")
Catch ex As Exception
MsgBox("Update failed")
End Try
the problem is:
should this code update the database created with sql server 2005
if yes why isnt it working here
and should the database be replicated on my emulator before it is updated
(in this exercice i do not have a database storerd in the emulator)
plz i urgently need the answer
View 4 Replies
View Related
Dec 1, 2007
I need to write a code for remove dependencies between Table1.Prikey and Table2.Idand add dependencies between Table1.Prikey and Table3.Id how to write the code? please help .. thank you very much
View 2 Replies
View Related
May 29, 2008
For some reason in a Team Foundation Team Project that has multiple project types (SSRS, SSIS, WebSite, C# Business DLL...), the SSIS project makes itself the startup project to the team project. If I explicitly set another project as the startup project to the team project and then select an SSIS package in the SSIS project in the team project, the SSIS project becomes the startup project automatically.
I am using Visual Studio 2005 SP1.
View 3 Replies
View Related
Nov 17, 1998
I have a database in development in SQL Server 6.5 that needs to be occasionally deleted and rebuilt from a script when table structures are changed. I found that when very complex queries were performed, the 2 MB default size of tempdb filled up and returned errors, so I went to the Enterprise Manager to expand tempdb, learned that I had to first expand a device to expand tempdb into, and foolishly chose to expand tempdb into the same device space used by my application, instead of into one of the system databases. Now when I try to delete the device in preparation for its rebuild, the Enterprise Manager responds with an error message saying the device can't be deleted because it contains system tables. Is there any way to get the expanded portion of tempdb out of my application device so that the device can be deleted, without reinstalling SQL Server?
View 1 Replies
View Related
Jun 19, 2006
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
View 54 Replies
View Related
Apr 14, 2006
Hi to All
when i m trying to execute following code
backup database web
to disk = 'c:inetpubwwwrootackupmybakup.bak'
with format
I m Getting Error like :
Server: Msg 3201, Level 16, State 1, Line 1
Cannot open backup device 'c:inetpubwwwrootackupmybakup.bak'. Device error or device off-line. See the SQL Server error log for more details.
Server: Msg 3013, Level 16, State 1, Line 1
BACKUP DATABASE is terminating abnormally.
This error is Generated only when i m trying to access folders within "wwwroot" but not in any other folders , even command runs success fully for "wwwroot" folder . !!
but not for any subfolders of wwwroot.
Can Any One Help Me ??
View 6 Replies
View Related
Jun 24, 2007
Hi,
I have been working on some SSIS packages for a while now and today while i was working i was trying to create a new connection and in the process there was an error and it said the BIDS has to be closed and i closed it but later when i open BIDS and try to open my project(.sln) from the file menu to work on the half done package it pops up an error which shows the path to my project location on the first line and next statement on the pop up error box says:
"Make Sure the application for the project type (.dtproj) is installed."
I tried to check some forums in which some suggested to try installing SP1 which i tried but ..i dont know why but the SP1 fails to install (i dont know if its causing problem becoz i already installed SP2 as i had some other problem before for which the cure was to install SP2).
Did anyone here face such a problem before ?
I'd really appreciate if the experts here can tell a cure for this problem.
thanks,
Ravi
View 4 Replies
View Related
Feb 23, 2007
I have a Visual Studio 2005 solution which contains a Sql Server Integration Services (SSIS) project.
In this solution I have explicitly set a Web application project as startup project, but whenever I edit a DTS package within the SSIS project, VS automatically sets the SSIS project as startup project and the package I edit as startup object.
Needless to say, this may cause some really unwanted incidents when running the solution - thinking that you're about to run the Web application project (that was explicitly set as startup project), but instead, you run the edited package in the SSIS project.
Is there any way to avoid having the SSIS project automatically setting itself as startup project, any workaround here at all? :)
Thanks.
View 4 Replies
View Related
Jun 16, 2015
in order to maintain a deployed project into an Integration Services Catalog I'd like to know if it is possible to import it into a new project inside SSDT.
View 5 Replies
View Related
May 6, 2007
Hi,
I want to update value of a custom field for a perticular project in Project Server 2007 using PSI.
I have created 5 enterprise custom fields(A,B,C,D,E) through PWA/Server Settings.
I want to search all Projects on Server. If any project is having value for custom field A then I want to update rest of the custom fields(B,C,D,E) for that perticular project.
I dont know how to do it please help.
Thanks in Advance
Madhukar
View 5 Replies
View Related
Feb 3, 2007
I have a very small project written in VB.Net 2005 using the SQL Server 2005 SSiS DTSx package.
I took a SQL Server 2000 dts package and using the SQL Server 3005 legacy tools migrated it so I could still use the package withing SQL 2005 until I can build one using BI/SSIS.
Anyway,I added the reference Microsoft.SqlServer.ManagedDTS so I could then use the Microsoft.SqlServer.Dts.Runtime so I can execute the commands:
Dim oApp As New Application
Dim oPkg As New Package
oPkg = oApp.LoadPackage(g_DTSx_Directory & "AOC copy Generic1 CSV to AOC_verify_file_1.dtsx", Nothing)
Dim oResults As DTSExecResult
oResults = oPkg.Execute
Ok. That works fine. Executes without a hitch. So now I try and create a setup project for this and I use the setup wizard.
During the creation of the setup project I get a message that states:
The following files may have dependencies that cannot be determined automatically. Please confirm that all dependencies have been added to the project.
C:windowssystem32msxml6.dll
OK. The dll is part of the reference I mentioned above and I have no idea what other dependencies it may have.
How do I find this out?
Has anyone else created a project like this and experenced the same?
I am on a clean build running WinXP Pro with SP2 - VS2005 with SP1 and the SQL Server 2005 tools.
View 1 Replies
View Related
Apr 20, 2015
I've got an SSIS solution file with project deployment model in VS 2013 and would like to deploy that to SSISDB on different environments.All these days I followed the regular way to create a project in SSISDB and deploy it to that. Now want to find out if i can automate this process and so got some questionsÂ
1. Can we automate the process of creating a project on SSISDB based on our SSIS project name? This will be like when we do a deployment it should check if the project exists or not on SSISDB based on our SSIS project name, if the project exists we just deploy the packages in the project and if the project does not exists in SSISDB it will create that project and deploy the packages.
2. Can we also automate the process of creating environments? In traditional way we manually create the environment variables under environment tab of SSISDB, but can we make that also as part of deployment? Like when we are releasing to Dev server we look if that particular Dev variable exists on that server, if it exists we just update the existing stuff and if it does not exists we just create it.
View 2 Replies
View Related
Mar 31, 2008
I have visual studio 2005 and sql server 2005 with integration service installed on my machine. Couple of days ago, I installed visual studio 2008 professional. When I go to create SSIS project I dont see it in visual studio 2008. What do I have to do to make it appear in visual studio 2008 so that I can create SSIS projects.
Thanks.
View 7 Replies
View Related
Mar 9, 2004
Hello All,
I've been trying to get a range of values out of my SQL Server 2000 db without sucess. The field in question has the data type of char(8) and looks like this:
House_numbr_pub (leading spaces in front of each value)
140A
140
141
142
143
144
145
146
147
148
149
150
151
.
.
.
14500
.
.
.
Does anyone know how write a sql statement that will return 140-150, but excluding the ' 14500' and 100-1000. I tried the following where clause to return a range between 100-1000.
WHERE (cook.STREET_PUB LIKE 'lincoln%') AND (LEN(LTRIM(cook.HOUSE_NUMBR_PUB)) BETWEEN 3 AND 4) AND (
(LTRIM(cook.HOUSE_NUMBR_PUB) >= '100') and (LTRIM(cook.HOUSE_NUMBR_PUB) <= '1000') )
This where clause only return two records (100 and 1000). I want it to return 100-1000.
I also tried the following where clause:
WHERE LTrim(cook.HOUSE_NUMBR_PUB) like '1[45][0-9]'
OR
LTrim(cook.HOUSE_NUMBR_PUB) like '1[45][0-9]'
However, building this on the fly with .net will take some effort if someone is trying to search range 1-10000000.
Please Help,
James
View 3 Replies
View Related
Oct 25, 1999
Is it possible to do the following without cursors or creating an identity column:
I have a table from legacy data with ~ 1 million records. I need to insert this into the new table which has a unique varchar(11) key. For the new system this key is generated by calling a SP that returns the next key in sequence. To put the legacy data records in the same table I want to first create a new column at end of legacy data table and populate this using SQL without going thru using cursor and calling the SP for each and every record to get a unique varchar(11) key.
In short here is what I want:
Field1 Field2 varchar(11)key
------ ------ -----------
jsdhf dsf99 1LEG
878jh whjhj 2LEG
8728jh whjhj 3LEG
8578jh whjhj 4LEG
3878jh whjhj 5LEG
6878jh whjhj 6LEG
8508jh whjhj 7LEG
...
...
...
4878jh whjhj 1000000LEG
How do I generate this key using an SQL stmt?
Thanks in advance,
Nishi
View 4 Replies
View Related
Oct 10, 2007
Hello forum.
I have a problem that is kill me.
Initial dates: a table (Tbl_1) to collect dates from users (within form in VB), a view (View_1) to compute some columns (is a part from business€™ logic) and a table (Tbl_2) designated for a trigger.
I will try to resume the contents of above table€¦
create table Tbl_1
(
id int not null,
code varchar(10) null,
TBO int not null, -- (Time between Overhauling)..hours (life cycle)
T_Hrs_AtLastOvh int null, -- total running hours from last overhauling
TRH int null, -- total running hours (the life of equipment)
)
GO
Create view View_1
as
select code, [TBO]-([TRH]-[T_Hrs_AtLastOvh])as HrsTo_NextOvh
from Tbl_1
GO
create table Tbl_2
(
id int not null,
code varchar(10) null,
Start_dt smalldatetime,
Stop_dt smalldatetime,
)
GO
--drop table Tbl_1
--drop view View_1
--drop table Tbl_2
Let to insert some dates into Tbl_1:
Insert into Tbl_1
select 1,'cod1',2000,2500,3000
union all
select 2,'cod2',3000,4000,7000
union all
select 3,'cod3',1000,2000,2000
union all
select 4,'cod4',1500,3000,3000
GO
The result of View_1 is in Fig.1:
Fig.1
cod1
1500
cod2
0
cod3
0
cod4
2500
cod1
1500
cod2
3000
cod3
0
cod4
2500
Fig.2
The operator perform requested job for the equipment and the life cycle starts counting again. Suppose to have:
Update Tbl_1 set T_Hrs_AtLastOvh=7000 where id=2
GO
The result of View_1 is Fig.2.
I wish to insert (within trigger) into table Tbl_2 all codes that have [HrsTo_NextOvh]=0 from View_1 and automatic to record the date when the record is done with a propertie like €™starting job€™.
After the operator executed the job, he will update the Tbl_1 (the result is in Fig.2) and the trigger has to record this process with the propertie like €˜completed job€™.
Depending by the time between overhauling and the operating hours of equipments, this task happens more or less often.
My intentions are to record the time requested to executed a job and to make a history of events.
Any suggestion to solve my problem is full apreciated.
View 6 Replies
View Related
Jan 1, 2007
I'm having problems implementing the following in reporting services 2005.
My hierarchy looks like this (just to illustrate the problem...):
University->Student->Exam
My query returns the following fields:
University,Student,StudentPayment,ExamName,ExamScore
I need to create a report that will show the hierarchy and to smartly aggregate the StudentPayment to both the Student and the University levels.
The problem is that the StudentPayment field is being multiplied by the number of exams in the upper level aggregation.
If only I could set the granularity level of the StudentPayment measurement...
Note that I don't have access to the query, so I can't change anything on that front.
Thanks,
Efi
View 6 Replies
View Related
Jul 23, 2007
I fail to use project professional 2003 to access to the project server 2003 using MSDE 2000 in local area network, following message was shown,
Connection failed:
SQLState: '01000' SQL Server Error 1326 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect())
Connection failed:
SQLState '08001'
SQL Server Error: 17
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
I have seen these pages with similiar cases but can't help.
http://support.microsoft.com/kb/818047/
http://support.microsoft.com/kb/837653/en-us
Can anyone help me?? Thanks a lot!
View 1 Replies
View Related
May 8, 2002
Hi,
tell me please how I can trace the modification on the table such as "insert" record into one and syncronize mirror table at the same time once the insert has happend, BUT - no indexes no trace jobs, no any modification or objects on the master table... ha?
View 5 Replies
View Related
Jul 20, 2005
I'm still a database newbie so I would like to solicit thoughts aboutthe smartest way to do something in sqlserver.My company has a web application that we customize for each client.We can do this because everything is database driven. We havedatabase tables that contain our HTML and database tables as well assome standard tables for each database. We have an in house app thatlets us tweak both of these things and creates a new web site anddatabase tailored to each project.Each of these sites has a table that stores a schedule are clientsuse.The records in this schedule table change when information in othercustom generated tables change.My company currently uses a legacy foxpro app to update the scheduletable.The foxpro app contacts sqlserver, reads a table with a list of tablesand scheduling information to check, checks each of those items andupdates the schedule table.I would like to lose the foxpro app.At first thought.........as a database newbie.......putting triggersin each of the tables to update the schedule when something changesseems the way to go.However, since we change a part of the schema ( we have an app thatgenerates the database tables unique to each client ) for each clientI would like a scheme that would not involve having to create adifferent trigger for each new table.I would also like something that updates in real time. Right now thefoxpro app is executed once a day.I was thinking of making a large stored procedure and putting anidentical call to that procedure in each table.Each table would have the same trigger in it that would get fired whenthe record was altered. It would call the stored procedure withrelevent arguments to update the schedule.Does this sound like a smart way to solve this problem or am I notthinking "database enough"?Any thoughts are welcome.I would like to build a better solutionSteve
View 1 Replies
View Related
Apr 18, 2006
I'm a bit stuck with this one... hope someone can help.
I'm trying to develop an application that will run on a pocket PC with Windows CE 4.2
I'm using .Net 2003 and the application is in VB.Net.
I can run the application on the pocket pc fine (ie. form paints, buttons work) , until I need to connect to Sql DB on the server.
When I try to create a connection object (Dim dbconnection As New SqlClient.SqlConnection)
I get an error stating .. "This application (test.exe) requires a newer version of .Net Compact Framework than the one installed on the device" .... "could not load System.Data.SqlClient.SqlConnection from assembly System.Data.SqlClient Version=1.0.5000.0"
The version that it is looking for is. 1.0.5000.0 . The VS2003 is using this version.
I've downloaded the compact framework v1. sp3 , ran all the cabs on the Win CE device ... it looked that it installed fine.... but the problem still exists.
Help Please..
Derek
View 12 Replies
View Related
Jul 6, 2015
what is the concept of smart backup in sql ?
View 1 Replies
View Related
Oct 16, 2006
Hey all... great site!
Here's what I'm going for:
I have an 05 VB.NET windows application that will be used as a smart client for our folks in the field. The windows application includes 05 SQL Server Express. I have included in the Data Sources of my project and attached file going through the wizard Microsoft SQL Server Database File (SqlClient) ='s (myfile.mdf) and then selected all tables, views, stored procedures, and functions... the corresponding myfileDataSet.xsd with the myfile.mdf are now located in the root of the project. I now recompile the project without error and go to the properties section Publish tab... select the Application Files button and myfile.mdf Publish Status is set to Include and the Download Group set to Requried. With this in place I right click on the myfile.mdf from the Soultion Explorer and under the properties section have set the build action to compile and use the copy always setting for the Copy to Output Directory.
My app.config looks like this:
<configSections>
<sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="myfile.My.MySettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowExeDefinition="MachineToLocalUser" requirePermission="false" />
</sectionGroup>
</configSections>
<connectionStrings>
<add name="myfile.My.MySettings.ffgscrmConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|myfile.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
After the publish is completed on the client machine... install for Windows Installer 3.1, SQL Server Express, and the Windows Application contains no data but everything else works fine.
My problem is that I need to attach the myfile.mdf to the new SQL Server Express instance on the client machine during the installation process so that when the application fires it will be pointed to the above location on the client.
Any ideas... scripts... includes for an ApplicationEvents.vb on how to do this? Thanks a ton... :)
Kind regards,
BillB
Your mind is like a parachute.. It has to be able to open, for it to work.
View 1 Replies
View Related
Feb 8, 2007
declare @ContactId as integerset @ContactId = 5select *from Person.Contactwhere ContactId = @ContactIdOR @ContactId = -1If you run this in SQL 2005 on the AdventureWorks database,why the logical reads is 561Table 'Contact'. Scan count 1, logical reads 56and not 2 when you run without the second OR condition:declare @ContactId as integerset @ContactId = 5select *from Person.Contactwhere ContactId = @ContactIdHow can i use the same SP and either get one record returnedby passing the ID of the field, or pass a dummy parameter like-1 in order to get ALL the records returned.In this case even when i pass a parameter like ContactID = 5there is still a table scan (clustered index scan in this case)happening for the other OR condition.There's no method to tell SQL to start checking the first conditionwhether or not it is true then if it is false then check the second ORconditon. On the same topic does this mean all OR conditions areALWAYS verified regardless if one of them has already been determinedto be True?Thank you
View 2 Replies
View Related
Jul 12, 2007
Hello geniuses
First of all I would like to announce that this is my first time I post here.. However, I'm pretty sure that I'm in the best place to ask what I want. To cut the story short, I'm querying SQL database on a remote machine and having the result saved (mapped) to another table on another database on the same remote machine. The thing is the destination table was empty before the query was run the first time. I have been searching for some smart way so that when I modify the source tables that my query is based on, it doesn't affect except the modified rows. In other words, it should be like if the row is already there, do nothing. otherwise, it updates the existig record. else, it's a new record and it's inserted. I think what i need will include some coding for sure, yes? I don't know if i'm clear about the requirement or not though! but I know that you are experts and can direct me. Waiting for your valuable replies.
Sherif Magdi
View 11 Replies
View Related
Apr 7, 2008
Hi, I used the following query to update my columns according to the change of time and days of the week. But my query is not working as it should. Today is Tuesday and the time now is 9am so according to my query Mon_Night column should be updated but Sat_Night column is being updated when i execute the query. Please advice..
declare @Weekday bit, @hour int
select @Weekday = datepart(dw,getdate()),@hour= datepart(hh,getdate())
Update Weekly set
Sat_Night=CASE WHEN (@Weekday= 1 and (@hour> 7 AND @hour<=19))
THEN ALD.EngTime ELSE NULL END,
Sun_Day=CASE WHEN (@Weekday= 1 and (@hour > 18 AND @hour < 7))
THEN ALD.EngTime ELSE NULL END,
Sun_Night=CASE WHEN (@Weekday= 2 and (@hour> 7 AND @hour<=19))
THEN ALD.EngTime ELSE NULL END,
Mon_Day=CASE WHEN (@Weekday= 2 and (@hour > 18 AND @hour < 7))
THEN ALD.EngTime ELSE NULL END,
Mon_Night=CASE WHEN (@Weekday= 3 and (@hour> 7 AND @hour<=19))
THEN ALD.EngTime ELSE NULL END,
Tue_Day=CASE WHEN (@Weekday= 3 and (@hour > 18 AND @hour < 7))
THEN ALD.EngTime ELSE NULL END,
Tue_Night=CASE WHEN (@Weekday= 4 and (@hour> 7 AND @hour<=19))
THEN ALD.EngTime ELSE NULL END,
Wed_Day=CASE WHEN (@Weekday= 4 and (@hour > 18 AND @hour < 7))
THEN ALD.EngTime ELSE NULL END,
Wed_Night=CASE WHEN (@Weekday= 5 and (@hour> 7 AND @hour<=19))
THEN ALD.EngTime ELSE NULL END,
Thu_Day=CASE WHEN (@Weekday= 5 and (@hour > 18 AND @hour < 7))
THEN ALD.EngTime ELSE NULL END,
Thu_Night=CASE WHEN (@Weekday= 6 and (@hour> 7 AND @hour<=19))
THEN ALD.EngTime ELSE NULL END,
Fri_Day=CASE WHEN (@Weekday= 6 and (@hour > 18 AND @hour < 7))
THEN ALD.EngTime ELSE NULL END,
Fri_Night=CASE WHEN (@Weekday= 7 and (@hour> 7 AND @hour<=19))
THEN ALD.EngTime ELSE NULL END,
Sat_Day=CASE WHEN (@Weekday= 7 and (@hour > 18 AND @hour < 7))
THEN ALD.EngTime ELSE NULL END
from ALD join Weekly on Weekly.TesterID = ALD.TesterID
View 18 Replies
View Related
Mar 13, 2008
Hi all How can create trigger in sql server project in VB.NET 2.0 ?thanks in advance
View 1 Replies
View Related
Nov 20, 2005
So in a previous thread I discovered that in order to actually subscribe to any publication, the publisher needs to be a well-known network name, requiring DNS resolution. You can't simply point a SQLExpress instance at an ip addressinstance and have it resolve the communications.
View 5 Replies
View Related
Jul 4, 2006
Trying to develop a smart client which will have data centric approach for storage of local data. The server is SQL Server 2000 and foot print database is going to SQL Server Express 2005. Is Merge replication a vaiable option. Can somebody guide me on this approach
Is there any other architecture proposed for Smart client arcjitecture where the data tranfer will be in a couple of GBs. Can somebody tell me more about SOA as well
Thanks!
View 4 Replies
View Related
Apr 19, 2001
Any practical suggestions as to how to elminate this error as result of script executions?
Thanks,
Steve Brown
View 1 Replies
View Related
