Sql Server 2005 A Fatal Error Occurred In .NET Framework Runtime

Oct 15, 2007

We've deployed an assembly to a new production sql server 2005 instance, and have been having periodic restarts of sql server. The sql server service appears to be stopping and restarting on it's own since the assembly was deployed.

We've narrowed it down to a decryption method. We haven't been able to produce the issue on a consistant basis. Even if we put a ton of load on the stored procedure calls.

The error is below we receive (I cut out some, so it would fit in the thread), we also have mdmp files, that I've attempted to debug with Visual Studio 2005 and Windbg with no success. I have all the symbols (I'm pretty sure), but I don't have much experience with WinDbg, so it's been slow going.

Here's a little about the environment.

Windows Server 2003 Enterprise x64 SP2
Microsoft SQL Server version 9.00.3042.00 SP2
16 MB physical memory
Quad 3.2 GHz Xeon
3 sets of raid drives.
c: OS
e: sql data
e: sql logs
All Sql and windows patches are up to date.

Only thing I can figure is this is something to do with the .NET libraries. When the assembly was compiled it was set to compile for any CPU. We even tried compiling on the 64 bit OS with no luck still.

If anyone has had a similar issue, it would be most helpful, thanks,
Byron


---------------------------------------------------------------
Memory
MemoryLoad = 9%
Total Physical = 16382 MB
Available Physical = 14760 MB
Total Page File = 32159 MB
Available Page File = 30633 MB
Total Virtual = 8388607 MB
Available Virtual = 8365517 MB
**Dump thread - spid = 56, PSS = 0x0000000092BDFE90, EC = 0x0000000092BDFEA0
***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0067.txt
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 10/14/07 15:49:11 spid 56
*
* A fatal error occurred in .NET Framework runtime.
*
* Input Buffer 62 bytes -
* u t i l s . d b 17 00 75 00 74 00 69 00 6c 00 73 00 2e 00 64 00 62 00
* o . d e c r y p t 6f 00 2e 00 64 00 65 00 63 00 72 00 79 00 70 00 74 00
* B a s e 6 4 §@ 42 00 61 00 73 00 65 00 36 00 34 00 00 00 00 01 a7 40
* Ã? 4 1f 09 04 d0 00 34 00 00
*
*
*
* -------------------------------------------------------------------------------
* Short Stack Dump
0000000077D67D8D Module(kernel32+0000000000027D8D)
0000000001D345DE Module(sqlservr+0000000000D345DE)
0000000001D3F3A9 Module(sqlservr+0000000000D3F3A9)
0000000002156D83 Module(sqlservr+0000000001156D83)
00000000021571C2 Module(sqlservr+00000000011571C2)
000006427F8F5FFD Module(mscorwks+00000000005C5FFD)
000006427FA4855B Module(mscorwks+000000000071855B)
000006427F888C4B Module(mscorwks+0000000000558C4B)
000006427F5D51C8 Module(mscorwks+00000000002A51C8)
000006427F5D5113 Module(mscorwks+00000000002A5113)
000006427F453A5A Module(mscorwks+0000000000123A5A)
0000000077F251EC Module(ntdll+00000000000651EC)
0000000077EE5F36 Module(ntdll+0000000000025F36)
0000000077EF31DD Module(ntdll+00000000000331DD)
000006427FA5089B Module(mscorwks+000000000072089B)
000006427806C7F8 Module(mscorlib.ni+000000000006C7F8)
000006427806B564 Module(mscorlib.ni+000000000006B564)
000006428029CBB7 Module(UNKNOWN+0000000000000000)
00000642788A6088 Module(mscorlib.ni+00000000008A6088)
000000000818E8F0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E7D0 Module(UNKNOWN+0000000000000000)
000000000818E090 Module(UNKNOWN+0000000000000000)
00000005010A5F40 Module(UNKNOWN+0000000000000000)
00000005010A5F60 Module(UNKNOWN+0000000000000000)
00000005010A5F90 Module(UNKNOWN+0000000000000000)
00000005010A5FC0 Module(UNKNOWN+0000000000000000)
00000005010A5FD8 Module(UNKNOWN+0000000000000000)
00000005010A6020 Module(UNKNOWN+0000000000000000)
00000005010A63B0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000019 Module(UNKNOWN+0000000000000000)
00000000841EC050 Module(UNKNOWN+0000000000000000)
00000005010A5F40 Module(UNKNOWN+0000000000000000)
00000005010A5F60 Module(UNKNOWN+0000000000000000)
00000005010A5F90 Module(UNKNOWN+0000000000000000)
00000005010A5FC0 Module(UNKNOWN+0000000000000000)
00000005010A5FD8 Module(UNKNOWN+0000000000000000)
00000005010A6020 Module(UNKNOWN+0000000000000000)
00000005010A6020 Module(UNKNOWN+0000000000000000)
00000005010A6180 Module(UNKNOWN+0000000000000000)
00000005010A63B0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000001900000409 Module(UNKNOWN+0000000000000000)
0000000000000001 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E7D0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E200 Module(UNKNOWN+0000000000000000)
000000000818E200 Module(UNKNOWN+0000000000000000)
0000064280400218 Module(UNKNOWN+0000000000000000)
000000000818E250 Module(UNKNOWN+0000000000000000)
000000000818E230 Module(UNKNOWN+0000000000000000)
FFFFFFFFFFFFFFFE Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000001C52423 Module(sqlservr+0000000000C52423)
0000000000000001 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
00000005010A5F40 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000001900000409 Module(UNKNOWN+0000000000000000)
0000000000000001 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E340 Module(UNKNOWN+0000000000000000)
0000000080D262B0 Module(UNKNOWN+0000000000000000)
000006428029C31E Module(UNKNOWN+0000000000000000)
0000000000000004 Module(UNKNOWN+0000000000000000)
000006427F5B3B52 Module(mscorwks+0000000000283B52)
-----------------------

View 1 Replies


ADVERTISEMENT

A .NET Framework Error Occurred During Execution Of User-defined Routine Or Aggregate -While Creating A SQL SERVER 2005 Stored Prodecure In VS.NET 2005

Aug 15, 2007

 Running [dbo].[insertlogin] ( @log = hiten, @pas = hiten ).A .NET Framework error occurred during execution of user-defined routine or aggregate "insertlogin": System.Data.SqlClient.SqlException: Must declare the scalar variable "@Log".System.Data.SqlClient.SqlException:    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages)   at Microsoft.SqlServer.Server.SmiEventSink_Default.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages)   at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe)   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()   at SqlServerProject1.StoredProcedures.insertlogin(SqlString log, SqlString pas).No rows affected.(0 row(s) returned)@RETURN_VALUE = Finished running [dbo].[insertlogin]. ***************************************************************all i am trying to do is :  creating a SP in VS using managed code and then trying to execute it. But every time i get the above error. If you can tell me how to edit connection string in this that would be very helpful. At present i am using :   Using conn As New SqlConnection("context connection=true") I tried to do "" ALTER ASSEMBLY SqlServerProject1 WITH PERMISSION_SET=EXTERNAL_ACCESS""but i get this error  ""  Msg 10327, Level 14, State 1, Line 1ALTER ASSEMBLY for assembly 'SqlServerProject1' failed because assembly 'SqlServerProject1' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.  The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.""" *********************************************************************Plz help 

View 13 Replies View Related

Error Occurred While Executing Batch / Internal Connection Fatal Error

Sep 24, 2015

Got this error running a query with ssms2014
on SqlServer2014
but db has Compatibiliy level 100 (sql2008)

no sql error code in message and no error found in eventviewr (sqlserver log, windows log, application log ecc)when i run that query i got this message in "messages" tab, and in results tab i got a strange result, indeed the value returned doesn't exists in table.

ex table1.field1 possible values= 2,3
it returns 1113344

we got that error thru jdbc too...that query use a lot of joins, unfortunatley i can't post it here. today got this error, so i make a copy of 1 of involved table into another db in the same instance, re run the query on the original db, and it works well.

View 2 Replies View Related

SQL 2012 :: NET Framework Error Occurred During Execution Of User-defined Routine Or Aggregate

Aug 4, 2015

when i try to deploy a packages in integration service catalog i am getting the below error

.NET Framework error occurred during execution of user-defined routine or aggregate

"deploy_project_internal":

System.ComponentModel.Win32Exception: A required privilege is not held by the client

System.ComponentModel.Win32Excepbon:

at Microsoft. SqlServer. IntegrationServices.Server.ISServerProcess.StartProcess(Soolean

bSuspendThread)

at Microsoft.SqlServer.IntegrationServices.Server.ServerApi.DeployProjectlnternal(SqlInt64 deployld,

SqIInt64 versionld, SqlInt64 projectld, SqlString projectName)

. (Microsoft SQL Server, Error: 6522)

View 0 Replies View Related

Import/Export Causes Fatal Error- In Server 2005 Eval. Version

Jan 27, 2006

Have the 2005 Enterprise Evaluation version. Trying to import data from a flat file to DB table. Tried running wizard from designer studio and from creating a data flow in SBIDS

Either way I am able to setup and start excution and then bombs with a fatal error.

"SQL Server Import and Export Wizard has encountered a problem and needs to close. We are sorry for the inconvenience."

Asks to Debug or close.. Tried installing on 2 other machines and having same issue. Tried several different data files and tables same issue.

Does anyone know if this is a bug? Am I missing something with permissions?

Thanks

Bill Bialas

View 1 Replies View Related

.NET Runtime Error On SQL Server 2005 (RTM)

Jan 7, 2006

 

I upgraded my primary production server this morning to SQL 2005.  Everything went fairly smoothly, but a couple of hours after my installation was complete, I found the following error in my event log:
 
Source: .NET Runtime Optimization Service
EventID: 1101
.NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: Microsoft.ReportingServices.QueryDesigners, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 . Error code = 0x80070002
 
I am a little stumped since we did not install Reporting Services.  We only installed Database Services, Integration Services and Workstation Components.  I'm open to any suggestions on this.  This does not seem to be negatively affecting our server, but I do want to resolve it as soon as possible.
 
Thanks,
Kevin
 

View 7 Replies View Related

.NET Runtime Optimization Error On SQL Server 2005

Jan 7, 2006

I posted this on the .NET Framework inside Sql Server forum as well.  Sorry if the cross-post offends anybody.

I upgraded my primary production server this morning to SQL 2005.  Everything went fairly smoothly, but a couple of hours after my installation was complete, I found the following error in my event log:
 
Source: .NET Runtime Optimization Service
EventID: 1101
.NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: Microsoft.ReportingServices.QueryDesigners, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 . Error code = 0x80070002
 
I am a little stumped since we did not install Reporting Services.  We only installed Database Services, Integration Services and Workstation Components.  I'm open to any suggestions on this.  This does not seem to be negatively affecting our server, but I do want to resolve it as soon as possible.
 
Thanks,
Kevin

 

View 47 Replies View Related

Framework 3.0 In OS, Need Framework 2.0 For SQL Server 2005

Sep 22, 2007

Hi,

Can anybody help me with the following problem:

I have Vista Ultimate installed and within Vista .NET Framework 3.0 is installed as a part of the operating system so I can't remove 3.0
Now for MS SQL Server 2005 Express I need .NET Framework 2.0 and the SQL Server 2005 doesn't work with .NET Framework 3.0
Can't install 2.0, get the message that 3.0 is already installed.
Please help me!!

René

View 5 Replies View Related

SQL 2005 Developer Edition Fails With Fatal Error

Aug 22, 2006

Hi,

I created one Installation file with below settings

[Options]
USERNAME=Developer
COMPANYNAME=Worldspan
INSTALLSQLDIR="C:SQL Server"
INSTALLSQLSHAREDDIR="C:SQL Server"
INSTALLSQLDATADIR="C:SQL Server"
INSTALLASDATADIR="C:SQL Server"
ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_FullText,Notification_Services,NS_Engine,NS_Client,SQL_DTS,Client_Components,Connectivity,SQL_Tools90,Tools_Legacy,SQL_Documentation,SQL_BooksOnline,SQL_AdventureWorksSamples,SQL_Samples
SAMPLEDATABASESERVER=".LOCALDEV2005"
INSTANCENAME=LOCALDEV2005
SQLBROWSERACCOUNT="NT AUTHORITYSYSTEM"
SQLACCOUNT="NT AUTHORITYSYSTEM"
AGTACCOUNT="NT AUTHORITYSYSTEM"
SQLBROWSERAUTOSTART=1
SQLAUTOSTART=1
AGTAUTOSTART=1
SECURITYMODE=SQL
SAPWD=L0ca1Dev$a
DISABLENETWORKPROTOCOLS=2

If I do the installation with the default path the installation goes fine or else the Installation fails with a fatal error. I have pasted the error log below :

Microsoft SQL Server 2005 Setup beginning at Mon Aug 21 22:13:33 2006
Process ID : 3060
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2006/7/21 22:13:33
Complete: LoadResourcesAction at: 2006/7/21 22:13:33, returned true
Running: ParseBootstrapOptionsAction at: 2006/7/21 22:13:33
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2006/7/21 22:13:33, returned true
Running: ValidateWinNTAction at: 2006/7/21 22:13:33
Complete: ValidateWinNTAction at: 2006/7/21 22:13:33, returned true
Running: ValidateMinOSAction at: 2006/7/21 22:13:33
Complete: ValidateMinOSAction at: 2006/7/21 22:13:33, returned true
Running: PerformSCCAction at: 2006/7/21 22:13:33
Complete: PerformSCCAction at: 2006/7/21 22:13:33, returned true
Running: ActivateLoggingAction at: 2006/7/21 22:13:33
Complete: ActivateLoggingAction at: 2006/7/21 22:13:33, returned true
Running: DetectPatchedBootstrapAction at: 2006/7/21 22:13:33
Complete: DetectPatchedBootstrapAction at: 2006/7/21 22:13:33, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__3060" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2006/7/21 22:13:33
Complete: PerformDotNetCheck2 at: 2006/7/21 22:13:33, returned true
Running: InvokeSqlSetupDllAction at: 2006/7/21 22:13:33
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [LHDQSKUMARR]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
Instance Name = LOCALDEV2005
Trying to find install through Instance Name
Install Type = 1
If possible, determine action
Machine = LHDQSKUMARR, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = XMLDomDocument, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = Processor, Result = 70010 (0x1117a)
Machine = LHDQSKUMARR, Article = PhysicalMemory, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = OSVersion, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = OSServicePack, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = OSType, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = iisDep, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = AdminShare, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = PendingReboot, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = PerfMon, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = IEVersion, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = COMPlus, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: LHDQSKUMARR
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: Warning
Description: Minimum hardware requirements are not met, therefore, some components may not perform as expected. Action: Make sure minimum hardware requirements are met. Please refer to the readme for minimum requirements.
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2006/7/21 22:13:54, returned true
Running: SetPackageInstallStateAction at: 2006/7/21 22:13:54
Complete: SetPackageInstallStateAction at: 2006/7/21 22:13:54, returned true
Running: DeterminePackageTransformsAction at: 2006/7/21 22:13:55
Complete: DeterminePackageTransformsAction at: 2006/7/21 22:13:55, returned true
Running: ValidateSetupPropertiesAction at: 2006/7/21 22:13:55
Complete: ValidateSetupPropertiesAction at: 2006/7/21 22:13:55, returned true
Running: OpenPipeAction at: 2006/7/21 22:13:55
Complete: OpenPipeAction at: 2006/7/21 22:13:55, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2006/7/21 22:13:55
Complete: CreatePipeAction at: 2006/7/21 22:13:55, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2006/7/21 22:13:56
Complete: PopulateMutatorDbAction at: 2006/7/21 22:13:56, returned true
Running: GenerateRequestsAction at: 2006/7/21 22:13:56
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = -1
SQL_FullText = 3
SQL_SharedTools = 3
SQL_BC_DEP = 3
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = 3
NS_Engine = 3
NS_Client = 3
SQL_DTS = 3
Client_Components = 3
Connectivity = 3
SQL_Tools90 = 3
SQL_WarehouseDevWorkbench = -1
SDK = -1
SQLXML = -1
Tools_Legacy = 3
TOOLS_BC_DEP = 3
SQL_Documentation = 3
SQL_BooksOnline = 3
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = 3
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = 3
Complete: GenerateRequestsAction at: 2006/7/21 22:13:57, returned true
Running: CreateProgressWindowAction at: 2006/7/21 22:13:57
Complete: CreateProgressWindowAction at: 2006/7/21 22:13:57, returned true
Running: ScheduleActionAction at: 2006/7/21 22:13:57
Complete: ScheduleActionAction at: 2006/7/21 22:13:58, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Running: InstallDTSAction.11 at: 2006/7/21 22:13:58
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallDTSAction.11 at: 2006/7/21 22:14:0, returned true
Running: InstallDTSAction.12 at: 2006/7/21 22:14:0
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallDTSAction.12 at: 2006/7/21 22:14:2, returned true
Running: InstallDTSAction.18 at: 2006/7/21 22:14:2
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallDTSAction.18 at: 2006/7/21 22:14:4, returned true
Running: InstallDTSAction.22 at: 2006/7/21 22:14:4
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallDTSAction.22 at: 2006/7/21 22:14:7, returned true
Running: InstallDTSAction.9 at: 2006/7/21 22:14:7
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallDTSAction.9 at: 2006/7/21 22:14:8, returned true
Running: InstallNSAction.11 at: 2006/7/21 22:14:8
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallNSAction.11 at: 2006/7/21 22:14:10, returned true
Running: InstallNSAction.12 at: 2006/7/21 22:14:10
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallNSAction.12 at: 2006/7/21 22:14:12, returned true
Running: InstallNSAction.18 at: 2006/7/21 22:14:12
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallNSAction.18 at: 2006/7/21 22:14:21, returned true
Running: InstallNSAction.22 at: 2006/7/21 22:14:22
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallNSAction.22 at: 2006/7/21 22:14:24, returned true
Running: InstallNSAction.9 at: 2006/7/21 22:14:24
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallNSAction.9 at: 2006/7/21 22:14:25, returned true
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2006/7/21 22:14:26
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallSqlAction.11 at: 2006/7/21 22:14:28, returned true
Running: InstallSqlAction.12 at: 2006/7/21 22:14:28
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallSqlAction.12 at: 2006/7/21 22:14:30, returned true
Running: InstallSqlAction.18 at: 2006/7/21 22:14:30
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallSqlAction.18 at: 2006/7/21 22:14:32, returned true
Running: InstallSqlAction.21 at: 2006/7/21 22:14:32
Installing: sqlwriter on target: LHDQSKUMARR
Complete: InstallSqlAction.21 at: 2006/7/21 22:14:34, returned true
Running: InstallSqlAction.22 at: 2006/7/21 22:14:34
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallSqlAction.22 at: 2006/7/21 22:14:36, returned true
Running: InstallSqlAction.9 at: 2006/7/21 22:14:36
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallSqlAction.9 at: 2006/7/21 22:14:38, returned true
Running: InstallToolsAction.11 at: 2006/7/21 22:14:38
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallToolsAction.11 at: 2006/7/21 22:14:41, returned true
Running: InstallToolsAction.12 at: 2006/7/21 22:14:41
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallToolsAction.12 at: 2006/7/21 22:14:43, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.18 at: 2006/7/21 22:14:43
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallToolsAction.18 at: 2006/7/21 22:14:46, returned true
Running: InstallToolsAction.20 at: 2006/7/21 22:14:46
Installing: BOL on target: LHDQSKUMARR
Complete: InstallToolsAction.20 at: 2006/7/21 22:15:36, returned true
Running: InstallToolsAction.22 at: 2006/7/21 22:15:36
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallToolsAction.22 at: 2006/7/21 22:15:38, returned true
Running: InstallToolsAction.9 at: 2006/7/21 22:15:38
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallToolsAction.9 at: 2006/7/21 22:15:40, returned true
Running: InstallDTSAction at: 2006/7/21 22:15:40
Installing: dts on target: LHDQSKUMARR
Failed to install package
Fatal error during installation.
Setting package return code to: 1603
Complete: InstallDTSAction at: 2006/7/21 22:16:30, returned false
Error: Action "InstallDTSAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Running: InstallNSAction.10 at: 2006/7/21 22:16:30
Installing: sqlxml4 on target: LHDQSKUMARR
Complete: InstallNSAction.10 at: 2006/7/21 22:16:32, returned true
Running: InstallSqlAction at: 2006/7/21 22:16:32
Installing: sql on target: LHDQSKUMARR
******* Got commit request from MSI *******
Complete: InstallSqlAction at: 2006/7/21 22:19:4, returned true
Skipped: InstallToolsAction.10
Skipped: Action "InstallToolsAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "tools", install will be skipped as a result.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Running: InstallNSAction at: 2006/7/21 22:19:4
Installing: ns on target: LHDQSKUMARR
Failed to install package
Fatal error during installation.
Setting package return code to: 1603
Complete: InstallNSAction at: 2006/7/21 22:20:17, returned false
Error: Action "InstallNSAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Running: InstallToolsAction at: 2006/7/21 22:20:17
Installing: tools on target: LHDQSKUMARR
Failed to install package
Fatal error during installation.
Setting package return code to: 1603
Complete: InstallToolsAction at: 2006/7/21 22:22:8, returned false
Error: Action "InstallToolsAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
No install request found for package: "bcRedist", install will be skipped as a result.
Skipped: UninstallForMSDE2000Action
Skipped: Action "UninstallForMSDE2000Action" was not run. Information reported during analysis:
No install request found for package: "patchMSDE2000", install will be skipped as a result.
Skipped: UninstallForSQLAction
Skipped: Action "UninstallForSQLAction" was not run. Information reported during analysis:
No install request found for package: "patchLibertySql", install will be skipped as a result.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2006/7/21 22:22:9
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1603
Error Code: 0x80070643 (1603)
Windows Error Text: Fatal error during installation.

Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097

I have a pentium PC with 599 MHZ speed and 1.5 GB of RAM with Windowsxp SP2. I already have an instance of SQL 2005 running at my box. Let me know if you need any more logs. When I tried to start the sql server it is working fine.



View 1 Replies View Related

Runtime Error When Connecting From The Site To Sql Server 2005

Nov 14, 2007


I moved all my databases to sql server 2005 & when appliction is trying to connect to 2005 databases i get the following error
In the connection string i am using
Password=test;Persist Security Info=True;User ID=test;Initial Catalog=test;Data Source=externalip/instancename

this is the only change on the web server


Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.

Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".





<!-- Web.Config Configuration File -->

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.





<!-- Web.Config Configuration File -->

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>



please let me know the problem

View 7 Replies View Related

Help. When Using Profile GetPropertyValue, I Get The Following Connection Error: An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Sett

May 3, 2008

 Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on  my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100:    public virtual string Address2 {Line 101:        get {Line 102:            return ((string)(this.GetPropertyValue("Address2")));Line 103:        }Line 104:        set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot021d50639a6858cApp_Code.54nvluyo.1.cs    Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]   System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435   System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82   System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105   System.Data.SqlClient.SqlConnection.Open() +111   System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84   System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197   System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782   System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428   System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404   System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117   System.Configuration.SettingsBase.get_Item(String propertyName) +89   System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36   System.Web.Profile.ProfileBase.get_Item(String propertyName) +68   System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4   ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot021d50639a6858cApp_Code.54nvluyo.1.cs:102   ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242   ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.]   System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0   System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72   System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308   System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29   System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480   System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960   System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17   System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149   System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70   System.Web.UI.WebControls.FormView.DataBind() +4   System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82   System.Web.UI.WebControls.FormView.EnsureDataBound() +163   System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69   System.Web.UI.Control.EnsureChildControls() +87   System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21   System.Web.UI.Control.FindControl(String id) +9   CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60   System.Web.UI.Control.PreRenderRecursiveInternal() +86   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041 

View 1 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Cau

Apr 15, 2008

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this
I use Microsoft Windows Vista Home Professional
I have already installed to my computer Microsoft SQL Server 2005 and SQL Serves Express. I used to be successful to connect to the SQL Server but now I CAN NOT.

Not: I try to run SQL Server 2005 but I can not, even I logged on to my computer with an administrator rights. On the other hand I can start and stop the SQL Server Express easily.

As a result, how can I solve this problem.
Thanks in advance.
Bilgin Kılıç
Additional Details


An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

View 5 Replies View Related

A Transport-level Error Has Occurred When Receiving Results From The Server. - After Installing New Instance Of SQL Server 2005 W/NO App Changes

Sep 27, 2006

We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking.  The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end.  This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions.   So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help! 

View 2 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections.

Jan 22, 2008

My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. 
According to this article: http://support.microsoft.com/kb/914277  I am supposed to:




1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder.  The only thing in there is "SQL Server Error and Usage Reporting"...
 The other thing I am greatly concerned with is this:  All is want is for my webpages to be able to access my database for user authentication.  I DO NOT want to grant the internet rights to remote connect to my database.
 
 
 
 

View 4 Replies View Related

Fatal Error Doing Simple Queries From An Sql 2000 To Sql 2005 Exported Database

Jun 8, 2006

I have been trying to export an sql2000 database to sql2005 with no luck. I continuosly get the error

Msg 0, Level 11, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

I have looked upon all support material and have installed the latest sql2005 service pack, but this has not fixed the problem. a simple query as:

select * from [transaction] ta,transactionentry tr

where tr.transactionnumber=ta.transactionnumber and

glacctid=6 and ta.[time]> '3/01/2006'

would produce this fatal error.

the current version I am using is:

Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)

This problem is happening on some of the most important tables in the database.

the error log contains the following:

2006-06-06 11:43:32.59 spid54 ***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0001.txt
2006-06-06 11:43:32.59 spid54 SqlDumpExceptionHandler: Process 54 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2006-06-06 11:43:32.59 spid54 * *******************************************************************************
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * BEGIN STACK DUMP:
2006-06-06 11:43:32.59 spid54 * 06/06/06 11:43:32 spid 54
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * Exception Address = 0136B4F0 Module(sqlservr+0036B4F0)
2006-06-06 11:43:32.59 spid54 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2006-06-06 11:43:32.59 spid54 * Access Violation occurred writing address FFFFFFFC
2006-06-06 11:43:32.59 spid54 * Input Buffer 260 bytes -
2006-06-06 11:43:32.59 spid54 * select * from [transaction] tr,transactionentry te where tr.
2006-06-06 11:43:32.59 spid54 * transactionnumber = te.transactionnumber and glacctid = 6
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * MODULE BASE END SIZE
2006-06-06 11:43:32.59 spid54 * sqlservr 01000000 02BA7FFF 01ba8000
2006-06-06 11:43:32.59 spid54 * ntdll 7C800000 7C8BFFFF 000c0000
2006-06-06 11:43:32.59 spid54 * kernel32 77E40000 77F41FFF 00102000
2006-06-06 11:43:32.59 spid54 * MSVCR80 78130000 781CAFFF 0009b000
2006-06-06 11:43:32.59 spid54 * msvcrt 77BA0000 77BF9FFF 0005a000

I have followed instructions on some support issues posted but none have helped. If anyone has any solution to this problem PLEASE HELP!!!!.

Thanks.

View 7 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: SQL Network Interfa

Dec 10, 2007

I get the following error and have been trying to figure out why I keep getting it.  Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error.  Then I moved it to my local C drive and same thing.  I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do.  I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled.  I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss.  I dont' think using different version of .net framework can create this error.  I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated.  Thanks in advance.
 
Server Error in '/RBOdev' Application.


An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:



An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:



[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692



Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832

View 3 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Jan 24, 2008

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

View 2 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Apr 10, 2008

Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.  

View 1 Replies View Related

.Net Framework Error Message When Starting SQL 2005 Management Studio

Aug 17, 2006

Has anyone ever recieved an error when starting the Management Studio?



"Unhandled excpetion has occurred in a component in your application.

"Input String was not in a correct format"

I click continue and I can still use the manager;however, it gets annoying. The details of the error are very long and too much to add to this thread.

Any ideas?

View 2 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details. RsInternal Error)

May 20, 2008

We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"

Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.

Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.

We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?

Please help.

View 1 Replies View Related

SQL Server 2005 &&amp; .NET Framework 1.1

Nov 21, 2007

I have Visual studio 2003 with .NET Framework 1.1 installed on it. I need to interface it with SQL Server 2005. But SQL server 2005 installs .NET Framework 2.0. And Visual Studio .NET 2003 cannot use the .NET Framework 2.0 assemblies.

So I need help on whether I can interface visual studio 2003 with .NET Framework 1.1 with SQL Server 2005 ?

View 1 Replies View Related

SQL Server 2005 And .net Framework 3.5

Jan 7, 2008

Is it possible to use the visual studio 2008 to create SQL server SP having .net framwork 3.5 to run on SQL Server 2005?

View 21 Replies View Related

.Net Framework 2.0 And Sql Server 2005

Jul 3, 2006

Does anyone know if there are any issues with .Net Framework 2.0 and SQL Server 2005?

Here is my problem .....

I have a web application running on a Windows 2003 Server SE with IIS 6.0. We recently migrated all of our databases to SQL Server 2005 and now we are getting an exception when retrieving data from the DB (Exception Below). We have switched our databases back to Sql Server 2000 and the problem does not occur. Any Help would be much appreciated.

-Ryan

Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Date: 7/3/2006
Time: 10:15:46 AM
User: N/A
Computer: WEBSERVER12
Description:
EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.1830, P3 42435be1, P4 system.data, P5 2.0.0.0, P6 4333aea2, P7 1946, P8 25, P9 system.invalidoperationexception, P10 NIL.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 63 00 6c 00 72 00 32 00 c.l.r.2.
0008: 30 00 72 00 33 00 2c 00 0.r.3.,.
0010: 20 00 77 00 33 00 77 00 .w.3.w.
0018: 70 00 2e 00 65 00 78 00 p...e.x.
0020: 65 00 2c 00 20 00 36 00 e.,. .6.
0028: 2e 00 30 00 2e 00 33 00 ..0...3.
0030: 37 00 39 00 30 00 2e 00 7.9.0...
0038: 31 00 38 00 33 00 30 00 1.8.3.0.
0040: 2c 00 20 00 34 00 32 00 ,. .4.2.
0048: 34 00 33 00 35 00 62 00 4.3.5.b.
0050: 65 00 31 00 2c 00 20 00 e.1.,. .
0058: 73 00 79 00 73 00 74 00 s.y.s.t.
0060: 65 00 6d 00 2e 00 64 00 e.m...d.
0068: 61 00 74 00 61 00 2c 00 a.t.a.,.
0070: 20 00 32 00 2e 00 30 00 .2...0.
0078: 2e 00 30 00 2e 00 30 00 ..0...0.
0080: 2c 00 20 00 34 00 33 00 ,. .4.3.
0088: 33 00 33 00 61 00 65 00 3.3.a.e.
0090: 61 00 32 00 2c 00 20 00 a.2.,. .
0098: 31 00 39 00 34 00 36 00 1.9.4.6.
00a0: 2c 00 20 00 32 00 35 00 ,. .2.5.
00a8: 2c 00 20 00 73 00 79 00 ,. .s.y.
00b0: 73 00 74 00 65 00 6d 00 s.t.e.m.
00b8: 2e 00 69 00 6e 00 76 00 ..i.n.v.
00c0: 61 00 6c 00 69 00 64 00 a.l.i.d.
00c8: 6f 00 70 00 65 00 72 00 o.p.e.r.
00d0: 61 00 74 00 69 00 6f 00 a.t.i.o.
00d8: 6e 00 65 00 78 00 63 00 n.e.x.c.
00e0: 65 00 70 00 74 00 69 00 e.p.t.i.
00e8: 6f 00 6e 00 20 00 4e 00 o.n. .N.
00f0: 49 00 4c 00 0d 00 0a 00 I.L.....

View 3 Replies View Related

.NET Framework 1.1 And SQL Server Express 2005?

Jul 8, 2006

Hi

I am running VS.NET 2003 on my computer and wish to try to install the *free* SQL server express 2005 .

The problem is I can't install SQL express as it asks me to install .NET framework 2.0 first.

I wonder if I do so, will I be able to work with VS.NET 2003?

Thanks,

View 1 Replies View Related

VB.Net 2005 Setup Creation Gets Error Using Microsoft.SqlServer.Dts.Runtime

Feb 3, 2007

I have a very small project written in VB.Net 2005 using the SQL Server 2005 SSiS DTSx package.

I migrated a SLQ 2000 DTS package using the SQL 2005 Legacy tools and saved the package as a local .DTSx package on our file server.

I need to run the package from a clients PC.

I added the reference Microsoft.SqlServer.ManagedDTS so I could then use the Microsoft.SqlServer.Dts.Runtime so I can execute the commands:

Dim oApp As New Application
Dim oPkg As New Package
oPkg = oApp.LoadPackage(g_DTSx_Directory & "AOC copy Generic1 CSV to AOC_verify_file_1.dtsx", Nothing)
Dim oResults As DTSExecResult
oResults = oPkg.Execute

Ok. That works fine and is basically the entire app. It executes without a hitch in debug and as a compiled exe on my PC, but I have all the tools. So now I try and create a setup project for this and I use the setup wizard.

During the creation of the setup project I get a message that states:
The following files may have dependencies that cannot be determined automatically. Please confirm that all dependencies have been added to the project.
C:windowssystem32msxml6.dll

OK. The dll is part of the reference I mentioned above and I have no idea what other dependencies it may have.

How do I find this out?

Has anyone else created a project like this and experenced the same?

I am on a clean build running WinXP Pro with SP2 - VS2005 with SP1 and the SQL Server 2005 tools.

View 4 Replies View Related

SQL Server 2005 Express Edition With .NET Framework 1.0 ?

Sep 17, 2007

Hi all. I am using Microsoft Visual Basic .Net 2002 with .NET Framework 1.0. I want to install free SQL Server database. I want to install SQL Server 2005 Express Edition but it requires .NET Framework 2.0. If I installed MSDE 2000, it doesnt have that Enterprise Manager.So, how is this possible for me to use the free SQL Server with that Enterprise Manager ? Thanks in advance. 

View 4 Replies View Related

Error 87 Installing .NET Framework 2.0 SQL Server Installation

Dec 1, 2007



I confirm, You ca resolve this problem if use a good copy of dotnefx.exe package.
You can find this here:

http://www.microsoft.com/downloads/details.aspx?familyid=0856eacb-4362-4b0d-8edd-aab15c5e04f5

Nino Crudele
blog; http://blogs.ugidotnet.org/Biztalk

View 1 Replies View Related

SQL Reporting - An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)

Feb 6, 2006

I have created an RDL file programatically. When I execute the code I get the error as mentioned below:

Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)

When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.

Any Suggestion/feedback is highly appreciated.
Thank You.


The code of the sample RDL is shown below:

<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer

Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function

</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>

View 8 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)

Nov 10, 2006

Hello everybody,

I am trying to use the reporting services on Windows 2003 with SQLServer 2005. Everything works fine in the report manager and I can access and render the reports without any problem. But when I try to access the reports directly with the URL from the ReportServer, I get the following error :
Reporting Services Error



An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help

The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found



SQL Server Reporting Services

 

So I went to see the error log, and here is what it says :

 

<Header>
  <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
  <Locale>en-US</Locale>
  <TimeZone>GMT Standard Time</TimeZone>
  <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__11_10_2006_13_43_22.log</Path>
  <SystemName>VODAFONE</SystemName>
  <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
  <OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!webserver!5!11/10/2006-13:43:23:: i INFO: Reporting Web Server started
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ConnectionType to '0'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsSchedulingService to 'True'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsNotificationService to 'True'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsEventService to 'True'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsWebServiceEnabled to 'True'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ProcessRecycleOptions to '0'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonFlags to '1064'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing SecureConnectionLevel to '0'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DisplayErrorLink to 'True'  as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WebServiceUseFileShareStorage to 'False'  as specified in Configuration file.
w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Evaluation copy: 0 days left
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds.  Cycle: 600 seconds
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds.  Cycle: 60 seconds
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds.  Cycle: 60 seconds
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds.  Cycle: 60 seconds
w3wp!library!5!10/11/2006-13:43:23:: Unhandled exception was caught: Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found
   at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded()
   at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance()
   at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport()
   at Microsoft.Reporting.WebForms.ReportViewer..ctor()
   at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor()
   at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm()
   at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl)
   at ASP.pages_reportviewer_aspx.FrameworkInitialize()
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
w3wp!library!5!10/11/2006-13:43:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
 Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found
   at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded()
   at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance()
   at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport()
   at Microsoft.Reporting.WebForms.ReportViewer..ctor()
   at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor()
   at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm()
   at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl)
   at ASP.pages_reportviewer_aspx.FrameworkInitialize()
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
   --- End of inner exception stack trace ---
w3wp!library!5!10/11/2006-13:43:25:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
w3wp!library!5!10/11/2006-13:43:26:: i INFO: Catalog SQL Server Edition = Enterprise
w3wp!webserver!5!11/10/2006-13:43:34:: i INFO: Reporting Web Server stopped

 

Does anyone have any idea about what happends ? Any suggestions maybe about anything I should try ?

Thanks very much in advance.

[edit] I just installed a few minutes ago the service pack 1 for SQL Server 2005 and Reporting services, but obviously it doesn't change anything to my problem. [/edit]

View 4 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)

Jun 14, 2007

An internal error occurred on the report server. See the error log for more details. (rsInternalError) - This is the error I get when I try to edit a subcription then click finish.Where do I start in solving this?, heres the log -<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>GMT Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__06_14_2007_12_02_20.log</Path>
<SystemName>MCSCITRIX</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: HTTP status code --> 200
-------Details--------
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)

at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)

at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)

at Microsoft.SqlServer.ReportingServices2005.RSConnection.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)

at Microsoft.ReportingServices.UI.DataDrivenSubscription.Save()

at Microsoft.ReportingServices.UI.DataDrivenPropertiesControl.Buttons_FinishClick(Object sender, EventArgs args)

at Microsoft.ReportingServices.UI.WizardButtons.OnFinishedClicked(EventArgs args)

at Microsoft.ReportingServices.UI.WizardButtons.FinishButton_Click(Object sender, EventArgs args)

at System.Web.UI.WebControls.Button.OnClick(EventArgs e)

at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)

at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)

at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)

at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)

at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: HTTP status code --> 200
-------Details--------

View 3 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)

Nov 21, 2007

Why the error is coming:
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)"

View 2 Replies View Related

SSRS Forms Authentication Error:An Error Occurred While Attempting To Get The ReportServer Url. The RPC Server Is Unavailable. (

Apr 3, 2008

I have managed to get the Forms Authentication sample to work bu there is a hitch. I am running Report Server and Report Manager on the same(test) PC. I can logon to the Report Server without a problem but when I try logon from the UILogon.aspx page for Report Manager I receive the following error:

An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)An error occured while attempting to get the ReportServer Url. The RPC server is unavailable.(Exception from HRESULT: 0x800706BA).

I can register users which suggests that the page can connect to the database.

Any help???

View 3 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details.

Jan 19, 2008

Well, I get the elusive error...


An internal error occurred on the report server. See the error log for more details.

I was trying to preview my report and this keeps coming up. I go to the logfiles to see what may be the issue and there are no errors in the log files(s). Can someone let me know what the usual path or name of the error log this is supposed to write to.


much appreciated,
Clint

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved