Hi Friends
When i open the DTS packages in the Management Studio for editing the DTS packages
I get an error prompt asking me for Installing the Sql Server 2000 Designer Components. I already have the Sql Server 2000 Client tools installed in my machine. Should i still install the designer components...Wont there be a crash in the Client tools side???
cheers
Vic
http://vicdba.blogspot.com
We have purchased a new Development SQL Server that is running SQL Server 2005. Our existing Development SQL Server is running SQL 2000.
How can I move the DTS packages from the SQL 2000 server to the new SQL 2005 server? I will be upgrading them to SSIS at some point, but don't have the time now.
thanks
Hello All,
I am working on a migration project of my database(lets name it DB1), from SQL 2000 to SQL 2005. I have some DTS packages in my SQL 2000 database which also needs to be migrated to SSIS. These DTS packages currently interacts with other database(lets name it DB2) which is also in SQL 2000 and which does the data transmission. The real issue is that the other database(DB2) also has some DTS packages which also communicates with DB1 (the db to be upgraded) and so when i migrate my DB1 to SQL 2005, i will have to change my DB2 packages also (although the change will be minor). Now considering that in future I might also migrate my DB2 to SQL 2005 I wanted to know what will be the right approach to follow. One is to modify the DTS packages of DB2 to accmodate the change in connection and the other is to migrate the DTS packages of DB2 also to SSIS.
Can anyone help me with this one.
Thanks in Advance
Mitesh
I have been tasked with upgrading around 150 SQL Server 2000 DTS packages to SSIS in SQL Server 2005 standard edition. I made a backup of the 2000 database upon which the DTS packages operate and restored it to the SQL 2005 server. So far, so good. I have the database in place. Now I need to get the DTS packages themselves into the SLQ 2005 server. I think I need to check my install and make sure that I have the SQL Server 2000 DTS services installed on the SQL 2005 server. I can do that.
However, I wonder what would be the most effective way to physically get the packages from the SQL 2000 server to the SQL 2005 server. Should I use structured storage files? If so, how do I go about opening them in SQL 2005 in order to save them to SQL server 2005?
I should mention that these packages make heavy use of ActiveX scripting so I am looking at rewriting them from scratch to be SSIS packages. I just need the packages on the SQL Server 2005 box so I can make sure I am creating exactly the same functionality in 2005 as existed in SQL server 2000. Each DTS 2000 individual package tends to be fairly simple and I think I can greatly improve the process by consolidating them.
Thanks in advance for any advice.
S. Wells
Hi,
I have many sql 2000 DTS packages that I support from my development workstation running v2000 sp4. Packages are altered on the development machine and then go through a normal release mechanisms to production via testing servers etc.
I have recently installed the client tools for SQL Server 2005 on my desktop to evaluate the product. The 2005 DB instance is running on a seperate server.
So, I have dev edition of sql 2000 and 2005 client tools (including BI Dev studio etc) on my workstation.
I have recently had to make changes to a 2000 DTS package and used my 2000 enterprise manager to do so. No Problem- saved and tested fine on my workstation.
But when I try and release it to another server, or open the package using enterprise manager from another machine that does not have sql 2005 installed - I get an error message 'Unspecified error'. This I've seen before when trying to open packages created in v2000 , using v7 or where the service packs are different between machines.
Digging around my workstation and comparing some of the DLLs I know to be required to distribute DTS packages (from RDIST.txt) it seems that some of the SQL 2000 dll files have been updated by my 2005 installation.
E.g
DTSFFILE.DLL on my machine is 2000.85.1054.0 whilst on any 'clean' 2000 machine is at version v2000.80.760.0
Surely it cant be right that SQL 2005 has newer versions of components for SQL 2000 than is available with the latest SP for the actual product! Especially considering that the installation of 2005 does not even allow you to edit 2000 DTS packages through the management studio without a 'special' download' of the feature pack,(whihc by the way does not work very well either)
So am I to conclude that you can not run side by side installations of SQL 2000 and 2005 on a single machine and expect 2000 to run as it did previously
We are converted our DTS 2000 packages to Sql Server 2005 SSIS. I am getting following error on my ActiveX script that got converted. I am new to SSIS and DTS. Never ever worked with ActiveX also. So any help would be appreciated. Following is the script followed by error I get:
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main()
Dim oPkg
SET oPkg = DTSGlobalVariables.Parent
SET stpBeginJob = oPkg.Steps("DTSStep_DTSActiveScriptTask_1")
SET stpFinishedJob = oPkg.Steps("DTSStep_DTSActiveScriptTask_3")
IF DTSGlobalVariables("Count").Value > 0 THEN
stpFinishedJob.DisableStep = True
stpBeginJob.ExecutionStatus = DTSStepExecStat_Waiting
ELSE
stpFinishedJob.DisableStep = False
stpFinishedJob.ExecutionStatus = DTSStepExecStat_Waiting
END IF
Main = DTSTaskExecResult_Success
End Function
Error I get Is:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x000A39BC.
Thank You
Below is a migration plan that I've compiled to migrate SQL 2000 DTS packages to SSIS 2005. Once these DTS packages have been migrated i will need to create a job and schedule them in SQL 2005.
I would appreciate and feedback or questions on this migration plan.
Migration DTS 2000 packages to SSIS 2005:
1. Will need to save the current production DTS package as structure storage file. We do not have a UDL file. We set the data connections within each DTS package.
2. Go to Sql 2005 - ManagementLegacyData Transformation Services - right-click and open previous saved structure storage file.
3. Modify the DTS data creditentials to reflect the SQL 2005 connection data. Modify any SQL 2000 MAPI settings to utilize SQL 2005 new database mail. Save the package on SQL 2005.
4. After the modified DTS package has been updated and saved on SQL 2005, save this file as a structure storage file.
5. go to BIDS. Create a new SSIS project. Right-click on SSIS packages and select Migrate DTS 2000 package. This will migrate over the DTS 2000 package with the updated SQL 2005 data creditentails.
6. click on the package properties - protectionlevel and change it to dontsavesensitive.
7. right-click and select package configurations..., select to store data creditentials in xml format.
8. right-click on execute DTS 2000 package task, select Edit... and click on Load DTS2000 package internally. This will embed this task into the new SSIS package. Test the package. Continue if successful.
9. Use SSIS deployment functionality to move the package over to SQL 2005 Integration Services. Right-click on package and select Run Package, if successful, create a job and schedule it to run on SQL 2005 Agent.
10. When creating the Job under SQL Agent, change the Owner: of the job to reflect the owner of the new SSIS package. Schedule the job.
I've just coming up to speed on SSIS 2005. Therefore, this is what i've been able to piece together up to this point and I'm looking for some industry advice/feedback on whether or not this is a good migration plan. I need to provide a migration plan to management by 2/18. Thanks
Hi Experts
I am trying to schedule a legacy DTS 2000 package in 64 bit Sql Server 2005.
I cannot use the DTSRun tool on the Command prompt of the Sql 2005. What about dtexec ?Can i run Sql Server 2000 DTS packages from the Command Prompt.
Is DTS 2000 the only way to do that?
Any Advise is greatly appreciated
Vic.
I know my problem is not directly associated w/ SSIS, so please forgive the post here. I figured this would be the "most" appropriate place to post this challenge.
We're attempting to edit a 2000 DTS package in Design mode from within the 2005 SQL Management Studio. To do this we downloaded/installed the following packages from the MS download site:
Microsoft SQL Server 2000 DTS Designer Components
Microsoft SQL Server 2005 Backward Compatibility Components
We're able to open the package in design mode from the Management Studio (Server > Management > Legacy > Data Transformation Services > DTS Package Name). But, when the DTS designer is open, the backspace and arrow keys won't respond in the Management Studio. They begin responding when we close the DTS designer. There are no error messages when we close the DTS designer.
Does anyone know of a fix or a workaround? Any help would be greatly appreciated.
Thanks, Mike
Greetings,
I migrated some DTS 2000 packages to SSIS 2005 and I'm now editing them in Visual Studio. Some transformations got wrapped in a Execute DTS 2000 Package Task so I need to edit them (to see what's in); I have installed SQL Server 2000 DTS Designer Components (version 9.00.3042.00) but whenever double-click the task and press "Edit Package" I get the following error:
SQL Server 2000 DTS Designer components are required to edit DTS packages. Install the special Web download, "SQL Server 2000 DTS Designer Components" to use this feature. (Microsoft Visual Studio)
Do I need to install anything else? I'm using SQL Server 2005 SP2 (Full Install + Backwards Compatibility components) and I've tried reinstalling the DTS Designer Components without any success
Thanks in advance
I need help,
I've got 51 pretty complex Dts packages that are running on Sql 2000. I'm
trying to make them run on Sql 2005 without at first migrating them with the
migration wizard, since i know that many of them cannot be migrated.
I'm using the "Execute DTS 2000 Package Task Editor" to make them run in an
SSIS package, some of them are running fine, but many of them, especially
those with a "Data Driven Query Task" are returning this error:
Error: System.Runtime.InteropServices.COMException (0x80040427): Execution
was canceled by user. at DTS.PackageClass.Execute() at
Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
After many research on the web, i've reinstalled the Sql 2000 tools on the
Sql 2005 server, but i'm still receiving the same error. Also, i've tried to
repair the "Microsoft Sql Server 2005 backward compatibility" in the
Add/remove program of the Sql 2005 server without much success.
For your info, i've installed the hotfix Build 2153 on both the server and
the client and i'm still having the same problem......
Any idea?
Thanks.
I have to build a simple Windows Forms application that imports data for review and then exports it into a different format. I've created DTS packages in SQL 2000 for the import and the export.
What is the recommended way to execute the packages using buttons on a Windows form?
I have a SQL Server 7.0 backend server but I am using SQL Server 2000 EM to create DTS packages. Can the DTS packages be opened in SQL Server 7.0? We are contemplating the install of SQL 2000 but we are worried that any new DTS packages created won't work when opened on a SQL Server 7.0 server or that the SQL 2000 DTS functionality is just not compatibile with SQL Server 7.0 and will cause problems.
Any ideas out there?
Val
Hello,
I want to move a db from a SQL server 7 to SQL Server 2K. I'll do a backup and restore function to move the database, but how do I handle the objects mentioned in the header ?
Bothe servers (old and new) will have the same name, as well as the DB
All help is appreciated !
Thanks
Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting services and analysis services. We do not want to disturb the existing sql 2000 setup.
If we do that then what will happen to my earlier sql 2000 reporting service? Will it be upgraded to sql 2005 reporting service? I heard that reporting services are instance unaware application. Where will be the default reporting service database available?
Please help us.
Regards,
Sankar N
Would someone help me how to Move existing Meta Data Services packages to SQL Server storage (in the msdb database) or to structured storage files before you upgrade from SQL Server 2000 to SQL Server 2005? This is a before action recommendation by Upgrade Advisor.
View 1 Replies View RelatedCan a SSIS server, i.e. staging server be used to create packages that update SQL Server 2000 Analysis services objects on another server running SQL server 2000 OLAP?
It appears that the OLAP connection manager ion SSIS supports only connections (and thus updates) to 2005 OLAP objects. I work for a company that has a huge investment in a 3rd party DW that uses Analysis Services 2000. the DW tool vendor will not support an upgrade to SSAS 2005. We wish to extend the DW from other data sources. My thought was to use a staging server with SSIS, used solely as the ETL tool for all new development (thus no more DTS development), and to update the sql server 2000 operational data store on another box.
I can find no documentation on how to process sql server 2000 analysis services objects from within an SSIS package. Any ideas?
This is more of a philosophical post, but feedbacks are welcome!
I am working at migrating SQL 2000 DTS packages that pulls data from MAS90 via ODBC connections.
At first, I REALLY tried to learn SSIS and I hated it at first, with all the new things one has to do to get a simple import to work. After a while, I begin to appreciate some of the new design and the more tiered approach. Indeed, I tried to use SSIS to import the tables and even learned how to overcome the Unicode/non-Unicode conversion errors by using the Import Wizard to do the grunt work.
But today I came across a show stopper: My imports are failing because the source lied about its metadata type and I am getting a "Value too large for output column" error. I tried to recreate the Task to no avail. I searched on the web and there are very few posts regarding to this and unfortunately I don't have a way to tweak my ODBC connection properties for MAS90 to some how "fool" SSIS. I finally give up and migrate the DTS 2000 package instead.
I am not too happy about this solution because I know that more likely or not Microsoft will discontinue support for such legacy approach and then it is more work down the road. I REALLY wanted to do it right, to rebuild it natively in SSIS but why does SSIS have to make things so hard by enforcing the type checks so tightly? Is it so bad to allow users who know the data better to by pass the validations? We are not working in a perfect Comp Sci 101 world where every thing is scrubbed clean, we work in a world of bad, old, malformed data.
If there is a way for me to overcome that "value too large" error, I am all ears.
Thank you for reading.
Folks:
I have successfully upgraded my SQL Server 2000 Databases SQL 2005. After the successful upgrade I also migrated all of my SQL 2000 DTS packages using SQL Management Studio -> Management -> Legacy. I can see all these DTS packages and I can also run these.
How can I OPEN these DTS Packages in SSIS (Business Intelligence) for me to make the changes? I am not able to open them and also not able to see them File->open. All these DTS packages are stored in MSDB database.
Thanks !
How do you tranfer data between two SQL Server 2005 databases???? I swear I looked all over the place, but I don't see how it is done in SQL Server 2005.
View 4 Replies View RelatedOn my local desktop, I can create and run ssis packages, when I try to do the same thing on server I get he following error right clicking on running packages or stored packages.
failed to retrieve data for this request. Library not Registered. (exception from HRESULT: 0x8002801D
there are 2 instances of SQL on this server. Both are named with one being use by SQLExpress and the other by SQL2005 Std
Hi all
I would like to select transforms in a package and paste them as jpeg or similar into word or powerpoint in order to allow me to create a separate set of documentation.
However, whenever I copy some transformations and jump to word, the copy buffer is empty.
Any suggestions?
Thanks
I'm still getting used to SSIS and I'm wondering how to deploy all 20 of my ssis packages to my sql server 2005 machine in the msdb?
I could open each one and then save a copy as, but by default it doesn't put the name of the package in so I must copy and paste.
thanks.
My packages are migrated over our new 2005 server. How do I schedule/run them? BOL seems to suggest that we replace the dtsrun commands with the dtexec one. Am I on the right track?
View 6 Replies View RelatedI have created and run SSIS packages from my workstation that are successful. When I Build and then Deploy the same package to the server and schedule it, it fails. I am using SQL authentication connecting from a SQL 2000 database to a SQL 2005 database via OLE DB connections.
The following is the exported result of the package...
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
05/09/2007 15:46:05,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by User JDEREP. The last step to run was step 1 (step1).,00:00:01,0,0,,,,0
05/09/2007 15:46:05,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:46:06.38 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:46:06.38 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:46:06.38 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:46:05 PM Finished: 3:46:06 PM Elapsed: 0.75 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0
05/09/2007 15:30:00,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by Schedule 29 (AMS_EnterpriseWarehouse). The last step to run was step 1 (step1).,00:00:01,0,0,,,,0
05/09/2007 15:30:00,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:30:01.15 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:30:01.15 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:30:01.15 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:30:00 PM Finished: 3:30:01 PM Elapsed: 0.734 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0
05/09/2007 15:20:00,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by Schedule 29 (AMS_EnterpriseWarehouse). The last step to run was step 1 (step1).,00:00:01,0,0,,,,0
05/09/2007 15:20:00,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:20:01.55 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:20:01.55 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:20:01.55 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:20:00 PM Finished: 3:20:01 PM Elapsed: 0.703 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0
05/09/2007 15:18:00,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by Schedule 29 (AMS_EnterpriseWarehouse). The last step to run was step 1 (step1).,00:00:01,0,0,,,,0
05/09/2007 15:18:00,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:18:01.53 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:18:01.53 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:18:01.53 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:18:00 PM Finished: 3:18:01 PM Elapsed: 0.766 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0
Any help would be greatly appreciated...
Jim
Additionally, when I run this from the command line, I get the following
DTSER_FAILURE (1)
Jim
I am working on a project that has hundreds of DTS packages in use. The company plans to convert the database engine to SQL Server 2005 next month. We do not have time to convert all of the DTS packages to SSIS.
Is there a problem with having the DTS packages connect to SQL Server 2005 databases rather than SQL Server 2000.
Are there any known issues I should be aware of?
----------------------
MS Win XP Pro 2002 SP2
MS SQL Server 2005
MS Visual Studio 2005
----------------------
Can anyone help me (even by pointing me to a documentation) in order to schedule Packages (from file system source) in SQL Server 2005.
I've configured providers logging, but still the error file doesn't give me any explanation why the error happens:
"#Fields: event,computer,operator,source,sourceid,executionid,starttime,endtime,datacode,databytes,message
OnPreValidate,PC1234,NT AUTHORITYSYSTEM,D_AGR,{8A4FA774-F5F0-40DE-AB16-A93F27950E09},{8A918844-8E43-403D-A606-C8CB4B7D8238},31/08/2006 16:42:55,31/08/2006 16:42:55,0,0x,(null)"
I've also done the same on the Step properties under 'Logging'
In Management Studio I've added my login name and I'm the only user using the machine and I manage both Visual Studio and Management Studio
The error coming up on the job history is as follow: "Executed as user: PC1234SYSTEM. The package execution failed. The step failed." "The job failed. The Job was invoked by User UK1USER123. The last step to run was step 1 (step1)."
By the way the package (.dtsx) runs fine in BI Visual Studio)
Thank you very much.
Case one - upgrade from SQL 2000 to SQL 2005 in the same box
(actually it is a copy of the test box being upgraded)
Case two - install fresh SQL 2005 in a different box
Results for running (dts packages migrated to dtsx) in SSIS from a job
Note all other jobs in (Case one) using the old DTSRUN works fine, but new jobs trying to run migrated packages fail. Migrating this new package to (Case two) runs. How do I troubleshoot this? The process exit code was -532459699.
Is this exit code something that can be looked up?
Case one
Date 4/17/2007 2:51:49 PM
Log Job History (TEST SSIS5)
Step ID 1
Server USXXXX4O
Job Name TEST SSIS5
Step Name SSIS5
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: xxxx. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:51:49 PM. The return value was unknown. The process exit code was -532459699. The step failed.
Case two
Date 4/17/2007 2:34:07 PM
Log Job History (TEST SSIS5)
Step ID 1
Server USXXXX4
Job Name TEST SSIS5
Step Name SSIS5
Duration 00:00:07
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: xxxx. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:34:07 PM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 2:34:07 PM Finished: 2:34:14 PM Elapsed: 6.328 seconds. The package executed successfully. The step succeeded.
Hi,
I am unclear on Microsofts policy regarding support for DTS and packages that have been imported (but not migrated) to SQL 2005.
The upgrade advisor states
SQL Server 2000 Data Transformation Services
Advisory
SQL Server 2000 Data Transformation Services is deprecated You must completely migrate existing SQL Server 2000 Data Transformation Services (DTS) packages to SQL Server 2005 Integration Services packages before support is withdrawn.
Source Type: MSDB Package
What does this really mean? What will happen to the importing of legacy packages and this whole area within Management Studio? Will these 2005 features no longer be supported? What will happen to the Execute 2000 task? If I upgrade a SQL 2000 instance post 08/04/08 does this mean that I won't receive support from Microsoft even though the package post installation is in SQL 2005. Will the new dts designer in the feature pack be taken away/withdrawn?
To say DTS packages will no longer be supported is a very dramatic statement with far reaching consequences. How is this going to be effectively implemented? Is there really going to be no backward compatibility support in Katmai?
Cheers, James
Hi
Just a brief question,
is there a way of displaying a success or not success message when running (testing) an SSIS package on SQL 2005 ?
Because i have to go through the steps to see if there was an error or not and for large SSIS packages this is a pain.
With DTS 2000 after it ran you got a message saying successfull or not, is there a way to activate this in SQL 2005 ?
I suppose i could just run the job ... but I prefer the other way as sometimes a job fail is a permissions problem, not a SQL/datapump task problem...
I installed SP2 to one of our servers to see what we'd need to do for our Production systems. The server in question is used for a log shipped copy of production, SSRS, SSIS and general duty stuff. I got errors in two areas during the installation -- 1 dealing with SSNS (don't use it yet on that server) and the second being the Client product.
After a reboot I went into a Business Studio solution I've been working on (and using) for several months. None of my packages are working--each having the following problem:
Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSContainer90'.
This operation failed because the QueryInterface call on the COM component for the interface with IID '{8BDFE892-E9D8-4D23-9739-DA807BCDC2AC}'
failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED))..
It seems to be in the designer as it is unable to display the the graphical version but it does let me switch to the code view.
What is the easiest way to troubleshoot and/or fix this?
Hai,
I am working on the DTS Package in SQL Server 2005 , actaully the DTA Packages Use OutLook to Send the email to the Mailing List , now that Out Look Stuff is not working Fine , soo I came to know that we can use Sp_send_dbMail stored Procedure insteds of Outlook , i am trying to do that my Email contains the attaachment to the Text file from the shared Folder.
I am not Getting the Correct Help when i am trying .
So can some one Helpe Providind Some examples and suggetions .
Thanks
I need to deploy some SSIS packages onto a remote Integration Server machine. Hence
I wrote a VS 2005 Setup with Custom Action (C# Installer class) which uses the
SSIS DTSX Dlls to deploy the Packages onto an Integration Server. I am shipping
all the necessary DLLs in the MSI itself, so that the MSI can run on any client
machine having just .NET 2.0 Framework installed.
When I run the Setup on a Machine having Integration Server, the Setup works
fine and the Packages are deployed.
However, if I try to run the MSI on a machine which just has the .NET 2.0
Framework installed, I get the following error.
SqlServer.DTS.Runtime.Application could not be created. Retrieving the COM
class factory for component with CLSID
{E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error.
80040154
I am not sure whether any of the DLLS are COM components. I believe all are
Managed DLLs.I believe SSIS 2005 looks like a pre-requisite but I don't need that.
Please help. I am posting this query here, as I believe ppl writing SSIS Packages may have faced this issue.