Hi,
I am using Sql REporting Services 2005 for viewing reports in my web application. I have to change the chart types at run time basesd on the option. User can select any chart eg. bar chart, pie chart, column chart etc. On selection screen should populate the chart type. I am not able to change chart type at runtime. Help please.
Thanks
Shraddha Tripathi
Hi ,
I am using sql reporting services 2005 for viewing my reports, Now i want to change chart type of my report according to diffrent selection, there will be pie chart, coulmn chart , bar chart or many more options resides in my web application and according to user selection , chart of that report should be change.
Please help me out.
Thanks and Regards
Shraddha Tripathi
Hi,
I am trying to create a report in report in reporting services.
The requirement is to display the data in a chart. A surface chart to be exact.
It appears that reporting services has most of the Excel type charts available to display the data but I do not see the Surface Chart type. Is this type available in SQL Server 2005 reporting services? If not, is there a 3rd party software available that integrates into BIDS?
Thanks
I have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies View RelatedWe have created a chart in SharePoint 2013 with performance point dashboard designer. We want to change Title of chart. For more information please check attached image.
View 2 Replies View RelatedI have created a linked report in which I have two screen:
First Screen: Clicking on the bar of particular country the details of that particular country should be visible (the second screen)
Second Screen: When I clicked on a bar. All the count values are very well correct. In first chart Count of values under one bar "Pending decision"(yellow) was 337 for a country and in second screen its 337 again(shown in light green bar).
<!--[if !vml]--><!--[endif]-->
Problem: My problem is to make it sure that the colors that the first screen is having for particular status (as shown in the legend) should remain same in second screen also. For example for a status say "pending decision" the chart is using yellow color, so in screen two as well it must be shown with yellow color and not with lany other color. Can anyone help me in this context. Is there any way to customize colors used by bar chart. Please note that the question is not about using appropriate color scheme(palette) the question is how to "capture/ Re-use/ customize/ pass as a parameter" the colors used by a bar chart in SQL Server 2005 Reporting Services.
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
Is it possible to change the title of a chart at run-time?
View 3 Replies View RelatedI am developing several charts with column type and sub type as stacked. There is a requirement from the users that they want an option to choose the type of chart.
Is it possible to change chart type dynamically from say Column type to Line type based on user option in front-end?
Any help will be appreciated.
Thanks in advance !!
Hello Everyone,
I have been tasked with creating a report using Reporting Services from an excel report that was wasting a lot of manual effort and time. I have searched boards and I am having the hardest time trying to find a way to do the following in Reporting Services within a Matrix:
Spring Summer Fall
2005 2006 2007 %Change 2005 2006 2007 % Change 2005 2006 2007 %Change
Reponses 219 310 410 100 100 200 300 100 2000 3000 200 -2800
FRC% 102% 103% 200% 97% 23% 25% 10% -15% 20% 32% 10% -22%
===========================================================================================
I can not find out how to do a percent change (the column in red) subtracting just the final or most right two columns of the resulting matrix columns, not an average or some other function over the entire row....
Please help, I know others have had the same issue...
Thank You,
Hello,
We are using Reporting Services 2005 with large amount of data.
Our reports displays the data in various presentation (charts, tables, Images and matrixes).
Sometimes the underline queries takes a lot of time (few algorithms implemented by SQL and few by web services).
We tried to run the reports in various scenarios and we are getting a timeout n each of the scenarios:
1. Running the report with windows application (based on Report Viewer control)
2. Running the report via subscription.
We noticed than the timeout occurs after about 20 minutes.
WE changed the following parameters:
1. The system timeout in the report server database: 60000
2. Reports execution timeout (site level): Do not timeout report execution
3. Reports execution timeout (report level):
a. Do not timeout report execution
b. A very big number
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
I noticed that the Reporting Services is taking longer to open in the morning or after a period of time in-active. My guest is that the SSRS is set to idle/stop after certain time when it is in-active state and it will take time to start the Reporting Services when it is activated. My question is how to make SSRS active all the time ie never go to "sleep". What is the Pro and Con of this approach? Thanks.
View 1 Replies View RelatedI am trying to generate a report that is basically a class list. It lists classes for a specific semester and lists them by day of the week and then by time.
If I am pulling back a dataset of all classes, how do I filter my report so as to show each set of classes appropriately (by day and by time within the day)? I tried using the Filter function on the table level, but I guess I don't get it.
My table would need to look like this:
MONDAY:
8:30 - 9:30
9:30- 11:30
11:30-1:30
classnum/prof
classnum/prof
classnum/prof
classnum/prof
classnum/prof
classnum/prof
TUESDAY:
8:30 - 9:30
9:30- 11:30
11:30-1:30
classnum/prof
classnum/prof
classnum/prof
classnum/prof
classnum/prof
classnum/prof
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
i have a Time Series mining model. I want to view the chart in Reporting Services.
Help me!!!!!!
Hi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
thanks
hey all
I am using RS 2005
I have a report with chart
parameters = value1, value2, value3, all
How can I make the chart only show when all is selected?
cheers
jewel
Hi all,
Hopefully someone can clarify for me. I'd like to use custom colors for a chart that I have created. I've seen some code examples but I'm not really sure what to do with them. I've been using reporting services for like 2 days and I don't know xml or vb script, so I apologize for the probably stupid question. Thank you in advance.
-Keith
I am trying to display a chart from a data source that runs a stored procedure. The data dislays fine in the dataset tab, however, when I try to preview the report I get the following message:
'An error occurred during local report processing. The definition of the report 'reportname' is invalid. An internal error occured on the report server. See the error log for more details'.
I have looked at the error logs, but they do not help. I am thinking that my stored procedure is pushing a limit of the chart report. If I display the same data in a table, it displays fine, it is only in a chart. As I stated, the data is displaying in the dataset grid.
Can anyone give me an idea as to what my problem might be? I have other charts that run fine, but not using a stored procedure like the one below where I am performing multiple selects.
Below is the stored procedure:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Tim Olig
-- Create date: 09/20/07
-- Description: Returns Total Stored Procedure
-- =============================================
ALTER PROCEDURE [dbo].[sp_db_ReturnsSummary]
@Date smalldatetime
AS
BEGIN
SET NOCOUNT ON;
Select rtsum.FiscalYear,rtsum.Period,
rtsum.RMAComplete_ALL,
rtsum.RMAComplete_ANO,
rtsum.RMAComplete_EXT,
rtsum.RMAComplete_FAB,
rtsum.RMAComplete_SUN,
rtsum.RMAComplete_SUP,
salessum.ShipRev
from
(SELECT
CASE WHEN datepart(YY,returns.invdate) = 1900 then 2008 else datepart(YY,Returns.Invdate) end as FiscalYear,
CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING'
WHEN len(datepart(mm, returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, returns.invdate)))
WHEN len(datepart(mm, returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, returns.invdate))) END AS Period,
"RMAComplete_ALL" = sum(returns.TotalCredit),
"RMAComplete_ANO" = sum(case when returns.respdept = 'ANODIZING DEPT' then (returns.TotalCredit) else 0 end),
"RMAComplete_EXT" = sum(case when returns.respdept = 'EXTRUSION DEPT' then (returns.TotalCredit)else 0 end),
"RMAComplete_FAB" = sum(case when returns.respdept = 'FAB' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUN" = sum(case when returns.respdept = 'SUNROOF' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUP" = sum(case when returns.respdept = 'SUPPLIER' then (returns.TotalCredit) else 0 end)
FROM [returns]
WHERE invfiscalyear = 1990 or returns.invdate >= @Date
group by datepart(YY,Returns.Invdate), CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING' WHEN len(datepart(mm, Returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, Returns.invdate))) WHEN len(datepart(mm, Returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, Returns.invdate))) END)
as rtsum
left outer join
(select
datepart(YY,transdate) as FiscalYear,
CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm,transdate)))
WHEN len(datepart(mm,transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm,transdate))) END AS Period,
"ShipRev" = sum(case when (OrderType = 'Invoiced' or OrderType = 'ToBeInvoiced') and SalesAcctDesc = 'Sales' then Revenue else 0 end)
FROM sforep where transdate >= @Date
group by datepart(YY,transdate), CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, transdate))) WHEN len(datepart(mm, transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, transdate))) END)
as salessum
on rtsum.fiscalyear = salessum.fiscalyear and rtsum.period = salessum.period
END
Thanks,
Tim Olig
We are working with scatter chart in reporting services.we need to divide the chart into quadrants.We can use VB code in reporting services.Can anyone let me know the VB code to divide that into quadrants and coloring the quadrants
Thanks in advance
Subha
Hi all--I'm looking at SQL Server 2005 Reporting Services as a possible reporting solution for our data warehouse. One of our reporting requirements is the ability to do Gantt charts--has anyone out there had any experiences with creating one with Visual Studio 2005?
Thanks in advance!
Representing an elevation value in a line chart? or (Any chart)
The below are the sample values
GRID_ID StarPoint EndPoint Elevation
3 0 900 1220.1
3 900 1000 1219.5
3 1000 1100 1219.2
3 1100 1300 1220.1
4 0 100 1330.1
4 100 200 1328.1
4 200 300 1329.1
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
We are having trouble finding a lot of documentation around configuring the Funnel chart. Specifcally, we would like to know if there's an option to be able to place the lengend title on the actual Funnel layer. Also, we would like to be able to control the order of the funnel layers to match a business process order from top to bottom. It would appear that the Funnel defaults to aphabetical ordering of the layers. Any good reference for the options available?
View 4 Replies View RelatedI have a Pie Chart report that works well until Users discovered that when values are 0% or less across the chart, the Legend returns NaN. How do I format the Legend to return 0% instead of the NaN that Users do not want to see. Below is my express for the Legend Property="#AXISLABEL" & " - " & "#PERCENT{P0}".
View 5 Replies View RelatedParent Name ID Soft Hard Primary VTM
XYZ 2 50 10 40 100
rtm 3 20 20 60 500
RMM 4 40 20 40 300
I have the above output. When I try to input this as a dataset to a pie chart I don't get the data lables for two slices of the pie chart. Only one slice will show the values when showing data label option is enabled.
For the Pie chart, I have added Soft, Hard and Primary as Values. I haven't added a Category group or a Series group. Why isn't this showing the data labels for the other slices?
Do I need to transform the dataset so that it has a category and the value like below?
XYZ, 2, Soft 50
XYZ , 2, Hard, 10
XYZ, 2, Primary, 40
Will this work since it has a define category that I could insert for the chart.
Is there a possibility in SSRS to have One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
I have a requirement associated with SSRS bar chart.
Data in my DB is like shown below:
A
B
C
Opt1
Data1
10
Data2
20
Opt2
Data1
30
Data2
40
Opt3
Data3
50
Now I would like to build up a bat chart which should have:
Legends: Opt1, Opt2, and Opt3
Categories:
Data1(showing bars with scores as 10 and 30),
Data2 (showing bars with score 20 and 40),
Data3 (showing bar with scores 50 only)
I'm using Reporting Services 2008 R2, version 10.50.2550.0, and Visual Studio 2008, version 9.0.30729.4462 QFE. Not sure if the SQL version matters, since I haven't gotten the report out of the development environment.I've read lots of messages, including URL.... that show you can have multiple data entries per row in a Range Bar Chart, simply by turning DrawSideBySide to False.My data set basically contains four pieces of data, LineNumber, Equipment, StartTime and EndTime. I have data like:
1, 'CLM1', 08:00, 08:30
1, 'CLM1', 09:00, 09:15
2, 'SS1', 08:05, 08:35
2, 'SS1', 09:05, 09:35
(I actually have a date with my datetime entries, but that should give you the idea.) My chart is set up with Values of EndTime and StartTime. If I set my chart up with only Equipment in the Category Groups entry, my chart will show CLM1 from 08:00-08:30, and SS1 from 08:05 to 08:35. No sign of the other entries per equipment, although I added a tablix to retrieve the same data and it all shows up.Changing DrawSideBySide between True, False and Auto has no effect on the data displayed on my chart. If I add StartTime in the Category Groups, I do show all the data, but one row for each piece of data, which isn't what the customer wants.From what I can tell from various sites, I'm set up right, but it just isn't working.