Specified SQL Server Not Found. [SQLSTATE 42000]
Jan 27, 2007
Hi,
I have a Scheduled Job on my PC that runs against a Linked Server. I
have scheduled the Job to run when SQL Server Agent starts and I have
configured my SQL Server and SQL Server Agent to start when the OS
starts. The connection to the Linked Server is via my Broadband
internet connection.
I have some suspicions as to the cause and hence a possible solution
but I want to run my ideas past anyone else who may have experienced
the same.
1. Should I have my DSL modem turned on before I start the PC so that
the Network connection is available when the OS starts?
2. Are the Network connections only made available after you have
logged in and hence not established quickly enough before SQL Server
and SQL Server Agent are started?
Yesterday, when I rebooted the PC with the modem still on the
Scheduled Job ran without failure but this morning again it failed. My
usual routine is to turn on the modem just before I login.
If No. 2 is the case then maybe I just need to set the "Retry
attempts" parameter.
Thanks,
Michael Holberton
Hospedaje Los Jardines & Sacred Valley Mountain Bike Tours
Cusco Database Development and Cycling Services
http://www.machawasi.com/
http://machawasi.blogspot.com/
http://databaseservices.blogspot.com
http://serviciosdeciclismodelperu.googlepages.com
View 5 Replies
ADVERTISEMENT
Jun 19, 2001
I am having a problem with a Job Step that is failing. The actual Step runs
a Stored Procedure, but the Job keeps failing and returning the following
error
"sqlmaint.exe failed. [SQLSTATE 42000](Error 22029). The step failed."
Does anyone know what this means ?
Thanks.
View 1 Replies
View Related
Sep 14, 2004
during maintenance plan i get following error :
Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 5070: [Microsoft][ODBC SQL Server Driver][SQL Server]Database state cannot be changed while other users are using the database 'AJAX'
[Microsoft][ODBC SQL Server Driver][SQL Server]ALTER DATABASE statement failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]sp_dboption command failed.
[8] Database AJAX: Check Data and Index Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 7919: [Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed. Database needs to be in single user mode.
View 2 Replies
View Related
Jun 16, 2006
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
hi
I have a script which worked fine in SQL SERVER 2000. We have now upgraded to SQL SERVER 2005 (SP1). When I run the script from Query Analyser it works fine. But when I schedule the same script to run as a job, it fails and i get the following error:
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
Now, there is no problem with the syntax.
What could be the problem?? I have been searching for a logical answer on the Internet and although other people seem to have encontered a similar problem, I have yet to find an answer.
Million thanks if u can help.
Thanks
John
View 12 Replies
View Related
Jan 8, 2008
Problem Restoring Backup database in MSSQL 2000.I made a backup of one of my databases from one server and now I'm trying to restore to the production server (Clustering) using Enterprise Manager. I remote the server - launched Enterprise Manager and I select the restore from disk and I give the full path of a local drive in the server where the backup is located - when I clicked "ok" it first tells me: "Unable to verify the existence of the backup file location. Do you want to use the backup file location anyway?" If I answer "Yes" and "OK" it presents a error msg: "Cannpt open backup device 'c:.......bak. Restore database terminating - Microsoft SQL-DMO(ODBC SQLSTATE 42000). I have moved this backup around and I still get the same msg. Can anybody help - need assistance ASAP - thank you
View 4 Replies
View Related
Aug 7, 2007
Hello,
I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.
Here is the error message:
==
The job failed. Unable to determine if the owner (ADSme) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADSme', error code 0x5. [SQLSTATE 42000] (Error 15404)).
==
also this message in log:
==
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADSme, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
==
I already tested the suggested:
execute as login='adsme' and I get the same error on both (my local installations and production)
appreciate your help
View 23 Replies
View Related
Jun 11, 2007
Hi all,
I am getting error message 'An internal consistency error occured sqlstate:42000" when i am trying to restore the database.
Regards,
Shashi.
View 3 Replies
View Related
May 5, 2008
Hi Guys:
Our company wanted to try out SQL Server 2005 Enterprise Edition (64 Bit). So, we were on free trial of the Enterprise Edition for past 5 months. After which we decided to go for SQL SERVER 2005 Standard Edition (64 Bit). And, Last week, we installed the SQL Server Standard Edition (64 Bit) on our server. After installation, everything was restored as before.
The version we are on right now is:
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Strangely, a job which ran fine till then is failing with the following error: And, to be more specific, when this job is run manually in the form of a stored procedure using the query optimizer it runs fine. But, when its executed as a scheduled job on SQL Agent, it fails. The History logs record the following error.
Error :
The OLE DB provider "SQLNCLI" for linked server "LV-SQL2" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "LV-SQL2". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI" for linked server "LV-SQL2" returned message "Invalid authorization specification". [SQLSTATE 01000] (Error 7412).
I tried everything possible, even recreated the job, but, no avail.
I also considered the possibility if SQL Agent login account did not have enough permissions. So, I changed the SQL Agent login to windows authentication, but the job still fails. So, its the problem has nothing to do with login accounts either.
For the record, I have cross checked all these too.
1. Enabled the remote connections in Surface Area Config
2. Added local server login to remote server login mappings.
3. Checked 'Rpc' and 'Rpc Out' under server options. Also, the Connection Timeout and Query Timeout have been set to zero (0).
Any suggestions pointing towards problem solution appreciated.
Thank you.
View 4 Replies
View Related
May 3, 2008
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
View 13 Replies
View Related
Apr 9, 2001
We have a maintenance plan that runs every 15 minutes to backup a transaction log. It fails intermittantly with the message:
"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
This is the only error message to be found in any of the logs. I've checked event viewer, the SQL error logs, exception log, maintenance plan log, sysdbmainplan_history table in msdb, but can't find any extra information. I checked the MSDN for info on this error and this did not add any extra light on the problem.
Does anyone have any ideas on how to de-bug this error?
regards
Stuart Ainsley
View 4 Replies
View Related
Nov 15, 2007
Hi,
This is my first posting and actually I have big problem which I need to resolve immediately:
I have a 38 GB Database on my SQL Server which I want to full-backup. Until now backup was created on the same volume where the database resides. But now the volume is out of disk space. So what we did is that we connected an external USB disk drive with 500 GB to the SQL Server and try to backup there.
But our first and all consecutive backup attemps failed with error SQL-DMO (ODBC SQLState: 42000). It's working fine the first few minutes as we can see that the backup file is continously growing. But then it abruptly aborts with above error message.
Can anyone figure out why ? Any help is appreciated.
Thx
Overlord1970
View 5 Replies
View Related
Jan 18, 2008
Good morning all. I need some help with a stored proc that is driving me up a wall. It's probably something stairing me right in the face but I can't see it!
I keep getting the following error on the procedure that I'm working on:
SQL-DMO (ODBC SQLSTATE: 42000)
ERROR 156: Incorrect syntax near keyword 'AS'
Must declare the variable '@signid'
Must declare the variable '@signid'
Here's the code:
CREATE PROCEDURE [dbo].[ws_savesignature2db]
@xml as text='',
@image as image='',
@imageformat as varchar(20)='',
@imagename as varchar(40)='',
@imagesize as int=0,
AS
insert into signaturetable
([image], imageformat, imagename, imagesize)
values
(@image, @imageformat,@imagename,@imagesize)
/*
if your XML field datatype is Text or nTEXT, use the code below in Sql Server 2000.
If you use Sql Server 2005, you can use varchar(max) or nvarchar(max) which will be
much easier and you do not need the code.
*/
select @signid = @@IDENTITY
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR([xml])
FROM ws_signature
WHERE signid= @signid
if @ptrval is not null
WRITETEXT ws_signature.xml @ptrval @xml
GO
Any help you can give would be a life saver!!!!
Thanks in advance.
Jim
View 3 Replies
View Related
May 26, 2008
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 3 Replies
View Related
Jan 3, 2001
I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
View 1 Replies
View Related
Sep 13, 2001
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies
View Related
Feb 29, 2008
Hi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
View 4 Replies
View Related
Nov 5, 2007
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
View 1 Replies
View Related
May 30, 2008
Hi All,
I am inserting a row in my SSIS_LOG table when my package executes. Here in this table i have column date_dt which is date data type. Once package executes i am getting error like "No authorized routine named "GETDATE" of type "Function" having compatible arguments was found. sqlstate:42884". Note i am using IBMDB2 data provider.
Can anyone help me out?
Thanks in advance,
Anand Rajagopal
View 9 Replies
View Related
Jan 25, 2008
Hi all,
I copied the following code from MSDN2 bcp Utility:
bcp AdventureWorks.Sales.Currency2 in Currency.dat -T -c
and executed it in my C:Program FilesMicrosoft SQL Server90ToolsBinn>.
I got the following errors:
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
SQLState = HYT00, NativeError = 0
Error = [Microsoft][SQL Native Client]Login timeout expired
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Please help and tell me what wrong with this BCP execution or with the database, and how to make this BCP working.
Thanks,
Scott Chang
View 3 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
Feb 12, 2007
I have an application that connects to SQL 2000 thru ODBC.
When our administrators login on the workstation the application
works well. But when ordinary users login they get the following error.
SQLState: 28000
SQL Server Error: 18452
Login failed for user ". The user is not associated with a trusted SQL Server connection.
I have restarted SQL Server and IIS to no avail. We are using SQL and Windows auth mode.
Any ideas? This just started this morning.
View 1 Replies
View Related
Oct 9, 2006
We have an application that connects to SQL 2005 thru ODBC with the following string:
driver=SQL Server;server=server1;database=db2005;uid=serveruser;pwd=pwd1;
When our administrators login on the workstation the application works well. But when ordinary users login they get the following error. (We only have 1 domain)
SQLState: 28000
SQL Server Error: 18452
Login failed for user ". The user is not associated with a trusted SQL Server connection.
Then the standard SQL Server Login window pops up asking for the Login ID and Password. On the window the 'Use Trusted Connection' is checked and the name of the user on the workstation appears on the LoginID. What we do is uncheck the 'Use Trusted Connection' then login using the credentials above.
Need help on this one please. Thanks.
View 9 Replies
View Related
Jan 5, 2006
I have three instances of sql server 2000 on three boxes.
WE collect the data on box1 and box2 and copy that data onto box3. We have couple of stored procedures whhich copy the data from box2 and box1 onto box3. It was working fine for the last few monts. But from last 4 hours the job is failed and its giving the following message
Executed as user: abcdservicestart. SQL Server does not exist or access denied.
[SQLSTATE 42000] (Error 17). The step failed.
But the sqlserver exists on all the 3 boxes and they are connected and even we haven't changed any login info on all the 3 boxes. What could be the reason for the above error.
Thanks.
View 1 Replies
View Related
Jul 29, 2006
Hi,
When i m trying to retrieve data from a table named DAY1(USDCHF1998) , i get this error saying " Sql state 42000, sql error code:155 'USDCHF1998' is not a recognized OPTIMIZER LOCK HINT option ".
But its OK, when i use the table as DAY1USDCHF1998
View 5 Replies
View Related
Jan 20, 2004
create function
"DBO".sf_GetStateID( @Abbr char(2))
returns integer
begin
declare @StateID integer;
set @Abbr=UPPER(@Abbr);
if @Abbr is null
set @Abbr=''
set @StateID=53;
select MIN(lngStateID) into StateID from "DBA".States where strAbbr=@Abbr;
if @StateID is null
insert into States(strAbbr,strName) values(@Abbr,@Abbr)
if SQLSTATE = '00000'
set @StateID=@@IDENTITY
return(@StateID)
end
In this function, I am getting error at SQLSTATE = '00000'. I saw in books online and it says that SQLSTATE is a keyword. It is not recognizing SQLSTATE as a keyword in the function.
Can you help in that?
2nd Error: It is not accepting the statement
select MIN(lngStateID) into StateID from "DBO".States where strAbbr=@Abbr;
I don't see any problem in the above statement. Do help in solving these two problems.
View 1 Replies
View Related
Dec 2, 2004
(SQL SERVER 2000)
I keep getting the "primary filegroup is full" error when ever I try to write data even though the following things are true:
allow unlimited growth set for BOTH database and transaction log
auto shrink and auto update statistics flags are set in database options
growth set to 10 percent for both
database is 4GB but disk has 12GB freespace
transaction log is on same disk but is only 8MB ???
SQL shows the database has 2% free space but any attempts to write cause the error, shrinking drops this to 1% but still produces the same error on writes
SQL shows the transaction log has 90% free space
backup maintenance plans are in operation for both transaction log and database (write to different drive)
I am completely confused!
View 5 Replies
View Related
May 1, 2007
I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
View 20 Replies
View Related
May 22, 2002
What does [SQLSTATE 01000] mean?
View 1 Replies
View Related
Jan 16, 2004
create function
"DBO".sf_GetStateID( @Abbr char(2))
returns integer
begin
declare @StateID integer;
set @Abbr=UPPER(@Abbr);
if @Abbr is null
set @Abbr=''
set @StateID=53;
select MIN(lngStateID) into StateID from "DBA".States where strAbbr=@Abbr;
if @StateID is null
insert into States(strAbbr,strName) values(@Abbr,@Abbr)
if SQLSTATE = '00000'
set @StateID=@@IDENTITY
return(@StateID)
end
In this function, I am getting error at SQLSTATE = '00000'. I saw in books online and it says that SQLSTATE is a keyword. It is not recognizing SQLSTATE as a keyword in the function.
Can you help in that?
2nd Error: It is not accepting the statement
select MIN(lngStateID) into StateID from "DBO".States where strAbbr=@Abbr;
I don't see any problem in the above statement. Do help in solving these two problems.
Tks
K.
View 1 Replies
View Related
Jan 21, 2004
Hi ,
I am getting following error.
Select error : SQLSTATE = S1003
[microsoft][ODBC Driver Mananger]PRogram type out of range.
I am using PB 5.0 and SQL Server 2000. Operating system is XP.
Please let me know what is to be done.
Regards,
Abhijit.
View 2 Replies
View Related
Apr 27, 2004
can anyone send me the syntax of how to use sqlcode / sqlstate to handle sql operation success in vb6 code ??, any other error handlers will also do the job ...
thank you in advance
View 1 Replies
View Related
Mar 13, 2007
Hi;
I wrote a simple script in Sql Server Agent, now am not happy with the "[sqlstate 01000]" statement in the output.
does anyone know how i can elliminate this?
View 2 Replies
View Related
Jul 29, 2005
Does anyone know how to suprime
View 7 Replies
View Related
