Some Columns Not Populated In Data Flow Destination
Mar 13, 2007
I am populating a table using a SQL command. very simple.
SELECT RISKID
,RISKIDREN
,RISKIDEND
,PREMIUMSUBTOTAL
,PREMIUMTOTAL
,SURCHARGE1
,SURCHARGE2
,SURCHARGE3
,SURCHARGE4
,SURCHARGE5
,COMMPREMIUM1
FROM PREMIUM
However, the first three columns are not being populated in the destination table. The other columns come over fine.
The SQL stmt. returns data as expected when run against the source database.
I deleted the source and destination and recreated the flow to prevent metadata mapping issues. In the source editor preview I see all of the columns and data. In the destination editor preview, the first three columns of data are null ???.
It appears that the columns are not mapping properly even though they are in the source and destination of the mapping editor.
I have made sure that the destination mapping contains all the columns in the UI.
The source and destination have the columns represented in the advanced editor metedata. I also checked the XML to verify that the columns are in the destination.
There is a row count between the source and destination. which should have no effect.
This is a part of a larger DW load where I have 10 other tables populated within the dataflow. I also do not get any validation, or error messages. So, I have eliminated truncation errors or the like.
I am really puzzled. Has anyone run accross anything like this?
View 5 Replies
ADVERTISEMENT
Aug 1, 2006
I can't seem to find a way to make the Data Flow Destination in a Business Intelligence Visual Studion Project output an MDB file for Microsoft Access.
View 4 Replies
View Related
Apr 3, 2014
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies
View Related
May 12, 2006
I am getting the following error running a data flow that splits the input data into multiple streams and writes the results of each stream to the same destination table:
"This operation conflicts with another pending operation on this transaction. The operation failed."
The flow starts with a single source table with one row per student and multiple scores for that student. It does a few lookups and then splits the stream (using Multicast) in several layers, ultimately generating 25 destinations (one for each score to be recorded), all going to the same table (like a fact table). This all is running under a transaction at the package level, which is distributed to a separate machine.
Apparently, I cannot have all of these streams inserting data into the same table at one time. I don't understand why not. In an OLTP system, many transactions are inserting records into the same table at once. Why can't I do that within the same transaction?
I suppose I can use a UnionAll to join them back together before writing to a single destination, but that seems like an unnecessary waste and clutters the flow. Can anyone offer a different solution or a reason why this fails in the first place?
Thanks in advance.
View 3 Replies
View Related
Dec 10, 2007
Is there a default destination component used when a new data flow is created? The reason I ask is simply curiosity. I have an xml file with 2 pieces of data: item A and item B. A should simply get copied out of the file. B should undergo a quick transform. I set up an XML source such that two columns are mapped correctly to the XML source data of A and B. I set up my data transform task as well. So, if I leave those two components on the .dtsx page with no other components, then will there be a default data flow destination already created? ...OR, do you always have to have a destination component?
Thanks for the input. I am just curious.
View 4 Replies
View Related
Sep 26, 2007
I have a series of data flow tasks that I want to output to a temp table. I've set the data source for RetainSameConnection and the Data Flows are DelayValidation. The OLE DB data source inside the Data Flow works fine, but the data destinations don't offer a # or ## as a target. I've tried every destination that sounds logical, without success.
Any pointers? ... Thanks!
View 6 Replies
View Related
Jan 19, 2006
I have a data flow that reads multiple rows from a table and then inserts to another table for each row. I use an ole destination for my inserts. However, after that insert I need to do other table inserts and I can't figure out how to continue the data flow with the fields in the pipeline. Out of the destination is only the Error flow - Is there a way to do this ?
thx
View 5 Replies
View Related
Mar 14, 2007
I would like to extact data from a source system even if it has errors. Then I can transform it and handle the errors in the appropriate manner. Are there any loosely-typed Data Flow Destinations?
View 11 Replies
View Related
Nov 28, 2007
I have 5 or more tables to join to get a particular output which has to be sent to a destination table. In the 5 tables some are inner joins and some are left outer join. I am opting for stored procedure at this point. But I would like to know how can this be done in data flow transformations having multiple souce and merge joins or any other alternates. I tried using merge join, but this does not accept more than two tables.
I saw this simple post which kick started me to use ssis transformations to stored procedures. But I encounter issue.
http://www.mssqltips.com/tip.asp?tip=1322
error
"The destination component does not have any available inputs for use in creating a path".
Please advice alternates
View 3 Replies
View Related
Nov 9, 2006
Hi
Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.
MA
View 4 Replies
View Related
Oct 2, 2007
I have an update query in an OLE DB Destination (access mode: SQL Command) that updates a table with an INNER JOIN from another table in another database. I'm getting the error, "No disconnected recordset available for the specified SQL statement". Does this have to do with the SQL query trying to access the other database? How can I get around this error?
View 4 Replies
View Related
Jun 26, 2007
I want to insert data calling a stored procedure and call this from a Data Flow destination object. Is it possible?
I understand that Ole Db Command transformation object can call stored procedure, but that will not rollback in the event of error in the middle.
I understand that Ole Db Destination object will rollback in middle of import, but I don't see how to do the insert by calling stored procedure. "Sql Command" option in Ole Db Destination object does not seem to present solution to the problem.
Am I missing something here or is Ssis / Microsoft demanding that Insert stored procedure not be used when using Data Flow destination object to insert data into target table?
View 8 Replies
View Related
Mar 7, 2008
Hi all,
I have a package that does simple exporting from an excel sheet to a table.
I used a Dataflow task with Excel Source and OLEDB Destination Components.
And i created Package configurations for Source and Destination Components.
After than when i execute the package i get the following error.
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".
SSIS package "ProductDetails_Import.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "ProductDetails_Import.dtsx" finished: Failure.
The program '[2416] ProductDetails_Import.dtsx: DTS' has exited with code 0 (0x0).
I have been trying to troubleshoot the error message given below from last evening.
I have been trying to troubleshoot the error from last morning.
Counld not figure out what is causing this error to occur.
Please help!!!!
Any pointersSuggestions would be highly appreciated.
Thanks & Regards
View 3 Replies
View Related
May 16, 2008
Hi,
How do I retrieve the connections (connection managers) collections from Custom Data Flow destination? ComponentMetadata.RuntimeConnectionCollection is empty. I would like to be able to access all the connections defined in the package from the custom data flow task.
I came across code in which it was possible to access the Connections collection using the IDtsConnectionService for custom task (destination). The custom task has access to serviceProvider, whcih can be used to get access to the IDtsConnectionService interface but not the custom data flow task.
Any help appreciated.
Thanks
Naveen
View 5 Replies
View Related
Dec 14, 2007
Hi there,
I have a Data Flow task which uses an XML File Source with six parellell Outputs, each going firstly to a Data Conversion Task, then the results of each end in a SQL Server Destination Object. (All using the SQL Native Client)
To eplain this further, the Xml file contains 6 different types of elements, the Dataflow splits out each type of element and processes them into different tables. The Data Transformation object exists only because the XML fields are Uni-code and the table fields are VarChar not nVarChar.
Initially using this setup I found that the Connection would timeout using the SQL Native Client so I changed the Timout on the Destination Objects to 0. This fixed the problem to some degree, however at present I can run the Pakage using the Visual Studio enviroment and everything works fine, no problem. When I run the Dtsx file using the SQL Server Agent, I end up getting the error below...
Error: 2007-12-14 14:33:19.16 Code: 0xC0202009 Source: Import XML File to SQL SQL - CP [2746] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from
I understand that this error is somewhat of a 'catch all' and that the way the Native SQL Server Connection object works makes Error Capturing difficult. I have tried a few things which I will list as I'm sure they will be suggested...
I have played around with the 'MaxInsertCommitSize' property of the SQL Server Destination Objects to no avail (IE, changing to 50000, 10000, 1000 all of which resulted in the same problem)
I am running the ssis pakage from the server which is the destination
As mentioned above the Timeout on the SQL Server Destination Objects is set to 0
What I have already mentioned and still don'tt quite understand is that I can run the job successfully from the Visual Studio enviroment but as a job run off the SQL Server it fails...
Can
View 8 Replies
View Related
Oct 18, 2015
We have a single generic SSIS package that is used to import several hundred iSeries tables into SQL. I am not looking to rewrite the process. But I am looking for ways to improve performance.
I have tried retain same connection, maximum insert commit size, lock table (tablock), removed some large columns, played with the log file location and size, and now I am working to tweak the defaultbuffermaxrows.
To describe the data flow task - there are six data flows tasks (dft)  working at the same time. Each dtf has their own list of iSeries tables and columns and the corresponding generic SQL table names. Each dtf determines their list of tables based on the number of columns to import. So there is dft30 (iSeries table has 1-30 columns to import), dtf60 (iSeries table has 31-60 columns to import), etc. The destination SQL tables are generically called Staging30, Staging60, etc. Each column in the generic Staging tables are varchar(100). The dtfs are comprised of an OLE DB Source and an OLE DB Destination.
The OLE DB Source uses a SQL Command from Variable to build a SELECT statement. The OLE DB Source uses a connection manager that uses an IBM iAccess IBMDA400 provider. The SQL Command ends up looking like this for the dtf30. This specific example is importing from the iSeries table TDACLR and it only has two columns so it will be copied to the Staging30 table.
select TCREAS AS C1,TCDESC AS C2,0 AS C3,0 AS C4,0 AS C5,0 AS C6,0 AS C7,0 AS C8,0 AS C9,0 AS C10,0 AS C11,0 AS C12,0 AS C13,0 AS C14,0 AS C15,0 AS C16,0 AS C17,0 AS C18,0 AS C19,0 AS C20,0 AS C21,0 AS C22,0 AS C23,0 AS C24,0 AS C25,0 AS C26,0 AS C27,0 AS
C28,0 AS C29,0 AS C30,''TDACLR'' AS T0 from Store01.TDACLR
The OLD DB Source variable value looks like the following, but I am not showing the full 30 columns
select cast(0 AS varchar(100)) AS C1,cast(0 AS varchar(100)) AS C2,cast(0 AS varchar(100)) AS C3,cast(0 AS varchar(100)) AS C4,cast(0 AS varchar(100)) AS C5, ... cast(0 AS varchar(100)) AS C30.
The OLE DB Destination uses OpenRowSet Using FastLoad From Variable. The insert into Staging30Â ends up looking like this.
insert bulk STAGE30([C1] varchar(100) ,[C2] varchar(100) ,[C3] varchar(100) ,[C4] varchar(100) ,[C5] varchar(100) , ... ,[C30] varchar(100) ,[T0] varchar(20)
Of course we then copy and transform the Staging30 data to the SQL table that equals T0.
But back to defaultbuffermaxrows. Previously the dtfs had default values of 10000 for DefaultBufferMaxRows and 10485760 for DefaultBufferSize. I added a SQL task to SUM the iSeries column sizes, TCREAS and TCDESC in this example, and set the DefaultBufferMaxRows by dividing the SUM of the columns max_length into 10485760. But I did not see a performance improvement. Do you think that redefining the columns as varchar(100) for the insert is significant? Should I possibly SUM the actual number of columns (2) as 2x100 or SUM the 30x100?
View 4 Replies
View Related
Mar 8, 2008
I have a data flow that consists of
OLE DB source which calls a stored proc that returns a result set
data conversion
Excel destination
I am in design mode in Business Intelligence studio. My excel destination (with an Excel Connection) shows no sheet name though I have an execute SQL task before the data flow to create the excel table called SHEET1. Needless to say, there are no output columns visible to do any mappings. I did go to the ExcelConnection to set the OpenRowset Property to SHEET1 but it seems to have no effect.
I can do the export in SQL Server Management studio and that works fine, but it is basic and does not meet my requirements. I have to customize the package to allow dynamic Excel filenames based on account names and have to split my result set into multiple excel sheets because excel 2003 has a max of 65536 rows per sheet. Also when I use the export wizard, I have the source as a table and eventually the source has to be a stored proc with input parms.
What am I missing or doing wrong? Thanks in advance
View 6 Replies
View Related
Feb 13, 2006
Seems obvious but I can't see how. How would I remove columns from a data flow so that columns which have been used earlier but are not needed for insert/update are taken out of the flow.
I'm asking because the data ends up in a update statement and the flow has got so big it is unreadable.
Cheers, Al
View 4 Replies
View Related
Sep 28, 2006
Hi,
I'm just wondering what's the best approach in Data Flow to convert the following input file format:
Date, Code1, Value1, Code2, Value2
1-Jan-2006, abc1, 20.00, xyz3, 35.00
2-Jan-2006, abc1, 30.00, xyz5, 6.30
into the following output format (to be loaded into a SQL DB):
Date, Code, Value
1-Jan-2006, abc1, 20.00
1-Jan-2006, xyz3, 35.00
2-Jan-2006, abc1, 30.00
2-Jan-2006, xyz5, 6.30
I'm quite new to SSIS, so, I would appreciate detailed steps if possible. Thanks.
View 3 Replies
View Related
Apr 30, 2015
I need to query some hierarchical data. I've written a recursive query that allows me to examine a parent and all it's related children using an adjacency data model. The scenario is to allow users to track how columns are populated in an ETL process. I've set up the sample data so that there are two paths:
1. col1 -> col2 -> col3 -> col6
2. col4 - > col5
You can input a column name and get everything from that point downstream. The problem is, you need to be able to start at the bottom and work your way up. Basically, you should be able to put in col6 and see how the data got from col1 to col6. I'm not sure if it's a matter of rewriting the query or changing the schema to invert the relationships.
DECLARE @table_loads TABLE (column_id INT, parent_id INT, table_name VARCHAR(25), column_name VARCHAR(25))
DECLARE @column_name VARCHAR(10)
INSERT INTO @table_loads(column_id, parent_id, table_name, column_name)
SELECT 1,NULL,'table1','col1'
[code]...
View 4 Replies
View Related
Jan 6, 2007
Hello,
I am new to SSIS.
I am trying to write a simple package to export data from some SQL 2005 tables and into a flat file.
In my data flow, I am using the OLE-DB data source and then the flat file destination.
This all works fine except that I cant get the package to write the columns out in the order I want. Even when I drive the OLE-DB source by a query, they columns are getting written to the flat file in a different order than I want.
How is SSIS determining what order to write the columns in and, more importantly, how can I change it to do it in the order I want?
Please help if you can. As mentioned I am new to SSIS so please give clear+simple answers.
Thanks
Mgale1
View 5 Replies
View Related
Jul 10, 2006
I keep getting a waring:
[Production IDW [1]] Warning: Truncation may occur due to retrieving data from database column "Industry" with a length of 16 to data flow column "Industry" with a length of 8.
When I look at the industry lookup table the column size is 50. But the data flow metatdata is saying the oclumn is 8. How can I change the data flow column? When I try to edit it and click on metadata it is uneditable. The field it is matching to is 50 and the field it is coming from is 16.
View 10 Replies
View Related
Dec 19, 2006
Hi:
I have a data flow task in which there is a OLEDB source, derived column item, and a oledb destination. My source is a SQL command, that returns some values. I have some values, that I define in the derived columns, and set default values under the expression column. My question is, I also have some destination columns which in my OLEDB destination need another SQL command. How would I do that? Can I attach two or more OLEDB sources to one destination? How would I accomplish that? Thanks
MA2005
View 9 Replies
View Related
Jul 30, 2007
I need to loop the recordset returned from a ExecuteSQL task and transform each row using a Data Conversion task (or a Script Task).
I know how to loop the recordset returned by an ExecuteSQL task:
http://www.sqlis.com/59.aspx
I loop the returned recordset (which is mapped to a User variable of type System.Object) and assign the Variable Mappings in the ForEach Loop to different user variables which map to the Exec proc resultset (with names and data types).
I assume to now use these as the Available Input columns for the Data Conversion task, I drag a Data Flow task inside the For Each Loop container and double-click it, then add a Data Conversion task.
But the Input columns (which I entered in the Variable Mappings in the ForEach Loop containers) dont show up in the Available Input columns of the Data Conversion task.
How do I link the Variable Mappings in the ForEach Loop containers from the recordset returned by the Execute SQL Task to the Available Input columns of the Data Conversion task?
.......................
If this is not possible, and the advice is to use the OLEDB data flow as the input for the Data Conversion task (which is something I tried too), then the results from an OLEDB Command (using EXEC sp_myproc) are not mapped to the Available Input columns of the Data Conversion task either (as its not an explicit SQL Statement and the runtime results from a stored proc exection)
I would like to use the ExecuteSQL task to do this as the Package is clean and comprehensible. Which is the easiest best way to map the returned results from a Stored proc execution to the Available Input columns of any Data Flow transformation task for the transform operations I need to execute on each row of data?
[ Could not find any useful advice on this anywhere ]
thanks in advance!
View 4 Replies
View Related
Aug 29, 2007
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
View 15 Replies
View Related
Feb 14, 2006
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
View 2 Replies
View Related
Jan 21, 2008
I am tring to figure out how to simplify the process of populating a database created by an application with the same database, only with data already in it. So far i have created a backup of the database and used that backup file with SQL server management express to overwrite the existing database with that backup file on a new computer so the program will have data when initally installed for Demonstration purposes. I was hoping there was an executable script that i could use, so that when someone wants a demonstration of our product, they can see its options and functionallity with data available. Maby i am going about this the wrong way, i need to know if there is a way that when our program is installed an executable can simply be run to populate our database with a backup of our sample database. Any imput would be helpful.
Thanks.
Isaias
View 3 Replies
View Related
Mar 9, 2007
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Thanks,
Steve
View 17 Replies
View Related
Jan 17, 2008
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
View 3 Replies
View Related
May 17, 2007
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
View 4 Replies
View Related
Jan 12, 2006
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
View 2 Replies
View Related
Aug 25, 2015
writing a T_SQL query for the following scenario..I have a SQL DB Audit file that gets populated with data as the activity on DB goes on.I have multiple monthly tables setup that the import should go into these monthly tables based on the event_time value in the SQL DB Audit file.all the data Like event_time '2015-08-25 15:59:39.033' should go to SQL table Audit_tbl_Aug2015 Query for reading SQLDB Audit file
SELECT * FROM sys.fn_get_audit_file ('C:ackupAudit*',default,default)
order by event_time desc
GO
--DML for Audit table CREATE TABLE [dbo].[Audit_tbl_Aug2015]( [id] [bigint] IDENTITY(1,1) NOT NULL, [event_time] [datetime2](7) NOT NULL, [sequence_number] [int] NULL, [action_id] [varchar](4) NULL, [succeeded] [bit] NOT NULL, [permission_bitmask] [bigint] NOT NULL, [is_column_permission] [bit] NOT NULL, [session_id] [smallint] NOT NULL, [server_principal_id] [int] NULL, [database_principal_id] [int]
[code]...
View 2 Replies
View Related
May 18, 2008
SSIS Newbie Question:
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow
Can someone help me with this?
Signed: Clueless with a deadline approaching...
View 3 Replies
View Related
