I have been trying all day to install SQL 7.0 on an NT 4.0 SP6a server. It gets to the point where it wants to load MDAC and just goes out to lunch. No errors are generated and the rest of the system does not appear to be affected. However, the only way to end the install is to end task it. Has anyone run into this?
View 1 RepliesFirst off, let me say it took me nearly all day to get this working. When you download the sql2decksp3.exe you might think it install like any other program. No. This exe simply unpacks the setup files. The actual setup program, setup.exe must be run from a DOS command prompt.... so you've got to look up the correct command line parameters in the sp3reademe.htm file. Something like:
setup INSTANCENAME="InstanceName" SECURITYMODE=SQL SAPWD="AStrongSAPwd"
No problem so far, but then when I go to run the setup.exe with the correct parameters the install goes fine until the last 5 seconds. Then hangs. Again and again. The install program keep getting hung up just before the finish. Each time I had to uninstall and reinstall-- 6 times. When if it hangs you've got to break out with the Task Manager, then do an uninstall from the Control Panel... if... an entry there was created. It usually is.
I tried everything I could think of and then did a search here. There were a few messages. The only one who actually got past this problem said he deleted all references for "Microsoft SQL" in the registry. I tried that too. It didn't work for me. That setup hung in the very same place. Then instead of breaking out and starting again, I tried shutting the machine down, while the setup was hung, thinking that maybe after a restart the installation might continue AND and that point the install completed.
Hope these notes help the next person who runs into the same problem. I also tried putting the modem on standby and disabling Norton anti-virus. Alone that did help, but when I tried all this stuff together... finally at 4:34 PM, I was able to establish a connection, from both VB.NET and with a great FREE MS SQL Manager at http://sqlmanager.net/products/mssql/manager/download
Now I can start. For some reason, the way I think... I can't do any coding until the entire database spec is first set up. Then you write all the add, edit, display and sort form, windows. When designing web applications, you design the database first, then each web form preforms some unique operation or reference on the remote database. I think that's the way it works.
Hey! Hope this helps others.
Paul Townsend
While installing SQL 7.0 on nt4/sp6 it hangs during the MDAC portion.
The copying of files is succesfull but when it goes to the MDAC portion it hangs.
I installed MSDE. Then I changed the name of my machine. Then I uninstalled MSDE, so I could create a new, properly-named instance.
Now, when I try to install, the installer gets about 75% of the way through the "gathering information" stage, and hangs, every time. I have to kill it with Task Manager.
Help! What can I do?
Extra info: I thought maybe the problem was related to Norton AV, so I uninstalled that. While that was uninstalling, the installer announced that there was a "suspended" install of MSDE that needed to be cleared. So I said, yes, clear it. How do I find out if there are other suspended installs in progress?
Thanks...
Hi,
I hope someone out there can help, cos i really need it.
We have a 2 node cluster + SAN that will be used as our SQL 2000 servers.
We have setup the cluster ok, and have tested failover with no problems.
However, when we try to install SQL 2000, it just hangs.
I have copied the enterprise cd to the local drive, and am installing from there.
We run the setup.bat, create the Virtual Server, and assign an ip address. At this point, it just hangs.
Upon checking the SQLSTP.LOG file, this is the last entry in the log:
Begin Action : DialogShowSdDiskGroups
I have found the Microsoft Technet Article 293788, which gives me a possible soloution, but we dont have any Resource Names or Groups that have the same name.
Can someone PLEASE give me an answer on how to fix this, or at least point me in the right direction.
Many Thanks
Darren
Just purchased a new server, and am trying to install SQL Server 2005 standard, 64 bit. I'm running Windows Server 2005 r2 64 bit.
Setup support files installs fine.
System configuration passes all 14 checks.
Then it moves to install and just hangs there. Eventually, perhaps maybe after 20-30 minutes does it create a message saying that the Install has failed to respond. Retry or cancel.
I am experiencing extremely slow behavior (no activity for > 30 mins) during a SS 2005 Dev Edition install on XP SP2 on various steps during the SQL Server Database Services step - e.g. during "Setting File Security". This is very annoying.
I've found many postings on this issue indicating that OS calls in this part of the install (e.g. LookupAccountName()) are network speed dependent.
Does Microsoft have any plans to rework this part of the install to rid the need of these calls? I really wish the install would be possible without these calls - it's driving me crazy monitoring this for hours. We've got to roll SS2005 out to a couple hundred developers eventually and this isn't going to cut it.
Thanks for your time on this matter.
Best Regards,
Mike
I am trying to install SQL Server 2012 onto an already configured and validated windows failover cluster (server 2012) but the process is hanging after installing the setup files.
The last entry in the log is:
running discovery on remote machine
and I've left it hanging like this for 4 hours and nothing happens.
HELP!
For the past several weeks, I have been trying to install SQL Server 2005 on a Win XP SP2 PC. Regardless of the options I choose (SQL Engine + Client Tools, Client Tools only, etc.) when the installation gets to the end of the Client Tools setup and the setup status displays "Removing Backup Files", my PC appears to hang.
For a period of time, there is a fair amount of HD activity which gives me the impression that files are in fact being deleted, but then there is no HD activity and the installation appears to hang. Finally I give up and kill the setup process and reboot.
After reboot, it appears that the client tools have been installed (the icons appear and I can open the Management Studio, but when I try to connect to an existing instance of SQL, that hangs. This occurs for either Windows or SQL authentication.
Has anyone experienced this behavior and determined the root cause? What EXACTLY is happening during the "Removing Backup Files" phase of the installation?
Thanks for any help in advance,
Marc Mueller
I am currently running Windows XP Professional Service Pack2. It already has MSDE & SQL Server 2000 installed (although I just uninstalled MSDE in the vain hope that it might present the installer with a more straightforward upgrade).
I have tried installing with the default instance & a new instance (I don't really care - I just need to install the darn thing). I just want the basic database & Books On-line, nothing fancy.
Here is the Summary log, for what it's worth:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Feb 06 16:45:14 2007
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BOL_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : SQLXML4
Error : Setup is preparing to continue with the installation.
--------------------------------------------------------------------------------
Here is the SQLSetup0011_ANTHONYY1_Core(Local).log
Microsoft SQL Server 2005 Setup beginning at Tue Feb 06 16:45:14 2007
Process ID : 2560
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/1/6 16:45:14
Complete: LoadResourcesAction at: 2007/1/6 16:45:14, returned true
Running: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14, returned true
Running: ValidateWinNTAction at: 2007/1/6 16:45:14
Complete: ValidateWinNTAction at: 2007/1/6 16:45:14, returned true
Running: ValidateMinOSAction at: 2007/1/6 16:45:14
Complete: ValidateMinOSAction at: 2007/1/6 16:45:14, returned true
Running: PerformSCCAction at: 2007/1/6 16:45:14
Complete: PerformSCCAction at: 2007/1/6 16:45:14, returned true
Running: ActivateLoggingAction at: 2007/1/6 16:45:14
Complete: ActivateLoggingAction at: 2007/1/6 16:45:14, returned true
Running: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14
Complete: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2560" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2007/1/6 16:45:14
Complete: PerformDotNetCheck2 at: 2007/1/6 16:45:14, returned true
Running: InvokeSqlSetupDllAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [ANTHONYY1]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = ANTHONYY1, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = XMLDomDocument, Result = 0 (0x0)
Machine = ANTHONYY1, Article = Processor, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PhysicalMemory, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSServicePack, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSType, Result = 0 (0x0)
Machine = ANTHONYY1, Article = iisDep, Result = 0 (0x0)
Machine = ANTHONYY1, Article = AdminShare, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PendingReboot, Result = 70011 (0x1117b)
Machine = ANTHONYY1, Article = PerfMon, Result = 0 (0x0)
Machine = ANTHONYY1, Article = IEVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = ANTHONYY1, Article = COMPlus, Result = 0 (0x0)
Machine = ANTHONYY1, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = ANTHONYY1, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: ANTHONYY1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
<Func Name='DisplaySCCWizard'>
CSetupBootstrapWizard returned 1
<EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'>
Failed to find help file for LCID :2057
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2007/1/6 16:49:35, returned true
Running: SetPackageInstallStateAction at: 2007/1/6 16:49:35
Complete: SetPackageInstallStateAction at: 2007/1/6 16:49:36, returned true
Running: DeterminePackageTransformsAction at: 2007/1/6 16:49:36
Complete: DeterminePackageTransformsAction at: 2007/1/6 16:49:47, returned true
Running: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47
Complete: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47, returned true
Running: OpenPipeAction at: 2007/1/6 16:49:47
Complete: OpenPipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2007/1/6 16:49:47
Complete: CreatePipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2007/1/6 16:49:47
Complete: PopulateMutatorDbAction at: 2007/1/6 16:49:47, returned true
Running: GenerateRequestsAction at: 2007/1/6 16:49:47
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = 3
SQL_SharedTools = 3
SQL_BC_DEP = 3
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = 3
SQL_WarehouseDevWorkbench = 3
SDK = 3
SQLXML = 3
Tools_Legacy = 3
TOOLS_BC_DEP = 3
SQL_Documentation = 3
SQL_BooksOnline = 3
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2007/1/6 16:49:48, returned true
Running: CreateProgressWindowAction at: 2007/1/6 16:49:48
Complete: CreateProgressWindowAction at: 2007/1/6 16:49:48, returned true
Running: ScheduleActionAction at: 2007/1/6 16:49:48
Complete: ScheduleActionAction at: 2007/1/6 16:49:48, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2007/1/6 16:49:48
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallSqlAction.11 at: 2007/1/6 16:49:51, returned true
Running: InstallSqlAction.12 at: 2007/1/6 16:49:51
Installing: sqlncli on target: ANTHONYY1
Complete: InstallSqlAction.12 at: 2007/1/6 16:49:55, returned true
Running: InstallSqlAction.18 at: 2007/1/6 16:49:55
Installing: owc11 on target: ANTHONYY1
Complete: InstallSqlAction.18 at: 2007/1/6 16:49:56, returned true
Running: InstallSqlAction.21 at: 2007/1/6 16:49:56
Installing: sqlwriter on target: ANTHONYY1
Complete: InstallSqlAction.21 at: 2007/1/6 16:49:58, returned true
Running: InstallSqlAction.22 at: 2007/1/6 16:49:58
Installing: bcRedist on target: ANTHONYY1
Complete: InstallSqlAction.22 at: 2007/1/6 16:50:0, returned true
Running: InstallSqlAction.9 at: 2007/1/6 16:50:0
Installing: msxml6 on target: ANTHONYY1
Complete: InstallSqlAction.9 at: 2007/1/6 16:50:2, returned true
Running: InstallToolsAction.11 at: 2007/1/6 16:50:2
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallToolsAction.11 at: 2007/1/6 16:50:5, returned true
Running: InstallToolsAction.12 at: 2007/1/6 16:50:5
Installing: sqlncli on target: ANTHONYY1
Complete: InstallToolsAction.12 at: 2007/1/6 16:50:8, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.18 at: 2007/1/6 16:50:8
Installing: owc11 on target: ANTHONYY1
Complete: InstallToolsAction.18 at: 2007/1/6 16:50:10, returned true
Running: InstallToolsAction.20 at: 2007/1/6 16:50:10
Installing: BOL on target: ANTHONYY1
Complete: InstallToolsAction.20 at: 2007/1/6 16:52:2, returned true
Running: InstallToolsAction.22 at: 2007/1/6 16:52:2
Installing: bcRedist on target: ANTHONYY1
Complete: InstallToolsAction.22 at: 2007/1/6 16:52:4, returned true
Running: InstallToolsAction.9 at: 2007/1/6 16:52:4
Installing: msxml6 on target: ANTHONYY1
Complete: InstallToolsAction.9 at: 2007/1/6 16:52:6, returned true
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallSqlAction at: 2007/1/6 16:52:7
Installing: sql on target: ANTHONYY1
Error: MsiOpenDatabase failed with 110
Failed to install package
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Error: MsiOpenDatabase failed with 110 for MSI D:ServersSetupSqlRun_SQL.msi
Setting package return code to: 1620
Complete: InstallSqlAction at: 2007/1/6 16:52:27, returned false
Error: Action "InstallSqlAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Running: InstallToolsAction.10 at: 2007/1/6 16:52:27
Installing: sqlxml4 on target: ANTHONYY1
Error Code: 0x8007006e (110)
Windows Error Text: The system cannot open the device or file specified.
Source File Name: sqlchainingminorbuildactionbehavior.cpp
Compiler Timestamp: Mon Jun 13 14:30:04 2005
Function Name: sqls::MinorBuildActionBehavior::modifyRequest
Source Line Number: 65
---- Context -----------------------------------------------
sqls::InstallPackageAction::perform
Complete: InstallToolsAction.10 at: 2007/1/6 16:55:59, returned false
Error: Action "InstallToolsAction.10" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Action "InstallToolsAction" will return false due to the following preconditions:
Condition "Action: InstallToolsAction.10 has finished and failed." returned true.
Installation of package: "tools" failed due to a precondition.
Step "InstallToolsAction" was not able to run.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2007/1/6 16:55:59
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1620
Error Code: 0x80070654 (1620)
Windows Error Text: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
led due to cancel code received from cancel source: 29539
...and here is the SQLSetup0011_ANTHONYY1_SQL.log:
=== Verbose logging started: 06/02/2007 16:52:14 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (00:54) [16:52:14:284]: Resetting cached policy values
MSI (c) (00:54) [16:52:14:284]: Machine policy value 'Debug' is 0
MSI (c) (00:54) [16:52:14:284]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (c) (00:54) [16:52:14:284]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (00:54) [16:52:14:284]: Grabbed execution mutex.
MSI (c) (00:54) [16:52:14:299]: Cloaking enabled.
MSI (c) (00:54) [16:52:14:299]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (00:54) [16:52:14:299]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (A4:98) [16:52:14:299]: Grabbed execution mutex.
MSI (s) (A4:00) [16:52:14:299]: Resetting cached policy values
MSI (s) (A4:00) [16:52:14:299]: Machine policy value 'Debug' is 0
MSI (s) (A4:00) [16:52:14:299]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (s) (A4:00) [16:52:21:080]: Note: 1: 2203 2: D:ServersSetupSqlRun_SQL.msi 3: -2147024873
MSI (s) (A4:00) [16:52:21:080]: MainEngineThread is returning 1620
MSI (c) (00:54) [16:52:21:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (00:54) [16:52:21:080]: MainEngineThread is returning 1620
=== Verbose logging stopped: 06/02/2007 16:52:21 ===
I suppose an error dialog (or log message) that actually told you what is wrong and then what to do is too much to ask for. (Or an installer than just copied all the files into place). :(
The error I got is:
Hotfix.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
EventType : sqlsesetup P1 : sysdbupg.sql P2 : 0x7361
P3 : odbcstatement__execute_batch@sysdbupg.sql@3 P4 : 0x7361
P5 : lib_odbc_statement.h@91 P6 : unknown P7 : sql9 P8 : hotfix@
P9 : x86 P10 : 3042
Log Location: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission.. To continue, correct the problem, and then run SQL Server Setup again.
I tried to search internet, however, I couldn't get solution.
My SQL server 2005 is standard version, OS Windows server 2003 sp2, I am using Administrator account to install it.
Thanks a lot,
Rex
I have compile my application into a Smart Device CAB and also including SQLCE CAB file for SQL.
I have users who choose to install SQLCE into Storage Cards instead and causes the application not to function, when asked which destination to install.
I've done some search and found out about "wceload.exe /noaskdest" but I'm using NSIS to compile into a single .exe file, and its calling "CEAppMgr.exe"
How can I force SQLCE to install into its default directory without asking user?
Thanks!
Win XP Pro SP2IIS 5.1SQL 2005 SP1 (Developer edition)VS 2005 SP1.Net 2.0IE7 (didn't work on IE 6 either)Latest updates from Windows updateI have set up SSRS successfully on several machines. But on a new machine with standard install I have the out of the box SSRS report manager running with issues and would like to resolve them. Report Manager will serve image files from my project. But it won't render deployed reports, not even one which has no data sources. From within VS 2005 the same reports render, no problems. The same reports published to another SSRS machine render fine.The browser erorr message is "Value does no fall within the expected range".Any ideas? Thanks in advance.
View 3 Replies View RelatedI posted a message about this yesterday but I have more info..
I have a server (SQL 7.0, sp2) that anywhere I connect to it through EM the EM hangs. I can drill down into the server and even get into the Security drop down but if I hit Databases to drill down or Management etc. It hangs.
I did profiler on this and another server. When I click the + by the Database folder I hang and get
"TSQL:Batch Starting: exec sp_MSdbuseraccess N'db', N'%'"
but never get a "TSQL:BatchCompleted" for that statement. (Where other working servers I do get the set of both start and completed)
Drilling into the Security tab runs the query: exec sp_MSDBUserpriv... etc.) and this one works..
Anyone have any info on: exec sp_MSdbuseraccess N'db', N'%'
I can't find anything in BOL, Microsoft KB, Technet etc.. Please Help as there are certain things I can't do without EM... THANKS!!!
Hi,Is it possible to install Enterprise Manager without to install theserver ?Thanks !--J-L M. (Alphomega)ICQ: 149635116Pour m'écrire, cliquer le lien ci-dessoushttp://cerbermail.com/?G5iYdBb2Ce
View 3 Replies View RelatedHi,
I've tried looking for a solution in other threads but I couldn't find anything that was completely the same as my situation. I got a new pc at work and I've tried installing SQL Server 2005 on it but everytime I try to install it, regardless of services included or excluded with the install, I cannot get through the install without this error. Below is the excerpt from the Summary.txt log file.
Error Code: -2147024894
MSI (s) (74!98) [17:10:55:858]: Product: Microsoft SQL Server 2005 Tools -- Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlAssemblyRegSvcs
PerfTime Start: Do_sqlAssemblyRegSvcs : Mon Nov 12 17:10:55 2007
<Func Name='Do_sqlAssemblyRegSvcs'>
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog.
Error: 2147942402
Error message: The system cannot find the file specified.
Error descrition: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error Code: -2147024894
Windows Error Text: The system cannot find the file specified.
Source File Name: sqlcasqlassembly.cpp
Compiler Timestamp: Thu Aug 11 01:12:01 2005
Function Name: Do_sqlAssemblyRegSvcs
Source Line Number: 155
I've searched for and found similar problems that deal with the microsoft.sqlserver.notificationservices.dll not being found but I haven't found a fix that worked for me. These are the fixes I've refered to thus far.
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1651162&SiteID=17
http://support.microsoft.com/kb/940971
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29549&EvtType=sqlcasqlassembly.cpp@Do_sqlAssemblyRegSvcs@Do_sqlAssemblyRegSvcs@x80131501
The answer that seems to fix this problem for everyone is to set the MSDTC service login as the NT AUTHORITYNetworkService account. The problem for me is that this is already set to this profile and I've tried resetting the services and rebooting the machine. I did not have a problem with my old machine, which as far as I can tell, is the same configuration, so I know this install should work.
I'm running Windows XP SP2. This is not the upgrade to SQL Server 2005 SP2, this is the original disk that came with Visual Studio 2005.
Has anyone else faced this issue where changing the MSDTC login wasn't the solution? Also, this is my first post, so I apologize if I've left anything out. Just let me know if you want any other information.
Thank you in advance.
Tim
I never installed previous beta versions on my computer before. But now I have some serious problem after an incomplete de-install and a re-install of SQL server 2005 express advanced. I hope anybody can help me to solve this. Because the first installation eas not succesfull I had to do an de-install. I have tried to unstall through start/control panel/ add-remove programms and even there not all programs were removed. And that caused the problem. After that I wanted to re-install again but an msi file was missing. So I did a de-install agian. Tried to re-install again but with a lot of errors. After looking at the library I found a program: Windows Install CleanUp. I installed it and that even gives an error for all programs installed with SQL 2005.
After that I ran a program called MsiInv to clean but without any succes because this program reported a run-tim error. I have all reports on my computer but don't know how to attach them. If you think you can help me I could send you all the reports.
Regards,
Jan J
Some of my jobs hang at FTP step for several hours until some one kills the FTP (it's a perl process) on the box. Is there a way to find how much time a particular step of the job is executing? and know it by somehow if it's hanging at that step?? If we know this,I want to kill the perl process(FTP) on the box in an automated way whenever the job hangs! Any ideas welcome!! Thanks. :-)
Di
Hi all - I'm having a problem with a dts job that I haven't run across before. The function of the job itself is pretty basic just moving data into a sql table using a few lookups and mappings. The job starts fine and gets to a status of 5000 records processed and just sits there. It's doesn't go into a 'not responding state' nor does it produce any error information in the error file I set up. Anyone have any thoughts on what might be happening? How to identify the specific record it may be hanging on? Help!! - this one is driving me nuts.
View 4 Replies View RelatedI'm running a pretty simply DTS just to pump some data into a table. Nothing fancy just a couple lookups and a couple columns being copied over. I get to 5000 records processed and the DTS just spins its wheels. It does not go into a 'not responding' state. There are no indexes on the table and the db size is plenty big so it is not reindexing or resizing the db at this point. Any ideas on how I can debug this one would be greatly appreciated.
Thanks
I am having a problem importing data into SQL 7 from any type of source. I go through the whole import process no problem. When I click the finish button to start the import, nothing at all happens. Enterprise Manager and the DTS just hang and I must use crtl+alt+delete to end the program. Can anyone give me any suggestions as to what might be happening. Big Thanks in advance, I've been working on this for days.
glevi
Anyone else had this problem ?
I've run dbcc check commands on a 5Gig database which has 2 Gig of unallocated space, with no problems with the tables or database.
However when i try to run dbcc shrinkfile ( on the DATA file ) from Query Analyser the command just runs indefinitely with no response.
Duncan
PS SQL 7 sp 2
I am having problems of my DTS package hanging when run through the sql server agent through a scheduled job. If I execute the job manually it runs fine? If I run the package manually it runs fine? Of course there is no way to actually tell what is being hung? Any ideas?
Thanks David
Hi everyone, I had to do a restore of a database from tape. I have the tape set to eject when it's complete, the tape ejects and the dialog box looks like the restore finishes fine. But when I look at the database after the restore it is still in the loading phase. So the restore never really took or looks like it hangs. Do you guys know why or how to fix this problem? Thanks in advance.
Stink!
My client is using SQL Server 6.5 on NT 4.0. They have recently began to have their SQL server session freeze intermittently.
I have determined that only users that are accessing one particular database are freezing which leads me to a locking problem.
What is the best way to determine the locking problem (i.e. event logs, sp_lock, ....)?
Hello everyone,
I've done some searching, asking of friends, and searching every log file and event file I can think of. So now I'm coming here.
Recently I moved some of our databases from an NT4 box running SQL 7 to an Advanced 2000 box running SQL 2000. The web server is still on an NT4 box. It seems that about three times a day or so ASP type files will hang on the webserver. This server hosts different sites and all ASP type files will stop even if some of them hit the old SQL7 server.
Right now I moved the web server back to looking at the SQL 7 machine and things are going fine.
Can anyone offer me a direction to start looking? Why is it working fine to the old stuff but not the new stuff? Is there an issue with NT4 with its IIS trying to talk to an Advanced 2000 with its SQL2000?
Thank you in advance for any help.
I've written a recursive CTE to update a table's heirarchy data with a lineage that the CTE builds. This works and executes over 80,000 records on my local test environment in about 45 seconds. However when I try to execute it from a "production" environment, it hangs and never completes the update (well at least it's taking longer than 5 minutes and I'm too impatient to wait). The CTE itself still runs fine and returns data if I do a Select *, but not when I run the update. Here's my CTE, any ideas? Is there anything in database settings that would disallow this query update? or field requirements?
WITH MyLineage (ID, Lineage, ParentID)
AS (SELECT ID, CAST('.'+ convert(nvarchar(max), ID) +'.' AS nVarchar(max)) as Lin, ParentID FROM Equipment WHERE OrgID=2 AND ParentID IS NULL
UNION ALL
SELECT E.ID, CAST(L.Lineage+ convert(nvarchar(max),E.ID)+'.' AS nVarchar(max)) AS Lin, E.ParentID FROM Equipment E INNER JOIN MyLineage L ON L.ID=E.ParentID WHERE L.ID=E.ParentID)
UPDATE E SET E.Lineage=L.Lineage FROM Equipment E INNER JOIN MyLineage L ON E.ID=L.ID
If I try to do the update like this:
UPDATE Equipment SET Lineage=(SELECT Lineage FROM MyLineage WHERE MyLineage.ID=Equipment.ID)
it will hang in my local test environment as well. It seems like the other sql 2005 server instance is converting the join update into a nested select update, or something. I don't know what's going on, help?
Hi ppl
I have a DTS that is loading 6 text files into respective tables. Before loading this files the tables are emptied using SQL tasks with the following code:
DELETE
FROM Table1
WHERE (OMC=?)
OMC is a PK from table1 and ? is a parameter within the DTS.
Occasionally the system hangs executing these delete statements for one of the tables (not always the same!)
I’m forced to reboot and then DB goes trough a recovery process.
Any idea what might be wrong?
Thanks in advance
Hi,Currently it is running on SQL 7.00.623 on Winnt 4.0+SP5.Now i want to upgrade this with SP 4.As i follow the installation procedure according to MicrosoftSQL7SP4 readme help, It hangs during the installation of Mdac_typ.exe.Don't know where and whats went wrong with the procedure.I've tried 3-4 times to install it but the same problem raises. Pleasesome body assist me how to complete this installation.Thanks in advanceIvar
View 2 Replies View RelatedI have an SSIS .dtsx package that will run fine during debugging, however, when I run it as a job under the SQL Agent the job won't start.
To be more specific, the Agent will load the package, ensure that it passes validation (which it does), then sit there without starting the rest of the package.
The job will run under the "executing" status until I stop it manually.
Does anyone have any idea why it might be doing this?
I've installed SSE2005 (with SP1 and the hotfix rollup) on a Small Business Server 2003 SP1, and 90% of the time, all is well.
SSE is running two user databases; one for an ASP web-based application, and one for a desktop application. Occasionally, pretty much everything for both apps hangs for a number of seconds (variable, but probably about 10-30 seconds at a time). During the hangs, even using Management Studio Express becomes impossible, and Activity Monitor just times out, so I can't see what's happening. SSE's Errorlog and server Event Logs show nothing unusual.
The hangs tend to come in batches, on-and-off for an hour or so, after which the problem clears and it's service as usual.
Does anyone have any ideas what the problem might be, or at least how to start tracking it down?
Hi,
I have a package that runs just fine from BIDS. There are no message boxes in any scripts, or prompts of any kind.
However, when I attempt to the exact same package from a job, it just hangs forever.
Is there an obvious explanation for this?
Thanks
I have a problem where a SQL 2005 server in the morning will deny all connections do to a time out error. Sytem has 4 CPU's in it and sqlservr.exe is utilizing 85% of all CPU's. If I run filemon it does not show activity to any of the SQL databases. I get a login timeout message when I try to connect via the enterprise manager or from a command prompt, even if I bump the timeout delay to 5 minutes. If I restart the SQL Server services all is fine for a few days.
View 4 Replies View Related