Sql 2005 - SA Gives Different Results From Sproc - Please Help
Mar 9, 2007
I open two instances Sql 2005 Server Management Studio.
Instant 1 - Logon as SA
Instant 2 - Logon with User Id and Password
I have a sproc that executes a complex view (composit view that makes use of other views).
The spoc returns different results depending if it's run from SA or my User account.
I guess this is a permissions problem.
The question is ....... How do I find out which view, table, function etc. is causing the problem.
Is there a trace facility in Sql2005 Server Management Studio?
Any help appreciated.
Regards,
Paul.
View 3 Replies
ADVERTISEMENT
May 9, 2005
I have a sproc in my database that when editing in VS 2003 shows different results.
The sproc code is:
ALTER PROCEDURE dbo.VMUsage_GetRaw
@VMBox nvarchar,@StartDate datetime,@EndDate datetime
AS
SET NOCOUNT ON
SELECT *FROM VMRawUsageWHERE (ACCOUNT = @VMBox) AND (CONVERT(datetime, DATE + ' ' + TIME) > @StartDate) AND (CONVERT(datetime, DATE + ' ' + TIME) < @EndDate)
When I open the SQL statement in the designer and run (and enter my parameters) I get a recordset returned, but when I just "Run Stored Procedure" and enter the same parameters I get no results. The same occurs when I run the sproc from my website (no results).
Any ideas what is happening between the two?
View 1 Replies
View Related
Aug 9, 2006
Could someone please tell me why the following SELECT statement...
SELECT ID, SpecimenNr, ScientificName, Locality, TaxonFROM petrander.QueryViewWHERE (InstitutionCode = 1) AND (Collectioncode = 1) AND (ScientificName LIKE N'%le%') AND (Locality LIKE N'%Fakse%') AND (22 IN (ParentID1, ParentID2, ParentID3, ParentID4, ParentID5, ParentID6, ParentID7, ParentID8))
...gives me 9 rows back, but embedding the exact same statement in the following sproc...
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [petrander].[DynamicQuery] @taxparent int = NULL, @museum int = NULL, @collection int = NULL, @binomen Nvarchar(254) = NULL, @locality Nvarchar(254) = NULLAS SELECT ID, SpecimenNr, ScientificName, Locality, Taxon FROM QueryView WHERE InstitutionCode = COALESCE(@museum, InstitutionCode) AND CollectionCode = COALESCE(@collection, CollectionCode) AND ScientificName LIKE 'N%' + @binomen + '%' AND Locality LIKE 'N%' + @locality + '%' AND (@taxparent IN (ParentID1, ParentID2, ParentID3, ParentID4, ParentID5, ParentID6, ParentID7, ParentID8))
...and passing the exact same parameter values to with the following execute statement...
USE [Geomusdb]
GO
DECLARE @return_value int
EXEC @return_value = [petrander].[DynamicQuery]
@museum = 1,
@collection = 1,
@binomen = N'le',
@locality = N'Fakse'
SELECT 'Return Value' = @return_value
GO
gives me 0 rows!? What is different!?
Any help is greatly appreciated...
View 4 Replies
View Related
Oct 1, 2007
Hello,
I am trying to validate a user via a stored procedure. This works OK until I try to validate the password, at which point the validation fails (even though the password is OK). Below is my sproc. If I comment out AND m.Password = @Password the sproc is OK. I am passing in the password as a string when testing the sproc. Any ideas? J.
ALTER Proc [dbo].[pru_VerifyApproveUser]
@UserName nvarchar(256),@Password nvarchar(128),@ApplicationName nvarchar(256)AS
BEGIN
IF EXISTS(Select * from dbo.aspnet_Membership WHERE Email = @UserName)BEGIN DECLARE @UserId uniqueidentifierSELECT @UserId = NULLSELECT @UserId = u.UserId
FROM dbo.aspnet_Membership m, dbo.aspnet_Users u, dbo.aspnet_Applications aWHERE LoweredUserName = LOWER(@UserName) ANDu.ApplicationId = a.ApplicationId AND LOWER(@ApplicationName) = a.LoweredApplicationName ANDu.UserId = m.UserId AND m.Password = @Password
-- If @Userid is Null - then the above credentials are not satisfied-- e.g. wrong password/username combo..
IF (@UserId IS NULL)
BEGIN
RETURN 2
END
Update dbo.aspnet_Membership
SET IsApproved = 1
WHERE Email = @UserName
RETURN 1
END
END
View 2 Replies
View Related
Apr 20, 2006
I have a stored procedure in my asp.net 2.0 app that will not run. I am using an sqlcommand object and executenonquery. At first I received an error "execute permission denied". I had already given the user on sql server read and write permissions. So -- since I was not passing the sql server userloginid or password in the connection string, I tried changing the connection string in my web.config to:
"data source=xxxSQL2005;initial catalog=AdventureWorks; User Id=myid;password=mypasswd"
now I get an error that the login has failed for user xxx. So I am wondering what I need to do to run stored procedure in a web app. I am using the full sql server version not express.
Thanks for any help on this.
smHaig
View 1 Replies
View Related
Feb 13, 2007
I have attached the results of checking an Update sproc in the Sql database, within VSS, for a misbehaving SqlDataSource control in an asp.net web application, that keeps telling me that I have too many aurguments in my sproc compared to what's defined for parameters in my SQLdatasource control.....
No rows affected.
(0 row(s) returned)
No rows affected.
(0 row(s) returned)
Running [dbo].[sp_UPD_MESample_ACT_Formdata]
( @ME_Rev_Nbr = 570858
, @A1 = No
, @A2 = No
, @A5 = NA
, @A6 = NA
, @A7 = NA
, @SectionA_Comments = none
, @B1 = No
, @B2 = Yes
, @B3 = NA
, @B4 = NA
, @B5 = Yes
, @B6 = No
, @B7 = Yes
, @SectionB_Comments = none
, @EI_1 = N/A
, @EI_2 = N/A
, @UI_1 = N/A
, @UI_2 = N/A
, @HH_1 = N/A
, @HH_2 = N/A
, @SHEL_1 = 363-030
, @SHEL_2 = N/A
, @SUA_1 = N/A, @SUA_2 = N/A
, @Cert_Period = 10/1/06 - 12/31/06
, @CR_Rev_Completed = Y ).
No rows affected.
(0 row(s) returned)
@RETURN_VALUE = 0
Finished running [dbo].[sp_UPD_MESample_ACT_Formdata].
The program 'SQL Debugger: T-SQL' has exited with code 0 (0x0).
And yet every time I try to update the record in the formview online... I get
Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I have gone through the page code with a fine tooth comb as well as the sproc itself. I have tried everything I can think of, including creating a new page and resetting the fields, in case something got broken that I can't see.
Does anyone have any tips or tricks or info that might help me?
Thanks,
SMA49
View 3 Replies
View Related
Apr 23, 2004
I'm sorta new with using stored procedures and I'm at a loss of how to achieve my desired result.
What I am trying to do is retrieve a value from a table before it is updated and then use this original value to update another table. If I execute the first called sproc in query analyzer it does return the value I'm looking for, but I'm not really sure how to capture the returned value. Also, is there a more direct way to do this?
Thanks,
Peggy
Sproc that is called from ASP.NET:
ALTER PROCEDURE BP_UpdateLedgerEntry
(
@EntryLogID int,
@ProjectID int,
@NewCategoryID int,
@Expended decimal(10,2)
)
AS
DECLARE@OldCategoryID int
EXEC @OldCategoryID = BP_GetLedgerCategory @EntryLogID
UPDATE
BP_EntryLog
SET
ProjectID = @ProjectID,
CategoryID = @NewCategoryID,
Expended = @Expended
WHERE
EntryLogID = @EntryLogID
EXEC BP_UpdateCategories @ProjectID, @NewCategoryID, @Expended, @OldCategoryID
Called Sprocs:
*********************************************
BP_GetLedgerCategory
*********************************************
ALTER PROCEDURE BP_GetLedgerCategory
(
@EntryLogID int
)
AS
SELECT CategoryID
FROM BP_EntryLog
WHERE EntryLogID = @EntryLogID
RETURN
*********************************************
BP_UpdateCategories
*********************************************
ALTER PROCEDURE BP_UpdateCategories
(
@ProjectID int,
@NewCategoryID int,
@Expended decimal(10,2),
@OldCategoryID int
)
AS
UPDATE
BP_Categories
SET CatExpended = CatExpended + @Expended
WHERE
ProjectID = @ProjectID
AND
CategoryID = @NewCategoryID
UPDATE
BP_Categories
SET CatExpended = CatExpended - @Expended
WHERE
ProjectID = @ProjectID
AND
CategoryID = @OldCategoryID
View 2 Replies
View Related
Jan 20, 2004
create procedure dbo.GetZipID( @City varchar(30), @State char(2), @Zip5 char(6))
as
DECLARE @CityID integer
declare @StateID integer
declare @ZipID integer
set @ZipID=2
set @Zip5=lTrim(@Zip5)
if @Zip5<>''
SET @ZIPID = (select Min(lngZipCodeID) AS ZipID from ZipCodes where strZipCode=@Zip5)
if @ZipID is null
set @CityID= EXEC GetCityID(@City);
set @StateID= EXEC GetStateID(@State);
insert into ZipCodes(strZipCode,lngStateID,lngCityID) values(@Zip5,@StateID,@CityID)
if @@ERROR = 0
SET @ZIPID = @@Identity
select @ZIPID
GetCityID and GetStateID are two stored procs, how do I execute those two stored procs
in the above stored proc? I mean what is the syntax??
Tks
View 2 Replies
View Related
May 29, 2006
lets say we have more than 100 000 rows in Table1, and we want to view each 10 rows alone.... and by pressing on a NEXT button we will see the other 10 pages....
there is 2 buttons : NEXT and PREVIOUS
so can anyone tell me how to do that in SQL 2005, and what is correctly called.
I have found a code that does use ROW_NUMBER in order to view results between 2 numbers,
example: rows between 10 and 50....
but It is not what I want, so please I need some help, thank you
By Uncle Sam
View 10 Replies
View Related
May 29, 2006
lets say we have more than 100 000 rows in Table1, and we want to view each 10 rows alone.... and by pressing on a NEXT button we will see the other 10 pages....
there is 2 buttons : NEXT and PREVIOUS
so can anyone tell me how to do that in SQL 2005, and what is correctly called.
I have found a code that does use ROW_NUMBER in order to view results between 2 numbers,
example: rows between 10 and 50....
but It is not what I want, so please I need some help, thank you
By Uncle Sam
View 4 Replies
View Related
Aug 13, 2006
In ORACLE 9i, I created the table test that show the tree structure of an organizaion with the following SQL statement:
CREATE TABLE TEST(
PARFOLDERNO NUMBER(8,0),
FOLDERNO NUMBER(8,0)
)
And select the data using the following SQL Statement:
SELECT PARFOLDERNO,FOLDERNO FROM TEST
The result is:
PARFOLDERNO FOLDERNO
0 2461
2461 2463
2461 2462
2462 2465
2462 2466
2463 2469
2463 2470
To show the subnodes of the root node 2461, the following SQL Statement is used:
SELECT PARFOLDERNO,FOLDERNO FROM TEST START WITH FOLDERNO=2461 CONNECT BY PRIOR FOLDERNO=PARFOLDERNO
the results:
PARFOLDERNO FOLDERNO
0 2461
2461 2463
2463 2469
2463 2470
2461 2462
2462 2465
2462 2466
I have created the table test with the same structure and the same data in SQL Server 2005. To show the subnodes of the root node 2461, the following SQL Statement is used:
WITH CTE_TEST(PARFOLDERNO,FOLDERNO)
AS
(
SELECT PARFOLDERNO,FOLDERNO FROM TEST WHERE FOLDERNO=2461
UNION ALL
SELECT TEST.PARFOLDERNO,TEST.FOLDERNO FROM TEST, CTE_TEST
WHERE TEST.PARFOLDERNO=CTE_TEST.FOLDERNO
)
SELECT PARFOLDERNO,FOLDERNO FROM CTE_TEST
PARFOLDERNO FOLDERNO
02461
24612463
24612462
24622465
24622466
24632469
24632470
The results are shown again in Oracle 9i and SQL Server 2005 as follwos:
Oracle 9i SQL Server 2005
PARFOLDERNO FOLDERNO PARFOLDERNO FOLDERNO
0 2461 0 2461
2461 2463 2461 2463
2463 2469 2461 2462
2463 2470 2462 2465
2461 2462 2462 2466
2462 2465 2463 2469
2462 2466 2463 2470
How can I get the result with the same sequence in SQL Server 2005?
Thanks!
View 11 Replies
View Related
Feb 8, 2007
Is there any way to have the results pane auto hide ? Im lazy and dont want to manually (ctl-R) hide each time i run something, then starting writing code again
View 1 Replies
View Related
Oct 12, 2007
easy question:
If I use "results to text" option when executing a query in Ms SQL Server Management Studio null value is inserted as 'NULL' string in the result. Is it possible to have blank ('') string instead of 'NULL' in the result in 2005 version.
It must be possible, but I could not find it in tools/options
thank you in advance
Andras
View 6 Replies
View Related
Apr 18, 2006
I'm seeing some change in behavior for a query in SQL Server 2005 (compared to behavior in SQL Server 2000). The query is as follows:
------------
create table #projects (projectid int) insert into #projects select projectid from tblprojects where istemplate = 0 and projecttemplateid = 365
Select distinct tblProjects.ProjectID
from tblProjects WITH (NOLOCK)
inner join #projects on #projects.projectid = tblprojects.projectid
Inner join tblMilestones WITH (NOLOCK) ON tblProjects.ProjectID = tblMilestones.ProjectID
and tblProjects.projectID in (
select projectid
from tblMilestones
where (parent = 683691 AND PrimaryDate between '4/15/2006' and '4/22/2006' )
and enabled = 1 )
------------
This is dynamic SQL generated by the application when a user requests a report with variable parameters. It works fine in SQL Server 2000. It outputs 47 records which is correct.
In SQL Server 2005, for some reason, the DISTINCT keyword is behaving as a TOP operator and outputs just 1 record. (Results of Showplan Text at the end of this post).
If I modify the query even the slightest bit by:
1) Changing "where (parent = 683691 AND PrimaryDate between '4/15/2006' and '4/22/2006' )
and enabled = 1 )"
To " where (parent = 683691 AND PrimaryDate between '4/15/2006' and '4/22/2006' ) )
and enabled = 1 "
2) Changing " Select distinct tblProjects.ProjectID"
To " Select distinct tblProjects.ProjectID+''"
3) Removing the Distinct keyword, storing into a Temp table, then performing a distinct on the temp table
4) Adding: OPTION (FORCE ORDER)
5) OR completely fixing the query (remove redundant loops, etc)
...it works fine (outputs 47 records). It also works if I created new tables (eg. tMilestones instead of tblMilestones) and inserted about 10 records into each and ran the query referencing these new tables.
I reindexed the tables, updated stats, updated usage, ran DBCC FREEPROCCACHE, changed MaxDOP settings...nothing makes the query behave the way it does in SQL Server 2000 without modifying the query/adding the query hint.
Have you come across this? Any ideas on what might be causing the "TOP" operation. (Somewhat resembles the bug mentioned in this article: http://www.kbalertz.com/Feedback_910392.aspx - but this was apparently fixed POST-SQL Server 2000 SP4 - so has it not made it into SQL Server 2005 yet?).
I will appreciate any new insights you might have on this issue.
Thanks much,
Smitha
P.S. Results of Showplan Text:
StmtText
------------------------------
SET STATISTICS PROFILE ON
(1 row(s) affected)
StmtText
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Select distinct tblProjects.ProjectID from tblProjects WITH (NOLOCK)
inner join #projects on #projects.projectid = tblprojects.projectid
Inner join tblMilestones WITH (NOLOCK) ON tblProjects.ProjectID = tblMilestones.ProjectID
and tblProjects.projectID in (
select tblMilestones.projectid from tblMilestones
where (parent = 683691 AND tblMilestones.PrimaryDate between '4/15/2006' and '4/22/2006' )
and tblMilestones.enabled = 1 )
(1 row(s) affected)
StmtText
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
|--Stream Aggregate(DEFINE:([ExpesiteProductionCopy].[dbo].[tblProjects].[ProjectID]=ANY([ExpesiteProductionCopy].[dbo].[tblProjects].[ProjectID])))
|--Nested Loops(Inner Join, OUTER REFERENCES:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]))
|--Nested Loops(Inner Join, OUTER REFERENCES:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]))
| |--Filter(WHERE:(CONVERT_IMPLICIT(tinyint,[ExpesiteProductionCopy].[dbo].[tblMilestones].[Enabled],0)=(1)))
| | |--Nested Loops(Inner Join, OUTER REFERENCES:([Uniq1014], [ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]) OPTIMIZED)
| | |--Merge Join(Inner Join, MERGE:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID], [Uniq1014])=([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID], [Uniq1014]), RESIDUAL:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID] = [ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID] AND [Uniq1014] = [Uniq1014]))
| | | |--Sort(ORDER BY:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID] ASC, [Uniq1014] ASC))
| | | | |--Index Seek(OBJECT:([ExpesiteProductionCopy].[dbo].[tblMilestones].[byPrimaryDate]), SEEK:([ExpesiteProductionCopy].[dbo].[tblMilestones].[PrimaryDate] >= '2006-04-15 00:00:00.000' AND [ExpesiteProductionCopy].[dbo].[tblMilestones].[PrimaryDate] <= '2006-04-22 00:00:00.000') ORDERED FORWARD)
| | | |--Index Seek(OBJECT:([ExpesiteProductionCopy].[dbo].[tblMilestones].[byParentID]), SEEK:([ExpesiteProductionCopy].[dbo].[tblMilestones].[Parent]=(683691)) ORDERED FORWARD)
| | |--Clustered Index Seek(OBJECT:([ExpesiteProductionCopy].[dbo].[tblMilestones].[projectid]), SEEK:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]=[ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID] AND [Uniq1014]=[Uniq1014]) LOOKUP ORDERED FORWARD)
| |--Index Seek(OBJECT:([ExpesiteProductionCopy].[dbo].[tblProjects].[PK_tblProjects_1]), SEEK:([ExpesiteProductionCopy].[dbo].[tblProjects].[ProjectID]=[ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]) ORDERED FORWARD)
|--Top(TOP EXPRESSION:((1)))
|--Nested Loops(Inner Join)
|--Table Scan(OBJECT:([tempdb].[dbo].[#projects]), WHERE:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]=[tempdb].[dbo].[#projects].[projectid]))
|--Clustered Index Seek(OBJECT:([ExpesiteProductionCopy].[dbo].[tblMilestones].[projectid]), SEEK:([ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]=[ExpesiteProductionCopy].[dbo].[tblMilestones].[ProjectID]) ORDERED FORWARD)
(15 row(s) affected)
StmtText
-----------------------------
SET STATISTICS PROFILE OFF
(1 row(s) affected)
View 6 Replies
View Related
Jan 19, 2007
I am looking for a simple example or guidance on how to move the results of a query from a mysql database to sql server 2005 using SSIS.
It seems rather difficult to do this or at least I am stuggling to figure it out. It was easy to do in DTS, how do you do it in SSIS?
View 3 Replies
View Related
May 10, 2006
Hello everybody,
I've got a little problem wich i'm trying to solve since 1-2 years and i hoped it would go away with SQL 2005 - but that wasn't the case :(.
Situation:
I've just bought a new Server containing:
SQL 2005
64 Bit Enviroment
4 GB RAM
2x AMD Opteron 2 GHz Prozeccors (Dual Core)
2x RAID Controllers (RAID 1) containing
1.1 System
1.2 Data
2.1 Transaction Logs
I've created a full-text table containing all the search terms i need to search.
Table build:
RecID - int - Primary Key
SrcID - varchar(30)
ArticleID - int - referring to an original table
SearchField - varchar(150) - Containing the search terms
timestamp - timestamp field
Fulltext index:
RecID as Primary Key
SearchField as indexed field - Wordbreaker: Neutral (containing several languages), Accent sensitivity off
Now i've got different tables imported in here resulting in a table size of ~ 13 million rows.
There is no problem with the performance on this catalog if i search a term wich isn't contained in more than 200-300 recordsets - but if i search for a term wich could occur in 200'000 upwards it gets extremely slow.
On the slow query the first records get in after no time, but until the query finished up to 60 seconds pass.
The problem is that i have to sort by a ranking value wich is stored externally - so i need all results to sort them...
current (debugging) query:
SELECT ArticleID FROM fullTextTable AS ft INNER JOIN CONTAINSTABLE(FullTextCatalog,SearchField,'"term*"') AS ftRes ON ftRes.[KEY]=ft.idEntry
Now if i check in the performance monitor:
As soon as i run the query the 'Avg. Disk Read Queue Length' counter on disk D (SQL Data Files) jumps to the top, until the query has finished.
Almost no read/write activity on C: where the Fulltext is stored...
If i rerun the query, after it finished once successfully - it takes place below 1-2 seconds, would be nice to get that result in first place :).
Does anybody know a workaround to this problem?
View 9 Replies
View Related
Aug 3, 2006
I have SQL Server 2005 Standard installed on a Windows XP SP2 PC. I tried to install the SP1 upgrade from http://www.microsoft.com/downloads/details.aspx?familyid=CB6C71EA-D649-47FF-9176-E7CAC58FD4BC&displaylang=en, which is listed as build 2047. I installed the upgrade and each upgraded component reported success, and I rebooted the PC. However, checking the version of my SQL Server as per KB321185 results in version 9.00.2040.00. There are errors at the end of the SQL9_Hotfix_KB913090_sqlrun_sql.msp.log log file as follows :
MSI (s) (54:A8) [15:57:42:059]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 1 for SQL Server Database Services 2005 ENU (KB913090)' installed successfully.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 1728
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Transforming table Error.
MSI (s) (54:A8) [15:57:42:059]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (54:A8) [15:57:42:059]: Product: Microsoft SQL Server 2005 -- Configuration completed successfully.
Attempting to reinstall SP1 resulted in the same errors. I need to fully upgrade to build 2047 so that I can install the cumulative hotfix build 2153. Does anyone have suggestions as to what causes this behavior?
Thanks,
Gary Thorne
HAL Systems
View 8 Replies
View Related
Jun 25, 2007
I am using snapshot replication to copy data from one database to another. I truncate the destination table first. The publisher and the subscriber are different databases on the same server. The data turns into 1 unrecognizable row.
Here is what the source table looks like:
displayTypeID, displayType
1, Title List Formats
2, Title Details
3, Title List Export
4, Pricing Notes
5, clone Mask 001
6, clone Mask 002
7, clone Mask 004
8, clone Mask 008
9, hide From Admin
10, not Common Attr
11, Insert Title
12, title Types
The resulting data looks like this:
DisplayType, displayTypeId
, 1660953600
I see no errors in replication and nothing in the source table looks like bad data that could cause such a malady. I see the problem on two different servers now and identified the source of the problem, the column order is reversed in the source and destination tables. The data types do not even match so I would at the very least expect an error from bcp.
View 2 Replies
View Related
Jan 21, 2008
I am using vs 2005 and sqlserver 2005 to manage a large database. I need to create a series of text files based on the value of one of the columns. Is there an sql command that will pipe the output directly to a file?
Thanks,
Mike
View 1 Replies
View Related
Feb 28, 2007
Hi all,
Hope this helps someone. My experience is that an interrupted install of SP2 screws things royally, despite signifying success.
My initial attempt at installing SQL Server 2005 SP2 (64-bit) on our dev server resulted in massive corruption of at least one SSIS solution. Without the option to uninstall the SP2, the prospect of a complete reinstall/recovery totally ruined my day.
When I loaded the SSIS solution, all packages returned the following connection based errors "connection manager will not acquire a connection because the package OffLineMode property is TRUE". OffLineMode property was in fact set to the default "False" for all packages. Individual tasks were broken also. I did not search all packages, but FTP and File System tasks were all corrupted. Nor could I successfully create these tasks in a new packages, even within a new solution.
During the install I recived the following error:
Error Log:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2153
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29506
Error Description : MSP Error: 29506 SQL Server Setup failed to modify security permissions on file D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData for user xxxxx. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.
The SP2 install continued and with the exception of database Services, all other components were installed successfully.
A very helpful person had posted this solution:
The problem is that there exists a file in this Data directory that the user running SP1 does not have permissions to modify. The workaround is to figure out which file this is (typically a user created DB or some backup program files) and to temporarily assign permission to that file(s). You can revert back to the intended permissions after running SP1.
Sure enough, there was a data and a log file with permission restricted to a single user. Granting permission to the account doing the install worked.
I ran the SP2 again and the database Services component "succeeded". In fact, as outlined, my SSIS packages were unusable.
I re-ran the SP2 install. No components were selected for update, so I manually rechecked each component and executed. This time the install completed successfully for all components, and much to my relief, SSIS functionality was restored.
Pretty scrappy install package IMHO. There are obviously dependencies between the different components being updated, but if these dependencies, and therefore integrity of the update, are broken, the installer nevertheless reports success.
Cheers, Jeremy
View 8 Replies
View Related
Feb 7, 2007
I have a complex view in my sql 2005 database.
The view returns a column that could be null (as the result of a left outer join).
The coulmn that is returned is an integer.
Everything works fine if I run the view from SQL 2005 Management Studio.
My column value is always null if I use ADO.NET's SqlAdapter to return a DataTable.
Has anybody seen this behaviour before?
Any help appreciated.
Regards,
Paul.
View 2 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Mar 25, 2015
I have four tables: Customer (CustomerId INT, CountyId INT), County (CountyId INT), Search(SearchId INT), and SearchCriteria (SearchCriteriaId INT, SearchId INT, CountyId INT, [others not related to this]).
I want to search Customer based off of the Search record, which could have multiple SearchCriteria records. However, if there aren't any SearchCriteria records with CountyId populated for a given Search, I want it to assume to get all Customer records, regardless of CountyId.
Right now, I'm doing it this way.
DECLARE @SearchId INT = 100
SELECT * FROM Customer WHERE
CountyId IN
(
SELECT CASE WHEN EXISTS(SELECT CountyId FROM SearchCriteria WHERE SearchId = @SearchId)
THEN SearchCriteria.CountyId
[Code] .....
This works; it just seems cludgy. Is there a more elegant way to do this?
View 4 Replies
View Related
Aug 7, 2007
We are getting unexpected results from the following update statement when it is executed on SQL Server 2005.
The strange thing is that we get duplicated values for QM_UID (although when run under SQL Server 2000 we don't get duplicated values)
Can anyone explain why this happens or suggest another way of populating this column without using a cursor or adding a temporary autoincrement column and copying the values over?
declare @NextID int;
set @NextID = 1;
update tmp set QM_UID=@NextID, @NextID = @NextID + 1;
select QM_UID, count(*) from tmp group by QM_UID having count(*) > 1 order by QM_UID
QM_UID count(*)
25 2
26 3
27 4
28 4
29 4
30 4
31 4
32 4
33 4
34 4
35 5
36 4
37 4
38 4
39 4
40 3
...
--- Script to replicate problem
-- NB: The number of rows that must be added to tmp before this problem will occur is machine dependant
-- 100000 rows is sufficient on one of our servers but another (faster) server doesn't show the error
-- at 100000 rows but does at 1000000 rows.
-- Create a table
CREATE TABLE tmp (
[QM_ADD_OP] [char](6) DEFAULT '' NOT NULL,
[QM_ADD_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_ADD_TIME] [int] DEFAULT -1 NOT NULL,
[QM_EDIT_OP] [char](6) DEFAULT '' NOT NULL,
[QM_EDIT_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_EDIT_TIME] [int] DEFAULT -1 NOT NULL,
[QM_LOCK_OP] [char](6) DEFAULT '' NOT NULL,
[QM_QUOTE_JOB] [smallint] DEFAULT 0 NOT NULL,
[QM_QUOTE_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_JOB_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_PRJ_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_NUMBER] [char](12) DEFAULT '' NOT NULL,
[QM_REV_NUM] [char](6) DEFAULT '' NOT NULL,
[QM_REV_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REV_TIME] [int] DEFAULT -1 NOT NULL,
[QM_REV_OPR] [char](6) DEFAULT '' NOT NULL,
[QM_STYLE_CODE] [char](4) DEFAULT '' NOT NULL,
[QM_REP_JOB_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_REP_COLUMN] [smallint] DEFAULT 0 NOT NULL,
[QM_REP_PART] [char](6) DEFAULT '' NOT NULL,
[QM_REP_MODEL] [smallint] DEFAULT 0 NOT NULL,
[QM_REP_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_MODEL_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_RUN_NUM] [int] DEFAULT 0 NOT NULL,
[QM_SOURCE_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_SOURCE_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_SOURCE_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_SOURCE_PART] [char](6) DEFAULT '' NOT NULL,
[QM_SOURCE_MODEL] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_ORIG_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_ORIG_PART] [char](6) DEFAULT '' NOT NULL,
[QM_COPY_JOB] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_COLUMN] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_J_PART] [char](6) DEFAULT '' NOT NULL,
[QM_COPY_QUOTE] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_VAR] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_QTY] [char](12) DEFAULT '' NOT NULL,
[QM_COPY_Q_PART] [char](6) DEFAULT '' NOT NULL,
[QM_JOINT_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_QUOTE_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_JOB_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_LIVE_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_USER_STATUS] [smallint] DEFAULT 0 NOT NULL,
[QM_DEL_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_IS_CONVERTED] [smallint] DEFAULT 0 NOT NULL,
[QM_PRINTED] [smallint] DEFAULT 0 NOT NULL,
[QM_COPY_RATES] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_UPDATE] [smallint] DEFAULT 0 NOT NULL,
[QM_CRED_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CRED_TIME] [int] DEFAULT -1 NOT NULL,
[QM_CRED_AMT] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_CRED_OP] [char](6) DEFAULT '' NOT NULL,
[QM_HELD] [smallint] DEFAULT 0 NOT NULL,
[QM_PROOF] [char](12) DEFAULT '' NOT NULL,
[QM_DELIV_METHOD] [char](12) DEFAULT '' NOT NULL,
[QM_ART_METHOD] [char](12) DEFAULT '' NOT NULL,
[QM_DES_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_REC_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REC_TIME] [int] DEFAULT -1 NOT NULL,
[QM_OWN_OP] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_RESP_TIME] [int] DEFAULT -1 NOT NULL,
[QM_RESP_OP] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_1] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_2] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_3] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_4] [char](6) DEFAULT '' NOT NULL,
[QM_RESP_OP_5] [char](6) DEFAULT '' NOT NULL,
[QM_RECONTACT] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REQ_FLAG] [smallint] DEFAULT 0 NOT NULL,
[QM_ORIG_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_ORIG_TIME] [int] DEFAULT -1 NOT NULL,
[QM_PREF_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_PREF_TIME] [int] DEFAULT -1 NOT NULL,
[QM_LATE_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_LATE_TIME] [int] DEFAULT -1 NOT NULL,
[QM_TITLE] [char](72) DEFAULT '' NOT NULL,
[QM_DELIV_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_CLT_SPEC] [char](12) DEFAULT '' NOT NULL,
[QM_TAX_REF] [char](22) DEFAULT '' NOT NULL,
[QM_CONTACT] [char](36) DEFAULT '' NOT NULL,
[QM_PHONE] [char](22) DEFAULT '' NOT NULL,
[QM_FAX] [char](22) DEFAULT '' NOT NULL,
[QM_ORDER] [char](20) DEFAULT '' NOT NULL,
[QM_ORDER_CFM] [smallint] DEFAULT 0 NOT NULL,
[QM_ORDER_REL] [char](6) DEFAULT '' NOT NULL,
[QM_REP] [char](12) DEFAULT '' NOT NULL,
[QM_REP_1] [char](12) DEFAULT '' NOT NULL,
[QM_REP_2] [char](12) DEFAULT '' NOT NULL,
[QM_REP_3] [char](12) DEFAULT '' NOT NULL,
[QM_REP_4] [char](12) DEFAULT '' NOT NULL,
[QM_REP_5] [char](12) DEFAULT '' NOT NULL,
[QM_COORDINATOR] [char](12) DEFAULT '' NOT NULL,
[QM_PRIORITY] [smallint] DEFAULT 0 NOT NULL,
[QM_TYPE_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_GRADE] [smallint] DEFAULT 0 NOT NULL,
[QM_FIN_SIZE_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_FIN_WID] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_LEN] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_DEP] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_GUSS] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_GSM] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_FIN_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_ORIENT] [smallint] DEFAULT 0 NOT NULL,
[QM_PROD_CODE] [char](22) DEFAULT '' NOT NULL,
[QM_FIN_GOOD] [char](22) DEFAULT '' NOT NULL,
[QM_CUST_CODE] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_CODE_1] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_CODE_2] [char](12) DEFAULT '' NOT NULL,
[QM_CUST_PROS] [smallint] DEFAULT 0 NOT NULL,
[QM_REQD_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_REQD_TIME] [int] DEFAULT -1 NOT NULL,
[QM_FOLIO] [char](12) DEFAULT '' NOT NULL,
[QM_FOLIO_1] [char](12) DEFAULT '' NOT NULL,
[QM_FOLIO_2] [char](12) DEFAULT '' NOT NULL,
[QM_PACK_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_USAGE] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_REORDER] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_EACH_WGT] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_WGT_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_RFQ_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_RFQ_TIME] [int] DEFAULT -1 NOT NULL,
[QM_RFQ_OPR] [char](6) DEFAULT '' NOT NULL,
[QM_SALES_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_SALES_SRC] [char](12) DEFAULT '' NOT NULL,
[QM_SALES_RSN] [char](12) DEFAULT '' NOT NULL,
[QM_PROFILE] [char](12) DEFAULT '' NOT NULL,
[QM_JOB_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_PREV_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_JOB_UNIT] [char](12) DEFAULT '' NOT NULL,
[QM_PO_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_PO_TIME] [int] DEFAULT -1 NOT NULL,
[QM_PO_OP] [char](6) DEFAULT '' NOT NULL,
[QM_DLY_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_DLY_TIME] [int] DEFAULT -1 NOT NULL,
[QM_QTY_DESP] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_TOTAL_DLY] [int] DEFAULT 0 NOT NULL,
[QM_SCHED_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_SCHED_TIME] [int] DEFAULT -1 NOT NULL,
[QM_CLOSE_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CLOSE_TIME] [int] DEFAULT -1 NOT NULL,
[QM_INV_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_PACK_NUM] [char](12) DEFAULT '' NOT NULL,
[QM_DOWN_LOAD] [smallint] DEFAULT 0 NOT NULL,
[QM_TRACK_CODE] [char](4) DEFAULT '' NOT NULL,
[QM_TAX_TYPE] [smallint] DEFAULT 0 NOT NULL,
[QM_TAX_CODE] [char](6) DEFAULT '' NOT NULL,
[QM_CURR] [char](6) DEFAULT '' NOT NULL,
[QM_EXCH_RATE] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_UNIT_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_UNIT_FLAG] [smallint] DEFAULT 0 NOT NULL,
[QM_RUNON_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_SPEC_QTY] numeric(26,8) DEFAULT 0 NOT NULL,
[QM_CHARGEABLE] [smallint] DEFAULT 0 NOT NULL,
[QM_NC_REASON] [char](22) DEFAULT '' NOT NULL,
[QM_CUST_MKUP] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_JOB_MKUP] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_BROKERAGE] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_CUST_DISC] numeric(18,8) DEFAULT 0 NOT NULL,
[QM_INVOKED_BTNS] [int] DEFAULT 0 NOT NULL,
[QM_IMPORTED] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_RECALC] [smallint] DEFAULT 0 NOT NULL,
[QM_IMPORT_CONVERT] [smallint] DEFAULT 0 NOT NULL,
[QM_BRANCH] [char](6) DEFAULT '' NOT NULL,
[QM_CODE] [char](36) DEFAULT '' NOT NULL,
[QM_TEMPLATE] [smallint] DEFAULT 0 NOT NULL,
[QM_REPEAT_PERIOD] [int] DEFAULT 0 NOT NULL,
[QM_REOPEN_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_CAT_OPTION] [char](16) DEFAULT '' NOT NULL,
[QM_UNIT_ID] [char](10) DEFAULT '' NOT NULL,
[QM_PROD_BRANCH] [char](6) DEFAULT '' NOT NULL,
[QM_UID] [int] DEFAULT 0 NOT NULL,
[QM_AVAIL_DATE] [smalldatetime] DEFAULT ('1900-01-01') NOT NULL,
[QM_AVAIL_TIME] [int] DEFAULT -1 NOT NULL
) ON [PRIMARY]
GO
-- Create an index on the table
CREATE unique INDEX [QM_NUMBER_ORDER] ON tmp([QM_QUOTE_JOB], [QM_NUMBER]) ON [PRIMARY]
GO
-- Populate the table
declare @Counter as int
SET NOCOUNT ON
set @Counter = 1
while @Counter < 100000
begin
insert into tmp (QM_ADD_TIME, QM_NUMBER) values (1,@Counter);
set @Counter = @Counter + 1
end
GO
-- Update QM_UID to a sequential value
declare @NextID int;
set @NextID = 1;
update tmp set QM_UID=@NextID, @NextID = @NextID + 1;
-- Find rows with a duplicate QM_UID (there should be no duplicate)
select QM_UID, count(*) from tmp group by QM_UID having count(*) > 1 order by QM_UID
--drop table tmp
-- output from select @@VERSION
-- Microsoft SQL Server 2005 - 9.00.3054.00 (Intel X86) Mar 23 2007 16:28:52 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
View 4 Replies
View Related
Feb 12, 2008
Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
View 1 Replies
View Related
May 14, 2008
Hi All,
I have a stored proc which is executing successfully...but the results of that stored proc are displaying in the Messages Tab instaed of results Tab. And in the Results Tab the results shows as 0..So, Any clue friends..it is very urgent..I am trying to call this stored proc in my Report in SSRS as well but the stored proc is not displaying there also...Please help me ASAP..
Thanks
dotnetdev1
View 4 Replies
View Related
Jun 18, 2008
Hi all, I have the following SQLDataSource statement which connects to my Gridview:<asp:SqlDataSource ID="SqlDataSourceStandings" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT P.firstName, P.lastName, T.teamName, IsNull(P.gamesPlayed, 0) as gamesPlayed, IsNull(P.plateAppearances,0) as plateAppearances, IsNull( (P.plateAppearances - (P.sacrifices + P.walks)) ,0) as atbats, IsNull(P.hits,0) as hits, P.hits/(CONVERT(Decimal(5,2), IsNull(NullIF(P.atbats, 0), 1))) AS [average], (P.hits + P.walks)/(CONVERT(Decimal(5,2), IsNull(NullIF( (P.atbats + P.sacrifices + P.walks) , 0), 1))) AS [OBP], (P.hits - (P.doubles + P.triples + P.homeRuns) + (2 * P.doubles) + (3 * P.triples) + (4 * P.homeRuns)) / (CONVERT(Decimal(5,2), IsNull(NullIF(P.atbats, 0), 1))) AS [SLG], P.singles, P.doubles, P.triples, P.homeRuns, P.walks, P.sacrifices, P.runs, P.rbis FROM Players P INNER JOIN Teams T ON P.team = T.teamID ORDER BY P.firstName, P.lastName"></asp:SqlDataSource>There are 8 teams in the database, and somehow the average and obp results are as expected for all teams except where T.teamID = 1. This doesn't make sense to me at all! For example, I get the following results with this same query: First NameLast NameTeamGPPAABHAVGOBPSLG1B2B3BHRBBSACRRBI
BrianAustinHope83432230.7187500.7352941.15625014612201221
GabrielHelbigSafe Haven62119141.0000000.9375002.1428576404111519
MarkusJavorSafe Haven82927200.8695650.8000001.21739114501021218
RobBennettMelville83029240.8275860.8333331.55172411904102117
AdamBiesenthalSafe Haven82929210.9130430.9130431.56521712631001015
ErikGalvezMelville82625180.7200000.7307691.24000011322101015 As you can see, all teams except for Safe Haven's have the correct AVG and OBP. Since AVG is simply H/AB, it doesn't make sense for Gabriel Helbig's results to be 1.00000. Can anyone shed ANY light on this please?Thank you in advance,Markuu ***As a side note, could anyone also let me know how I could format the output so that AVG and OBP are only 3 decimal places? (ex: 0.719 for the 1st result)***
View 2 Replies
View Related
Oct 19, 2007
Hi,
I have a web form that lets users search for people in my database they wish to contact. The database returns a paged set of results using a CTE, Top X, and Row_number().
I would like to give my users to option of removing individual people from this list but cannot find a way to do this.
I have tried creating a session variable with a comma delimited list of ID's that I pass to my sproc and use in a NOT IN() statement. But I keep getting a "Input string was not in a correct format." Error Message.
Is there any way to do this? I am still new to stored procedures so any advice would be helpful.
Thanks
View 3 Replies
View Related
Jan 30, 2008
Hi, when I copy and paste results from query analyzer into Excel it appears that values with zeroes at the end loose the zeroes. Example, if I copy and paste V128.0 into an Excel cell it comes out as V128 or if I copy 178.70 it displays as 178.7 - any ideas? I'm using SQL Enterprise Manager for 2000.
View 6 Replies
View Related
Jan 25, 2008
This sproc seems to be way over my head. First off, let's start with the scenario. I have two tables. tblInventory and tblTempCart. Each contain an ItemID and Quantity. I need an sproc that will loop through the rows in tblTempCart and sum the quantity of each ItemID. Then, it needs to update the quantity in tblInventory based on what has been ordered for that ItemID.
What I have tried thus far:
UPDATE dbo.[4HCamp_tblStoreInventory]SET Quantity = Quantity - (SELECT SUM(dbo.[4HCamp_tblStoreTempCart].Quantity) AS Quantity FROM dbo.[4HCamp_tblStoreTempCart] WHERE dbo.[4HCamp_tblStoreTempCart].ItemID = dbo.[4HCamp_tblStoreInventory].ItemID)
This works other than if the ItemID doesn't exist in tblTempCart, then it updates the quantity in tblInventory to NULL instead of retaining it's current value. I have no experience with looping in sql so any help will be greatly appreciated.
Thanks!
Amanda
View 1 Replies
View Related
May 2, 2008
I am trying to design a stored procedure to list out all of the unique software items that have been approved. There are multiple tables involved: CISSoftware, Software, Manufacturers, SoftwareTypes. Despite putting DISTINCT, I am still receiving rows of records where the software title (the title field) is a duplicate. Why is this query not working? Am I overlooking something?
SELECT DISTINCT CISSoftware.SoftwareID, Software.Title, Manufacturers.ManufacturerID, Manufacturers.ManufacturerName, SoftwareTypes.SoftwareTypeID, SoftwareTypes.Type
FROM CISSoftware, Software, Manufacturers, SoftwareTypes
WHERE CISSoftware.SoftwareID = Software.SoftwareID
AND Software.ManufacturerID = Manufacturers.ManufacturerID
AND Software.SoftwareTypeID = SoftwareTypes.SoftwareTypeID
View 4 Replies
View Related
Apr 10, 2004
hi all,
I'm trying to learn using sproc in ASP.NET, but ran into problems I couldn't solve. Here're the details
My Table (JournalArticle)
ArticleID - int (PK)
ArticleTitle - varchar
ArticleContent - text
I could run a normal sql string against the table itself in ASP.NET and got the results I expect.
but when using a sproc, i couldn't get anything
The sproc
CREATE PROCEDURE dbo.sp_ArticleSearch(@srch text)
AS SELECT ArticleID, ArticleTitle, ArticleContent
FROM dbo.JournalArticle
WHERE (ArticleAbstract LIKE @srch)
GO
After reading some of the threads here, I experimented by changing ArticleContent and @srch to type varchar, still no luck, it's not returning anything.
I think the problem is when i set the value of @srch (being new at this, I could be seriously wrong though), like this:
prmSearch.ParameterName = "@srch"
prmSearch.SqlDbType = SqlDbType.Text
prmSearch.Value = Request.Form("txtSearch")
My original string looks like this
strSQL = "SELECT * FROM JournalArticle WHERE (ArticleContent LIKE '%" & Request.Form("txtSearch") & "%')"
What am I doing wrong?? Thanks in advance for any help.
View 7 Replies
View Related
Dec 2, 2004
I have tried to mix this around every way I can think of but the procedure inserts two rows instead of one. You will notice that I specify two commands/sprocs. I did that as part of my trying everything. when it was one command/sproc it did the same thing... What am I doing wrong? Please Help! :)
___________________
SPROC:
___________________
CREATE PROCEDURE dbo.sp_addMembershipRole
@INCID Int
AS
declare @literal NVarChar (10)
SET @literal = 'RTRListing'
INSERT INTO dbo.RTR_memberPermissions ([memberID], [Role])
VALUES (@INCID, @literal)
GO
___________________
CODE:
___________________
using System;
using System.Collections;
using System.ComponentModel;
using System.Data;
using System.Data.SqlClient;
using System.Drawing;
using System.Web;
using System.Web.SessionState;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.HtmlControls;
using System.Security.Cryptography;
using System.Web.Security;
namespace admin
{
/// <summary>
/// Summary description for createMembership.
/// </summary>
public class createMembership : System.Web.UI.Page
{
protected System.Web.UI.WebControls.RequiredFieldValidator Vusername;
protected System.Web.UI.WebControls.RequiredFieldValidator Vpassword;
protected System.Web.UI.WebControls.RequiredFieldValidator Vretype;
protected System.Web.UI.WebControls.TextBox username;
protected System.Web.UI.WebControls.TextBox password;
protected System.Web.UI.WebControls.TextBox retype;
protected System.Web.UI.WebControls.Label lblError;
protected System.Web.UI.WebControls.Label lblDate;
protected System.Web.UI.WebControls.Button btnAdd;
private void Page_Load(object sender, System.EventArgs e)
{
if(! Page.IsPostBack)
{
string StrContactID = Request.QueryString["CID"].ToString();
Session["CID"]= StrContactID;
}
}
#region Web Form Designer generated code
override protected void OnInit(EventArgs e)
{
//
// CODEGEN: This call is required by the ASP.NET Web Form Designer.
//
InitializeComponent();
base.OnInit(e);
}
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.btnAdd.Click += new System.EventHandler(this.btnAdd_Click);
this.Load += new System.EventHandler(this.Page_Load);
}
#endregion
public void btnAdd_Click(object sender, System.EventArgs e)
{
int intContactID;
string StrCID = Session["CID"].ToString();
intContactID= Int32.Parse(StrCID);
if(password.Text != retype.Text)
{
lblError.Text = "Retyping of your desired password did not match. Please try again.";
return;
}
string pwdSalt = CreateSalt(5);
string pwd = password.Text;
string pwdHash = CreatePasswordHash(pwd, pwdSalt);
string connStr= "server=****; uid=****; pwd=****; database=****";
string cmdStr= "sp_addMembershipUandP";
string cmd2Str= "sp_addMembershipRole";
SqlConnection CONN = new SqlConnection(connStr);
CONN.Open();
SqlCommand cmd = new SqlCommand(cmdStr, CONN);
cmd.CommandType = CommandType.StoredProcedure;
SqlCommand cmd2= new SqlCommand(cmd2Str, CONN);
cmd2.CommandType = CommandType.StoredProcedure;
SqlParameter param;
param = cmd.Parameters.Add("@username", SqlDbType.NVarChar, 50);
param.Value = username.Text;
param = cmd.Parameters.Add("@password", SqlDbType.NVarChar, 50);
param.Value = pwdHash;
param = cmd.Parameters.Add("@salt", SqlDbType.NVarChar, 50);
param.Value = pwdSalt;
param = cmd.Parameters.Add("@CID", SqlDbType.Int, 4);
param.Value = intContactID;
SqlParameter param2;
param2 = cmd2.Parameters.Add("@INCID", SqlDbType.Int, 4);
param2.Value = intContactID;
cmd.ExecuteNonQuery();
cmd2.ExecuteNonQuery();
CONN.Close();
return;
}
private static string CreateSalt(int size)
{
RNGCryptoServiceProvider rng = new RNGCryptoServiceProvider();
byte[] buff = new byte[size];
rng.GetBytes(buff);
return Convert.ToBase64String(buff);
}
private static string CreatePasswordHash(string pwd, string salt)
{
string saltAndPwd = String.Concat(pwd, salt);
string hashedPwd = FormsAuthentication.HashPasswordForStoringInConfigFile(saltAndPwd, "SHA1");
return hashedPwd;
}
}
}
View 2 Replies
View Related
