I need to copy a database from one server (A) to another server (B). The database in Server A has only one datafile (which is about 42 Gb ...). I'd like to copy the database to Server B but I don't want only a datafile. I'd like to spread
on at least 2 datafiles. Exemple:
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET. I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page. Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer. Cheers ~ J
Hi,I have a table as follows:HostId PurposeId====== =========1 31 51 62 12 3I'm looking for a query which will return:HostId Purposes====== ========1 3, 5, 62 1, 3Is it possible?Thanks in advance.
Just can't figure this out. I'll try not to give a long-winded explanation (I hope), let's say this is the table, for example: [Table1] RowNumber | Value 1 | 4 2 | 6 3 | 3 4 |10 5 | 6 6 | 5 7 | 8 8 | 8 9 | 2 10 | 6
I want to write a query that creates a column whose values are similar to (ROW_NUMBER -1), and resets each time a value is present. Using the above example, 6 will be the test value. So, I want to know how many rows it takes till 6 is repeated.
I think PARTITION BY can be used somewhere, with the ORDER BY on the [RowNumber] - but I'm just not sure on which ranking function to use, and how to reset the Ranking on the number 6 (above example).
Any help would be appreciated. This has been a mind-teaser for me, and I give
I've a problem with excel destination spread sheet.I've created a package which pulls the data from sql server and load it into excel sheet.The main thing Ive to do is I've to create different destination tables(work sheets) for different data.i.e.,The source is a sql query which pulls the data in groupwise with group by clause.So,I've to create individual work sheet for each group with that data.How it can be done.Please, advice me.
I have to run a simple query (say select name from table where id = 4) and get those results and make it into a report. I am not sure I have crystal reports (do I have to install some thing for this?). So what is the easiest way to create this? May in in a spread sheet or some thing like this? I am so new to SQL Server Thanks
I am inserting data into a spread sheet from user interface(power builder). But at the same time some one can open that excel spread sheet to read the data. Then the process was going to fail(it won't able to write the data in to the spread sheet). How to avoid this situation? I really appreciate if anyone can shed some light.
I have a spread sheet which has 4 columns called cusip, Chartheader, growthdates and NAV.. and i also have the same number of columns in the Sql server... and I want to add another column called Rownumber and set it as int indentity... and when i try to import the data to sql server i am getting this error called Received an invalid column length from the bcp client for colid 1.
I have an issue where I have multiple rows of data and I need to reduce a dollar amount by a fixed maximum. I am going to throw some code in here to give a rudimentary idea of the data and what the final result should be.
I need to run an update so that the result of the following query:
select LineNum, Code, Amt, MaxAmt from
@tblLooks like this:
LineNum Code Amt MaxAmt ----------- ---- --------------------- --------------------- 1 AA 10.00 50.00 2 AA 20.00 50.00 3 AA 20.00 50.00
(3 row(s) affected)
I have tried cursors but got unexpected results or the MaxAmt always defaulted to the original even if I updated it. This seems like a simple problem but I have been banging my head against the wall for 2 days now. I've written some pretty complicated updates with less effort than this and I must have some mental block that is keeping me from figuring this out.
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database: Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
I am developing a C# mobile 5.0SDK app that utilizes SQL2005 Compact Edition device files on Vista using as far as I know the latest SPs and versions.
Last night, I could open tables from the Server Explorer .sdf file, see the contents, edit the schema, etc. Now today, I assume all of a sudden,I am able to open schema but cannot open the table to see the contents. I get:
Microsoft SQL Server 2005 Compact Edition captioned error dialog box that says "Access to the database file is not allowed. [ File name = ],[,,]
Using Sql Server 2005 Management Studio Express, I can open the table, do queries etc. I have tried rebooting, deleting, opening old projects, deleting dataset, disconnecting mobile device, but I still get the same error. I have tried stopping the SQL Server(SQLEXPRESS) service on the server but get:
Cannot open MSSLQ$SQLEXPRESS service on computer 'p5w64'. Access is denied.
I have no idea what to do next to start moving forward again, other than try the XP environment which I will do next.
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
What is the recommended size and file growth for a database and log file? We will be storing approx 10000 records a day.Currently we have the following:
CREATE DATABASE Dummy ON PRIMARY ( NAME = Dummy_data, FILENAME = 'D:....DATADummy.mdf', SIZE = 250MB, FILEGROWTH = 25MB ) LOG ON ( NAME = Dummy_log, FILENAME = 'D:....DATADummy_log.ldf', SIZE = 50MB, FILEGROWTH = 5MB ) ; GO
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
I want to load data that i receive everydays from my customers in .xls file format (excel) or cvs file format, to the database that i have created on this purpose. but when trying to do that whith SSIS; i got an error message .... that i can't import redudant data in my database column.
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is: "The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. " The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that. Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online? Brian [ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
I'm in the final stage of my asp.net project and one of the last things I need to do is add the following file information to my SQL server 2000 database when a file is uploaded:
First of all I have a resource table to which I need to add: - filename - file_path - file_size (the resource_id has a auto increment value)
so that should hopefully be straight forward when the file is uploaded. The next step is to reference the new resource_id in my module_resource table. My module resource table consists of: - resource_id (foreign key) - module_id (foreign key)
So, adding the module_id is easy enough as I can just get the value using Request.QueryString["module_id"]. The bit that I am unsure about is how to insert the new resource_id from the resource table into the module_resource table on file upload. How is this done? Using one table would solve the issue but I want one resource to be available to all modules - many to many relationship.
I used SQl Server replication to create a new database (as I did using Visual Studio 2003) but when I go the Pocket PC and click on the file I get a native error 25011 with a description
The file is not a valid database file An Internal error has occurred[,,,Databasename,,] Interface defining error: IID_IDBInitialize
When I check on my Pocket PC what programs are available I've got Query Analyser 3.0 and SQLCE Query. It appears that the .sdf file is associated with SQLCE Query because when I use that to try and connect to the same database I get the same error.
If I use Query Analyser 3.0 (after having copied the .sdf file) to the temp directory I'm able to open the database.
There is a similar post to this one but it doesn't help me.
Is it that SQLCE Query is wrongly associated with the .sdf file?
If so how do I change that?
Or is there some other problem preventing me clicking on the .sdf db to open it?
I have recreated my project in Visual Studio 2005 and rebuilt all my components in 2005. There are some external ones that I use that I can't do this for.
The following is the build output that I get when I deploy to a clean PDA with a hard reset performed
------ Build started: Project: Printing, Configuration: Release Any CPU ------ No way to resolve conflict between "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" and "System.Data.SqlServerCe, Version=1.0.5000.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" arbitrarily. Printing -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll ------ Build started: Project: MobileSeller, Configuration: Release Any CPU ------ Consider app.config remapping of assembly "System.Data, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes"
from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Data.dll] to solve conflict and get rid of warning. Consider app.config remapping of assembly "System.Windows.Forms, Culture=neutral, PublicKeyToken=969db8053d3322ac,
Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Windows.Forms.dll] to solve conflict and get rid of warning. Consider app.config remapping of assembly "System, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from
Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.dll] to solve conflict and get rid of warning. C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Microsoft.Common.targets : warning MSB3247: Found conflicts between different
versions of the same dependent assembly. MobileSeller -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(546,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform. C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(634,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform. C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(706,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform. C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(846,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform. Done building project "MobileSeller.vbproj". ------ Skipped Deploy: Project: BO, Configuration: Release Any CPU ------ Project not selected to build for this solution configuration ------ Skipped Deploy: Project: Printing, Configuration: Release Any CPU ------ Project not selected to build for this solution configuration ------ Deploy started: Project: MobileSeller, Configuration: Release Any CPU ------ Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Data.Adoce.dll' Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Interop.dll' Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePocketHTMLprint_NetCF.dll' Deploying 'C:DevMILLAR CODE CABINETVS2003CFReferencesUSICF.dll' Deploying 'C:DevVS2005CFReferences eleaseSignature.dll' Deploying 'C:DevVS2005CFReferences eleaseRealUpDown.dll' Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll' Deploying 'C:DevVS2005CFReferences eleasePhoneAPI.dll' Deploying 'C:DevVS2005CFReferences eleaseMVnetApplication.dll' Deploying 'C:DevVS2005CFReferences eleaseMobileHList.dll' Deploying 'C:DevVS2005CFReferences eleaseMobileGrid.dll' Deploying 'C:DevVS2005CFReferences eleaseImageButtons.dll' Deploying 'C:DevVS2005CFReferences eleaseCreditCardValidator.dll' Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseBO.dll' Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe' ========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ========== ========== Deploy: 1 succeeded, 0 failed, 2 skipped ==========
I'm not really sure my question belongs to here...
I have a database in Access (from microsoft office, of course), and I want to transfer convert it to SQL Server. Does anyone know how I can do it? It must be very simple, but I haven't found it yet....
I am in a trouble without doing any mistake. I restarted while in parallely my sql server was restarting i.e I opened a management studio.
When it booted up next time. I see that my database is gone. Though it is showed up in the server but has no node below it. I then checked the mdf files and ldf files and found mdf file to be of 0 KB and ldf file is of 1.73 GB. My database was in full recovery mode but i did not take any database backup.
Here ais the entry from my SQL server log:
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0000000000000000 in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAHello.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. I wonder if now there is a case to recover my database..Can I restore/recover the database from .ldf file as it was in full recovery model?Any help i shighly appreciated.
I had to to relocate the database log file and I issued an Alter database command but by mistake I put a space in the file name as below. The space is at the beginning file name. Now I am unable get the database loaded to SQL Server. The database has 2 replications configured, so deleting and re-attaching the database means the replication needs to be re-configured. Is there an alternative way to issue a command to update the database FILENAME ? Not sure if this can be edited in master database (sys files).
ALTER DATABASE [User_DB] MODIFY FILE (NAME = User_DB_log, FILENAME = 'I:SQLLogs User_DB_log.ldf') GO
I downloaded and ran AdventureWorks.msi into my SQL Server Management Studio Express (SSMSE) one year ago.But I did not know how to attach it to my SSMSE then. Last week, I deleted it from the "Add or Remove" of Control Panel and I downloaded the new AdventureWork.msi and installed it my SSMSE. Today, I tried to use the Database Explorer of VB 2005 Express for the first Stored Procedure programming. I clicked on AdventureWorks.mdf and I got the following error: One or more files do not match the primary of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupt and should be restored from a backup. Cannot open user default database. Login failed. Login failed for user 'CENADe1enxshc'. Log file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data_log.ldf' does not match the primary file. It may be from a different database of the log may have been rebuilt previously. Please help and advise me how to correct this problem.
i have a old database in foxpro and it has to be converted to sql server 6.5 database . the table in the foxpro has been broken into more than 1 tables in the sql server . so how can i transfer the data from 1 foxpro table to different tables in sql server 6.5. vineet
I'm getting this error while trying to insert records into a SQL Server Compact Edition database. I have pasted my connection string that was used when creating the database as well as for accessing that same database from my Windows application.
Thanks for any help any of you can give!
Data Source=OnTheGo.sdf;Encrypt Database=True;Password=<password>;Max Database Size=4091
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
Hi, I want to retrive the values from the database 'northwind' and then i want to store the backup files in "D:/Sample/north_database.bak" format(local machine). I retrive the database values in .txt,XML format. Now i want to take in .bak format. give the Suitable solution for this. Subashini.G
I have the database file and log file for all the databases in SQL server in the same drive. I want to seperate both the log and data file into different drives. What is the best way to do it? Is there any script that could be run.
Last week I backed up my SQL Server by using BE 2012. I named the file "SQL Server BAK" which contained copies of my SQL Server databases. A few days ago I lost some part of my data due to accidental deletion. I backed it up, so I tried to restore the database from the .bkf file. The problem comes here, when I try to to restore my .bkf file, it becomes inaccessible.what causes this?
