We are receiving an intermitent
error "SqlDumpExceptionHandler: Process 120 generated
fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL
Server is terminating this process. [SQLSTATE HY000]
(Error 0). The step failed." From our Sql mail. We are
running Windows 2000 Advanced Server and SQL Server 2000
sp3. Has anyone seen this and do you have a solution or
suggestions?
Microsoft SQL Server 2000 - 8.00.760 (Intel X86) Dec 17
2002 14:22:05 Copyright (c) 1988-2003 Microsoft
Corporation Enterprise Edition on Windows NT 5.0 (Build
2195: Service Pack 4)
I have a big problem on one of our servers here. We have a server (2 processors) with sql7 sp2 (NT4.0 sp6) and 1Gb mem.
With help of client access (V3R2) we retreive data from a AS400 database. This works well on a lot of out servers (20).
On this one server we get an "exception access violation" :
SqlDumpExceptionHandler: Process 12 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.Msg 7399, Level 16, State 1, Server AA0001, Procedure TmpVwAC, Line 3OLE DB provider 'MSDASQL' reported an error. The provider reported an unexpected catastrophic failure.
It runs well many times and suddenly this error occurs.
after one database with 'suspect' and run the sp_resetstatus to remove the suspect, other errors showed after restart SQL2k MSDE sp3. ------------------------------------ 12/10/03 10:10:09 spid 79 Exception 0xc0000005 EXCEPTION_ACCESS_VIOLATION at 0x00403AF0
language_exec: Process 79 generated an access violation. SQL Server is terminating this process.. 2003-12-10 10:10:45.70 spid79 Using 'dbghelp.dll' version '4.0.5' *Dump thread - spid = 79, PSS = 0x1fd2f238, EC = 0x1fd2f560 *Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump1043.txt
We are using SQL Server 6.5, Service Pack 4. We have been facing the Error "EXCEPTION_ACCESS_VIOLATION" when we are running a store procedure which has got joins betweeen temporary tables and views whose source is in another database. The full error message is :-
EXCEPTION_ACCESS_VIOLATION raised, attempting to create symptom dump
** BEGIN STACK TRACE ** 0X00406E71 in SQLSERVER.EXE, CDTCState::~CDTCState() + 0x0101 followed by around 15 similar messages of above line.
Has anyone has faced similar problems and have any workarounds or solutions for similar problems ???
jack_low writes "window 2000 server SQL server 2000 service pack 2
I have an error message in sql server 2000 and it has cause the sql server stop responding and i need to reboot the server whenever it happen . See below
* BEGIN STACK DUMP: * 06/15/06 10:25:56 spid 156 * * Exception Address = 00403431 (lck_lock(class LockRequest const &,class Lock Res const &,class LockInfo *) + 0000008D Line 0+00000000) * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION * Access Violation occurred reading address 20202028 * Input Buffer 370 bytes - * SELECT * FROM INVMAS WHERE SGLOT1 = 'Z' and SGLOT2 = 'PO' and SGLOT3 = ' * 6' and SGLOT4 = '05' and SGLOT5 = '9351' and SGLOT6 = '' and SG = '1 * ' and CHOP = 'SZ0697' and SGWTH = '67'
hello!i am trying to import a text file using dts into a table created by thepackage. everything checks out until it is run. the table is createdbut then i get an error:"need to run the object to perform the operation. Provider generatedcode execution exception EXCEPTION_ACCESS_VIOLATION"any ideas?this is a development box. maybe the server cant handle it?thanks in advance!Tom
To all: I have installed a new Compaq 7000 with NT4.0 sp3 and Sql Server 6.5 sp4 into production about two weeks ago. Everything went fine until yesterday. Around noon I received 2 Exception_Access_Violation about a second apart with two differend spids. About 20 mins later I got the Out of connections message and sql server stopped reponding. I Could not stop sql server and had to reboot the server. I have configured the connections at 600 and generally we average a little over 400. Everything seems to be running fine now but I would like to get some information from all the great minds out there!
What exectly is Exception_Access_Violation? Can I figure out what caused it or can I debug it? Do you think that the EAV caused the out of connections error? Any help, insight would help greatly!
We have SQL Server 2000 with SP3 installed on Windows 2000 Advance Server. Server has 8 GB RAM and 4 CPU. Few days back we have installed multiple named instance on this server .Now we have assign each CPU to individual instance and min server memory to 1024 and max server memory is kept open.
After this we are facing an issue with default instance for exception_access_violation as below ... Memory MemoryLoad = 83% Total Physical = 7679 MB Available Physical = 1252 MB Total Page File = 15480 MB Available Page File = 7756 MB Total Virtual = 2047 MB Available Virtual = 344 MB
Hi all, Our production server had a raid failure, which we fixed overnight.
This is where the problem started, at least i think.
Now all of a sudden(after the server was restarted) i am getting following error, when one of the stored procedure gets executed (I have more then 200 Stored Procedure and they are all working fine)
It does not throw error everytime it gets executed, but randomly it will fail.
"SqlDumpExceptionHandler: Process 233 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process"
This error also creats a dump file in MSSQLLog and logs into SQL Error Log.
I also did DBCC CHECKDB suggested by many people on Internet and everything seems fine, in terms of data corruption.
CHECKDB found 0 allocation errors and 0 consistency errors in database 'XXXX'.
I even tried dropping and recreating the stored procedure, but same result and no luck.
My question is why all of a sudden or server re-start would trigger this errors?
By the way I am using VB.Net 2003 and SQL Server 2000. My only fear is that our SQL server does not have latest service pack.
Any ideas or suggestion will be highly appreciated.
Could anyone help about the following case? many many thanks in advance
1. This problem will be happended for different but similar storeprocedures in transient manner. However, when we try to repeat the problem by running the procedure again, it work fines
2. However, the problem has happended again unexpectedly
3. The problem occurs in different server have similar environment (Window 2003 server and SQL Server 2000 SP4).
My team is getting this message when altering a DTS Package, using SQL 2000 DTS Designer. We have downloaded all the SQL updates (Backward Compatibility, and the one specifically for DTS Save problems. Have tried this in SQL2005 as well. Have uninstalled both of these programs, and reinstalled on local machines. No avail. Here is what happens:
1) Editing an existing DTS Package, such as a Text Change, or simple connection change 2) Saving the file creates the exact message below:
Package Error Error Source: Microsoft Data Transformation Services (DTS) Package Error Description: Code execution exception: EXCEPTION_ACCESS_VIOLATION
3) Then you have to choose OK in the windows Popup Box. 4) The DTS is brought back to the original screen, or completely exited out of Designer. 5) From that point, the Package can no longer be opened for editing, unless you open a previous version (which means changes aren't saved.
We have also tried to SAVE AS another filename. This doesn't work either.
Our team has close to 75 DTS Packages, some simple, some more complex. We are corrupting these left and right. This problem happens no matter what is created in the DTS Package.
This is running into our business operations, and we are unable to find out a resolution...HELP
I am getting the following stack error in my SQL Server logs. I understand that there is a Microsoft Hotfix available for this and would like to know where will I find the HOTFIX for this because I didn't find it on Microsoft Website. We are currently on SQL 2000 SP 4 (Windows Server 2003 SP1).
Thanks !
***************************************************************************** Computer type is AT/AT COMPATIBLE. Bios Version is IBM - 1000 Current time is 09:02:25 11/16/07. 4 Intel x86 level 6, 2992 Mhz processor(s). Windows NT 5.2 Build 3790 CSD Service Pack 1.
Memory MemoryLoad = 56% Total Physical = 4095 MB Available Physical = 1800 MB Total Page File = 8026 MB Available Page File = 6052 MB Total Virtual = 2047 MB Available Virtual = 203 MB
Recently, I noticed a monthly-run stored procedure (sp_insertAnnualRenewalLetterPrintedStatus) has been causing the aformentioned error, and it ended up creating all these .dmp files... This stored proc was created 10 months ago, and the error only started happenin' for the last 3-4 months! Also, for approx. every one out of 10 times the stored proc ran OK!
Enclosed here is a sample content at the beginning of these .dmp files... Anyone can shed some light? THANKS IN ADVANCE
SImon ================================================== =================== BugCheck Dump ================================================== ===================
This file is generated by Microsoft SQL Server 1792.961 upon detection of fatal unexpected error. Please return this file, the query or program that produced the bugcheck, the database and the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE. Bios Version is Dell Remote Assistant Card v2.0 detected. Phoenix ROM BIOS PLUS Version 1.10 A01 Current local time is Wed Feb 06 15:48:46 2002 2 Intel x86 level 6, 531 Mhz processor(s). Windows NT 4.0 Build 1381 CSD Service Pack 6.
Stack Dump being sent to e:SQLdatalogSQL00024.dmp ************************************************** ***************************** * * BEGIN STACK DUMP: * 02/06/02 15:48:46 spid 28 * * Exception Address = 0064EBF2 (COpenLockBytesSSWrapper::OpenLockBytes + 40) * Exception Code = c0000005 E * Access Violation occurred reading address 00000004 * Input Buffer 126 bytes - * s p _ i n s e r t A n n u a l R e n e w a l L e t t e r P r i n t e d S * t a t u s ' 2 5 / 0 1 / 2 0 0 2 ' , 6 6 , 0
Hi, we have backups taken regularly on tape device. When I restore the back up on the same server,it is working. But if I try to resotre the same backup on a new server it is giving problems I have the same configuration of the new and old server. It is giving error 10005 DB process dead and after that the database is marked grey and in bracket (loading) and a lot of other errors like Begin Stack Trace, sympton dump created,end stack trace ,etc( A very Long List of errors) and a new dump is created in log directory It is also telling "EXCEPTION_ACCESS_VIOLATION" i am having the same problem on all the servers we have. Help me regarding this. DP
While Excecuting select Query in my client place ,the following error is coming.
SqlDumpExceptionHandler: Process 51 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process..
When i got same database , i try restore in my pc and run the same...query its excecuting properly..with out giving any error..i tried lot of things ..nothing is working out..i am not able to find the root cause itself..why the exception is coming..
I attaching the Error log with this post.
Note: Check For the Keyword 'EXCEPTION_ACCESS_VIOLATION' in the Error Log File.
Any body can help me out in sorting this issue...then :beer: other wise i will be:eek:
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
Hi, I'm not sure if this is the right forum, so please point me in the right direction if it isn't.
I'm getting an EXCEPTION_ACCESS_VIOLATION and a minidump in the SQL server logs when using the OLE DB Provider for SQL Server.
The error occurs when I run an SSIS package non-interactively (using Package.Execute). The odd thing is that the package works fine when I run it from within Visual Studio. Also, this same bit of code was working fine a couple of weeks ago (it's part of my unit tests, it just started failing when I added a new, unrelated SSIS package to the project). The error occurs during the validation phase.
Here's the first part of the stack dump, which just shows that the provider is executing a very simple statement (SELECT * FROM [table-name]):
Code Snippet
* BEGIN STACK DUMP: * 05/14/07 10:42:34 spid 56 * * * Exception Address = 01CBBF90 Module(sqlservr+00CBBF90) * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION * Access Violation occurred writing address 0000001C * Input Buffer 108 bytes - * ÿÿ & ç> ff ff 02 00 00 00 00 01 26 04 00 00 00 e7 3e 00 09 04 * 2> s e l e c t 00 01 32 3e 00 73 00 65 00 6c 00 65 00 63 00 74 00 20 * * f r o m [ d 00 2a 00 20 00 66 00 72 00 6f 00 6d 00 20 00 5b 00 64 * b o ] . [ P x p T 00 62 00 6f 00 5d 00 2e 00 5b 00 50 00 78 00 70 00 54 * a r g e t ] & 00 61 00 72 00 67 00 65 00 74 00 5d 00 00 01 26 04 04 * & & 02 80 03 00 00 01 26 04 04 04 80 04 00 00 01 26 04 00 *
I presume this is something for the SQL Server team; how should I go about getting this resolved?
I have SQL 2K with SP4. Oracle client is installed on the Server. I have created linked server to Oracle. I am abld to connect to Oracle Server through DTS but when I query an oracle linked server SQl Server crashes with "EXCEPTION_ACCESS_VIOLATION" error.
Info on the Server:
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
I have the SQL dump if you need that. Please help.
Hi i am connecting to a DB2 database on a AS400 machine from SQL server 2005. I have setup a linked server to connect to the DB2 database.
Most of the time the query ( select * from OPENQUERY(lnkd_svrname,'select abc from svr_name.lib_name.tablename') ) works fine but at times it comes up with the following error.
I am running SQL server 2000 Std. Edition on a WIN 2000 machine.
Any help would be appreciated . *****ERROR***** From the Exception.Log file
This file is generated by Microsoft SQL Server version 9.00.1399.06 upon detection of fatal unexpected error. Please return this file, the query or program that produced the bugcheck, the database and the error log, and any other pertinent information with a Service Request.
Team I keep getting this error every so often in the SQL Server(2005.90.3054.00). 2005/SP2/Hot Fixes. Windows Server 2003 SP2. I have researched the web, every one seems to have the same question and nobody seems to have an answer. This somehow does not show up in the Profiler. The apps work normally too. It is a huge eye sore in the LOGs. ================= BugCheck Dump =================
This file is generated by Microsoft SQL Server version 9.00.3054.00 upon detection of fatal unexpected error. Please return this file, the query or program that produced the bugcheck, the database and the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE. Bios Version is COMPAQ - 2 Current time is 15:52:36 09/27/07. 8 Intel x86 level 15, 2694 Mhz processor (s). Windows NT 5.2 Build 3790 CSD Service Pack 2.
Thanks for your help in advance. Paresh Motiwala EDS, Boston, USA The other half of the error message is in the second message of the same thread below.
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM Log Database Mail (Database Mail Log)
Log ID 402 Process ID 3936 Last Modified 2/2/2007 8:35:00 AM Last Modified By NT AUTHORITYSYSTEM
Message 1) Exception Information =================== Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException Message: Could not retrieve item from the queue. Data: System.Collections.ListDictionaryInternal TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession) HelpLink: NULL Source: DatabaseMailEngine
StackTrace Information =================== at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db) at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client. Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
How are you. i hope you all are having fun. well i have an issue on one of the production box. Version of the box: Microsoft SQL Server 2000 - 8.00.2187 (Intel X86) Mar 9 2006 11:38:51 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
As per SQL serve logs which i received couple of times. step 1) Using 'dbghelp.dll' version '4.0.5' *Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump0173.txt 2) SqlDumpExceptionHandler: Process 3920 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. 3) Stack Signature for the dump is 0xC578316D
when i searched in google and msdn i could not found the exact solution. if you guys have the knowledge and also got experianced about this issue. kindly please help me in this regards and one more thing i just want to inform you all this is our production server. I think you would understantd how criticality is this.
I really appreciate for your feedback. thank you so much,
Raghu
for the 2nd step it is haing a very huge message. so here i have pasted some part of the message. i think this is more then enough for you all.
Hello, The Database Mail feature is already enabled on the server, also I have a mail account on the other server. The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ? Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account? The mail should be sent from my SQL Server. Thank You.
