I'm trying to use the PRINT statement to trace what an SP is doing, while
running in QA.
However, some PRINTs seem not to print anything. I can see that the
code part is being executed.
Any ideas? (It's just simple prints like print 'executing an insert' .)
In my SQL2005 SSRS table, I have formatted the numbers to be C0 (currency, 0 decimal places). The numbers display like this: Even the fomat expression builder shows an R in its example!
R 456,220
In the same report, a table immediately above it that I created yesterday is formatted the same way but displays with the correct formatting:
$456,220
What did I do? Thanks!
Hi,
I have several reports out of which only one report is acting weirdly.
The report displays fine when I open it up but when I try to print it,
it only prints the first page. I tried exporting it to PDF and the same
thing, the PDF has only one page. I tried exporting in all formats and
found that PDF and TIF are not working but the other formats (web
archive, HTML, XML and CSV) are fine. The excel format gives me this
error:
Exception of type
Microsoft.ReportingServices.ReportRendering.ReportRenderingException
was thrown. (rrRenderingError) Get Online Help
Exception of type
Microsoft.ReportingServices.ReportRendering.ReportRenderingException
was thrown.
Index was out of range. Must be non-negative and less than the size of
the collection. Parameter name: index
I need the PDF format to work. Any ideas why this particular report is
bad? Another note of interest. This report uses only a subreport that works
fine in another report. Please help.
Thanks,
Anand
I am using SQL RS 2005 with VS2005 in Windows Application. I have placed Report Viewer on Windows From and then report is attached with it. Now report previews well in BIDS as well as in VS2005. Moreover it exports perfectly to pdf and excel but when I click print button on report viewer and give direct print to printer, font size, textbox, rectangle and every other thing become large, like instead of 10 font size, it prints 12, instead of 240 width of rectangle, it prints 280 or so.
There must be some solution to this thing. Some one help
I am getting an error "An error occured during printing (0x80004005)" - when i am trying to print - and the i still am able to print - but only 1 page.
Thre registry key - Reporting services was not there - so i created it at
[HKEY_CURRENT_USERSoftwareMicrosoftMicrosoft SQL Server80Reporting Services]
"LogRSClientPrintInfo"=dword:00000001
Please help - what should i do now ?
My code prints out 0 for the value of charindex ( 'Hello.', '.' ).Did I miss something? I think it should print out 6!
View 1 Replies View RelatedHello, I have a report that looks fine in preview, but when put to PDF or printed contains gaps at the right and bottom.
Here is a picture of the problem: http://northeasttigers.webng.com/pdfproblem.jpg
My tables are the same width as the body, 15.5cm, and the report width is 21cm. Also adding the bottom table's top location attribute to it's height gives the same height as the body.
Any help much appreciated.
Greg
All of my reports that are formatted 11x8.5 are outputting to PDF correctly. When I open the PDF in Adobe Acrobat, it appears in Landscape on the screen. However, when I click the print button, by default it is printing it in portrait. I can go to File-->Print Setup and change the orientation from Portrait to Landscape, but why doesn't it translate from the file orientation? This may just be a bug in the Adobe Acrobat software, but I want to make sure there isn't something I can do.
Thanks.
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
We are having problems printing Reports (when printing by clicking on the AcitiveX print control), where the font for the fields are set to "C39HrP24DhTt" (barcode).
While viewing the report it displays as Barcodes but while printing, the Barcode does not get printed, but the string gets printed.
Environment: SSRS 2005
Using the ReportViewer Control in a .Net 2.0 Web App to render the reports.
BarCodes print fine in the following situations:
1. When the Report is exported to Excel and when printed from there
2. When you click on the print button on Internet Explorer
3. When saving as html (from view source) and opening that html document and printing.
BarCodes do NOT get printed in the following situation:
1. When printing by clicking on the "Print" (Active X Control) icon. Even the "Print Preview" does not show the Barcode.
UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
Why does this T-SQL round incorrectly?PRINT 1/(1+26)when it should be 0.037037037?Thanks,Michael
View 5 Replies View Relatedi would like to enquire about the Print statement. If I do not want to use the Raiseerror to raise an error as its not an error, but want to just print out in a dialog box, how do i do it?I tried using the Print statement but nothing happened. I am using this inside my trigger, can someone help?Thank You
View 1 Replies View Relatedcount record from database and assign that value in a variable.and now i want to print that variable in table in td (column)Please tell me how can i?
View 2 Replies View RelatedThis is so stupid of a question but is there a simple way to print (to a printer) the results of SELECT * FROM SkillGoals --- To show all data(including column headings?)
View 8 Replies View RelatedI have a long running (48 hour+) stored proc. I've added PRINT statements that print "1%", "2%", etc to provide progress so I can get a ballpark idea of how far along the process is. I ran the stored proc and realized that this won't work. I don't see the output of the print statements until the stored proc is completed. I'm running this from Query Analyzer (SQL Server 2000 SP3a).
For example, the following will wait ten seconds and then print both statements; it doesn't print one then wait, then print the other. Is there any flush command to make the print statements take effect immediately?
PRINT 'before'
WAITFOR DELAY '000:00:10'
PRINT 'after'
Is there an easy way to print off a sql table ? I wanted something along the lines of an Access query that you can print. Or is it easiest to link to the SQL table and use Access to display it ?
View 4 Replies View Relatedjust wanted to get sql to stamp the date/time to the screen when i'm running a query.
i tried:
print 'Formatting Table1'
print datetime
go
got the following error:
Msg 128, Level 15, State 1, Line 2
The name "datetime" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Hi,In the query analyser if I type the following:DECLARE @SortOrder integerexec pr_Admin_SetFieldSortOrder @SortOrderprint @SortOrder@SortOrder is never printed. I just get the message saying that theQuery Batch Completed.Why ?Regards
View 2 Replies View RelatedPrint button is disabled for some users. Don't know why it is doing so? Works fine for most of the users in the same group.
Any help is much appreciated.
SQL SERVER Reporting Services 2000
Win XP
I want to put some trace in the a UDF, so I put print in the function. IT gave error. Can anyone please explain why this happen. But this work with SPs.
Cheers
Shimit
I have a web application with a stand alone report. When I put the ReportViewer in the webform I can see every reports in the project. The problem is that I can't see the print report button...
If I indicate that the report is a "Server Report" instead a local report the Print Report appear, but a need a "Local Report" not a "Server Report" How can i solve that.
Thank you.
I have created a report which contains grouping. Yesterday I learnt how to add a boolean paramter to expandAll. Now in my ASP.Net front end I am using ReportViewer to retrieve the report...
Now I want to introduce a "Print Version" and "Normal Version" (print version being all rows showing (expanding all grouping) and normal being groups showing....
Will this work?
Use javascript to create to div... 1 showing ReportViewer1 where expandAll parameter is true and div 2 containing ReportViewer2 where parameter is false...a radiobutton conrolled by javascript code will hide 1 div and show the other?!
For some reason it doesnt load the report in ReportViewer2?!
Please help!
Thanks!!!
Hi,
I created a parameterized report. When end user select different values from the parameter drop down list , he/she can see the corresponding report for each value.
Now end user wants to print all those reports at the same time , without selecting each report by changing the parameter values.
Is it possible in SSRS 2005?
Thanks
I created a function that returns a sequence of dates between @LowLimit and @HighLimit. The problem that I'm having is if a bad date is passed into the function I get this error:
Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
So I tried using:
IF @@ERROR = 242
PRINT N'Must use a valid date.';
which gives this error when I try to create the function:
Msg 443, Level 16, State 14, Procedure fnDates, Line 10
Invalid use of side-effecting or time-dependent operator in 'PRINT' within a function.
Here's my code:
CREATE FUNCTION [dbo].[fnDates]
( @LowLimit DATETIME, @HighLimit DATETIME )
RETURNS @Values TABLE
( Value DATETIME )
AS
BEGIN
IF @@ERROR = 242
PRINT N'Must use a valid date.';
DECLARE @Temp DATETIME
DECLARE @DateCtr int
SET @DateCtr = 0
/* This allows you to enter the later date first */
IF @LowLimit > @HighLimit
SELECT @Temp = @LowLimit,
@LowLimit = @HighLimit,
@HighLimit = @Temp
INSERT into @Values
VALUES (@LowLimit)
WHILE DATEADD(dd, @DateCtr, @LowLimit) < @HighLimit
BEGIN
SET @DateCtr = @DateCtr + 1
INSERT into @Values
SELECT DATEADD(dd, @DateCtr, @LowLimit)
END
RETURN
END
I am using MSDE and WebMatrix. My stored procedure is creating a Dynamic SQL query and is is about 200 lines long.
I am not getting the expected results, but also not generating any errors. I inserted a Print statement to print the resultant SQL query, but I don't know how to see or display that print result.
I do NOT have SQL2000, only MSDE. I am using WebMatrix and VB.net to create my application. Is there some class in asp.net that will help me, or some free utility. One of the problems is that the dynamic SQL is using over 20 parameters to create the query; the end result of the user picking fields on the webform.
Hi,
Is is anyway to print out the result from OLAP cube?
Thanks in advance.
David
I just started with SQL 7 and I would like to know how to print
out the structure of a table in SQL 7.
thanks in advance.
I am testing a simple stored proc below.
create procedure procpooh @val1 int, @val2 int as
insert into pooh (val1, val2)
values(@val1,@val2)
declare @error int
SELECT @error = @@ERROR
IF @error <> 0
BEGIN
print 'it failed'
RAISERROR(50020,16,1,@error)
end
When I run the proc and feed it the values it fails(that' what I expect)
because there is a field not being supplied which will not allow nulls.
However neither the print ' it failed ' or the raiserror work. I get the message below instead. Any ideas why the print or raiserror don't work?
Server: Msg 515, Level 16, State 2, Procedure trpooh, Line 11
Cannot insert the value NULL into column 'val3', table 'Chapter5DB.dbo.pooh2'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Why osql igores parameter -w for command PRINT... and why cut the last character ????
osql -S<Server> -d<DB> -E -Q"Print replicate('ab',250)" -otest.txt -n -h -b -w1000
this one example returns two rows, first has 255 characters and second only 244 characters...
This has to be a very simple think to do, but, I`m new....
Have NT4.0, SQL6.5, and existing database with about 30-40 tables.
Just want to be able to print out each table structure with record info. Don`t need the actual data printed, just the table/record structure.
Thanks, and again, I`m new to SQL/Query so go easy on me.... ;-)
Ron
How can I print a table design. I know that I can display the design by right clicking on a table and selecting DESIGN. However, there are no options in this screen to print the design.
I also tried creating a diagram for a table. I can print the design from the diagram window as long as it fits in the window. However, when I have more columns than can fit on my screen, the print command will only print what is displayed.
Is there an easy way to print the design of a table in SQL 2000?
Thanks
Joel Isaacson
Hi,
I cannot figure out how to print the design of a tabel.
What I need is to have printed on a paper the list of the columns, data type, length, allow nulls and description for a table.
thx