This Table is updated as users rate forum threads.
Then I have Table_B which should display the some info in a Gridview
Table_B has 3 fields: Name, ID and Score
I want the Rating from Table_A to update to Table_B's Score Field.
I suppose I should write a sproc to do this, but I am not quite sure how;
This is what I would like the sproc to do...
Update Table_B
SET Score = Table_A.Rating WHERE ID = Table_A.ThreadID
Any help on this...or is there a should I not use a sproc.
Also...how do I get the sproc to update the table automatically (without me running the sproc manually)?
I have a sproc called usp_validTicker that will take 2 parameters: ticker and date. It will return the valid ticker for that date. I like to have the sproc going through each ticker in the table and return the valid tickers.
For example exec usp_validTicker 'AAB-Bank','2008-6-10' will return 'AAB' and my final table will be
Here is a query which updates certain values. GetAddress is another sproc which returns addrId. I have to pass certain values ie strAddress1 strCity .....intZip4 values in the sproc GetAddress and execute the update query. In doing so it says GetAddress in not a recognized function name. Is the syntax correct to exec sproc GetAddress.
update Persons set Persons.strLastName=H.strLastName, Persons.strNameSuffix=H.strNameSuffix, Persons.lngHomeID= GetAddress (H.strAddress1,strAddress2,H.strCity,H.strState,H. strZip,H.intZip4), Persons.lngMailID= GetAddress(H.strAddress1,strAddress2,H.strCity,H.s trState,H.strZip,H.intZip4) from ALSHeadr H where Persons.lngSSN=H.lngFedTaxID
FYI I can post GetAddress sproc but it is working properl. I just want to know how to pass the values in ALSHeadr table into the sproc.
Does anyone know the system tables I need to query to produce a report of stored procedures (SQL 2005) that had any changes made to them in a user-specified date range?
In SQL 2005, I saw the canned database reports, but this one didn't exist. Any help would be greatly appreciated.
How can I determine when a sproc or table was last used? I suspect that I have many obsolete tables and sprocs in my database but how can I find out for sure?? Thanks, DL
Here's the error: Input string was not in a correct format. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.FormatException: Input string was not in a correct format.
Source Error:
Line 159: Line 160:objConn.Open() Line 161:objCmd.ExecuteNonQuery() Line 162:objConn.Close() Line 163:
[FormatException: Input string was not in a correct format.] System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +723 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +194 managecatalog.SubmitProd(Object s, EventArgs e) in C:FullerAviationSupplymanagecatalog.vb:161 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +57 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain() +1277
-------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Here's the code from my vb file:
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init 'CODEGEN: This method call is required by the Web Form Designer 'Do not modify it using the code editor. InitializeComponent() End Sub
#End Region
Protected WithEvents dgProductCatalog As datagrid Protected WithEvents tbxProductName As TextBox Protected WithEvents tbxInventory As TextBox Protected WithEvents dgCatProd_Active As DropDownList Protected WithEvents dlvendor As DropDownList Protected WithEvents dlSubcat As DropDownList Protected WithEvents btnLinkvend As Button Protected WithEvents tbxshortdesc As TextBox Protected WithEvents tbxlongdesc As TextBox Protected WithEvents qtyPA As TextBox Protected WithEvents pricePA As TextBox Protected WithEvents qtyPB As TextBox Protected WithEvents pricePB As TextBox Protected WithEvents qtyPC As TextBox Protected WithEvents pricePC As TextBox Protected WithEvents sizeX As TextBox Protected WithEvents dlX As DropDownList Protected WithEvents sizeY As TextBox Protected WithEvents dlY As DropDownList Protected WithEvents sizeZ As TextBox Protected WithEvents dlZ As DropDownList Protected WithEvents weight As TextBox Protected WithEvents dlweight As DropDownList Protected WithEvents dgInsertProduct As Button Protected WithEvents thumbfile As TextBox Protected WithEvents mainfile As TextBox
Dim objDA As SqlDataAdapter Dim objDS As New DataSet() Dim objDX As New DataSet() Dim objDV As New DataSet() Dim objDU As New DAtaSet() Dim objDW As New DAtaSet() Dim objDT As DataTable Dim objDR As DataRow Dim objConn As SqlConnection = New SqlConnection(ConStr)
I have a bunch of un-related tables that I need to make relational.
I have a bunch of SProcs set up to help with the relating of the tables but I need the quickest way to get the values from the tables and into the SProcs.
Currently, I'm using .NET to cycle through the necessary tables, sending in their values into the SProcs, one at a time.
I'd like to have some SQL-ized way to do this so I can just make another step in my DTS package that already copies over the un-related tables from DB2.
What I'd imagine the code to look like would be something like...
EXEC SP_EMPLOYEES (SELECT FIRST_NAME,LAST_NAME FROM oldEmployees)
I know, now, that it's not as easy as that but I'm thinking there MUST be a way - even if it requires creating a new SProc. TIA
Hi. This is a SQL question. I am trying to wrap a stored procedure with a UDF so I can do selects against the result. The following doesn't work, but is it possible to do something like: Create Function test()returns @tmp table ( myfield int)asbegin insert into @tmp (field1) Exec dbo.MySprocWhichRequires3ParmsAndReturnsATable 5, 6, 10 output returnend Thanks
My goal is to recreate a table daily so that the data is updated. This could be a bad decision performance-wise, but I felt this was simpler than running a daily update statement. I created a stored procedure:SET QUOTED_IDENTIFIER ON GO SET ANSI_NULLS ON GO
CREATE PROCEDURE sp_CreatetblImprintPhrase
AS
DROP TABLE tblImprintPhrase
GO
CREATE TABLE tblImprintPhrase ( CustID char(12), CustName varchar(40), TranNoRel char(15) ) GO However, I was looking to edit the stored procedure, changing CREATE to ALTER, but when I do so, I am prompted with: Error 170: Line 2: Incorrect syntax near "(". If I change back to CREATE, the error goes away, but the sproc cannot be run because it already exists. Any thoughts?
Hi. It seems to be very simple, actually, but I don't know if it isfeasible in TSQL. I have a sproc which gathers in one place many callsto different other sprocs, all of them taking a 'StoreGroupe'parameter. I would like to add a case where if the call has NOStoreGroupe parameter, the sproc should LOOP thru all records in tableStoreGroupeTable, read the column StoreCode, and pass that value as aparam to the other sprocs, as in:CREATE PROCEDURE MySproc(@StoreGroupe nvarchar(6) = NULL)ASif (@StoreGroupe is not null)BeginExec _Sproc1 @StoreGroupeExec _Sproc2 @StoreGroupeExec _Sproc3 @StoreGroupeExec _Sproc4 @StoreGroupe...............EndElseBeginA 'Group Code' has NOT been specifiedI want to take all the StoreGroups in tableStoreGroupeTable, in turn.I would like to do SOMETHING LIKE THIS:Do While not [StoreGroupeTable].EOFRead [Code] from [StoreGroupeTable]Set @StoreGroupe = The value I just readExec _Sproc1 @StoreGroupeExec _Sproc2 @StoreGroupeExec _Sproc3 @StoreGroupeExec _Sproc4 @StoreGroupe...............LoopEndGOIs that feasible in a sproc, or do I have to do this in the client(ADO) ?Thanks a lot.Alex.
Hullo folks, I'm having what I assume is a fairly mundane security issue.
I have a SQL login that I am trying to restrict as much as possible. This account's sole goal in life is to hit the server, return some usage statistics, then truncate the table it received the statistics from. I would like to refrain from granting this login permissions on the physical target table if possible.
Usually I can wrap up "protected" operations in a stored procedure, then grant exec permissions for my user and I'm good to go. However, TRUNCATE TABLE gets cranky with me when I attempt the above method. I suspect that has to do with the fact that TRUNCATE TABLE is effectively modifying the table itself as opposed to merely deleting data.
Is it possible to grant this login ONLY execute permission on a stored proc that TRUNCATE's tables without giving the user any physical permissions? Am I going about this the wrong way?
I'm trying to capture the value returned from sprocs. I stored the sproc name in the table and use cursor to run each sproc. Now the question is how can I capture and store the return value in a variable?
Here is the scenario:
Table1 has 1 column varchar(50) called vchsprocname count_A -- procedure, select count(*) from ... count_B -- procedure, select count(*) from ... count_C -- procedure, select count(*) from ...
here is my query: ---------------------------------------------------- DECLARE @vchsprocname varchar(50) DECLARE @count int
DECLARE cur CURSOR FOR SELECT vchsprocname from table1
OPEN cur FETCH NEXT FROM cur into @vchsprocname
WHILE @@FETCH_STATUS = 0 BEGIN
exec @count = @vchsprocname -- I know I cannot do this, the vchsprocname cannot be variable. What else can I do?
i am writing a sproc that calls another sproc. this 2nd sproc returns 3 or 4 rows. i want to be able to insert these rows into a table. this sproc is inside a cursor, as i have to call it many times.
how do i insert the rows that it returns into another table??
I am writing a stored procedure which updates a table, but when I run the stored procedure using a login that I have granted execute privileges on, then I get a message that I cannot run an update on the table. This would happen in dynamic sql... while my SQL has parameter references, I don't think it is considered dynamic SQL?
sproc: CREATE PROCEDURE [schemaname].[SetUserCulture] @UserID int , @Culture nvarchar(10) AS UPDATE dbo.SecUser SET Culture = @Culture WHERE UserID = @UserID
Loop through #Temp_1 -Execute Sproc_ABC passing in #Temp_1.Field_TUV as parameter -Store result set of Sproc_ABC into #Temp_2 -Update #Temp_1 SET #Temp_1.Field_XYZ= #Temp_2.Field_XYZ End Loop
It appears scary from a performance standpoint, but I'm not sure there's a way around it. I have little experience with loops and cursors in SQL. What would such code look like? And is there a preferable way (assuming I have to call Sproc_ABC using Field_TUV to get the new value for Field_XYZ?
I have attached the results of checking an Update sproc in the Sql database, within VSS, for a misbehaving SqlDataSource control in an asp.net web application, that keeps telling me that I have too many aurguments in my sproc compared to what's defined for parameters in my SQLdatasource control..... No rows affected. (0 row(s) returned) No rows affected. (0 row(s) returned) Running [dbo].[sp_UPD_MESample_ACT_Formdata] ( @ME_Rev_Nbr = 570858 , @A1 = No , @A2 = No , @A5 = NA , @A6 = NA , @A7 = NA , @SectionA_Comments = none , @B1 = No , @B2 = Yes , @B3 = NA , @B4 = NA , @B5 = Yes , @B6 = No , @B7 = Yes , @SectionB_Comments = none , @EI_1 = N/A , @EI_2 = N/A , @UI_1 = N/A , @UI_2 = N/A , @HH_1 = N/A , @HH_2 = N/A , @SHEL_1 = 363-030 , @SHEL_2 = N/A , @SUA_1 = N/A, @SUA_2 = N/A , @Cert_Period = 10/1/06 - 12/31/06 , @CR_Rev_Completed = Y ).
No rows affected. (0 row(s) returned) @RETURN_VALUE = 0 Finished running [dbo].[sp_UPD_MESample_ACT_Formdata]. The program 'SQL Debugger: T-SQL' has exited with code 0 (0x0). And yet every time I try to update the record in the formview online... I get Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. I have gone through the page code with a fine tooth comb as well as the sproc itself. I have tried everything I can think of, including creating a new page and resetting the fields, in case something got broken that I can't see. Does anyone have any tips or tricks or info that might help me?
Why don't you folks (SQL SERVER Management Studio Team or SQL SERVER Database Engine Team) provide an option by using which I would be in a position to know what all the other objects are depended on a selected object and vice versa. That means:
When I select a Table within the SQL SERVER Management Studio if there is an option for understanding "Which all the objects (tables or views) it is depended on (I mean Foreign key and etc... kind of relations) and also Which all the objects (Tables, Views, Stored Procedures and etc...) are using this table", It would be of great help for all developers.
Hi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
I'm sorta new with using stored procedures and I'm at a loss of how to achieve my desired result.
What I am trying to do is retrieve a value from a table before it is updated and then use this original value to update another table. If I execute the first called sproc in query analyzer it does return the value I'm looking for, but I'm not really sure how to capture the returned value. Also, is there a more direct way to do this?
Thanks, Peggy
Sproc that is called from ASP.NET:
ALTER PROCEDURE BP_UpdateLedgerEntry ( @EntryLogID int, @ProjectID int, @NewCategoryID int, @Expended decimal(10,2) ) AS DECLARE@OldCategoryID int
********************************************* BP_GetLedgerCategory ********************************************* ALTER PROCEDURE BP_GetLedgerCategory ( @EntryLogID int ) AS
SELECT CategoryID FROM BP_EntryLog WHERE EntryLogID = @EntryLogID
RETURN
********************************************* BP_UpdateCategories ********************************************* ALTER PROCEDURE BP_UpdateCategories ( @ProjectID int, @NewCategoryID int, @Expended decimal(10,2), @OldCategoryID int ) AS
UPDATE BP_Categories SET CatExpended = CatExpended + @Expended WHERE ProjectID = @ProjectID AND CategoryID = @NewCategoryID
UPDATE BP_Categories SET CatExpended = CatExpended - @Expended WHERE ProjectID = @ProjectID AND CategoryID = @OldCategoryID
create procedure dbo.GetZipID( @City varchar(30), @State char(2), @Zip5 char(6)) as DECLARE @CityID integer declare @StateID integer declare @ZipID integer set @ZipID=2 set @Zip5=lTrim(@Zip5) if @Zip5<>'' SET @ZIPID = (select Min(lngZipCodeID) AS ZipID from ZipCodes where strZipCode=@Zip5) if @ZipID is null set @CityID= EXEC GetCityID(@City); set @StateID= EXEC GetStateID(@State); insert into ZipCodes(strZipCode,lngStateID,lngCityID) values(@Zip5,@StateID,@CityID) if @@ERROR = 0 SET @ZIPID = @@Identity select @ZIPID
GetCityID and GetStateID are two stored procs, how do I execute those two stored procs in the above stored proc? I mean what is the syntax??
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
I have a table where table row gets updated multiple times(each column will be filled) based on telephone call in data.
Initially, I have implemented after insert trigger on ROW level thinking that the whole row is inserted into table will all column values at a time. But the issue is all columns are values are not filled at once, but observed that while telephone call in data, there are multiple updates to the row (i.e multiple updates in the sense - column data in row is updated step by step),
I thought to implement after update trigger , but when it comes to the performance will be decreased for each and every hit while row update.
I need to implement after update trigger that should be fired on column level instead of Row level to improve the performance?
I'm looking for a query that can "batch" update one table from another. For example, say there are fields on both tables like this: KeyField Value1 Value2 Value3 The two tables will match on "KeyField". I would like to write one SQL query that will update the "Value" fields in Table1 with the data from Table2 when there is a match.
I have an update trigger which fires from a transactiion table to update a parent record in another table. I am getting no errors, but also no update. Any help appreciated (see script below)
create trigger tr_cmsUpdt_meds on dbo.medisp for UPDATE as
if update(pstat) begin update med set REC_FLAG = 2 from deleted dt where med.uniq_id = dt.uniq_id and dt.pstat = 2 and dt.spec_flag = 'kop' end
I imported a SQL Table into SQL DataBase, But I can not update this table even with SQL Server management Studio When I change any data on mentioned table above, Red exclamation sign appears left of the record . How can I correct this problem? Thanks.
