I get the following error message in the job history for
synchronization between two SQL 7 machines across the
network.
The process could not read file 'acct.sch' due to OS error
1231.
Is there something to fix this? It has been running fine
for almost 2 years and suddenly quit. There is a firewall
on both sides, if that helps.
TIA,
Cami
Hi all,
View 4 Replies View RelatedHi
I seem to have a strange problem when applying a snapshot when the tables in the publication have been updated while the snapshot was being generated.
Say for example there is a table called RMAReplacedItem in the publication. When the snapshot starts being applied to the subscriber, a stored procedure called sp_MSins_RMAReplacedItem_msrepl_css gets created that handles an insert if the row already exists (ie it updates the row rather than inserting it). However, after all the data has been loaded into the tables, instead of calling this procedure, it tries to call one called sp_MSins_RMAReplacedIte_msrepl_cssm - it takes the last letter of the table name and adds it to the end of the procedure name.
The worst part is that this causes the application of the snapshot to fail, but it doesnt report what the error is, and instead it just tries applying the snapshot again. The only way i have managed to find which call is failing is to run profiler against the subscriber while the snapshot is being applied and see what errors.
I have run sp_broswereplcmds and the data in there is what is applied to the subscriber - ie the wrong procedure name.
All the servers involved are running sql 2005 service pack 2. The publisher and subscriber were both upgraded from sql 2000, but the distribution server is a fresh install of sql 2005.
I get the following error:
Another snapshot is running for the publication.
I just upgraded to Service pack2 and can not get the replication working. I have not clue what is wrong.
Thanks in Advance,
Phillip M. Tricoli
sql version 9.00.3042 on both source and dest servers. the publication has a single article, a table w/ an xml column. when the initial snapshot runs we get the following, any ideas?
Error messages:
Source: Microsoft.SqlServer.Smo
Target Site: System.Collections.Specialized.StringCollection ScriptWithList(Microsoft.SqlServer.Management.Smo.DependencyCollection, Microsoft.SqlServer.Management.Smo.SqlSmoObject[])
Message: Script failed for Table 'dbo.GatewayHeader'.
Stack: at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleSchScript(Scripter scripter, BaseArticleWrapper articleWrapper, Table smoTable)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateObjectScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: Microsoft.SqlServer.Smo, Error number: 0)
Get help: http://help/0
Source: Microsoft.SqlServer.Smo
Target Site: Void CheckTargetVersion(Microsoft.SqlServer.Management.Smo.SqlServerVersionInternal, Microsoft.SqlServer.Management.Smo.SqlServerVersionInternal)
Message: Either the object or one of its properties is not supported on the target server version.
Stack: at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CheckTargetVersion(SqlServerVersionInternal targetVersion, SqlServerVersionInternal upperLimit)
at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.GetTypeDefinitionScript(ScriptingOptions so, SqlSmoObject oObj, String sTypeNameProperty, Boolean bSquareBraketsForNative)
at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.AppendScriptTypeDefinition(StringBuilder sb, ScriptingOptions so, SqlSmoObject oObj, SqlDataType sqlDataType)
at Microsoft.SqlServer.Management.Smo.Column.ScriptDdlCreateImpl(StringBuilder sb, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.Column.ScriptDdl(StringCollection queries, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.Table.ScriptTableInternal(ScriptingOptions so, StringBuilder sb, ColumnCollection columns, IndexCollection indexes)
at Microsoft.SqlServer.Management.Smo.Table.GetTableCreationScript(ScriptingOptions so, StringBuilder sb)
at Microsoft.SqlServer.Management.Smo.Table.ScriptCreate(StringCollection queries, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.ScriptCreateInternal(StringCollection query, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithListWorker(DependencyCollection depList, SqlSmoObject[] objects)
at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects) (Source: Microsoft.SqlServer.Smo, Error number: 0)
Get help: http://help/0
Jonathan
Gaming will never be the same
Hello, I have setup web sync from wm 5.0 and it seems to crash when applying the snapshot. Looking at the column definitions it seems fine. Am I missing something? Thanks in advance.
John
The identity column must be either an integer or big integer data type and cannot be NULL.
HRESULT 0x80004005 (25551)
The SQL statement failed to execute. [ SQL statement = CREATE TABLE "macros" ( "peopleid" numeric ( 18 , 0 ) NOT NULL , "macroid" numeric ( 18 , 0 ) IDENTITY ( 1 , 1 ) NOT NULL , "description" nvarchar ( 255 ) NULL , "rowguid" uniqueidentifier ROWGUIDCOL NOT NULL CONSTRAINT "MSmerge_df_rowguid_8E4B26C6706844BC984B039BA07845B5" DEFAULT ( NEWID ( ) ) ) ]
HRESULT 0x80004005 (28560)
The operation could not be completed.
hi, there;
I got a snapshot agent error:
[SQL-DMO]WriteFile error on '\Mysnapshotunc20071013231104Tracer_4.cft'.
(Source: Tracer (Data source); Error number: 0)
where "Tracer" is one of my tables, but it is never used.
This replication has been used for about three years without anyproblem. But suddenly I got this error.
Does anybody know what cause this and how I can fix it?
Cheers,
Hi guys, does anyone get this snapshot on mirroring. My mirror server had been down for 1 month+ and just up again. Then my principal server will automatic synchronizing with it. Once i create snapshot on the mirror server for checking whether it get the latest record, there's an error msg which shows 'The database must be online to have a database snapshot.' Then I leave it for 1 hour+ for synchronizing and then still the same. Can I get any solution of it? Thx for the assistance.
Best Regards,
Hans
I have a problem when i Want to run the Snapshot Agent in SQL Server 2005. I have done all the tutorial called Replication Data with Mobile Clients and i done the previous tutorial called : Preparing the Server for Replication. But in the Lesson One i can't run the Snapshot Agent but the publicationis good. Can you help me ?
This is the error's code :
Date 25/04/2007 10:44:27
Log Job History (NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2)
Step ID 2
Server NTI-PC-118
Job Name NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2
Step Name Run agent.
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
2007-04-25 09:44:28.29 -Publisher NTI-PC-118
2007-04-25 09:44:28.29 -PublisherDB AdventureWorks
2007-04-25 09:44:28.29 -Publication AdvWorksSalesOrdersMerge
2007-04-25 09:44:28.29 -ReplicationType 2
2007-04-25 09:44:28.29 -Distributor NTI-PC-118
2007-04-25 09:44:28.29 -DistributorSecurityMode 1
2007-04-25 09:44:28.29 -XJOBID 0x893D7BB9E72044489F0A1C1878663E1D
2007-04-25 09:44:28.29 --------------------------------------
2007-04-25 09:44:28.29 Connecting to Distributor 'NTI-PC-118'
2007-04-25 09:44:28.43 The replication agent had encountered an exception.
2007-04-25 09:44:28.43 Source: Replication
2007-04-25 09:44:28.43 Exception Type: Microsoft.SqlServer.Replication.ReplicationAgentSqlException
2007-04-25 09:44:28.43 Exception Message: The remote server "NTI-PC-118" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
2007-04-25 09:44:28.43 Message Code: 14080
2007-04-25 09:44:28.43
Thanks you
Hi
Using HTTPS web synchronisation - merge replication.
I have a very strange error where it bombs out half-way through downloading the snapshot
Downloaded a total of 3 chunks.
Downloaded snapshot file 'snapshot.pre'.
Downloaded snapshot file 'myView_6.sch'.
Downloaded snapshot file 'table2_2.sch'.
Downloaded snapshot file 'table2_2.cft'.
Downloaded snapshot file 'table3_3.sch'.
Downloaded snapshot file 'table3_3.cft'.
Downloaded snapshot file 'mytestProc1_4.sch'.
Downloaded snapshot file 'mytestProc3_5.sch'.
Downloaded snapshot file 'MSmerge_tombstone.bcp'.
Downloaded snapshot file 'MSmerge_contents90_forall.bcp'.
Downloaded snapshot file 'MSmerge_genhistory90.bcp'.
Downloaded snapshot file 'sysmergesubsetfilters90.bcp'.
Downloaded snapshot file 'table2_2.bcp'.
A failure occurred when accessing 'MSmerge_contents_table290_forall.bcp' due to an operating system error [3='The system cannot find the path specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
A failure occurred when accessing 'MSmerge_contents_table290_forall.bcp' due to an operating system error [3='The system cannot find the path specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
The processing of the response message failed.
I've tried compressing the snapshot, and can see the bcp file in the snapshot.
HELP !!!
Bruce...
I am setting up a large number of Push subscribers to a single publication. because of the large number of subscribers, I am not doing the merge with agent jobs, but with SQL RMO. All works well, but from time to time I am getting a funny error when I add a event handler to the snapshotagent, to return the messages, if some feedback to the screen on how the process is getting along.
The error also happen when the process is al most done. Basically when I am not compiling in this line, then NO error.
//Add the Event Handler to receive the Status changes
DynamicSnapshotAgent.Status += AgentEvent;
But once I started getting the error, then it would not go away, sometimes if the publication & subscribers is recreated it goes away but not always, first do not use the event anymore, and at some stage I can put is back after a few succesful dynamic snapshot, then I can enable the event and it will work again........
Any help welkom
Regards
Gertus
Error:
The replication agent had encountered an exception.
Source: Unknown
Exception Type: System.InvalidOperationException
Exception Message: Operation is not valid due to the current state of the object.
Message Code: Not Applicable
Hi,
I'm merge replicating between SQL Server 2005 and SQL Server Compact on mobile devices. I recently had a problem with reinitialization of subscriber databases (please see my previous post, no responses yet...) which I couldn't resolve and had to get 15 subscribers to backup their dbs so I could manually restore each one onto the server. Most of the subscribers were able (yesterday) to then delete their local dbs, create new db files and sync with a snapshot. Today I'm trying to sync a new db with a newly created snapshot and getting the following errors:
2007/08/29 16:23:17 Thread=1118 RSCB=67 Command=SCHK Hr=8004563C An error occurred while reading the .bcp data file for the 'MSmerge_rowtrack' article. If the .bcp file is corrupt, you must regenerate the snapshot before initializing the Subscriber. -2147199428
2007/08/29 16:23:17 Thread=1118 RSCB=67 Command=SCHK Hr=80045017 The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. -2147201001
The only difference from yesterday is that there was a server restart this morning. I have regenerated the snapshot but it still doesn't work. This is only affecting users with new (empty) databases, users who regenerated their dbs yesterday can sync ok.
I have read other posts about folder/file permissions affecting snapshot delivery, but there have been no changes to permissions since successful snapshot deliveries yesterday.
I would really appreciate any help with this. At the moment I have 3 users who can't use the system at all.
Regards,
Greg
I'm running SQL 7.0 SP3 on two different machines (one with additional hotfixes). I'm taking a nightly snapshot of imported data on Server1 and pushing it out to another SQL 7.0 server on our network, Server2. All but one table is copied successfully. On the final table, I receive the message, "The process could not bulk copy into table '"%"'."
Error Information Category: Data Source, Source: Server2, Number 4813.
Full error message: "Expected the text length in data stream for bulk copy of text, ntext, or image data."
I've looked up 4813, but it's pretty ambiguous/generic. Also, when I SELECT from Server1 and INSERT INTO Server2 in the QA, I receive no errors. Does anyone have any insight?
Hi,
i am getting the below error while applying running the Synchronization agent for the Subscriber. I have created replication topology with one central server and one subscriber. Here central server has windows server 2003 and subscriber has windows XP. Both are having SQL server 2005. After creating the merge subscriber, i am runnnig the Synchronization agent manually for the first time. While running that i am getting below error. Anybody aware of this error.
2006-06-24 00:26:00.175 Applying the snapshot to the Subscriber
2006-06-24 00:26:02.722 The schema script 'D_NUM_7.sch' could not be propagated to the subscriber.
2006-06-24 00:26:02.784 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The schema script 'D_NUM_7.sch' could not be propagated to the subscriber.
2006-06-24 00:26:02.816 Category:AGENT
Source: WMBT-07
Number: 0
Message: The process could not read file '\WMBT-01
epldatauncLTR-IN001_TEST_PUB20060624034804D_NUM_7.sch' due to OS error 1265.
2006-06-24 00:26:02.831 Category:OS
Source:
Number: 1265
Message: The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
Hi all,
I have a merge publisher with Snapshot agent for that scheduled to run everyday morning, This was runnning till yesterday. But it is not running today and giving the below error.
Can anyone help me out to solve this error? This is occuring in production environment, i really need a solution as fast as possible.
Error messages:
· Message: Failed to read column data
Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strDataFile)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutWorkItem.DoWork(MergeSnapshotProvider snapshotProvider, IBcpOutProvider bcpOutProvider)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutThreadProvider.DoWork(WorkItem workItem)
at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
at Microsoft.SqlServer.Replication.WorkerThread.AgentThreadProc()
at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
· Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
· Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
· Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Thanks,
Thams
I'm running SQL Server 2005 SP2 64bit under Windows Server 2003 64 bit
The system is the replication distributor as well. Transactional replication.
But I can't create the snapshot!
I have run snapshot.exe repeteadly with all parameters in a command prompt and it crashes at various BCP percentages.
The error is like this:
2007-10-16 00:38:56.32 [10%] Bulk copied snapshot data for article 'Dictionary (part 14 of 20)' (1656 rows).
2007-10-16 00:38:56.32 [10%] The replication agent had encountered an exception.
2007-10-16 00:38:56.32 Source: Replication
2007-10-16 00:38:56.32 Exception Type: Microsoft.SqlServer.Replication.NativeSqlConnectionException
2007-10-16 00:38:56.32 Exception Message: Data conversion failed
2007-10-16 00:38:56.32 Message Code: 02007-10-16 00:38:56.32
2007-10-16 00:38:56.32 Call Stack:
2007-10-16 00:38:56.32 Microsoft.SqlServer.Replication.NativeSqlConnectionException: Data conversion failed
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause)
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.MainWorkerThread.AgentThreadProc()
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper()
2007-10-16 00:38:56.33 [10%] Bulk copied snapshot data for article 'Dictionary (part 15 of 20)' (1487 rows).
2007-10-16 00:38:56.33 [10%] Bulk copying snapshot data for article 'Dictionary (part 20 of 20)'
the fact that BCP continues to copy data after the error makes me believe the crash occurs somewhere else.
How can I isolate the offending table?
Can I capture the BCP commands issued?
Any insight will be appreciated.
We've got a problem with our replication. If I try to run the snapshot agent I get the message "Query for data failed".
The detail view of this message shows the following:
Hi ,
I urgently need a solution for this. I have configured merge replication between a webhoster and a local machine
and it is working perfectly but when I am adding an article (table) which has a CLR assembly associated with it,
the merge replication is failing saying it cannot apply the schema of the CLR assembly at the client. I think Microsoft
supposedly says in it's documentation that merge replication supports CLR assemblies. I have recreated the snapshot
after selecting the table (article) and I have reinitialised the subscription also but it is just not working. It is the simplest
of replication with just one publisher and one subscriber.
Thanks,
Andy
I am using snapshot replication to copy data from one database to another. I truncate the destination table first. The publisher and the subscriber are different databases on the same server. The data turns into 1 unrecognizable row.
Here is what the source table looks like:
displayTypeID, displayType
1, Title List Formats
2, Title Details
3, Title List Export
4, Pricing Notes
5, clone Mask 001
6, clone Mask 002
7, clone Mask 004
8, clone Mask 008
9, hide From Admin
10, not Common Attr
11, Insert Title
12, title Types
The resulting data looks like this:
DisplayType, displayTypeId
, 1660953600
I see no errors in replication and nothing in the source table looks like bad data that could cause such a malady. I see the problem on two different servers now and identified the source of the problem, the column order is reversed in the source and destination tables. The data types do not even match so I would at the very least expect an error from bcp.
I'm creating a publication with a complex filter joining many tables, for replication between SQL Server 2005 and SQL Mobile 2005. Is there a limit on the number of articles, or depth of joins, in the filter? I have a working replication, but when I add another article joined to tables already in there, the snapshot agent status window gives me this error:
String or binary data would be truncated.
Cannot find the object 'MSmerge_ctsv_2C675AF5938E4EA1B7D0DCFF9ECAD9EB', because it does not exist or you do not have permission.
sp_MS_marksystemobject: Invalid object name '[dbo].[MSmerge_upd_2C675AF5938E4EA1B7
The MSmerge_ctsv... system view being referred to DOES in fact exist. But I wonder if there's an internal varchar variable used to hold the join criteria which is too short for what I'm trying to do.
Any help is always appreciated!
Dan
I'm converting an existing production replication process to SQL 2005 for testing. My snapshot for a merge replication is failing.
Environment: Single XP server, no filters, @schema_option = 0x000000000C034DD1
I have several snapshot jobs in my process, 2 for transactional replication and 2 for merge replications. In both types, I'm replicating from A to B and then from B to C. In the failing job, I'm merge replicating from B to C. In this failing snapshot job, the error messages are:
2006-03-01 18:42:17.22 [58%] Bulk copying snapshot data for article 'MyName1'
2006-03-01 18:42:17.34 [58%] Bulk copied snapshot data for article 'MyName2' (0 rows).
2006-03-01 18:42:17.41 [58%] Bulk copied snapshot data for article 'MyName1'(195 rows).
2006-03-01 18:42:29.84 [61%] Discovering dependencies among article objects in the specified publication
2006-03-01 18:42:33.66 [61%] The replication agent had encountered an exception.
2006-03-01 18:42:33.66 Source: Unknown
2006-03-01 18:42:33.66 Exception Type: Microsoft.SqlServer.Management.Smo.FailedOperationException
2006-03-01 18:42:33.66 Exception Message: Discover dependencies failed.
2006-03-01 18:42:33.66 Message Code: Not Applicable
2006-03-01 18:42:33.66
Does anyone have an idea what I could look for to try and fix this?
The A to B snapshot obviously uses the same tables. My snapshot for merge job (which worked) messages for the A to B snapshot are:
Message
2006-03-01 18:40:24.98 Time spent analyzing foreign key references (seconds): 0.00
2006-03-01 18:40:24.98 Time spent analyzing check and default constraint references (seconds): 0.19
2006-03-01 18:40:24.98 Time spent analyzing non-article object dependencies (seconds): 0.42
2006-03-01 18:40:24.98 Time spent preparing snapshot generation (seconds): 35.49
2006-03-01 18:40:24.98 Time spent generating merge replication procedures (seconds): 41.39
2006-03-01 18:40:24.98 Time spent generating merge replication stored procedure scripts for subscribers (seconds): 20.66
2006-03-01 18:40:24.98 Time spent bulk copying data (seconds): 1.25
2006-03-01 18:40:24.98 Time spent copying/compressing generated file (seconds): 0.00
2006-03-01 18:40:25.00 Time spent adding rowguid columns/creating merge triggers (seconds): 1.38
2006-03-01 18:40:25.00 Time spent posting snapshot commands (seconds): 25.97
2006-03-01 18:40:25.00 *******************************************************************************
I kicked off the job again and got a different error message:
Message
2006-03-01 19:17:30.32 ---------------------------------------------
2006-03-01 19:17:30.32 -BcpBatchSize 100000
2006-03-01 19:17:30.32 -HistoryVerboseLevel 2
2006-03-01 19:17:30.32 -LoginTimeout 15
2006-03-01 19:17:30.32 -QueryTimeout 1800
2006-03-01 19:17:30.32 ---------------------------------------------
2006-03-01 19:17:30.32 Connecting to Publisher 'xxx-xxxxxxxx'
2006-03-01 19:17:30.34 Publisher database compatibility level is set to 90.
2006-03-01 19:17:30.36 Retrieving publication and article information from the publisher database 'xxx-xxxxxxxx.xxxxxxxxx'
2006-03-01 19:17:30.54 [0%] The replication agent had encountered an exception.
2006-03-01 19:17:30.54 Source: Replication
2006-03-01 19:17:30.54 Exception Type: Microsoft.SqlServer.Replication.ReplicationAgentSqlException
2006-03-01 19:17:30.54 Exception Message: Data is Null. This method or property cannot be called on Null values.
2006-03-01 19:17:30.54 Message Code: 52006
2006-03-01 19:17:30.54
Does that help provide a clue?
Hi all.
I get the following error when trying to run a pull subscription from the subscriber:
The schema script '' could not be propagated to the subscriber.
(Source: Merge Replication Provider (Agent); Error number: -2147201001)
---------------------------------------------------------------------------------------------------------------
The process could not connect to FTP site 'ftp://ESOFTSERVER.NO-IP.INFO' using port 21.
(Source: ESOFT (Agent); Error number: 0)
---------------------------------------------------------------------------------------------------------------
The connection with the server was reset
(Source: (OS); Error number: 12031)
---------------------------------------------------------------------------------------------------------------
I've tried everything I could to solve this problem, but I can't get it working.
Thanks for any advise.
Fabio Reynoso
We recently migrated our production server from SQL 2005 (Standard) on Win2003(32-bit) to SQL2012 (Standard; v11.0.3000) on Win2008-R2(64bit). Single-server Dell R510 with 1.2TB storage. Everything went smoothly; the only nagging issue remaining is failure of our maintenance jobs. I tracked the issue down to failure of DBCC CHECKDB. Specifically, the error is:Executed as user: NT SERVICESQLSERVERAGENT. The database could not be exclusively locked to perform the operation. [SQLSTATE 42000] (Error 5030) Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be lockedI have Googled this issue and read extensively. For instance, informative blogs (albeit dated) such as these by Paul Randal (Managing
CheckDB by default takes an internal DB snapshot to get the consistent, point-in-time view of the DB that it needs. If that snapshot creation fails, then it will try to get an exclusive database lock before proceeding (same as if you had executed DBCC CHECKDB WITH TABLOCK). The root problem is not that the lock could not be obtained, it's that the internal database snapshot could not be created. msdn.microsoft.com/en-us/library/ms188796.aspx details the specific situations when an internal database snapshot is not created and table locking is attempted.Â
 I have verified the SQLSERVERAGENT service account has full permissions on the SQLDATA directory where the databases reside and has full permissions on each database within the directory. Just for giggles, I created a job (run as SQLSERVERAGENT) that creates and then deletes a text file in the SQLDATA directory. It runs fine.
Also testedI get the snapshot creation error when manually running DBCC CHECKDB against any of our databases and when executing under a variety of administrator accounts that are members of the SQL sysadmin role and the Domain Admins security group (the Domain Admins is a member of the local Administrators group that has full permissions on all SQL directories/folders).
Additionally, the databases in question are small (200MB to 6GB) and the disk has plenty of elbow room (978GB free on 1.22TB RAID5 array) to create the internal database snapshots. CHECKDB doesn't surface an error message that is detailed enough to determine the precise cause of the error. Any example successfully running DBCC CHECKDB on the SQL2012 (Standard) on a Win2008 R2 (64-bit) server.
Hi there,
I have setup merge replication which successfully synchronizes with a group of desktop users using SQL Compact Edition.
However now I have setup Article Filters and when I attempt to regenerate the snapshot I get the following error:
Invalid column name 'rowguid'.
Failed to generate merge replication stored procedures for article 'AssignedCriteria'.
When I look at publication properties at the Articles page.. All my tables have the rowguid uniqueidentifier successfully added to tables and selected as a compulsory published column, apart from the table above "AssignedCriteria".. Even when I attempt to select this column in the article properties page and press ok, when I come back it is deselected again. ( The Rowguid column is however physically added to the table)
I have scripted the publication SQL and then totally reinstalled from scratch, including the database but for some reason it doesn't like this table. I remove the article filters, but still this "rowguid" is never "selected" in article properties.
We are using Uniqueidentifiers in other columns as well for historical reasons, but this doesn't appear to be a problem in other tables..
DDL For this problematic table is as follows
CREATE TABLE [dbo].[AssignedCriteria](
[AssignedCriteria] [uniqueidentifier] NOT NULL,
[CriteriaName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TargetScore] [numeric](5, 0) NULL,
[HRPlan] [uniqueidentifier] NULL,
[ActualScore] [numeric](18, 0) NULL,
[Criteria] [uniqueidentifier] NULL,
[Employee] [uniqueidentifier] NULL,
[IsActive] [bit] NULL,
[addDate] [datetime] NULL,
[totalscore] [numeric](5, 0) NULL,
[isCalc] [bit] NULL,
[Weight] [decimal](18, 2) NULL,
[ProfileDetail] [uniqueidentifier] NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_7FF25DF903B6415FBFF24AC954BC88E4] DEFAULT (newsequentialid()),
CONSTRAINT [PK_AssignedCriteria] PRIMARY KEY CLUSTERED
(
[AssignedCriteria] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
Thanks.
What is a snapshot from replication point of view.
------------------------
I think, therefore I am - Rene Descartes
Dear friends
I am a new fellow to replication.What is the problem I am getting is I am not able to create snapShot.Whenever I start Snapshot Agent it is going for half an hour and it will stuck in the case of one view saying like that 'failed to process bulk copy of data from dbo.syncobj_03x666*'.If I am publishing tables only then also I am getting same error.This view created by system.In my case publiher only working as a distributor.I created a SQL username which have access in subscriber & Publisher.Preferably I will be happy if someone suggest what and all are the primary criterias we have to keep in mind while doing Replication
Thanks in Advance
Filson
The database will grow to 40GB in a short while and I intend to schedule replication every hour. Can this not be done using snapshot replication??
Subject:
From:
Date: Snapshot Replication - Help!! (reply)
MAk (mak_999@yahoo.com)
5/7/2002 12:02:08 PM
Create jobs to copy database and restore database in destination servers
------------
Robert at 5/7/2002 11:00:30 AM
Yes and I would rather not use dts to accomplish this task.
------------
Ray Miao at 5/7/2002 10:02:15 AM
Do you have direct network connection to remote server? Did you try dts?
------------
Robert at 5/7/2002 9:08:06 AM
I've been trying to replicate a database to an off site server using snapshot replication. It is scheduled to run every hour but I've noticed when data is changed at the source it never gets replicated to the destination. Does anyone know why?? I can't use transactional replication beause not all the tables have primary keys and they can't be added due to code. Some tables have id colunms and have been created with the Not for Replication option on the subscriber. Any help will be appreciated.
Thanks
Robert
I can set up snapshot replication for those tables without foreign key constraints. But if there are foreign keys in the table, there will be error
message indicating that this object can not be dropped because it is referenced by ....
Do you have any remedy for that? Thanks
Hi,
I've problem in replicating data thru SNAPSHOT as I've the tables with Foreign Keys at subscriber end. The Truncate table is not working because these tables
were referenced by a FK. Even for recreating table during snapshot is also same problem. Any suggestions?
Thanks
TT
2 questions:
1) In snapshot replication, can the subsciber send info back to the publisher (even in a manual process)
2) In snapshot replication, do we need a distributor set up between the publisher and subscriber if there will only be a single subscriber, or can we write directly to it?
Thanks so much for any and all help!
Hi,
I am replicating all tables in the DB. the tables have PKs,FKs and identity columns. While truncating the data from the tables in subscriber getting
the constraint errors. Please suggest how to get rid of this error.
Thanks
Sam
Hi,
I am replicating all tables in the DB. the tables have PKs,FKs and identity columns. While truncating the data from the tables in subscriber getting
the constraint errors. Please suggest how to get rid of this error.
Thanks
Sam
Hi everybody,
We have merge replication between two servers with Sql Server 2000 Service Pack 2, and the Merge agent display the follow message :
The snapshot for this publication has become obsolete. The snapshot agent needs to be run again before the subscription can be synchronized.
But i have changes at the suscriber, How can I do to Merge the last changes if the merge agentes is stopped.
I appreciate any help.
thanks