I want to write a sql query for information from a table in different database but on the same server.
what is the syntax.
select * from databse2.owner.table ??
i am in application1 database and i want to query from application2 database on the same server.
use application1
go
Select * from application2.dbo.tablename
go
Is this query correct?
Pardon the possibly senseless question - I have been an NT Administrator for some years, and have just gotten thrown into picking up some SQL DBA work and I'm still feeling my way around.
Is it possible to query the Master database for the setup information (etc) on the other databases? Several have been marked suspect due to a hard drive failure and I am trying to figure out what the original setup of the databases was.
Thanks,
Mary Elizabeth
NW Natural
I'am doing functionality test on DTS packages and saving my DTS packages to meta data services instead of saving them as local packages. We would like to see what information would be provided by saving them this way, but when we try to open the meta data browser (the 3rd icon under DTS) we get the following error:
An error occurred while trying to access the database information. The msdb database could not be opened.
I actually work in an organisation and we have to find a solution about the data consistancy in the database. our partners use to send details to the organisation and inserted directly in the database, so we want to create a new database as a buffer database to insert informations from the partners then make an update to the main database. is there a better solution instead of that?
View 6 Replies View Relateddoes any one has a query which gives, how often the job runs in a day?
Thanks for your help.
Hi all,
I have a table, three records of which look like this:
ID PersonID FirstName LastName PostCode
1 999 Barry White BW13 8GS
2 999 <null> <null> BW13 9GS
3 999 <null> Whites <null>
Both these records refer to the same "person". The records with ID of 2 and 3 represent updates to the record with an ID of 1. The problem is, only the updated data (along with the personID) is represented in records 2 and 3. I need to write query that will return a single record that looks like this:
PersonID FirstName LastName PostCode
999 Barry Whites BW13 9GS
in other words, the most recent information we have for that person.
Does anyone have any ideas? I'd be very grateful as this is proving to be a real pain in the butt!
Kind regards,
macca
Hello All,Could someone help provide a query that I can run todetermine the primary key and unique columns for anygiven table ?Thanks in Advance,Akintoye
View 1 Replies View RelatedHi,I was just helping a coworker optimize a query. He had two versions:one which used UNION for each value for which he was tallying resultsand another query which used GROUP BY. Here is an aproximation of whatthey were:Query #1:---------SELECT 12 AS [Row],ISNULL(SUM(CASE WHEN T.my_date BETWEEN @week_start_date ANDDATEADD(d, 1, @week_start_date) THEN 1 ELSE 0 END), 0) AS [Monday],ISNULL(SUM(CASE WHEN T.my_date BETWEEN DATEADD(d, 1,@week_start_date) AND DATEADD(d, 2, @week_start_date) THEN 1 ELSE 0END), 0) AS [Tuesday]FROM My_Table TINNER JOIN Another_Table T2 ON T2.col1 = T.col1WHERE T.my_date BETWEEN @week_start_date AND @week_end_dateAND T.col2 = 5UNIONSELECT 13 AS [Row],ISNULL(SUM(CASE WHEN T.my_date BETWEEN @week_start_date ANDDATEADD(d, 1, @week_start_date) THEN 1 ELSE 0 END), 0) AS [Monday],ISNULL(SUM(CASE WHEN T.my_date BETWEEN DATEADD(d, 1,@week_start_date) AND DATEADD(d, 2, @week_start_date) THEN 1 ELSE 0END), 0) AS [Tuesday]FROM My_Table TINNER JOIN Another_Table T2 ON T2.col1 = T.col1WHERE T.my_date BETWEEN @week_start_date AND @week_end_dateAND T.col2 = 6Query #2:---------SELECT R.row_num AS [Row],ISNULL(SUM(CASE WHEN T.my_date BETWEEN @week_start_date ANDDATEADD(d, 1, @week_start_date) THEN 1 ELSE 0 END), 0) AS [Monday],ISNULL(SUM(CASE WHEN T.my_date BETWEEN DATEADD(d, 1,@week_start_date) AND DATEADD(d, 2, @week_start_date) THEN 1 ELSE 0END), 0) AS [Tuesday]FROM My_Table TINNER JOIN Another_Table T2 ON T2.col1 = T.col1INNER JOIN Report_Rows R ON R.col2 = T.col2WHERE T.my_date BETWEEN @week_start_date AND @week_end_dateGROUP BY ALL R.row_numORDER BY R.row_numThe Report_Rows table in this case would have had two rows mapping row12 to a column value of 5 and row 13 to a column value of 6. Thesecond query was performing horribly until I noticed the ALL keywordin the GROUP BY, which I didn't think was necessary. When I removedthat it performed more like I expected it to perform.Before I had noticed that I was scouring over the query plans andcouldn't figure out why in one instance the query optimizer chose tojoin My_Table and Another_Table, yet when the ALL keyword was there itchose to return all of the records from Another_Table (a rather largetable) and join it to the Report_Rows table before then joining toMy_Table, which had the date criteria in the WHERE clause.So, if you've read this far without giving up...1. Why would the ALL keyword cause this? I understand thefunctionality of ALL, but I still don't see why that caused thereordering of the joins.2. (more importantly) Are there any good resources that you know ofthat explain how the query optimizer choices its query paths? Do the"Inside SQL Server" books go into that much detail? Any good onlineresources?Thanks!-Tom.
View 3 Replies View RelatedHello.
Is there any possibility in SQL server 2005 to find out the source of some sql-query result? I need some kind of meta information about result I got. For example:
[if query is]
select
t1.id as id1,
t2.id as id2,
67 as col67
from t1, t2
[result will be]
| id1 | id2 | col67 | .......................
and at the end of all I need something like :
id1-from t1.id; id2-from t2.id; col67-unknown;
thanks for help
HI, i work on Sql Developer Edition when i select for any Company name in arabic it does not get any data ,why? although my data are inserted by arabic language,please help me asap,thank youand my code like this use todayselect CatID from dbo.tbl_Categories where CatName like '%اتصالات%'
View 11 Replies View RelatedI am trying to pull information about all the user created stored procedures in a database with a query. I have successfully pulled all the procs with parameters, but I want to result set to also contain the stored procedures without parameters. I can't quite get it. Any help would be appreciated:
SELECT procs.name as ProcName,
params.name as ParameterName,
types.name as ParamType,
params.max_length,
params.precision,
params.scale,
params.is_output
FROM sys.procedures procs
LEFT OUTER JOIN sys.all_parameters params
ON procs.object_id = params.object_id
LEFT OUTER JOIN sys.types types
ON params.system_type_id = types.system_type_id
WHERE params.user_type_id = types.user_type_id
AND procs.is_ms_shipped = 0
ORDER BY procname,
params.parameter_id
I'm having a weird problem with an easy process. I have a section that allows people to enter their name and email address if they wish to be contacted. I have it set up so that when they enter that information into the text boxes, the info is then sent to my SQL database. The code looks right to me, but it never comes up. Here is the code I have for the button_click.
Dim NTAdatasource As New SqlDataSource()
NTAdatasource.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString()
NTAdatasource.InsertCommandType = SqlDataSourceCommandType.Text
NTAdatasource.InsertCommand = "INSERT into ContactUs (YourName, EmailAddress, DateTimeStamp) VALUES (@YourName, @EmailAddress, @DateTimeStamp)"
NTAdatasource.InsertParameters.Add("YourName", txtYourName.Text)
NTAdatasource.InsertParameters.Add("EmailAddress", txtEmailAddress.Text)
NTAdatasource.InsertParameters.Add("DateTimeStamp", DateTime.Now)
Dim RowsAdded As Integer = 0
Try
RowsAdded = NTAdatabase.Insert()
Catch ex As Exception
Server.Transfer("problem.aspx")
End Try
If RowsAdded <> 1 Then
Server.Transfer("problem.aspx")
Else
Server.Transfer("success.aspx")
End If
End Sub
The strange thing is that when I debug, the "rowsadded" value comes up to 1. The process runs through debugging just fine and redirects me to my "success.aspx" page. What am I doing wrong?
Thanks
I work with multiple servers and I have system administrator rights on all server. My question is, why on some server when I click on a database it shows the General, Table & Index, Space Allocated tool bar, than if I go to a different server, click a database it does not show? I would like to see this toolbar on all my servers when I click a database.
Thanks Reggie
Hello,I am trying to use the SQl Server database reporting tools to create areport on the database to find areas for optimization including tableformats, column formats, and sizes. Can anybody please help me withthis. If any body has used any other tool by which I can create abovementioned reports plz do let me know. I will be really thankful foryour help.ThanksSuneel
View 1 Replies View RelatedI have a serious problem with either SQL Server or SQL Reporting Services. I have 7 tables in a database that are relational. I have created serveral reports against this database. Last week when I pulled one of the reports, I was missing information on one of the cells. The reason why I know this is because my boss has us verify the report against the database. That took about an hour to complete. When we found that the report was not correct I repulled the report and the cell that was empty, was now populated. What gives? This is the same report I have pulled for the last month and had no problems until now. Is there a time issue involved between the last update to the database to the time I pull the report? Or maybe there is something wrong with the query?
SELECT Lease.[Lease #], MineralContacts.[Mineral Owner First Name], MineralContacts.[Mineral Owner Last Name], Tract.County, Tract.[Tract Number],
Tract.[Tract Description], Tract.Section, Tract.Block, Tract.Survey, Tract.Abstract, Lease.[Lease Date], Tract.[Title Check Though], Tract.[2ndTitleReview],
Tract.[2nd R/S Complete], Tract.[Title Agent], Tract.[Tract Gross Acres], SubTract.[Tract Net Acres], Draft.[Draft Status], Draft.[Draft Due Date],
Draft.[Draft Amount], Draft.[Draft #], Draft.[ANB Invoice #], Draft.[Lse File Sent to CP], Draft.[Money Wired from CP to EA],
Draft.[STA Approved Draft for pmt], Draft.[STA Recommend to Return Daft], Draft.[KE Advised ANB to Pay Draft], Draft.[KE Advised ANB to Return Draft],
Draft.[Paid Draft Recd], SubTract.Comments, SubTract.Hide
FROM Tract INNER JOIN
SubTract ON Tract.TractID = SubTract.TractID INNER JOIN
Mineral ON SubTract.SubTractID = Mineral.SubTractID INNER JOIN
Lease ON Mineral.MineralID = Lease.MineralID INNER JOIN
Draft ON Lease.LeaseID = Draft.LeaseID INNER JOIN
MineralContacts ON Mineral.MineralID = MineralContacts.MineralID
WHERE (Draft.[Draft Status] IS NOT NULL) AND (Draft.[Draft Due Date] IS NOT NULL)
I have a SQL query I need to design to select name and email addressesfor policies that are due and not renewed in a given time period. Theproblem is, the database keeps the information for every renewal inthe history of the policyholder.The information is in 2 tables, policy and customer, which share thecustid data. The polno changes with every renewal Renewals in 2004would be D, 2005 S, and 2006 L. polexpdates for a given customer couldbe 2007-03-21, 2006-03-21, 2005-03-21, and 2004-09-21, with polno of1234 (original policy), 1234D (renewal in 2004), 1234S (renewal in2005), and 1235L (renewed in 2006).The policy is identified in trantype as either 'rwl' for renewal, or'nbs' for new business.The policies would have poleffdates of 2004-03-21 (original 6 monthpolicy) 2004-09-21 (first 6 month renewal) , 2005-03-21 (2nd renewal,1 year), 2006-03-21(3rd renewal, 1 yr).I want ONLY THE LATEST information, and keep getting earlyinformation.My current query structure is:select c.lastname, c.email, p.polno, p.polexpdatefrom policy p, customer cwhere p.polid = c.polidand p.polexpdate between '2006-03-01 and 2006-03-31and p.polno like '1234%s'and p.trantype like 'rwl'and c.email is not nullunionselect c.lastname, c.email, p.polno, p.polexpdatefrom policy p, customer cwhere p.polid = c.polidand p.polexpdate between '2006-03-01 and 2006-03-31and p.polno like '1234%'and p.trantype like 'nbs'and c.email is not nullHow do I make this query give me ONLY the polno 123%, or 123%Sinformation, and not give me the information on policies that ALSOhave 123%L policies, and/ or renewal dates after 2006-03-31?Adding a 'and not polexpdate > 2006-03-31' does not work.I am working with SQL SERVER 2003. Was using SQL Server 7, but foundit was too restrictive, and I had a valid 2003 licence, so I upgraded,and still could not do it (after updating the syntax - things likeusing single quotes instead of double, etc)I keep getting those policies that were due in the stated range andHAVE been renewed as well as those which have not. I need to get onlythose which have NOT been renewed, and I cannot modify the database inany way.*** Free account sponsored by SecureIX.com ****** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
View 24 Replies View RelatedIf I had a bunch of paragraphs stored in a database field, is there a way, when displaying that data, that I can write instructions to only retrieve the very first paragraph?
View 4 Replies View RelatedThis is probably a very simple question but i am having problems with inserting information into database
The function takes the values "FirstName" And "LastName" from A table Called "Customer" and the value "ProductID" from a table called "Products" and inserts them into a table called " NewOrder".
Everything compiles ok but when I press the button the information is not uploaded to thedatabase. ( There is no error message)
This is the stored procedure
CREATE PROCEDURE SP_NewOrder(@CartID char (36), @CustomerID Varchar (50))AS
INSERT INTO NewOrder (FirstName, LastName, ProductID)
SELECT Customer.FirstName, Customer.LastName, Products.ProductID
From Customer,Products Join ShoppingCart ON Products.ProductID =ShoppingCart.ProductIDWHERE ShoppingCart.CartID = @CartID AND Customer.CustomerID = @CustomerIDGO
This is the Function
Public Shared Function CreateOrder() AS String Dim customerID As integer Dim connection as New SqlConnection(connectionString) Dim command as New SqlCommand("SP_NewOrder",connection) command.CommandType = CommandType.StoredProcedure command.Parameters.Add("@CartID", SqlDbType.Char,36) command.Parameters("@CartID").Value = shoppingCartID command.Parameters.Add("@CustomerID", SqlDbType.Varchar,36) command.Parameters("@CustomerID").Value = customerID Try
connection.Open() command.ExecuteNonQuery() Finally connection.Close()
End TryEnd Function
This is the page code
Sub btn3_Click(sender As Object, e As EventArgs)Dim cart as New ShoppingCart()Dim shoppingCartID As IntegerDim customerID As Integer = Context.Session("worldshop_CustomerID")cart.CreateOrder()End Sub
Can Anyone see where I am going wrong
Many thanks
martin
I would like to know how to (if it is at all possible) in SQL (or even ADO) to retrieve all the data concerning database X's
a) Tables
b) Tables column names
c) Tables column's data types
I don't want to use the doa.tabledefs object.. .i would prefer to do it in SQL, but using ADO objects (since I am developing stuff in VB) would be ok too.
Please Help.. i have been going crazy trying to find anything useful.. email me back please!
Thanks,
Matt
Hi,
I want to get information about all the indexes in a database.
Can any one suggest me a query for this.
Thanks.
Hi,
I ´d like to know if there is any way to access an Informix database from sqlserver 2005.
We are trying to build a data warehouse in SS2005, and I want to know If I could avoid the generation of hundreds of flats files from Informix and loading them into SS2005, directly recovering all information from SS2005 across any kind of migration or connection.
Any help would be very appreciated
Regards.
Hi,
I need to provide a report that lists the databases in each instance, then the tablenames and the number of rows in each table.
Is there any easy way to do this in SQL 2005?
Cheers
Gregg
This script gets the file information for every database on a server, and inserts it into temp table #DB_INFO. #DB_INFO is queried multiple ways to give various levels of analysis of file space usage.
This script was tested on SQL Server 7.0, 2000, and 2005.
Edit 2007/9/7: Added FILEGROUP_TYPE and DISK columns.
Edit 2007/9/17: Modified to add various ways to analyze the output and format it to make it easier to understand space usage on the server:
Show Files Details
Total by Database and File
Total by Database and Filegroup
Total by Database and Filegroup Type
Total by Disk, Database, and Filepath
Total by Disk and Database
Total by Database
Edit 2007/9/17: Modified to make the changes suggested by eyechart. I managed to defeat Snitz to get rid of the smiley face () and still have executable code by putting in some extra quotes around the database name.
use master
go
if exists ( select * from tempdb.dbo.sysobjects o
where o.xtype in ('U') and o.id = object_id( N'tempdb..#DB_FILE_INFO' ))
drop table #DB_FILE_INFO
go
if exists ( select * from tempdb.dbo.sysobjects o
where o.xtype in ('U') and o.id = object_id( N'tempdb..#DB_INFO' ))
drop table #DB_INFO
go
set nocount on
go
create table #DB_FILE_INFO (
[ID]intnot null
identity (1, 1) primary key clustered ,
[DATABASE_NAME]sysnamenot null ,
[FILEGROUP_TYPE]nvarchar(4)not null ,
[FILEGROUP_ID]smallintnot null ,
[FILEGROUP]sysnamenot null ,
[FILEID]smallintnot null ,
[FILENAME]sysnamenot null ,
[DISK]nvarchar(1)not null ,
[FILEPATH]nvarchar(260)not null ,
[MAX_FILE_SIZE]intnull ,
[FILE_SIZE]intnot null ,
[FILE_SIZE_USED]intnot null ,
[FILE_SIZE_UNUSED]intnot null ,
[DATA_SIZE]intnot null ,
[DATA_SIZE_USED]intnot null ,
[DATA_SIZE_UNUSED]intnot null ,
[LOG_SIZE]intnot null ,
[LOG_SIZE_USED]intnot null ,
[LOG_SIZE_UNUSED]intnot null ,
)
go
declare @sqlnvarchar(4000)
set @sql =
'use ['+'?'+'] ;
if db_name() <> N''?'' goto Error_Exit
insert into #DB_FILE_INFO
(
[DATABASE_NAME],
[FILEGROUP_TYPE],
[FILEGROUP_ID],
[FILEGROUP],
[FILEID],
[FILENAME],
[DISK],
[FILEPATH],
[MAX_FILE_SIZE],
[FILE_SIZE],
[FILE_SIZE_USED],
[FILE_SIZE_UNUSED],
[DATA_SIZE],
[DATA_SIZE_USED],
[DATA_SIZE_UNUSED],
[LOG_SIZE],
[LOG_SIZE_USED],
[LOG_SIZE_UNUSED]
)
selecttop 100 percent
[DATABASE_NAME] = db_name(),
[FILEGROUP_TYPE]= case when a.groupid = 0 then ''Log'' else ''Data'' end,
[FILEGROUP_ID]= a.groupid,
a.[FILEGROUP],
[FILEID]= a.fileid,
[FILENAME]= a.name,
[DISK]= upper(substring(a.filename,1,1)),
[FILEPATH]= a.filename,
[MAX_FILE_SIZE] =
convert(int,round(
(case a.maxsize when -1 then null else a.maxsize end*1.000)/128.000
,0)),
[FILE_SIZE]= a.[fl_size],
[FILE_SIZE_USED] = a.[fl_used],
[FILE_SIZE_UNUSED] = a.[fl_unused],
[DATA_SIZE]= case when a.groupid <> 0 then a.[fl_size] else 0 end,
[DATA_SIZE_USED]= case when a.groupid <> 0 then a.[fl_used] else 0 end,
[DATA_SIZE_UNUSED] = case when a.groupid <> 0 then a.[fl_unused] else 0 end,
[LOG_SIZE] = case when a.groupid = 0 then a.[fl_size] else 0 end,
[LOG_SIZE_USED] = case when a.groupid = 0 then a.[fl_used] else 0 end,
[LOG_SIZE_UNUSED] = case when a.groupid = 0 then a.[fl_unused] else 0 end
from
(
Select
aa.*,
[FILEGROUP]= isnull(bb.groupname,''''),
-- All sizes are calculated in MB
[fl_size]=
convert(int,round((aa.size*1.000)/128.000,0)),
[fl_used]=
convert(int,round(fileproperty(aa.name,''SpaceUsed'')/128.000,0)),
[fl_unused]=
convert(int,round((aa.size-fileproperty(aa.name,''SpaceUsed''))/128.000,0))
from
dbo.sysfiles aa
left join
dbo.sysfilegroups bb
on ( aa.groupid = bb.groupid )
) a
order by
case when a.groupid = 0 then 0 else 1 end,
a.[FILEGROUP],
a.name
Error_Exit:
'
--print @sql
exec sp_msforeachdb @sql
--select * from #DB_FILE_INFO
declare @DATABASE_NAME_LENvarchar(20)
declare @FILEGROUP_LENvarchar(20)
declare @FILENAME_LENvarchar(20)
declare @FILEPATH_LENvarchar(20)
select
@DATABASE_NAME_LEN= convert(varchar(20),max(len(rtrim(DATABASE_NAME)))),
@FILEGROUP_LEN= convert(varchar(20),max(len(rtrim(FILEGROUP)))),
@FILENAME_LEN= convert(varchar(20),max(len(rtrim(FILENAME)))),
@FILEPATH_LEN= convert(varchar(20),max(len(rtrim(FILEPATH))))
from
#DB_FILE_INFO
if object_id('tempdb..##DB_Size_Info_D115CA380E2B4538B6CBBB51') is not null
begin
drop table ##DB_Size_Info_D115CA380E2B4538B6CBBB51
end
-- Setup code to reduce column sizes to max used
set @sql =
'
select
[DATABASE_NAME]= convert(varchar('+@DATABASE_NAME_LEN+'), a.[DATABASE_NAME] ),
a.[FILEGROUP_TYPE],
[FILEGROUP_ID],
[FILEGROUP]= convert(varchar('+@FILEGROUP_LEN+'), a.[FILEGROUP]),
[FILEID],
[FILENAME]= convert(varchar('+@FILENAME_LEN+'), a.[FILENAME] ),
a.[DISK],
[FILEPATH]= convert(varchar('+@FILEPATH_LEN+'), a.[FILEPATH] ),
a.[MAX_FILE_SIZE],
a.[FILE_SIZE],
a.[FILE_SIZE_USED],
a.[FILE_SIZE_UNUSED],
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when a.[FILE_SIZE] is null or a.[FILE_SIZE] = 0
then NULL
else (100.00000*a.[FILE_SIZE_USED])/(1.00000*a.[FILE_SIZE])
end ,1)) ,
a.[DATA_SIZE],
a.[DATA_SIZE_USED],
a.[DATA_SIZE_UNUSED],
a.[LOG_SIZE],
a.[LOG_SIZE_USED],
a.[LOG_SIZE_UNUSED]
into
##DB_Size_Info_D115CA380E2B4538B6CBBB51
from
#DB_FILE_INFO a
order by
a.[DATABASE_NAME],
case a.[FILEGROUP_ID] when 0 then 0 else 1 end,
a.[FILENAME]
'
--print @sql
exec ( @sql )
selecttop 100 percent
*
into
#DB_INFO
from
##DB_Size_Info_D115CA380E2B4538B6CBBB51 a
order by
a.[DATABASE_NAME],
case a.[FILEGROUP_ID] when 0 then 0 else 1 end,
a.[FILENAME]
drop table ##DB_Size_Info_D115CA380E2B4538B6CBBB51
set nocount off
print 'Show Details'
select * from #DB_INFO
print 'Total by Database and File'
select
[DATABASE_NAME]= isnull([DATABASE_NAME],' All Databases'),
[FILENAME]= isnull([FILENAME],''),
FILE_SIZE= sum(FILE_SIZE),
FILE_SIZE_USED= sum(FILE_SIZE_USED),
FILE_SIZE_UNUSED= sum(FILE_SIZE_UNUSED),
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when sum(a.[FILE_SIZE]) is null or sum(a.[FILE_SIZE]) = 0
then NULL
else (100.00000*sum(a.[FILE_SIZE_USED]))/(1.00000*sum(a.[FILE_SIZE]))
end ,1)) ,
DATA_SIZE= sum(DATA_SIZE),
DATA_SIZE_USED= sum(DATA_SIZE_USED),
DATA_SIZE_UNUSED= sum(DATA_SIZE_UNUSED),
LOG_SIZE= sum(LOG_SIZE),
LOG_SIZE_USED= sum(LOG_SIZE_USED),
LOG_SIZE_UNUSED= sum(LOG_SIZE_UNUSED)
from
#DB_INFO a
group by
[DATABASE_NAME],
[FILENAME]
with rollup
order by
case when [DATABASE_NAME] is null then 1 else 0 end ,
[DATABASE_NAME],
case when [FILENAME] is null then 1 else 0 end ,
[FILENAME]
print 'Total by Database and Filegroup'
select
--[Server]= convert(varchar(15),@@servername),
[DATABASE_NAME]= isnull([DATABASE_NAME],'** Total **'),
[FILEGROUP]=
case when [FILEGROUP] is null then '' when [FILEGROUP] = '' then 'LOG' else [FILEGROUP] end,
FILE_SIZE= sum(FILE_SIZE),
FILE_SIZE_USED= sum(FILE_SIZE_USED),
FILE_SIZE_UNUSED= sum(FILE_SIZE_UNUSED),
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when sum(a.[FILE_SIZE]) is null or sum(a.[FILE_SIZE]) = 0
then NULL
else (100.00000*sum(a.[FILE_SIZE_USED]))/(1.00000*sum(a.[FILE_SIZE]))
end ,1)) ,
--MAX_SIZE= SUM([MAX_FILE_SIZE]),
DATA_SIZE= sum(DATA_SIZE),
DATA_SIZE_USED= sum(DATA_SIZE_USED),
DATA_SIZE_UNUSED= sum(DATA_SIZE_UNUSED),
LOG_SIZE= sum(LOG_SIZE),
LOG_SIZE_USED= sum(LOG_SIZE_USED),
LOG_SIZE_USED= sum(LOG_SIZE_UNUSED)
from
#DB_INFO A
group by
[DATABASE_NAME],
[FILEGROUP]
with rollup
order by
case when [DATABASE_NAME] is null then 1 else 0 end ,
[DATABASE_NAME],
case when [FILEGROUP] is null then 10 when [FILEGROUP] = '' then 0 else 1 end ,
[FILEGROUP]
print 'Total by Database and Filegroup Type'
select
--[Server]= convert(varchar(15),@@servername),
[DATABASE_NAME]= isnull([DATABASE_NAME],'** Total **'),
[FILEGROUP_TYPE]= isnull([FILEGROUP_TYPE],''),
FILE_SIZE= sum(FILE_SIZE),
FILE_SIZE_USED= sum(FILE_SIZE_USED),
FILE_SIZE_UNUSED= sum(FILE_SIZE_UNUSED),
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when sum(a.[FILE_SIZE]) is null or sum(a.[FILE_SIZE]) = 0
then NULL
else (100.00000*sum(a.[FILE_SIZE_USED]))/(1.00000*sum(a.[FILE_SIZE]))
end ,1)) ,
DATA_SIZE= sum(DATA_SIZE),
DATA_SIZE_USED= sum(DATA_SIZE_USED),
DATA_SIZE_UNUSED= sum(DATA_SIZE_UNUSED),
LOG_SIZE= sum(LOG_SIZE),
LOG_SIZE_USED= sum(LOG_SIZE_USED),
LOG_SIZE_USED= sum(LOG_SIZE_UNUSED)
from
#DB_INFO A
group by
[DATABASE_NAME],
[FILEGROUP_TYPE]
with rollup
order by
case when [DATABASE_NAME] is null then 1 else 0 end ,
[DATABASE_NAME],
case when [FILEGROUP_TYPE] is null then 10 when [FILEGROUP_TYPE] = 'Log' then 0 else 1 end
print 'Total by Disk, Database, and Filepath'
select
[DISK]= isnull([DISK],''),
[DATABASE_NAME]= isnull([DATABASE_NAME],''),
[FILEPATH]= isnull([FILEPATH],''),
FILE_SIZE= sum(FILE_SIZE),
FILE_SIZE_USED= sum(FILE_SIZE_USED),
FILE_SIZE_UNUSED= sum(FILE_SIZE_UNUSED),
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when sum(a.[FILE_SIZE]) is null or sum(a.[FILE_SIZE]) = 0
then NULL
else (100.00000*sum(a.[FILE_SIZE_USED]))/(1.00000*sum(a.[FILE_SIZE]))
end ,1)) ,
DATA_SIZE= sum(DATA_SIZE),
DATA_SIZE_USED= sum(DATA_SIZE_USED),
DATA_SIZE_UNUSED= sum(DATA_SIZE_UNUSED),
LOG_SIZE= sum(LOG_SIZE),
LOG_SIZE_USED= sum(LOG_SIZE_USED),
LOG_SIZE_UNUSED= sum(LOG_SIZE_UNUSED)
from
#DB_INFO a
group by
[DISK],
[DATABASE_NAME],
[FILEPATH]
with rollup
order by
case when [DISK] is null then 1 else 0 end ,
[DISK],
case when [DATABASE_NAME] is null then 1 else 0 end ,
[DATABASE_NAME],
case when [FILEPATH] is null then 1 else 0 end ,
[FILEPATH]
print 'Total by Disk and Database'
select
[DISK]= isnull([DISK],''),
[DATABASE_NAME]= isnull([DATABASE_NAME],''),
FILE_SIZE= sum(FILE_SIZE),
FILE_SIZE_USED= sum(FILE_SIZE_USED),
FILE_SIZE_UNUSED= sum(FILE_SIZE_UNUSED),
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when sum(a.[FILE_SIZE]) is null or sum(a.[FILE_SIZE]) = 0
then NULL
else (100.00000*sum(a.[FILE_SIZE_USED]))/(1.00000*sum(a.[FILE_SIZE]))
end ,1)) ,
DATA_SIZE= sum(DATA_SIZE),
DATA_SIZE_USED= sum(DATA_SIZE_USED),
DATA_SIZE_UNUSED= sum(DATA_SIZE_UNUSED),
LOG_SIZE= sum(LOG_SIZE),
LOG_SIZE_USED= sum(LOG_SIZE_USED),
LOG_SIZE_USED= sum(LOG_SIZE_UNUSED)
from
#DB_INFO a
group by
[DISK],
[DATABASE_NAME]
with rollup
order by
case when [DISK] is null then 1 else 0 end ,
[DISK],
case when [DATABASE_NAME] is null then 1 else 0 end ,
[DATABASE_NAME]
print 'Total by Disk'
select
[DISK]= isnull([DISK],''),
FILE_SIZE= sum(FILE_SIZE),
FILE_SIZE_USED= sum(FILE_SIZE_USED),
FILE_SIZE_UNUSED= sum(FILE_SIZE_UNUSED),
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when sum(a.[FILE_SIZE]) is null or sum(a.[FILE_SIZE]) = 0
then NULL
else (100.00000*sum(a.[FILE_SIZE_USED]))/(1.00000*sum(a.[FILE_SIZE]))
end ,1)) ,
DATA_SIZE= sum(DATA_SIZE),
DATA_SIZE_USED= sum(DATA_SIZE_USED),
DATA_SIZE_UNUSED= sum(DATA_SIZE_UNUSED),
LOG_SIZE= sum(LOG_SIZE),
LOG_SIZE_USED= sum(LOG_SIZE_USED),
LOG_SIZE_USED= sum(LOG_SIZE_UNUSED)
from
#DB_INFO a
group by
[DISK]
with rollup
order by
case when [DISK] is null then 1 else 0 end ,
[DISK]
print 'Total by Database'
select
--[Server]= convert(varchar(20),@@servername),
[DATABASE_NAME]= isnull([DATABASE_NAME],'** Total **'),
FILE_SIZE= sum(FILE_SIZE),
FILE_SIZE_USED= sum(FILE_SIZE_USED),
FILE_SIZE_UNUSED= sum(FILE_SIZE_UNUSED),
FILE_USED_PCT=
convert(numeric(5,1),round(
case
when sum(a.[FILE_SIZE]) is null or sum(a.[FILE_SIZE]) = 0
then NULL
else (100.00000*sum(a.[FILE_SIZE_USED]))/(1.00000*sum(a.[FILE_SIZE]))
end ,1)) ,
DATA_SIZE= sum(DATA_SIZE),
DATA_SIZE_USED= sum(DATA_SIZE_USED),
DATA_SIZE_UNUSED= sum(DATA_SIZE_UNUSED),
LOG_SIZE= sum(LOG_SIZE),
LOG_SIZE_USED= sum(LOG_SIZE_USED),
LOG_SIZE_UNUSED= sum(LOG_SIZE_UNUSED)
from
#DB_INFO A
group by
[DATABASE_NAME]
with rollup
order by
case when [DATABASE_NAME] is null then 1 else 0 end ,
[DATABASE_NAME]
CODO ERGO SUM
Hi All,
I've written a scalar function in C# for the MS SQL Server 2005 that has to have access to two databases in one instance of a server ("database1" and "database2"). I got information from database1, calculate the name of the database2 and got information from user's tables in the database2. But when I'm trying to get informatin from "sys.tables", "sys.columns", "sysobjects" I always get an error "System.Data.SqlClient.SqlException: This statement has attempted to access data whose access is restricted by the assembly."
All databases are inside one server, I can run this quieries in SQL Server management Studio - could anybody help me what should I set/change to get metainformation from another database in the same server (in fact I need a list of fields of a curtain table).
Thanks,
Alex Gerasimov
P.S. Atrribute [SqlFunction(DataAccess = DataAccessKind.Read)] is in the applicaiton.
I have a query where I am trying to display the most recent information about travelling method of customers using "t.collection_date". I am struggling to get MAX function working in the query.
SELECTÂ P.id, P.forename, P.surname, P.dob, c.postcode, l.code_des, MAX(t.collection_date)
FROMÂ Â Â People p,
               MOT_HIST t,
        lk_mode_of_travel l,
               corresp_address c
WHERE  p.ID = t.id (+)
ANDÂ Â Â Â Â Â t.mode_of_travel = l.int_code (+)
AND       p.id = c.entity_id (+)
Hello,
I am trying to write a query that will be able to select different segments of data based on spelling of the last name.
For example, in my database of name information, I need to select anyone whose last name starts with 'AAA' to 'EJJ'
then need to select anyone whose last name starts with 'EJK' to 'JAE' and so on...
I have tried using LIKE and some other methods with the > operator, but I can't get it to work. Does anyone have any suggestions or ideas on how to select data based on the alphanumeric characters this way?
Thanks
Hello,
I'm building an ecommerce website which requires customers to create an account before they go ahead with a purchase. I have a createaccount.aspx page in Visual Web Developer 2005 with text boxes where users can enter their details (email, password, name and address). I'm trying to insert the information which users type into the text boxes into an SQL database table called Customers.
I've dragged and dropped an SQL data source onto my page and have set it to operate on my AddCustomer stored procedure. I've confirgured my data source such that the parameter for each field in the database is set to the appropriate control on the webpage (for example the Email parameter source is "textboxEmail").
I've also placed a button onto my page so that the button click event can act as the trigger for sending the information in the text boxes to the database. I wasn't totally sure how to write code for the button click event such that when the button is clicked, the INSERT stored procedure runs. At the moment I'm using:
Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
SqlDataSource1.Insert()
End Sub
When I try to run my application I'm getting an error which reads:
Cannot insert the value NULL into column 'Email', table 'C:DOCUMENTS AND SETTINGSLUKE JACKSONMY DOCUMENTSVISUAL STUDIO 2005WEBSITESJACKSONSNURSERIESAPP_DATADATABASE.MDF.dbo.Customers'; column does not allow nulls. INSERT fails.The statement has been terminated.
The error message implies that I haven't set the necessary parameters correctly but I really don't know where I'm going wrong!
The code I'm using for my stored procedure is as follows:
ALTER PROCEDURE AddCustomer
(
@CustomerID int,
@Email nvarchar(50),
@Password nvarchar(MAX),
@Name nvarchar(50),
@Address1 nvarchar(50),
@Address2 nvarchar(50),
@Address3 nvarchar(50),
@City nvarchar(50),
@County nvarchar(50),
@PostCode nvarchar(50)
)
AS
INSERT INTO Customers
(Email, Password, Name, Address1, Address2, Address3, City, County, PostCode)
VALUES
(@Email, @Password, @Name, @Address1, @Address2, @Address3, @City, @County, @PostCode)
I'd be really grateful if anyone could help me out with this.
Thanks in advance,
Luke
p.s. just incase it helps, here's my createaccount.aspx page:
<%@ Page Language="VB" MasterPageFile="~/Master.master" AutoEventWireup="false" CodeFile="createaccount.aspx.vb" Inherits="createaccount" title="Untitled Page" %>
<%-- Add content controls here --%>
<asp:Content ID="Content1" runat="server" ContentPlaceHolderID="ContentPlaceHolder1">
<span style="text-decoration: underline"><strong>Create Account<br />
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="AddCustomer" SelectCommandType="StoredProcedure" InsertCommand="INSERT INTO Customers 	(Email, Password, Name, Address1, Address2, Address3, City, County, PostCode) 	VALUES 	(@Email, @Password, @Name, @Address1, @Address2, @Address3, @City, @County, @PostCode)">
<SelectParameters>
<asp:Parameter Name="CustomerID" Type="Int32" />
<asp:ControlParameter ControlID="textboxEmail" Name="Email" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="textboxPassword" Name="Password" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxName" Name="Name" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="textboxAddress" Name="Address1" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxAddress2" Name="Address2" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxAddress3" Name="Address3" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxCity" Name="City" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="textboxCounty" Name="County" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxPostCode" Name="PostCode" PropertyName="Text"
Type="String" />
</SelectParameters>
<InsertParameters>
<asp:Parameter Name="Email" Type="String" />
<asp:Parameter Name="Password" Type="String" />
<asp:Parameter Name="Name" Type="String" />
<asp:Parameter Name="Address1" Type="String" />
<asp:Parameter Name="Address2" Type="String" />
<asp:Parameter Name="Address3" Type="String" />
<asp:Parameter Name="City" Type="String" />
<asp:Parameter Name="County" Type="String" />
<asp:Parameter Name="PostCode" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
<br />
</strong></span>
<table style="font-weight: bold; width: 394px; text-decoration: underline">
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Email:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxEmail" runat="server" Width="147px"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Password:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxPassword" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Name:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxName" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
Address 1:</td>
<td>
<asp:TextBox ID="textboxAddress" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Address 2:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxAddress2" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
Address 3:</td>
<td>
<asp:TextBox ID="textboxAddress3" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
City:</td>
<td>
<asp:TextBox ID="textboxCity" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
County:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxCounty" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
Post Code:</td>
<td>
<asp:TextBox ID="textboxPostCode" runat="server"></asp:TextBox></td>
</tr>
</table>
<asp:Button ID="btnSubmit" runat="server" Text="Submit" />
</asp:Content>
Thanks again
Hello,
I'm trying to create a web page that is protected by a user login. I want the user data to be stored in an access database file and not an SQL Server express database.
I was following this guide on msdn:
http://msdn2.microsoft.com/en-us/library/879kf95c(VS.80).aspx
However, I was doing everything locally using a file system and not IIS. (Which seemed to work fine)
My main problem is that I cannot get the membership information stored in an access database. The only provider option was one for the SQL server express. I think I will have to make a custom provider? However, I read through some of that documentation and was equally confused. ( http://msdn2.microsoft.com/en-us/library/Aa479031.aspx )
Anyone have a solution?
I have a group of about 5 servers (which will likely grow toabout 25 in the near future) with their names listed in a table in a database on one of the servers. I want to query all servers in that table using the following query to pull the storage drive, database name, created date, age and size of the databases for each server listed in the table:
SELECT left(mf.Physical_Name,2) AS Storage_Drive,
DB_NAME(mf.database_id) AS DatabaseName,
db.create_Date,
DateDiff(day, db.create_date, getDate()) Age,
sum((mf.size*8))/1024 SizeMB
[Code] ...
How would I best accomplish this if I want to implement it using a TSQL procedure?
I am attempting to drop a database (sales), however I receive this message: Error 3274 is "Cannot drop the database 'sales' because it is published for replication." Yet, I no longer have any publications in this database. It seems that there is some orphaned information related to a publication that existed. Any help would be great.
View 2 Replies View RelatedHello there,
Im alittle stuck
what im trying to find out is:
MS SQL 2000
1. How to Generate Reports from selected Database information
2. then email that report weekly.
Ive heard about Visual Studio .NET 2003: Business Intelligence Projects
but is there away to create the reports directly in Enterprise manager?
any pointers would be great
Hi all,
While cleaning up some code, I ran across the following statement in a stored proc - the purpose of which is to determine if a table exists in the local database: SELECT * FROM dbo.sysobjects where id = object_id(N'[dbo].[XML_PRINTDATE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1of course I removed it from the IF just for testing purposes, but my quandry is this...
Why chose that select (converting table name to object ID) rather than just doing THIS:SELECT * FROM dbo.sysobjects where name = N'XML_PRINTDATE' and OBJECTPROPERTY(id, N'IsUserTable') = 1
I first thought it was to gain access to the "id" column value (and that may yet be the purpose of it), but the second code seems to work just peachy (I assume because the id column is present in the sysobjects table itself).
A follow-on question is this:
When I try to do the same check from another server (i.e.SELECT * FROM APRECEIVE1.DailyProd.dbo.sysobjects where name = N'XML_PRINTDATE' and OBJECTPROPERTY(id, N'IsUserTable') = 1) it of course fails because OBJECTPROPERTY only looks for the id on the local database.
So, do I CARE if it is a user table? (I am reasonably sure it is, of course) and if so, is there a way to check on the remote server for the object type?
Bottom line is I Think I can just simplify things and check for the object name on the remote server, but just don't want to take away any "warm fuzzy feeling" generated by the original stored proc, if such a warm fuzzy is of any benefit (though don't get me started on the relativity of warm fuzzies, I wrote my Thesis on that ;) )
I am using following sql to extract locking information in database. It only work on current selected database, how can I tune to work on all databases and not only currently selected?
SELECT DISTINCT
ES.login_name AS LoginName,
L.request_session_id AS BlockedBy_SPID,
DATEDIFF(second,At.Transaction_begin_time, GETDATE()) AS Duration_Sec,
DB_NAME(L.resource_database_id) AS DatabaseName,
[Code] ....