This query was working well because I used to only be interested in one counter that was returned in the column, which was 'Free Megabytes'...I now have additional data that shows up as 'Total Disk Space'...Ideally, the query would return the total disk space next to the free megabytes on the same row for the same disk drive. Here is a couple rows of sample output:
AverageValueInstanceNameObjectNameCounterName
44549 C: LogicalDiskFree Megabytes
44548 C: LogicalDiskFree Megabytes
69452 C: LogicalDiskTotal Disk Space
69452 C: LogicalDiskTotal Disk Space
This is the ideal format, the average value column goes away:
InstanceNameObjectNameFree MegabytesTotal Disk SpaceC: LogicalDisk44549 69452
all the columns are separated with a "|" but the amount of columns are not fixed, so in lines 1 & 2 they are 4 columns and in line 3 there is 7 columns
Currently I have a column with multiple postcodes in one value which are split with the “/” character along with the corresponding location data. What I need to do is split these postcode values into separate rows while keeping their corresponding location data.
For example PostCode Latitude Longitude 66000/66100 42.696595 2.899370 20251/20270 42.196471 9.404951
Would become PostCode Latitude Longitude 66000 42.696595 2.899370 66100 42.696595 2.899370 20251 42.196471 9.404951 20270 42.196471 9.404951
Currently I have a column with multiple postcodes in one value which are split with the “/” character along with the corresponding location data. What I need to do is split these postcode values into separate rows while keeping their corresponding location data.
Hi Everyone,I've been given the painstaking project of splitting a single column into multiple columns and rows. I have a solution set up in which I will be posting further down the post but I want to see if there is a much more efficient solution to this.sample data:create table tbl_list(pk_int_itmid int(5) Primary Key,vchar_desk vchar(300));create table tbl_test1(fk_int_itmid int(5) references tbl_list(pk_int_itmid),vchar_itm varchar(60));insert into tbl_list values(1, 'this item');insert into tbl_list values(2, 'that item');insert into tbl_list values(3, 'those items');insert into tbl_test1 values(1, 'A, B - C, D, E - F, G, H - I');insert into tbl_test1 values(2, 'J, K - L, M, N - O');insert into tbl_test1 values(3, 'P, Q - R');into this table:create table tbl_output(fk_int_itmid int(5) references tbl_list(pk_int_itmid),vchar_itmA varchar(60),vchar_itmB varchar(60),vchar_itmC varchar(60));Output in comma delimited form:'1', 'A', 'B', 'C''1', 'D', 'E', 'F''1', 'G', 'H', 'I''2', 'J', 'K', 'L''2', 'M', 'N', 'O''3', 'P', 'Q', 'R'my current solution:create view vw_itm_a as select fk_int_itmid, substring(vchar_itm, 0, charindex('-',vchar_itm)) as vchar_itmA,substring(vchar_itm, charindex('-',vchar_itm)+1 , charindex(',',vchar_itm)-charindex('-',vchar_itm)) as vchar_itmB,substring(vchar_itm, charindex(',',vchar_itm)+1) as vchar_itmCfrom tbl_test1where charindex(',',vchar_itm) >1Gocreate view vw_itm_b as select fk_int_itmid, substring(vchar_itm, 0, charindex('-',vchar_itm)) as vchar_itmA,substring(vchar_itm, charindex('-',vchar_itm)+1 , charindex(',',vchar_itm)-charindex('-',vchar_itm)) as vchar_itmB,substring(vchar_itm, charindex(',',vchar_itm)+1) as vchar_itmCfrom vw_itm_awhere charindex(',',vchar_itmC) >1;Gocreate view vw_itm_c as select fk_int_itmid, substring(vchar_itmC, 0, charindex('-',vchar_itmC)) as vchar_itmA,substring(vchar_itmC, charindex('-',vchar_itmC)+1 , charindex(',',vchar_itmC)-charindex('-',vchar_itmC)) as vchar_itmB,substring(vchar_itmC, charindex(',',vchar_itmC)+1) as vchar_itmCfrom vw_itm_bwhere charindex(',',vchar_itmC) >1;Go;create view vw_itm_d asselect fk_int_itmid, vchar_itmA, vchar_itmB,substring(substring(vchar_itm, charindex(',',vchar_itm)+1), 0, charindex(',',vchar_itm)) as vchar_itmCfrom vw_itm_a ia union vw_itm_b ib on ia.fk_int_itmid = ib.fk_int_itmidGo;create view vw_itm_e asselect fk_int_itmid, vchar_itmA, vchar_itmB,substring(substring(vchar_itm, charindex(',',vchar_itm)+1), 0, charindex(',',vchar_itm)) as vchar_itmCfrom vw_itm_c ia union vw_itm_b ib on ia.fk_int_itmid = ib.fk_int_itmidGo;create view vw_itm asselect fk_int_itmid, vchar_itmA, vchar_itmC, vchar_itmC from vw_itm_awhere fk_int_itmid not in (select fk_int_itmid from vw_itm_b)unionselect fk_int_itmid, vchar_itmA, vchar_itmC, vchar_itmC from vw_itm_dunionselect fk_int_itmid, vchar_itmA, vchar_itmC, vchar_itmC from vw_itm_bwhere fk_int_itmid not in (select fk_int_itmid from vw_itm_c)unionselect fk_int_itmid, vchar_itmA, vchar_itmC, vchar_itmC from vw_itm_eunionselect fk_int_itmid, vchar_itmA, vchar_itmC, vchar_itmC from vw_itm_cGo;select fk_int_itmid, vchar_itmA, vchar_itmC, vchar_itmC into tbl_outputfrom vw_itmIs there a much more efficient manner of handling this column splitting?ThanksDC
I have a table with millions of rows, 1 particular attribute "FromPerson" contains a string of email addresses, names, etc... for example (formatting done by this window... not exists in database...completely cleaned to semi-colon delimited)
tomh@gmail.com; Snyder, John N.; jsnyder@yahoo.com; Miller, Jim; millerj@gmail.com; Tenbrow, Jack; Katie Winslow (can be x number of names, emails...)
as you can see... some of the delimited values match up with an email address, others have just names, or emails... I have successfully split this into 1 row per value per say, but how do i get them to match up the values that do. I think the splitting is really not helping the cause... what i want is this...
tomg@hotmail.com tomg@hotmail.com Snyder, John N. jsnyder@yahoo.com Miller, Jim millerj@gmail.com Tenbrow, Jack Tenbrow, Jack Katie Winslow Katie Winslow
there could/can be other attributes, like datetime stamp, domain(if any)... etc... but I think I can add that later...
I have to split a column using comma a delimiter into multiple columns. I am able to do it if i know how many column will be present in the final output. But in daily run, the columns may vary randomly.
how to split columns without hardcoding how many columns it ll come.
This is the code am using
Code: WITH Split_Names (Fil_id,Name, xmlname) AS ( SELECT Fil_ID,
I have a table that has multiple postal codes in one of the columns. Those have to be split up one per line and stored in another table. The zip codes are comma seperated. Is there a function that can do this...?
Example data in ZipCodeTable. (Name and ZipCode are 2 columns in a table)
I am trying to return as a dataset of this that shows the ID as column 1 then each value in the 2nd column as individual columns if I use SELECT LEFT('2ndColumn,PATINDEX(',',2ndColum)-1) I can return the first value as a column but then can't return any further values individually after the first column, I am just learning the new functionality in SSIS so not sure whether this would be my answer as apposed to T-SQL, if anyone has any advice on this it would be greatly appreciated?
Hi i want to create a table as follows :if exists (select * from dbo.sysobjects where id =object_id(N'[Indexes]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)drop table [Indexes]GOCreate table Indexes(indexname Varchar(100), index_DescriptionVarchar(100), index_keys Varchar(100))GOINSERT INTO Indexes EXEC sp_helpindex 'SDM_Fact_Order_Detail'GOThis will give me a table (northwind)IX_Auto_SDM_Fact_FK_Shipped_Date nonclustered located onSAMIS_SDM_Index FK_Shipped_DateIX_Auto_SDM_Fact_Order_Detail_FK_Insert_Dateclustered located onSAMIS_SDM_Data1FK_Insert_Date, FK_Insert_TimeAs you see sp_helpindex will give me a comma seperated field. I wantto split the third column FK_Insert_Date, FK_Insert_Time into a extrarowLike this :IX_Auto_SDM_Fact_FK_Shipped_Date FK_Shipped_DateIX_Auto_SDM_Fact_Order_Detail_FK_Insert_Date FK_Insert_DateIX_Auto_SDM_Fact_Order_Detail_FK_Insert_Date FK_Insert_TimeCan anyone help me with this?ThanxHennie
I have a very interesting problem in T-SQL coding for which I can't figure out the solution. Actually there is a Line_1_Address column in our data warehouse address table which is being populated from various sources. Some sources have already concatenated house number + street address fields in the Line_1_Address column whereas one source has separated columns for both data fields.
Now I'm trying to extract data from this data warehouse table and I need to split the house number from street address and load it into separate columns in my destination table. In case there is no data for house number then I should load it as NULL.
The issue is that data in this Line_1_Address column is very inconsistent so I don't know which functions to use. Here is some sample data for your consideration:
Line_1_Address 101 E Commerce ST 120 E Commerce ST 2 Po Box 301 W. Bel Air Ave West Main Street, PO Box 1388
I have a description field in a table which also stores unit of measure in the same column but with some space between them, I need to split these into two different columns.
Hello and thanks in advance to any and all help on this post!
I am trying to create a report that uses a simple select against one table in the database:
select a,b,c from MyTable where d = 1 order by a
For ease of explanation, this returns 75 records. This report is to be used as a one page Flyer. Now I can create a single table and format it but I end up with three pages instead of one. My thought was to split the data returned between two side by side tables on this report. I cannot seem to find a way to do this through the properties of each table or an example of any expression that could help with this outside of RowCount (which simply does a page break), nested SELECTs to emulate LIMIT as in MySQL, or SELECT TOP n ORDER BY ASC / DESC to get a TOP N or BOTTOM N from a SQL Query.
I know I can't be the only one to have ever thought of this as a solution, I hope not at least , so I was hoping someone here may be able to help out. Thanks again in advance!
One table is like this CREATE TABLE p1 (SNo VARCHAR(30)) And Data in the Table p1 is:
Sno
1,0
12,0
1,20
100,21
1001,21
There is One more Table p2 CREATE TABLE p2 (TravelerID INT, GDId INT)
Now my Requirement is Left side part of SNo(Before comma) Whatever the data is there like 1,12,1,100,1001 will be pushed into p2 table of TravelerID Column.And Right side part (Data like 0,0,0,21,21) will be pushed into p2 table of GDId Column.Ultimately Table should look like below format.
PremID is just the PrimaryKey. Then there's the year, and then a load of float fields, each representing a premium paid for each month of the year (01=Jan, 02=Feb etc).
Now what I am looking to achieve is to create separate rows for Table1 from this data.
Starting in January (Prem01), I wish to record a separate line each time the premium amount changes. The best way of exlaining this is to give an example based on the above data.
For the first row (2013), the premium at the start of the year (Prem01) is 100.00. This premium remains until it changes in Prem10 to 130.00. It then remains 130.00 for the rest of the year (Prem10 to Prem12). For this I would want to create 2 rows of data for Table1. The result should look like below.
I have a large poorly designed table (inherited) With a Name field that contains comma delimited text containing address information. I need to do several things with it but unfortunately there doesn't appear to be any true consistency in it. When it displays in its own text box it works by placing each section on a new Line and looks ok.But I need to pull it apart and place things like unit number, Building Name in its own column etc. In the data it could be in either the 2nd,3rd, 4th, dependent on what came 1st. the data looks some thing like the following
unitNumber/StreetNumber Space StreetName (Building Name), Subub,City,Country
Some addresses won't have unit number or Suburb or country so when splitting you could have Suburbs and Citys in multiple columns even if you try and stagger the split process.Has any body go a good tool or reference site for dealing for this sort of problem. I have a table that I have made up that has some of the street names that could be used for comparing against existing records but it is by no means fool proof due to spelling inconsistencies . I also have another list of Common building names that could be used to compare, remove and place in the new building column.
What I need is split the data into two columns if data in column Main starts with 'PR-' then output result to column P and if it starts with 'CC-' then to column C (the output needs to be in one table).
I receive a file that will have hyphens between data items such as 123-aed-edr-45r-ui9 1-ed3-45r-rrr-98u I need to split the values to load into a table that will hold the 5 separate data itens. The fields will always have the hyphens but could be different lengths. Any idea on a best approach to split this in tsql
Hi to everyone,My problem is, that I'm not so quite sure, which way should I go.The user is inputing by second part application a long string (let'ssay 128 characters), which are separated by semiclon.Example:A20;BU;AC40;MA50;E;E;IC;GREENNow: each from this position, is already defined in any other table, asa separate record. These are the keys lets say. It means, a have someproperities for A20, BU, aso.Because this long inputed string, is a property of device (whih alsohas a lot of different properities) I could do two different ways ofstoring data:1. By writing, in SP, just encapsulate each of the position separatedby semicolon, and write into a different table with index of device,and the position in long stirng nearly in this way:Major device data tableID AnyData1 AnyData2 ... AnyData3123 MZD12 XX77 .... any comment text124 MZD13 XY55 ... any other commentString data Tablefk_deviceId position value123 1 A20123 2 BU123 3 AC40.....123 8 GREENThe device table, contains also a pointer (position), which mightchange, to "hglight" specified position.Then, I can very easly find all necessary data. The problem is, I needto move the device record data (from other table) very often into otherhistory table (by each update). That will mean, that I also need tomove all these records from 1 -8 for example to a separate historytable, holding the index for a history device dataset. This is a littleinconvinience in this, and in my opinion, it will use to much storagedata, and by programming, I need always to shift this properities intohistory table, whith indexes to a history table of other properities.2. Table will be build nearly in this way:Major device data tableID AnyData1 AnyData2 ... AnyData3 stringProperty pointer123 MZD12 XX77 .... any comment text A20;BU;AC40;MA50;E;E;IC;GREEN 3124 MZD13 XY55 ... any other comment A20;BU;AC40;MA50;E;E;IC;GREEN 2By writng into device table, there will be just a additional field forthis string, and I will have a function, which according to specifiedpointer, will get me the string part on the fly, while I need it.This will not require the other table, and will reduce the amout ofdata, not a lot ... but always.This solution, has a inconvinance, that it will be not so fast doing asearch over the part of this strings, while there will be no real indexon this.If I woould like to search all devices, by which the curent pointervalue is equal GREEN, then I need to use function for getting thevalue, and this one will be not indexed, means, by a lot amount ofdata, might be slow.I would like to know Your opinion about booth solutions.Also, if you might point me the other problems with any of thissolution, I might not have noticed.With Best RegardsMatik
I have a report I'm designing where, as a simple SQL report viewed only on a screen, it was irrelevant how wide it was. However, now I've been asked to duplicate this report in SSRS and to include the option to print it out.
Well, the problem is, as it stands - with 8pt font, even - it will require a sheet of paper about 24" wide to get all of a single row to print.
So, I'm trying to create a Tablix that will split the data into two sets of header/detail rows in the same Tablix. Any workable solution that doesn't involve writing an app in basic or C.
We have a 5 TB database in our environment. Both MDF & LDF are location in 1 single drive which is of 10 TB.
Now, we want to move to new server but we have multiple drives each of max 1 TB per drive. How can I go about splitting the data from 1 MDF files into multiple data files? How about moving indexes ?
SQL Version : Microsoft SQL Server 2012 (SP1) - 11.0.3513.0 (X64) - Enterprise Edition (64-bit)
If you see below there are 2 customer names on 1 loan, most of them share the same lastname and address, I want to separate it with fields,LoanID, customer 1 Firstname, Customer 1 Lastname, Customer 2 FirstName, Customer 2 Lastname, Adddress,zip
LEFT JOIN Status As S on S.LoanID = L.LoanID LEFT JOIN Borrower B on B.LoanID = L.LoanID LEFT JOIN MailingAddress MA on MA.LoanID = L.LoanID where S.PrimStat = '1' and B.Deceased = '0'
I have an SSIS package that moves data from SQL Server to an legacy Access database. In SQL Server, there is a date/time column that I need to split into a separate date column and time column in the access database. Initially I just created a derrived column for the time and set the expression equal to the source date/time column from SQL Server. Unfortunately, that just makes the date column and time column the same having the full date/time.
What expression can I use during a derrived column transformation to assign just the date to a derrived column and just the time to another derrived column?
I have a table with Million plus records. Due to Running Totals article, I have been able to calculate the Trial_Balance for all months.
Now I am trying to provide a Beginning Balance for all months and the Logic is the Beginning Balance of July would be the Trial_Balance of June. I need to be able to do this for multiple account types. So the two datasets that need to be included in logic is actindx and Calendar_Month.
For actindx of 2 and Calendar_Month of 2014-01-01The Trial_Balance_Debit is 19585.46 This would make the Beginning_Balance of actindx 2 and Calendar_Month of 2014-02-01 19585.46
I am trying to do some type of self join, but not sure how to include each actindx number differently.
Table creation and data insert is below.
SET ANSI_NULLS ON GO
SET QUOTED_IDENTIFIER ON GO
SET ANSI_PADDING ON GO
CREATE TABLE [dbo].[TrialBalance]( [Trial_Balance_ID] [int] IDENTITY(1,1) NOT NULL,
Hi everyone,I encountered an error "Need to run the object to perform this operationCode execution exception: EXCEPTION_ACCESS_VIOLATION" When I try to import data from Oracle to MS SQL Server with EnterpriseManager (version 8.0) using DTS Import/Export Wizard. There are 508 rowsin Oracle table and I did get first 42 rows imported to SQL Server.Anyone knows what does the above error message mean and what causes therest of the row failed importing?Thanks very much in advance!Rene Z.--Posted via http://dbforums.com
Using MDS 2012: I have an entity "XYZ_Entity". In "XYZ_Entity" entity I have 2 domain based Columns "DealerGroup" and "Dealer".
While inserting information into "XYZ_Entity" entity user can select the required dealer group from domain base Dealer Group values. Now for selecting Dealer he wants the dealers to be filter based on selected dealer group and he can select from the filtered list. reason to do that is he don't want to go through thousands of dealers and select an incorrect one.
Hi, I was wondering how I can complete a column (which doesnt have an input one) with data. For example:
I have a sql query which bring data of 3 columns
ID | FISRT NAME | LAST NAME 1 MIKE MORGAN 2 SARA JOHANES
So, I will insert that data in a FLAT FILE CONNECTION MANAGER, which I configured with 3 columns and I did the corresponding mapping in the FLAT FILE DESTINTATION.
Now, If I add one more column in the FLAT FILE CONNECTION MANAGER, I will not have it mapped to a input one, obviously. So, what I need is to add one more column to the flat file destination and complete it with zeros values in it.
Probably I can solve this part by introducing a DERIVED COLUMN and there I can configure the zeros that I want to add to the column. But I'm not sure if I can do that without having a input column. So, the question will be, how can I add one column to a flat file which doesnt have a input and introduce any value that I want to it? Hope I was clear Thanks for your help.
