Special Character Problems With SSIS Data Reader Using ODBC Driver For DB2
Sep 5, 2007
Hi,
in SSIS I read data from a DB2 database on AS400 using the Client Access ODBC Driver for DB2 from IBM and write it to a SQL Server database. Since it does not work using the odbc driver as data source directly, I use a data reader component with .net providersodbc.
Some special characters were not translated correctly when read from DB2. They show up as ? in the SQL Server target table.
I tried to change the client locale in the ODBC connection properties but it did not help me. I tried changing all other settings in odbc but it still does not work.
In dts I could source all the data without this problems and good speed using the same nodbc driver.
The OLEDB Providers delivered with SSIS do not work in SSIS or I am too stupid to configure them correctly. They are even too slow as I explained above.
I cannot use the MS OLEDB Provider for DB2, because it works only in Enterprize Edition and we only have the Standard Edition.
Thus, only using Client Access ODBC Driver for DB2 with net providersodbc (as bridge) is performant enough and works on Itanium. But how to work around the problem with the special characters?
Best regards,
Stefoon
View 3 Replies
ADVERTISEMENT
Jun 1, 2015
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
View 9 Replies
View Related
Oct 19, 2006
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
Thanks!
Dan <><
View 17 Replies
View Related
Feb 4, 2008
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below.
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
View 1 Replies
View Related
Sep 26, 2007
Hi,
I would like to know how to import in the custom delimited text file by using SSIS.
For example, instead by using tab or comma delimited, I use this character : '¶'
The reason is the delimited format that SSIS provided is too common such as colon, semi colon, tab, comma and pipeline.
I have the data that the user also key in the pipeline there. So I am thinking to separate the field by using this special character, but cannot see if there is anyway to import in by using SSIS.
Please help to share the solution on this :
A¶B¶C
1¶2¶3
thanks
best regards,
Tanipar
View 8 Replies
View Related
Sep 18, 2015
I want to import date from excel file from the row if this row has a character like 'TableName', and I don't know the rownumber and end column number ,so I can't use openrowset 'select * from Sheet$ A11:N'.  And I am thing if I can get the rownumber of the row contain string 'TableName' and the max column ,that May be easy to extract data.
View 2 Replies
View Related
Oct 28, 2004
Hi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
View 1 Replies
View Related
Jul 9, 2015
There is a ">" character (right-angle bracket) inside my SQL Server password. When I supplied this password to the bcp utility, the ">" character was treated as an output redirection symbol. So the password was truncated at ">" and the bcp output got sent to a file with a name consisting of the rest of the password after ">". I'm using SQL Server 2012. I cannot use Windows authentication due to company policy. Is there a way to resolve this without changing the password?
View 7 Replies
View Related
May 30, 2007
Hello All,
How do I get columns to output when I have a data reader source? My connection is an ODBC and does complex sql. I am connection to a Netezza database and I would like to execute a very complex query, but in essence does
Create newtable as
(select day, sessionId)
from source
// lots of other joins and unions
select day, sessionId from newtable
drop newtable
I have an ODBC connection and I have a Datareader source, I cannot connect this source to my SQL Server destination because no output columns are available. What am I missing here?
Are there any good examples of this, taking data from a ODBC source into SQL server?
Thanks in advance.
View 5 Replies
View Related
Mar 18, 2007
A data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
EXEC sp_addlinkedserver
@server = 'server_name',
@srvproduct = '',
@provider = 'MSDASQL',
@datasrc = 'odbc_dsn_name'
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
Any assistance would be appreciated.
Thanks,
View 3 Replies
View Related
Jul 20, 2005
hi all,I am trying to create a dts package to transfer data from tables in mysql server 2000 database to a db2 UDB v8.1.4 database. When I use ibmdb2 oledb driver for the destination this works fine except that rowsare committed on a row by row basis thus performance is slow. I wantto use the odbc driver but when I define it as the destination, i geterrors saying that the maximum number of rows failed has exceeded theminimum.Does anybody know what to do in order to get the transfer workingusing ibm db2 odbc as the datasource?ThanksLyn
View 2 Replies
View Related
May 12, 2008
Hi all,
We are using a package to extract data from a source build on some image using SOLID ODBC 5.2 driver.
When we tried to extract data through MS SSIS(SQL Server Integration Services) package using SOLID 5.2 ODBC driver connection, it throws an error as mentioned below:
ERROR DESCRIPTION:
Error: 0xC02090F5 at Data Flow Task, DataReader Source [1]: The component "DataReader Source" (1) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Also, we tried the same in a Excel sheet using the SOLID 5.2 ODBC driver it is working fine.
Does the SOLID ODBC driver support .Net framework or do we need to install any other components??
Thanks and Regards,
Nirmal
View 2 Replies
View Related
Feb 18, 2004
Hi !
I'm trying to load data in sql server table with Bulk Copy Program (BCP).
I have the following errors.
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unexpected EOF encountered in BCP data-file
In my File to load i have this :
Hello1¤Hello2¤17/02/2004
TOTO1¤TOTO2¤17/02/2004
TITI1¤TITI2¤17/02/2004
My definition table is :
create table tab1
(
TABLE varchar(20) null ,
PK varchar(50) null ,
DATE datetime null
)
go
I launch bcp with this command :
bcp.exe "BASETEST.dbo.tab1" in "c: ab1.out" -c -CRAW -t¤ -m100 -Smyserver -U -P -o"c: ab1.log"
The file "table1.out" is making with a C program.
Do you have an idea ?
Thanks.
View 1 Replies
View Related
Oct 28, 2015
i am on a 2008r2 machine and need to add a microsoft excel odbc driver but its missing.
View 2 Replies
View Related
Feb 18, 2008
Hi I'm currently trying to create a few DTS packages that Import some very wide tables, Im using an ODBC data source into a Data Reader. I want to re-direct any errors into an error destination. The problem I've got is that I can go in and set each column to redirect but was hoping I could select or specify that this needs to happen for all the rows? Does anyone know if this is possible and if so how I go about it?
Many thanks....
View 1 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
May 9, 2008
Hi,
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
Error message:
dtswiz 1390-e20 EXIT SQLTablesW with return code -1 (SQL_ERROR)
HSTMT 003C3108
WCHAR * 0x00D27EB8 [ -3] "? 0"
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00164804 [ -3] "TABLE 0"
SWORD -3
DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)
Best Regards,
Murthy
View 1 Replies
View Related
Aug 15, 2007
In several weeks of effort and research I cannot locate any method to get this to work and need some help. We've loaded the most recent version of the Microsoft OLE DB (Feb 2007) and have located several discussion threads on these and other forums that all point to the same conclusion... you cannot use this to talk to a UDB/DB2 instance on Sun Solaris unless you are pulling a full table. Any custom SQL will not work. So, I'm trying to setup a custom query which in most cases is to determine a date to use in the filter (where clause) and the rest of the query is static. The DataReader source does not support parameters and also appears to not support SQL command from variable. Any thoughts on how to get this to work without having to read the full table and pass the data to subsequent filters within the package???
Thanks
View 14 Replies
View Related
May 13, 2007
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
View 14 Replies
View Related
Dec 8, 2005
Hi,
i have the following problem:
I like to extract all special characters in one table with many fields.
How can I handle this without using 'replace' for each field and many characters ?
Thx. for ur suggestions.
dajm
View 2 Replies
View Related
Jul 20, 2005
How can I insert by asp a string containing 'That's the stringAsp code:SQL = "insert into tablename (columnA) values ('" & variable & "')"The problem is when variable contains a ' (single quote), it stops thestring definition and get an error.Can I do something?Thanks--Posted via Mailgate.ORG Server - http://www.Mailgate.ORG
View 2 Replies
View Related
Feb 26, 2008
Hi SQL Server Team,
In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.
Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by " ".
rc = SQLConfigDataSource(NULL, ODBC_ADD_DSN, type_of_driver, parameters);
after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.
C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm
Creating a datasource with the file name i.e Benefits Logic System Level V01 every time.
rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);
Also following error message was encountered during execution of SQLConnect command.
/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/
Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner.
rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr),
&outstrlen,SQL_DRIVER_NOPROMPT);
Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.
Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.
An early reply will be appreciated.
Cheers & Regards,
Saresh
View 1 Replies
View Related
May 16, 2006
We are writing SSIS packages to pull data from MSO€™s through a stored procedure and drop the output into the pipeline to store it on our local database.
Here is an example of a very simple data flow task that executes the following query in step 1
EXEC GetCustomerData @SELECT = 'OrganizationID', @FROM = 'Organization',@WHERE = 'StateOrProvinceCode = ''WA'''
This command is stored in a variable called SQLOrgCommand.
When I open the task and click on Columns I do not see any columns returned
This allows me to conclude that the metadata needed from the GetCustomerData is not understood by SSIS because the SP uses dynamic sql.
While profiling we realized that it executed the following SQL:
SET FMTONLY ON
to get the metadata. However when we ran the sp with FMTONLY ON we recieved the following errors
Msg 536, Level 16, State 5, Procedure sp_GetData, Line 100
Invalid length parameter passed to the SUBSTRING function.
Msg 536, Level 16, State 2, Procedure sp_GetData, Line 101
Invalid length parameter passed to the RIGHT function.
Msg 536, Level 16, State 5, Procedure sp_GetData, Line 116
Invalid length parameter passed to the SUBSTRING function.
Msg 536, Level 16, State 2, Procedure sp_GetData, Line 117
Invalid length parameter passed to the RIGHT function.
Msg 536, Level 16, State 5, Procedure sp_GetData, Line 187
Invalid length parameter passed to the SUBSTRING function.
The same stored procedure executed without FMTONLY OFF generates the proper output.
Is this a known bug in SQL Server? If so is there a patch that we can install.
View 1 Replies
View Related
Oct 6, 2004
I had to update pricelist at local-db on the basis of prices in another SQL by matching the description. When i JOIN the tables, no record gets displayed, but the descrptions at both tables were exactly the same i believed. Took a lot of time in identifying the discrepancy; the data was like this:
CREATE TABLE #ABC (price money, DESCRIPTION VARCHAR(200))
GO
INSERT #ABC SELECT 19999,'SQL2000
'
GO
SELECT * FROM #ABC WHERE DESCRIPTION ='SQL2000'
--(0 row(s) affected)
SELECT * FROM #ABC WHERE LTRIM(RTRIM(DESCRIPTION))='SQL2000'
--(0 row(s) affected)
select * from #ABC WHERE REPLACE(DESCRIPTION,'
','')='SQL2000'
--(1 row(s) affected)
GO
DROP TABLE #ABC
:rolleyes: I believe, ENTER has some value within a field.
View 14 Replies
View Related
Feb 3, 2006
I'm trying to remove the special character ÿ from a varchar
select replace(my_col,'ÿ',' ')
this works, but the problem is that it also seems to replace the 'normal' y
(Database is case sensitive)
Why is that?
View 3 Replies
View Related
Mar 3, 2006
shailendra writes "Hi,everbody
lets come to my problem.I have one variable of type "ntext" which contain character "". i want to remove it or replace it with a blank character.
very urgent.....
waiting for the reply
shail"
View 1 Replies
View Related
Nov 7, 2007
Hi,
I am using MSSQL 2005 with the compatability mode set to 2000.Now, one of my String columns in a table has data in the following format:
ABC[123][XYZ]
Now issuing the following SELECT query in the table does not work :
Select * from TAB1 where col1 like 'ABC[%'
ie, no row gets selected.However, the following query works:
Select * from TAB1 where col1 like 'ABC%'
Looks like '[' is a special character :( Now, how do i work around this so that i can select strings starting with "ABC[".Please help.
Thanks.
View 5 Replies
View Related
Mar 21, 2006
CHALASANI writes "I have a name in my table which is "ra_ja" I want to find the name with the help of the'_' character.
Can you please help with the querry
Sorry with my english
Thank you"
View 4 Replies
View Related
Oct 12, 2007
Hi,SQL env: sql server 2000Target column of insertion: varchar(15)Case, a var is made up of a character of the following characters(random selection):A,B,C,D,E,$,!,%,^,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U, V,W,X,Y,Z,&,*,(,)and a few numbers (random selection), and thenvar = ran1&ran2I'm experiencing intermit sql errorIs it because I did not include the string with quotes likevar = "ran1 & ran2"or the first random seletion may include special character and thatmay cause insertion error randomly?Probably the former is more likely. And I've added quotes for thevar (programming language shouldn't really matter, int type usuallywithout quotes while strings need quotes).What's your thought?Thanks.
View 7 Replies
View Related
Oct 8, 2007
Hello all
I am trying to update a colunm with the value (Dynamically).
'UPDATE ' + @TABLE + ' SET '+ @FIELD + ' = '''+ @VALUE +'''
well It works fine until @Value contains quotation for instance @value = O'hare Airport
results in termination of the statement because of single quote after O in O'Hare. Is there any way I can see it works
Also suppose if its updating a field which can be say 10 charcters long and when @value has say 15 characters, it terminates. Is there anyway i can avoid this.
View 4 Replies
View Related
Jul 21, 2015
I would like to know how can i only get the characters before the special character?
For example if the mail id is The.Champ123@gmail.com i need to extract The.Champ123 and if the mail id is TheChamp@gmail.com I need to get TheChamp.So basically i would like to get the characters from the string before '@' character.
View 14 Replies
View Related
Dec 6, 2007
I am creating a view to pull data for a UPS integration I am doing. I currently have this view where I pull my data from. All is well accept for my PATINDEX,
Currently I have this PATINDEX So when a user puts this into delivery instructions "#999999" UPS_FINAL returns 999999 which is good for me to use. But The PATINDEX will also grab all kinds of neat stuff out of the delivery instructions field when I really only want whatever is after the # sign in the field.
I am new to sql and dont quite understand how this search is working but I think I am in need of a better way to search the field
Code:
WHEN SUBSTRING(P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions, PATINDEX('%[^a-z ]%', P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions) + 1, 6) IS NULL
THEN dbo.Address_Table.ups_code
ELSE SUBSTRING(P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions,
PATINDEX('%[^a-z ]%', P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions) + 1, 6) END AS UPS_FINAL
-------------------------------------------------------------------------------------
What I am looking to accomplish is a SUBSTRING that will search delivery_instructions
Code:
SELECT
TOP (100) PERCENT P21PLAY.dbo.p21_view_oe_pick_ticket.pick_ticket_no,
P21PLAY.dbo.p21_view_oe_hdr.order_no, P21PLAY.dbo.p21_view_oe_hdr.customer_id,
P21PLAY.dbo.p21_view_oe_hdr.ship2_name, P21PLAY.dbo.p21_view_oe_hdr.ship2_add1,
P21PLAY.dbo.p21_view_oe_hdr.ship2_add2,
P21PLAY.dbo.p21_view_oe_hdr.ship2_city,
P21PLAY.dbo.p21_view_oe_hdr.ship2_state,
P21PLAY.dbo.p21_view_oe_hdr.ship2_zip,
P21PLAY.dbo.p21_view_oe_hdr.po_no,
P21PLAY.dbo.p21_view_oe_pick_ticket.carrier_id AS Carrier,
P21PLAY.dbo.p21_view_oe_pick_ticket.carrier_id AS Supplier,
P21PLAY.dbo.p21_view_oe_hdr.cod_flag,
P21PLAY.dbo.p21_view_oe_hdr.terms,
P21PLAY.dbo.p21_view_oe_hdr.ship2_country,
P21PLAY.dbo.p21_view_oe_hdr.ship_to_phone,
P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions,
dbo.Address_Table.ups_code,
-----------Looks for special character and returns next 6 spaces as UPS_Shipper----------
SUBSTRING(P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions, PATINDEX('%[^a-z ]%',
P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions) + 1, 6)
AS UPS_Shipper,
------------------Checks view for email address or assigns alternate------------------
(CASE WHEN charindex('@', p21_view_contacts.email_address) > 0 THEN p21_view_contacts.email_address ELSE
'email@domain.com' END) AS alternate_address,
'Y' AS QVN, 'email@domain.com' AS failureaddress,
P21PLAY.dbo.p21_view_contacts.email_address,
------------When carrier_id is not one of these # then Null; else ------------------------------
CASE WHEN P21PLAY.dbo.p21_view_oe_pick_ticket.carrier_id NOT IN (105188, 105191, 105194, 105197, 105200,
105203, 105206, 105209, 105212) THEN NULL
----------------- Looks for special Character in delivery_instructions; if NULL then ups_code;
ELSE return value from delivery_instructions as UPS_Final--------------------
WHEN SUBSTRING(P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions,
PATINDEX('%[^a-z ]%', P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions) + 1, 6) IS NULL
THEN dbo.Address_Table.ups_code
ELSE SUBSTRING(P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions,
PATINDEX('%[^a-z ]%', P21PLAY.dbo.p21_view_oe_hdr.delivery_instructions) + 1, 6) END AS UPS_FINAL
FROM dbo.Address_Table INNER JOIN
P21PLAY.dbo.p21_view_oe_pick_ticket INNER JOIN
P21PLAY.dbo.p21_view_oe_hdr ON P21PLAY.dbo.p21_view_oe_pick_ticket.order_no =
P21PLAY.dbo.p21_view_oe_hdr.order_no ON
dbo.Address_Table.id = P21PLAY.dbo.p21_view_oe_hdr.customer_id LEFT OUTER JOIN
P21PLAY.dbo.p21_view_contacts ON P21PLAY.dbo.p21_view_oe_hdr.contact_id = P21PLAY.dbo.p21_view_contacts.id
WHERE
(P21PLAY.dbo.p21_view_oe_hdr.completed <> 'Y')
AND (P21PLAY.dbo.p21_view_oe_hdr.delete_flag <> 'Y')
AND (P21PLAY.dbo.p21_view_oe_hdr.will_call <> 'Y')
ORDER BY P21PLAY.dbo.p21_view_oe_pick_ticket.pick_ticket_no
Hope this makes since
View 4 Replies
View Related
Mar 12, 2014
I have a web page where the user can select the language (FR, EN, BG, ...) in a drop down list.
Next to the drop down list there is a text box where user can type the some text (translation).
User can add several description
On my web page, i have a button this button collect all information create an xml file and save all in database (sql server 2008)
that's work fine for some language => FR, EN and so on
But for bulgarian (bulgare) and greece there are some problem...
Some characters when i display it in sql look like => ???s??. ? d??ta?? a?t?
The value encoded by the user is => Ένωσης. Η διάταξη αυτή
but the result after t sql xpath is => ???s??. ? d??ta?? a?t?
Here is it my sql code where you can find my temporary table and my xml file and my xpath query
declare @tblTranslation table (idDocID int, languageID varchar(10), value varchar(500))
declare @Translations XML
set @Translations = '<?xml version="1.0" ?><Items><Item><eleKey>EN</eleKey><eleValue>This is a test</eleValue></Item><Item><eleKey>FR</eleKey><eleValue>test</eleValue></Item><Item><eleKey>BG</eleKey><eleValue>Ένωσης. Η διάταξη αυτή</eleValue></Item><Item><eleKey>HR</eleKey><eleValue></eleValue></Item><Item><eleKey>RO</eleKey><eleValue></eleValue></Item></Items>'
-- 2) fill the temporary table with information from the xml file
INSERT INTO @tblTranslation(idDocID, languageID, value)
SELECT
1
, Convert(nvarchar(max), i.query('eleKey/text()')) as colKey
, Convert(nvarchar(max), i.query('eleValue/text()')) as colValue
--
FROM @translations.nodes('/Items/Item') as x(i)
SELECT * FROM @tblTranslation
View 3 Replies
View Related
