I am new to the forum. I need help in solving the following quary.
Table structure: Region: region_id, name Employee: employee_id, name, region_id Sales: sales_id, employee_id, sale_date, sale_amount -there’s an individual entry in the sales table for each sale
Problem Write a query that returns a list of the Regions and the number of employees in each region. The employee only gets added to the count if they had total sales greater than $50,000 last month. Sort the information by the number of employees per region who fit this criteria.
I am very new to SSIS. Can someone give me a basic out line to this problem. I kind of understand control tasks, data flow, etc... but not in details(watched couple of webcasts). I need to see something like below in action to understand this better.
Basically, I need to process a flat csv file on daily basis and load it into a table. As I am loading the records, I will need to verify(on a key column) to see if record exists in table already. If so then just update the record otherwise insert a new record. When I find a record, I need to possibly do a checksum on a set of columns before I do update. So, only update if these set of columns are different from file vs. table. I also need to keep performance in mind as I am processing this record one at a time looking up this record. I am thinking this should be fairly easy but I am getting little lost in control tasks and dataflow as to what goes on what. By the way I am using visual studio 2005 and sqlserver 2005.
I would appreciate your help. thanks again. I dont mind an example solution file.
Hi,I am new to SQL express and try to solve the 4GB size limitation.Is there a possibility to create a new database file every time I getto the limit?How can I do that with C#? how can I create new database file everytime it gets full?Can I be connected to two database files at the same time (the full dband the new db)?thanks in advance,oren
After performing a side-by-side instalation of SQL2005, I am not able to open Enterprise manager (for managing SQL2000 instance). It aborts with some errors related to mmc.exe not being able to use a couple of dlls: semsfc.dll and lmmc.dll. I've tried to unresgister/register them but I get the following error message:
semsfc.dll is loaded, but the dllRegisterServer entry point was not found... This file can not be registered .
I found a similar complaint in the VB forum, which recomended to use Reagasm but I couldn't understand it really, and I'm not sure if it applies to this SQL server issue.
Hi guys, Need some help in some query processing... Here goes,this is the results i have obtained so far |id |cat | name | 1 .....a... apple 1 .....b .. banana 2 .....a ...austria 2 .....b ...brazil 2 .....c ...china 3 .....a ...abraham 3 .....c ...clinton
Column cat can have at most 3 different types of values..{a,b,c}
I wanna write a query such that the result comes out as such <(....id ......a .......b......... c..) corresponding to these fields.>
|Col 1| Col 2 | Col 3 | Col 4| ....1 ...apple ...banana ....2 ...austria .brazil... china ....3 ...abraham ..........clinton
I use SQL Server 2005.I want to create a SP "Search". With this function a user can serach the member database on several criteria: age minimal, age maximal, name, city..BUT these criteria do not necessarily have to be defined by the user, so it might be that a user searches for all members whose age is between ageMin and ageMax leaving the name and city criteria empty.So in my SP I have to check whether these values are empty or not. If a parameter is not empty I have to add it to my selection query.. BUT, I know that SQL Server makes an execution plan, and understood that when you use if-statements the procedure needs to be recompiled every time?Is this true? If so:how does this work then?Is there another way for me to still be able to create this SP?
Hello guys. How is this declared in SQL? Select * FROM my_table if my_column = "1" UPDATE my_table SET my_other_column= "a" ////my_column and my_other_column belong to my_table else if my_column="2" UPDATE my_table SET my_other_column= "b" ////my_column and my_other_column belong to my_table
Hello I have an SQL Data Source i want to compare 2 dates if one is equal to or less than the other i want to return either a string or a true i have been trying combinations for about an hour and it's getting a little frustrating i;ve tried searching for an example but cant find one so somesthing like Select ValuesWhere Date1 <= Date2 Return "String"(orTrue?) also IF date1 <= Today() Return "String OR True" thanks Chris
I have some trade data. One colum is tran_status_mtf. within that column is "settled/traded", "cancelled", and "revised". I want to write and SQL statement that says if the trade is "settled" or "traded" display "A" in my output. How do I do this? I am new to SQL. Thanks in advance guys!!!
I need to create a brief statement in Design View for SQL 2000.
I successfully wrote "isnull(dbo.Data.Parcel,'')in the Column in Design View, which would ensure that a null value would be listed as a blank. Now I need to have dbo.data.status show as 'C&G' in any instance of data, otherwise it will be listed as blank. I tried writing "isnotnull(db0.data.status,'Homestead', '')", but it does not work.
Is there a simple statement I can write in "column" of design view that can get the results that I need?
I have written an sql statement thats using sum. The problem that I have is that when the value is zero it returns Null. Is there a way that I could return zero instead of null.
I am totally new to creating IF statements inside stored procedures. I am passing some parameters from a ColdFusion form to a SP and if the form is empty for the small date I get an error. I would like to be able to check in the procedure to see if the parameter is empty and if it is set a default value for it. Here is my code. @JOB1, @COLLEGEDATE smalldatetime, If(@COLLEGEDATE <> ''") @COLLEGEDATE smalldatetime, ELSE @COLLEGEDATE = getDate(), RETURN @JOB2
Hi guys! I have these commands that insert into two tables, if condition 1 is met, it will insert into the first table, if the second condition is met, it will insert into the second table. Is there a way for the insert statements to be merged so that I won't be executing two statements? Dim update_phase_before As New SqlCommand("INSERT INTO TE_shounin_todokesho_jizen (syain_No,date_kyou,time_kyou) SELECT syain_No,date_kyou,time_kyou FROM TE_todokesho WHERE TE_todokesho.b_a='before'", cnn) Dim update_phase_after As New SqlCommand("INSERT INTO TE_shounin_todokesho_jigo (syain_No,date_kyou,time_kyou) SELECT syain_No,date_kyou,time_kyou FROM TE_todokesho WHERE TE_todokesho.b_a='after'", cnn)
Hello, how can i merge together several select statements? I have something like this: CREATE PROCEDURE Forum_GetThreads @ID int,@AscDesc bitASBEGINSET NOCOUNT ON;SELECT * FROM forum_ansageSELECT * FROM forum_topics WHERE (status = 0) ORDER BY (created) DESCIF (@AscDesc = 0)BEGIN SELECT * FROM forum_topics WHERE (status > 0) ORDER BY (created) DESCENDELSEBEGIN SELECT * FROM forum_topics WHERE (status > 0) ORDER BY (created) ASCENDHere i want to merge them all together and return only one SELECT statement with all the data
I'm running a custom built report on .net page Basically there are a lot categories. I need to run SQL statements for and for each category, the catch is these statements are all in loops for i = 1 to 12. Therefore 108 categories X 12 iterations of SQL calls = a little more that 1200 sql calls from one .net page. There is obviously a major problem with load time and running these reports are painful to the user and the system.
Is there any easier way to possibly pre-compile all the data into a temp database so I wouldn't need to make as many sql calls??????? If so, would a stored procedure handle something like this. Sorry for being somewhat vague.
How do I handle and apostrophes and other punctuation in stored procedure Sql statements: SELECT L_ID, L_NameFROM tblHVACContractorsWHERE (L_Name = 'Mare's Heating & Cooling Services')
Hello, I have SqlDataSource to retrieve a data into DetailsView, or GridView, whatever. I want to use two Select command like this: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="Data Source=AHMED-4714D04B3;Initial Catalog=mp;Integrated Security=True" <% if (( parID == 3) || (ParID ==4) { SelectCommand="SELECT [PID], [PageID], [PageContent], [ParID], [ChiID] FROM [mp_page] WHERE ([ParID] = @ParID)"> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ParID" PropertyName="SelectedValue" /> </SelectParameters> } else {
SelectCommand="SELECT [PID], [PageID], [PageContent], [ParID], [ChiID] FROM [mp_page] WHERE ([ChiID] = @ChiID)"> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ChiID" PropertyName="SelectedValue" /> </SelectParameters> } </asp:SqlDataSource> Is it possible to do something like that ?
I'm trying to combine the following two strings to create a single Insert statement (and thus only generate one record instead of two). insertString = "Insert comments (uID) Select uID FROM users WHERE uName = @uName" insertString2 = "INSERT comments (eventID, text) VALUES ( @eventID, @comment)" I have tried: Insert comments (uID, eventID, text) SELECT uID FROM users WHERE uName = @uName VALUES (uID, @eventID, @comment) Individually they work fine, but I can't get the syntax correct to allow them to work together. As you can tell, I'm not very good with SQL, so any help would be greatly appreciated! Thanks in advance.
I have a web application that has SQL7 as the back end. SQLServer and ORACLE have a feature that allows sql commands to be combined in one statement. Another words I am able to to
SELECT * FROM table_name WHERE id = 2 DROP TABLE other_table
If I type this in a query analyzer It will perform both commands. Is there a way to turn this 'feature' off.
The main reason I want to turn it off is so if a numerical value is sent as a url variable someone can't add the drop table statement or any other sql command to the value of the url variable and have it executed. We have added ample code to trap for this problem but I would like to also handle it at the database level.
I'm having some real problems using the OR condition in a very simple SQL statement and could use your help or insight on where the problem lies, or perhaps a workaround.
I have a large flat table in a SQL 7 database with 10 million + records called "HISTORY". I have not installed either service pack 1 or 2. I'm attempting to run a query that references the following four fields which are all non-clustered keys:
EQUIPMENT_NO TEXT 12 CHASSIS_IN TEXT 12 CHASSIS TEXT 12 SVC_DATE_TIME SMALLDATETIME
Here's the SQL statement:
SELECT * FROM HISTORY WHERE (HISTORY.EQUIPMENT_NO = 'XYZ123' OR HISTORY.CHASSIS = 'XYZ123' OR HISTORY.CHASSIS_IN = 'XYZ123') AND SVC_DATE_TIME >= '01/15/00 00:00:00 AM' AND SVC_DATE_TIME <= '02/28/00 23:59:59 PM' ORDER BY EQUIPMENT_NO
This query takes 11 min. 5 sec. inder the Query Analyzer and ultimately returns the 31 desired records.
If you remove the SVC_DATE_TIME criteria, about 350 records are returned in a matter of seconds. I've also tried variations on the date syntax such as '01/15/00', etc. with no change in the amount of time to execute.
Other queries such as a simple AND condition combining EQUIPMENT_NO and SVC_DATE_TIME are snappy.
Are there known problems/bugs with "OR" conditions in queries that anyone is aware of, particularly with parentheses; am I composing this query incorrectly? Is there some alternate syntax that would work as expected? I can't see where the query shouldn't execute quickly as expected, particularly with all indexed fields involved. I'm stumped! Lend me your expertise. Thanks much.
Clark R. Farabaugh, Jr. Financial Systems Analyst VIT Norfolk, VA
I am having some problems trying to build an sql statement from more than one statement.
Here is the statement
select 'Insert App_Column (Table_ID, Column_Type_Transformation, Column_Name, ) Values (@table_ID,' ,'NULL,', name from payatwork..syscolumns where id in ( select id from payatwork..sysobjects where name like 'Employee_Profile') order by colorder, ')'
What I am finding is that the bracket at the end of the statement is not appearing - how do I append statements to the end of this sql statement (i've tried various combinations of the + sign and the comma without success.
I have a web application that has SQL7 as the back end. SQLServer and ORACLE have a feature that allows sql commands to be combined in one statement. Another words I am able to to
SELECT * FROM table_name WHERE id = 2 DROP TABLE other_table
If I type this in a query analyzer It will perform both commands. Is there a way to turn this 'feature' off.
The main reason I want to turn it off is so if a numerical value is sent as a url variable someone can't add the drop table statement or any other sql command to the value of the url variable and have it executed. We have added ample code to trap for this problem but I would like to also handle it at the database level.
I have 2 piece of code designed to do the same thing. My problem is, i'm not getting the same results.
Code 1 where the results are correct
Code:
select Count(*) as TotalCount, Sum(DistAmt) as TotalSum from table1 inner join table2 on table2.id = table1.id where MailTypeID = 3 AND MailEventID = 2 and table1.IsActive = 1
code 2 - Y is correct, but Z is not, and not only is it not correct, but it is returning a number which equals more then the total rows from the table.
Code:
select Y = sum(case when mailtypeid = 3 and maileventid = 2 and IsActive = 1 then distamt else 0 end), Z = count(case when mailtypeid = 3 and maileventid = 2 and IsActive = 1 then 1 else 0 end) from table1 inner join table2 on table2.id = table1.id
Is there a way to use more criteria in a CASE statement other than CASE WHEN expression THEN value ELSE value END
I need to test if the count is greater than 0. If so, then perform the case statement, else return zeros. Currently there are entries where the values are blank. These blank values are causing errors in the application and unfortunately, I am not able to update these values.
So far I have the following, but I am getting an error stating "An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or select list, and the column being aggregated is an outer reference."
Thanks in advance!
Code:
IF @Qid = 4 SELECT @Exp as Status, COUNT(*) AS Total, @CourseID as CourseID,
(SELECT question FROM tableQuestions WHERE qid = @Qid) AS Question,
IF COUNT(*)>0 THEN
1.0 * SUM(CASE WHEN A.Q1 > 1 THEN 1 ELSE 0 END) / COUNT(*) AS Positive, 1.0 * SUM(CASE WHEN A.Q1 = 0 THEN 1 ELSE 0 END) / COUNT(*) AS Neutral, 1.0 * SUM(CASE WHEN A.Q1 < 0 THEN 1 ELSE 0 END) / COUNT(*) AS Negative, 1.0 * SUM(CASE WHEN A.Q1 = 0 THEN 1 ELSE 0 END) / COUNT(*) AS NA ELSE 0 AS Positive, 0 AS Neutral, 0 AS Negative, 0 AS NA
END IF
FROM table1 A INNER JOIN table2 B ON A.SessionID = B.SessionID
WHERE (B.CourseID = @CourseID) AND (A.SubmitDate >= @BeginDate) AND (A.SubmitDate <=@EndDate)
Im trying to get some of my queries to run a little faster and i think i have an idea on how but i cant seem to get my and IF statements to work
basically what i want is for the different parts of my WHERE clause to run only if certain variables have a value. so something like this
Code:
SELECT * FROM tablename WHERE
IF LEN(@color) > 0 BEGIN color = '@color' END
IF LEN(@size) > 0 BEGIN AND size = '@size' END
so i only want it to limit it by color if @color has a length of more than 0. if there is a better way to do this (other than IF statments) then please let me know.
Im just getting an error saying incorrect syntax near IF
SELECT bms_id,email_address,COUNT(*) INTO #temp FROM emp_db WHERE email_address IS NOT NULL GROUP BY bms_id,email_address ORDER BY bms_id DESC,COUNT(*) DESC
SELECT bms_id COUNT(*) FROM #TEMP GROUP BY bms_id ORDER BY COUNT(*) DESC
How can i put these two statements into a single sql statement.
I want the below sql code to force a error if it falls on a saturday or sunday, and there are no rows in the OrderTrans table for the previous day (TransDate) but not sure how to do multiple if statements.
SET ANSI_NULLS ON GO
SET QUOTED_IDENTIFIER ON GO
CREATE TABLE [dbo].[OrderTrans]( [OrderId] [int] NOT NULL,
