Look for recommendations for the best product out there to facilitate both source control and code deployment. Typical features I would be looking for are bullet below:
Control object versions
Tracking
History
Automated feature
Capture database changes
Roll-back feature (should such a thing exist)
Thanks
Hi,
We use a lot of stored procedures within our project and I am looking for a source code/versioning control software that can be used with SQL Server 7.0 to track any changes to these stored procedures. Does anyone have any suggestions?
Thanks in advance,
Darrin Wilkinson
Hi,
I was wondering if anybody could advise on source code control for SQL Server express, for the table schema and stored procedures?
I currently use Sourcesafe V6 to work with visual studio 6 and 2003 (although it isn't integrated in 2003), and wondered if that can be used?
Any suggestions would be greatly appreciated, as I see this as a disaster waiting to happen!
Thanks in advance.
Mark
I am having an issue with report printing. I have used a specific font (Garamond) for all the report elements when creating the report in Bus Int. Dev. Studio. While printing from the preview pane, the report prints with the Garamond font (as intended).
But the issue is that after deployment, printing the report (with browser print control) does not print it with the Garamond font (looks like it is using the Arial or a similar font). This changes the whole look and feel of the report. I have tried printing the report from the reportserver, report manager and through URL access. All the 3 methods are giving similar results that the print output is not using the on-screen font.
Anybody else face similar issues? Is there any workaround for this? TIA.
Hi,
I have created bunch of reports using SSRS. Now I want to deliver all of these reports together. I can use data driven subscription in Report Manager. But that feature allows to deliver one report at a time. Can anyone tell me how to deliver all reports together?
Requirement is reports should be delivered to dirrent departments. These reports have parameterized. Can anyone tell me how to do this? at least if somebody provides sample codes I really appriciate.
Thanks
p/s ;
I found this one on MSDN. But I'm not sure whether I can change this and use for multiple reports subscription. I dont hv a good knowledge on C# or VB. Please can anyone help me to modify this? I think we can use a loop or smthing.
http://msdn2.microsoft.com/en-us/library/microsoft.wssux.reportingserviceswebservice.rsmanagementservice2005.reportingservice2005.createdatadrivensubscription.aspx
Is anybody aware of how I can audit redundant Stored Procedures [SP] out of a large application. I only have the SQL-Server (no Sourcesafe/CVS). I need to know when an SP was last accessed. There are over seven hundered SPs.
Any help appreciated
Neil.
I am working with Telerik's new rad grid that is helping us speed up our development process. I also have a VB code behind page for the aspx form that does my sql database connection and statements. From the aspx form I also have a user control. The user control allows me to format my edit area within the rad grid in html and asp.net which allows me full control. This user control is an ascx page referenced in my aspx form. I know this is getting confusing so let me get to the point. My control page has an button with CommandName="Update". The vb codebehind for this page looks like:
Imports SystemImports System.DataImports System.CollectionsImports System.Web.UIImports System.Data.SqlClientImports Telerik.QuickStartImports Telerik.WebControlsPartial Class UserDetailsInherits System.Web.UI.UserControlSub Btn_Update(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnUpdate.ClickDim MySqlConnection As New SqlConnection("Data Source=")Dim UserAdapter As SqlDataAdapter = New SqlDataAdapter("SELECT * FROM WebUsers", MySqlConnection)Dim UserDT As DataTable = New DataTable()UserAdapter.UpdateCommand = New SqlCommand("UPDATE [Users] SET [UserName] = @OldUserName, [Comments] = @OldComments WHERE [UserID] = @OldUserID", MySqlConnection)UserAdapter.UpdateCommand.Parameters.Add("@UserID", SqlDbType.Int, 5, "UserID")UserAdapter.UpdateCommand.Parameters.Add("@OldUserName", SqlDbType.Char, 5, "UserName")UserAdapter.UpdateCommand.Parameters.Add("@OldComments", SqlDbType.Char, 5, "Comments")UserAdapter.Fill(UserDT)MySqlConnection.Close()TryMySqlConnection.Open()UserAdapter.Update(UserDT)Catch ex As ExceptionFinallyMySqlConnection.Close()End TryEnd SubEnd Class
The line of code for the button is:
<asp:button id="btnUpdate" text="Update" runat="server" CommandName="Update" OnClick="Btn_Update"></asp:button>
I know there is some simple logic error I have. The page isn't erroring, and there doesn't look like a problem but we aren't able to update the database. I know the button click event gets to the code because we plugged a msg box in there and it appeared, twice I might add, which i don't know about either. Can anyone help us make this darn thing update??? What logic are we missing?
Thanks!!!
We've been using CVS for our HTML, JAVA etc..Now we would like to use it for our SQL CODE to. We have a largedatabase with many stored procedures.I would like to have something using Ant like:Download the latest version of source code.If the SQL patch has been updated, run the patch to update theDatabase.I don't know how to deal with the SQL patch files. Do I update thesame file(over writing the anything from the previous patch, or justwrite new files for each version?)I am sure someone has done something like this.What are the best practices for doing this? Could someone pleaseoutline thier setup for SQL version control?
View 2 Replies View Relatedhi gurus,
I am working on creating a new project in asp.net and was having problem in locating the sqldatasource and gridview control objects in the data toolbox.
Can anybody help me in adding these controls to the toolbox?
OS=Windows XP
Server =Sql Server 2005
Visual studio 2003
Hi,
I noticed the other day the option to use source control in SQL Server management studio. My question is how do I add sln to existing databases in order to add them to source control??
Thanks.
Hi all,
I'm in need of a source control system that integrates with the Management Studio so that every time i want to modify a table, view, procedure etc I have to check it out from the object explorer and then check it back in again. I have used Visual Source Safe before but never with a database...is it fully integrated with SSMS? What can I do to make this work as smoothly as possible?
Is there any other IDE that handles this better than SSMS?
--
Lumbago
"Real programmers don't document, if it was hard to write it should be hard to understand"
Why can't another developer check out SSIS packages from source control in TFS. I have given the developer all the permissions out there. I was the one who had created an SSIS solution/project local on my machine and then added to source control in TFS under the teamproject. The developer can do everything except in the source control explorer, everything is grayed out. I know you can set up permissions in source control explorer, and I have done that. but still no luck. Can it be related to workspace. When I open the Souce control explorer, in the workspace, I see the name of my local machine. should it be different. or is something else an issue.
Please advice.
Thank you.
I was having one package which uses a source query in OLEDB Source Control and fetches the record and a couple of lookups and then an oledb command to insert/update the records in the table using as SP. I changed the source query(Infact the package) and removed in lookup and a different SP was called similar to the old one. But my problem is the package which was before taking only minutes to update 50,000 records is now taking more than 2 hrs. The problem is the number of records it is fetching from the source each time is very less.. its fetching hardly 500 records a time compared to nearly 2500 records before. Where am i going wrong? Any suggestion greatly appreciated.
View 5 Replies View RelatedHello,
I am using this sql data source control.
<asp:textbox runat="server" id="txtFromDate" ReadOnly="true"></></asp:textbox>
<asp:textbox runat="server" id="txtToDate" ReadOnly="true"></asp:textbox>
--------------------------------->
<asp:sqldatasource id="dsClickInfo" runat="server" connectionstring="<%$ ConnectionStrings:activeConnectionString %>"
selectcommand="SProc_GetTransaction" selectcommandtype="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter QueryStringField="Id" Name="MerchantID" Type="int32" />
<asp:ControlParameter ControlID="txtFromDate" Name="StartDate" PropertyName="Text"
Type="String" DefaultValue="0" />
<asp:ControlParameter ControlID="txtToDate" Name="EndDate" PropertyName="Text"
Type="String" DefaultValue="0" />
</SelectParameters>
</asp:sqldatasource>
I abouve code txtFromDate and txtToDate are marked as readonly so sqldatasource is not able to get value from these controls.
How is it possible?
Please help me..
Hi guys'n'girls...
I currently work for a company where we develop several large ASP.NET applications which are VERY data centric. But lately we have run into a problem on our developer DB...
On the project I am working on we currenctly have approx. 10 developers working concurrently on the database. That means that we often run into errors caused by two developers working on the same stored procedure, function or trigger so the developer who adds his changes last, overwrites the modifications done by the other developer. The obvious answer is source control for the db, but as far as I can tell this is only available for stored procedures and not for functions or triggers... And even the stored procedure solution isn't very safe because it only works if every developer is editing the procedures through VS.
So what do we do? There must be some solution to this problem... And I'm pretty convinced that we are not the first company to face this problem. Are we doing it the wrong way or do you know another solution?
Thanks in advance!
We have a large team working on applications to support our internal sales and our public dotcom site. In the process, as you can imagine, we generate a lot of stored procedures and sql scripts going to our dba's for our staging,qa and production environments- but we don't have a solid way to manage it yet. Some people use Source Safe? Does anyone have any successes in this area or recomendations?Thanks!s!Stephen Rylander
View 2 Replies View RelatedHi!
I have a strored proc which adds up fields separated by semicolon into a new one and I'd like to use it as a combo box's control source field as a Value list. But it's just insert the whole field into one line like value1;value2;value3 .
Is there any way to get these values selectable in the combo box?
Thanks in advance for any help.
Vill
I noticed from this link:
http://www.aspfaq.com/show.asp?id=2495
There are four well known products that are used by medium to large size shops to help aid in change management of SQL Environments.
- AbaPerls
- DBGhost
- MSSqlExpress
- SQL Source Control
Does anyone currently use any of the above? Could you briefly explain your likes an dislikes and if you have reviewed any of the other options above when you had to make a decision as to which product to use?
Hello SQL Server Community.
I'm looking for a way to keep my database in Subversion so I can maintain it in source control.
Seems like the best way to do this would be to dump the database to a text script file. This works fine for creating the database structure and managing those change, however, that database structure is useless without the actual data in the tables.
Is there a good way to generate the inserts for the actual data? Why isn't this an option in the script wizard.
Also, does anyone have a better idea of source control of SQL Server databases in Subversion?
Thanks,
Ryan.
http://www.dynamicajax.com
Hi,I am trying to put SQL Server Stored Procedures into Sourcesafe as perthe Microsoft Knowledge Base article 818368, but have run into aproblem.The web server is SQL Server 2000 running on Windows 2003 Server. Theclient dev environment is Visual Studio 2003 Enterprise DeveloperEdition.I have carried out the following steps successfully:-1. Installed Sourcesafe client tools on the Server (sourcesafe is onanother server)2. Run the MSSQLServer service under a domain account that has Readand Write access to the Sourcesafe database.3. Added the above user to Sourcesafe using the Administrator tool.4. Installed the VS6 Stored Procedure Version Control components onthe Server5. Enabled Version Control for Stored Procedures on the clientHowever when I right-click on the Stored Proc node in Server explorerI do not get any of the Sourcesafe menu options. They are not greyedout, they are simply not there!Any help would be appreciated.Alternatively if anyone has recommendations for other strategies orother tools to use for this purpose than Sourcesafe then this wouldalso be welcomeKarl
View 1 Replies View RelatedOur team has the following problem:
I create a SSIS project in VS and add it to Team Source Control. When the project and all it's files exist on a machine and I want to open the project from Source Control, everithing works fine, but when another developer, who doesn't have the files on his machine, wants to open the project from Source Control he is required to check out the project file.
I've investigated the problem and found out that each project has a database file (with .database extension) and project file contains a reference to it. Once the user opens from Team Source Control a project that isn't presented on a target machine, the VS creates a new database file on a local machine and insists to change the reference in the project file.
Does anyone have a workaround for the problem?
Thanks
Hi
We have encountered a problem using source control with reporting services. Im writing this post to find out whether we are doing something wrong, or reporting service just don't store everything in source control.
My problem is as follows.
My collegue creates a report with a dataset and this report contains several parameters. He tests this, deploys it, and checks it into the source control through Visual Studio.
The following day I get responsibility to alter something in this report. I checks out everything from source control, starts Visual Studio. But... A few important things are missing. The credentials for the dataset for once (this is a minor issue) since these might not should be stored in source control anyways. What is worse is that all the parameter settings are missing. What was entered was a query to a stored procedure where e.g 5 parameters in the report was mapped to parameters in the stored procedure. Now the query has been changed to text type, and the parameter mapping is missing.
This does make it impossible to cooperate on creating reports. If I now make a change in the parameter configuration, my collegue won't receive this when synchronizing source control, and the risk of deploying something incorrect is too high.
Can anyone help enlighten us. Are we doing something wrong? Is there some manual step that needs to be done to ensure that everything is stored in source control? Or is it just something we have to live with, not being able to trust source control when doing Reporting Services?
Best regards
/Anders
I have all the config files for my various packages in a folder call configs. It seems that I cannot add folders to the SSIS solution. I can add config files, but they get copied into the root folder, which breaks the directory structure that I have.
Am I missing something? Is there a recommended to manage config files, and other external files used by the SSIS package, in SourceSafe and in the SSIS solution? Thank you.
Hi I am trying to open a database connection to a Northwind database. I can open it with a datasource control and return data to a gridview, but can't programically. I get a sqlexception error. this is ust for learning.
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim S As New SqlConnection Dim builder As New SqlConnectionStringBuilder builder("Data Source") = ".SQLEXPRESS;AttachDbFilename=C:SQLNORTHWND.MDF" builder("Integrated Security") = True builder("Connect Timeout") = 30 builder("User Instance") = True S.ConnectionString = builder.ConnectionString Me.Label1.Text = S.ConnectionString S.Open() Me.Label2.Text = S.State.ToString S.Close() Me.Label3.Text = Me.SqlDataSource1.ConnectionString.ToString End Sub
The text in label2 and Label three are identical except there are "" around the datasource.
How come I can connect through the datasource control but not through code?
We are setting up a new Reporting Services 2005 enterprise reporting tier that will support multiple developers, applications, and end users. We will have mirrored environments including development, test, and production each with their own database cluster, and reporting server.
We have multiple report developers who share a single Visual Studio solution which is saved in SourceSafe and is setup to have separate report projects for each business unit in the orgainzation. Each report project is mapped to a specific deployment folder matching the business unit. Using the Visual Studio Configuration Manager, we can simply flip to the envirnoment we want to deploy to and the reports are published to the correct environment and folder structure.
My problem lies with the common data sources. We are using a single master Common Data Sources folder to hold all of the data sources. The trick is that each and every reporting folder seems to have to have it's own copy of the data source in visual studio. There does not seem to be an easy way to change the data sources for the reports when you publish to various environment, i.e. development, test, production etc.
Ideally, we would have a single project for the common data sources that all reporting projects and associated folders would map to, and we would have a way to associate the appropriate data source for each environment when we deploy.
I'm looling for best practices on how to setup data sources for development and deployment in an enterprise environment that uses Visual Studio to develop and publish reports. We have 3 environments, and 6 data sources per environment and about 20 reporting folder / project in Visual Studio. That's 360 changes that have to be manged when deploying reports. Is there a best practices way to do this?
There has got to be a better way? Can anyone give me some insite into how to set this up?
Thanks!
I have an ASP page which uses an SQL data source control, as shown below: <asp:SqlDataSource ID="mySQL" runat="server" ConnectionString="<%$ ConnectionStrings:mySQLConnectionString %>" SelectCommand="SELECT device FROM device_table WHERE (device_id IN (@devicelist))"> <SelectParameters> <asp:Parameter DefaultValue="" Name="devicelist" Type="String" /> </SelectParameters> </asp:SqlDataSource>The problem is getting the "IN" clause of the select statement to work via the ASP page with code behind in C#. If I test the query in the page designer when configuring the SQL control by inserting 'device-1','device-2','device-3' as the value for the "devicelist" parameter, everything works as expected. However, when that same value is written programmatically into the DefaultValue of the parameter, the resulting query contains no results (as if the string contents are invalid). If I alter my program to supply a single entry (with no commas) it seems to work as well. I suspect the comma (and possibly the single-quote) characters in my string when multiple entries are involved are causing the issue.Is there a proper technique for getting the requisite quote-delimited, comma-separated list into the SQL control command parameter correctly? Should I be using some sort of escape sequence for the single-quote and comma characters? Should I be using another "type" for the parameter; one that accepts an array of entries? I have not been able to find any examples or documentation that provides an answer.
View 1 Replies View RelatedI have a DB with the folloing fields... ArticleID, ArticleTitle, PublishDate(DateTime Field), EndPublishDate(DateTime Field).... What I want to do is show in a list view only the articles where the date is on or after the PublishDate and before or on the EndPubishDate.
I thought I could simply do something like this
SELECT ArticleTitle, PublishDate, PublishEndDate, PublishedFROM UserArticlesWHERE (Published = @Published) AND (PublishDate >= @PublishDate) AND (PublishEndDate <= @PublishEndDate)
Well I can't... can someone explain how I can do this please... I understand the the PublishDate and EndPublsihDate need a variable... The info is in the DB I just don't know how to do what I need to.
Thanks,
Hi, I am a newbie in using ASP.NET 2.0 and ADO.NET. I wrote a hangman game and want to record statistics at the end of each game. I will create and update records in the database for each authenticated user as well as a record for the Anonymous, unauthenticated user. After a win or loss has occurred, I want to programmatically use the SQLDataSource control to increment the statistics counters for the appropriate record in the database (note I don't want to show anything or get user input for this function).
I need a VB.NET codebehind example that will show me how I should set up the parameters and update the appropriate record in the database. Below is my code. What happens now is that the program chugs along happily (no errors), but the database record does not actually get updated. I have done many searches on this forum and on the general Internet for programmatic examples of an update sequence of code. If there is a tutorial for this online or a book, I'm happy to check it out.
Any help will be greatly appreciated.
Lambanlaa
CODE - Hangman.aspx.vb
1 Protected Sub UpdateStats()2 Dim playeridString As String3 Dim gamesplayedInteger, gameswonInteger, _4 easygamesplayedInteger, easygameswonInteger, _5 mediumgamesplayedInteger, mediumgameswonInteger, _6 hardgamesplayedInteger, hardgameswonInteger As Int327 8 ' determine whether player is named or anonymous9 If User.Identity.IsAuthenticated Then10 Profile.Item("hangmanplayeridString") = User.Identity.Name11 Else12 Profile.Item("hangmanplayeridString") = "Anonymous"13 End If14 15 playeridString = Profile.Item("hangmanplayeridString")16 17 ' look up record in stats database18 Dim hangmanstatsDataView As System.Data.DataView = CType(statsSqlDataSource.Select(DataSourceSelectArguments.Empty), System.Data.DataView)19 20 gamesplayedInteger = 021 gameswonInteger = 022 easygamesplayedInteger = 023 easygameswonInteger = 024 mediumgamesplayedInteger = 025 mediumgameswonInteger = 026 hardgamesplayedInteger = 027 hardgameswonInteger = 028 29 If hangmanstatsDataView.Table.Rows.Count = 0 Then30 31 ' then create record with 0 values32 statsSqlDataSource.InsertParameters.Clear() ' don't really know what Clear does33 statsSqlDataSource.InsertParameters("playerid").DefaultValue = playeridString34 statsSqlDataSource.InsertParameters("GamesPlayed").DefaultValue = gamesplayedInteger35 statsSqlDataSource.InsertParameters("GamesWon").DefaultValue = gameswonInteger36 statsSqlDataSource.InsertParameters("EasyGamesPlayed").DefaultValue = easygamesplayedInteger37 statsSqlDataSource.InsertParameters("EasyGamesWon").DefaultValue = easygameswonInteger38 statsSqlDataSource.InsertParameters("MediumGamesPlayed").DefaultValue = mediumgamesplayedInteger39 statsSqlDataSource.InsertParameters("MediumGamesWon").DefaultValue = mediumgameswonInteger40 statsSqlDataSource.InsertParameters("HardGamesPlayed").DefaultValue = hardgamesplayedInteger41 statsSqlDataSource.InsertParameters("HardGamesWon").DefaultValue = hardgameswonInteger42 43 statsSqlDataSource.Insert()44 End If45 46 ' reread the record to get current values47 hangmanstatsDataView = CType(statsSqlDataSource.Select(DataSourceSelectArguments.Empty), System.Data.DataView)48 Dim hangmanstatsDataRow As System.Data.DataRow = hangmanstatsDataView.Table.Rows.Item(0)49 50 ' set temp variables to database values51 gamesplayedInteger = hangmanstatsDataRow("GamesPlayed")52 gameswonInteger = hangmanstatsDataRow("GamesWon")53 easygamesplayedInteger = hangmanstatsDataRow("EasyGamesPlayed")54 easygameswonInteger = hangmanstatsDataRow("EasyGamesWon")55 mediumgamesplayedInteger = hangmanstatsDataRow("MediumGamesPlayed")56 mediumgameswonInteger = hangmanstatsDataRow("MediumGamesWon")57 hardgamesplayedInteger = hangmanstatsDataRow("HardGamesPlayed")58 hardgameswonInteger = hangmanstatsDataRow("HardGamesWon")59 60 ' update stats record61 'statsSqlDataSource.UpdateParameters.Clear()62 'statsSqlDataSource.UpdateParameters("playerid").DefaultValue = playeridString63 64 If Profile.Item("hangmanwinorloseString") = "win" Then65 66 statsSqlDataSource.UpdateParameters("GamesPlayed").DefaultValue = gamesplayedInteger + 167 statsSqlDataSource.UpdateParameters("GamesWon").DefaultValue = gameswonInteger + 168 Select Case Profile.Item("hangmandifficultyInteger")69 Case 170 statsSqlDataSource.UpdateParameters("EasyGamesPlayed").DefaultValue = easygamesplayedInteger + 171 statsSqlDataSource.UpdateParameters("EasyGamesWon").DefaultValue = easygameswonInteger + 172 Case 273 statsSqlDataSource.UpdateParameters("MediumGamesPlayed").DefaultValue = mediumgamesplayedInteger + 174 statsSqlDataSource.UpdateParameters("MediumGamesWon").DefaultValue = mediumgameswonInteger + 175 Case 376 statsSqlDataSource.UpdateParameters("HardGamesPlayed").DefaultValue = hardgamesplayedInteger + 177 statsSqlDataSource.UpdateParameters("HardGamesWon").DefaultValue = hardgameswonInteger + 178 End Select79 80 81 ElseIf Profile.Item("hangmanwinorloseString") = "lose" Then82 83 statsSqlDataSource.UpdateParameters("GamesPlayed").DefaultValue = gamesplayedInteger + 184 Select Case Profile.Item("hangmandifficultyInteger")85 Case 186 statsSqlDataSource.UpdateParameters("EasyGamesPlayed").DefaultValue = easygamesplayedInteger + 187 Case 288 statsSqlDataSource.UpdateParameters("MediumGamesPlayed").DefaultValue = mediumgamesplayedInteger + 189 Case 390 statsSqlDataSource.UpdateParameters("HardGamesPlayed").DefaultValue = hardgamesplayedInteger + 191 End Select92 End If93 94 statsSqlDataSource.Update()95 96 End Sub97
CODE - Hangman.aspx 1 <asp:SqlDataSource ID="statsSqlDataSource" runat="server" ConflictDetection="overwritechanges"
2 ConnectionString="<%$ ConnectionStrings:lambanConnectionString %>" DeleteCommand="DELETE FROM [Hangman_Stats] WHERE [PlayerID] = @original_PlayerID AND [GamesPlayed] = @original_GamesPlayed AND [GamesWon] = @original_GamesWon AND [EasyGamesPlayed] = @original_EasyGamesPlayed AND [EasyGamesWon] = @original_EasyGamesWon AND [MediumGamesPlayed] = @original_MediumGamesPlayed AND [MediumGamesWon] = @original_MediumGamesWon AND [HardGamesPlayed] = @original_HardGamesPlayed AND [HardGamesWon] = @original_HardGamesWon"
3 InsertCommand="INSERT INTO [Hangman_Stats] ([PlayerID], [GamesPlayed], [GamesWon], [EasyGamesPlayed], [EasyGamesWon], [MediumGamesPlayed], [MediumGamesWon], [HardGamesPlayed], [HardGamesWon]) VALUES (@PlayerID, @GamesPlayed, @GamesWon, @EasyGamesPlayed, @EasyGamesWon, @MediumGamesPlayed, @MediumGamesWon, @HardGamesPlayed, @HardGamesWon)"
4 OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT PlayerID, GamesPlayed, GamesWon, EasyGamesPlayed, EasyGamesWon, MediumGamesPlayed, MediumGamesWon, HardGamesPlayed, HardGamesWon FROM Hangman_Stats WHERE (PlayerID = @playerid)"
5 UpdateCommand="UPDATE [Hangman_Stats] SET [GamesPlayed] = @GamesPlayed, [GamesWon] = @GamesWon, [EasyGamesPlayed] = @EasyGamesPlayed, [EasyGamesWon] = @EasyGamesWon, [MediumGamesPlayed] = @MediumGamesPlayed, [MediumGamesWon] = @MediumGamesWon, [HardGamesPlayed] = @HardGamesPlayed, [HardGamesWon] = @HardGamesWon WHERE [PlayerID] = @original_PlayerID AND [GamesPlayed] = @original_GamesPlayed AND [GamesWon] = @original_GamesWon AND [EasyGamesPlayed] = @original_EasyGamesPlayed AND [EasyGamesWon] = @original_EasyGamesWon AND [MediumGamesPlayed] = @original_MediumGamesPlayed AND [MediumGamesWon] = @original_MediumGamesWon AND [HardGamesPlayed] = @original_HardGamesPlayed AND [HardGamesWon] = @original_HardGamesWon">
6 <DeleteParameters>
7 <asp:Parameter Name="original_PlayerID" Type="String" />
8 <asp:Parameter Name="original_GamesPlayed" Type="Int32" />
9 <asp:Parameter Name="original_GamesWon" Type="Int32" />
10 <asp:Parameter Name="original_EasyGamesPlayed" Type="Int32" />
11 <asp:Parameter Name="original_EasyGamesWon" Type="Int32" />
12 <asp:Parameter Name="original_MediumGamesPlayed" Type="Int32" />
13 <asp:Parameter Name="original_MediumGamesWon" Type="Int32" />
14 <asp:Parameter Name="original_HardGamesPlayed" Type="Int32" />
15 <asp:Parameter Name="original_HardGamesWon" Type="Int32" />
16 </DeleteParameters>
17 <UpdateParameters>
18 <asp:Parameter Name="GamesPlayed" Type="Int32" />
19 <asp:Parameter Name="GamesWon" Type="Int32" />
20 <asp:Parameter Name="EasyGamesPlayed" Type="Int32" />
21 <asp:Parameter Name="EasyGamesWon" Type="Int32" />
22 <asp:Parameter Name="MediumGamesPlayed" Type="Int32" />
23 <asp:Parameter Name="MediumGamesWon" Type="Int32" />
24 <asp:Parameter Name="HardGamesPlayed" Type="Int32" />
25 <asp:Parameter Name="HardGamesWon" Type="Int32" />
26 <asp:Parameter Name="original_PlayerID" Type="String" />
27 <asp:Parameter Name="original_GamesPlayed" Type="Int32" />
28 <asp:Parameter Name="original_GamesWon" Type="Int32" />
29 <asp:Parameter Name="original_EasyGamesPlayed" Type="Int32" />
30 <asp:Parameter Name="original_EasyGamesWon" Type="Int32" />
31 <asp:Parameter Name="original_MediumGamesPlayed" Type="Int32" />
32 <asp:Parameter Name="original_MediumGamesWon" Type="Int32" />
33 <asp:Parameter Name="original_HardGamesPlayed" Type="Int32" />
34 <asp:Parameter Name="original_HardGamesWon" Type="Int32" />
35 </UpdateParameters>
36 <InsertParameters>
37 <asp:Parameter Name="PlayerID" Type="String" />
38 <asp:Parameter Name="GamesPlayed" Type="Int32" />
39 <asp:Parameter Name="GamesWon" Type="Int32" />
40 <asp:Parameter Name="EasyGamesPlayed" Type="Int32" />
41 <asp:Parameter Name="EasyGamesWon" Type="Int32" />
42 <asp:Parameter Name="MediumGamesPlayed" Type="Int32" />
43 <asp:Parameter Name="MediumGamesWon" Type="Int32" />
44 <asp:Parameter Name="HardGamesPlayed" Type="Int32" />
45 <asp:Parameter Name="HardGamesWon" Type="Int32" />
46 </InsertParameters>
47 <SelectParameters>
48 <asp:ProfileParameter Name="playerid" PropertyName="hangmanplayeridString" />
49 </SelectParameters>
50 </asp:SqlDataSource>
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
I have an SQL data source on my page and I select "Table". On the next screen I pick the fields I want to show. Then I click the "Advanced" button because I want to allow Inserts, updates and deletes. But its all greyed out abd I can't check this option. The UID in the connection string I am connecting under has the correct permissions in SQL server to do inserts, update and deletes too. Anyone know why it would be greyed out? The connectionstring property in the aspx code is dynamic but this shouldn't be the reason because I have used this before with success
View 2 Replies View RelatedHow to integrate current artifacts with TFS ?
For example : We have multiple applications X, Y, Z  each has  its own SSIS solution , SQL Script, MSTR report and documentation.
We move code from Dev to Test and then to PROD
How to structure the folders which will be easy to manage and easy to release ?
A Source code required for create SQL Server Database,Tables,Procedures programatically
View 1 Replies View RelatedHi,I'm developing an application to crypt SQL databases and i need toread SP and Views source code from VB6, if you know how to do thisplease answer me.Greetings.
View 1 Replies View Related