Sql Server 2005 - Problem Connecting Remotely
Jun 8, 2007
Hi,
I have 2 machines using SQL Server 2005 developer edition. I am able to connect to each of them locally without any problem. But when I try using one SQL Server as server and another machine's SQL Server as client, I am not able to connect. I get the following error:
TITLE: Connect to Server
------------------------------
Cannot connect to ServerName.
------------------------------
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233).
I have checked for "Allow Remote Connections" property turned on for TCP/IP.
I am using SQL Server Authetication mode.
I have checked for SQL Server Browser service to be running.
Firewall on the server is also allowing the sql server traffic to pass.
But still not able to connect. What could be the problem connecting the 2 machines.
Any help is appreciated.
View 4 Replies
ADVERTISEMENT
Sep 14, 2007
hi. im still a bit new in handling SQL and im having problems connecting to a remote sql server 2005. i have already configured the surface area to accept remote connections and am using the connection string:
SqlConnection lasConnection = new SqlConnection("user id = sa;" +
"password = 12345; server = Naomi;" +
"Trusted_Connection = yes;" +
"database = LAS;" +
"connection timeout=30");
and it returns an error of "System.Data.SqlClient.SqlException: Login failed for user 'NAOMIGuest' "
however, when i use the application on the same computer as the server, it has no problems connecting at all. could please point me to the right direction on how i should face this problem?
thanks in advance
View 5 Replies
View Related
Oct 20, 2006
Hi
I have installed SQL Server 2005 onto a server and then on my client machine I have installed SQL Server 2005 and the Server Management Studio.
When installing it on the server I chose all the defaults so have not setup an sql username or password to connect as I thought I could use Windows.
I go to the Server Management and registered servers, create a new one and enter the ip address of the server and choose Windows Authentication. The following error keeps appearing though and I am not sure what settings/where to check:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)
I have checked and think port 1443 is open on the server, tcpip is enabled but when I choose Windows authentication I cannot enter a username or password as it is greyed out. It has completed the username but no password and these are not the correct ones to connect to the server - I wish to wish the same one I use for RDC.
Or should I try SQL Authentication and if so how would I set this up? Cannot see on the server in SQL Configuration where I could set this?
Hope someone who knows a lot more than me on this can help!
Thanks for your time - this has been driving me mad for days now and everything I print off the internet is not help so any feed back or more useful links to loo up would be great.
View 4 Replies
View Related
Oct 12, 2007
Hi
I hope this is the right place for this question.
I'm using SQL 2005 Express on my local machine, I can connect and do all I need to.
But when I transfered my database to my remote server I cannot connect (I changed the connection string to suit).
<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,1786;Network Library=DBMSSOCN;Initial Catalog=xxx;User ID=xxx;Password=xxx;" providerName="System.Data.SqlClient"/>
I have checked the connection string passsword etc, and all are correct.
I have tried SQL Server Management Studio, aspnet_regsql.exe etc and all give the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No such host is known.)or
System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
I have used the surface config to enable TCP/IP and named pipes.
Any Ideas?
Thanks
View 4 Replies
View Related
Oct 22, 2007
I have a sql server 2005 remotely, need to connect from client using sql management studio. I am unable to connect from one of the client machine and able to connect from different machine.
The tcp/ip, named pipes and sql browser is enabled in server and windows firewall is off in client.
I am getting (provider: sql network interfaces, error 26 - error locating server/instance specified)
Please throw your suggestions.
View 20 Replies
View Related
Oct 5, 2007
i have installed sql server 2005 standard on our server. i need to now connect to the server from a client machine within our network. do i need to install just the client tools? what are the other steps in connecting? im new to sql server, so thanks for the help.
andrew
View 3 Replies
View Related
Dec 9, 2006
I'm new to MSSQL. At my work place, I'm using MSSQL and using SQL Query Analyzer to run queries and view all my database tables and structures.
Now, I can work remotely at home for the time being. So, how do I get SQL Query Analyzer and be able to connect remotely to my database at work?
I've downloaded SQL Server 2005 Express and it comes with SQL Server Management Studio, which looks similar to SQL Query Analyzer. The problem is though, how would I remotely connect to my database server at work? Is it possible to do this using SQL Server 2005 express?
One thing I was advised to do was configure the TCP/IP Port number from 1433 to 1435. However, I do not see an option to configure that nor do not know how to connect remotely (I do have the IP, User, and Pass).
View 1 Replies
View Related
Oct 23, 2007
I have a sql server 2005 remotely, need to connect from client using sql management studio. I am unable to connect from one of the client machine and able to connect from different machine.
The tcp/ip, named pipes and sql browser is enabled in (sscm)server and windows firewall is off in client.
I am getting (provider: sql network interfaces, error 26 - error locating server/instance specified)
Please throw your suggestions.
View 4 Replies
View Related
Sep 8, 2007
I've been trying to configure remote connections to my sql server express to no avail.
First here are some constants to clear some things up:
- OS: Windows XP Pro
- SQL Express version: April CTP release
- Windows Firewall: disabled (to avoid any problems there)
- Network type: two computers connected a router.
- Router firewall: Enabled (I may be wrong but the router firewall only blocks external traffic, so I left it on.)
First, I configured my SQL server to allow remote connections in the SQL Surface Area Configuration. (Set it to both TCP/IP and named pipes)
Second, I enabled and configured sql server browser.
Third, I enabled TCP/IP and named pipes in the 'Protocols for SQL Express' option of the SQL Server Configuration Manager.
According to http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I have done everything I need to (including edit the registry to enable the SQL Server Browser service) and the error I continue to get is:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
So I tinkered and had no success in messing with anything that would fix it. Although, ***when I browsed for network servers on different machine, the server instance DID show up in the list***. So I find it odd that it can find the instance when browsing, but fails to 'find' it when making a connection.
So I didn't stop there, I decided to try the non-sql server browser method of remotely connecting: specifying the IP.
I went back to the blog of instructions referenced above and re-did the steps, this time specifying a TCP Port for the server instance and then after specifying the port on the remote computer connection string, and attempting to connect, I get this error:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)"
I've done all I know how, read all the possible blogs I can, and nothing's come up. If anyone can shed some light on me, I'd pay you 1 billion pretend dollars. Any help would be appreciated. Thank you!
View 2 Replies
View Related
May 26, 2007
hello,
i am trying to connect to Analysis services server through another pc but i am unable to do so.
Using the following commands i manage to connect to analysis services server at my pc
Server.srv=new Server ();
srv.Connect('ip address or name');
but not to another pc. Are there any settings under sql server should i change ?
View 12 Replies
View Related
Jun 18, 2001
I had asked a question last week and I realized that I had phrased it in a misleading way. Within a lab environment at my company, we are experimenting w/ accessing remote SQL data files stored separately on another machine from the SQL server itself (whether it be another client or server).
The experiment is this: You have one client machine accessing a SQL server via Enterprise Manager. The datafiles that you are trying to access are stored on another machine that does not have SQL Server installed. This remote machine only has the datafiles.
Can one map a static path via UNC from the SQL server to the datafiles on the remote machine and then access these datafiles (as long as the user's account has the appropriate permissions to the remote machine)? To my understanding, within SQL server you can only access datafiles that are stored locally on the SQL server itself.
The other thing that I was wondering was if the type of user account had some significance in this situation. More than likely, a local user account would not be able to access the remote machine w/ the datafiles even if the SQL server could map an UNC path and retain it. A domainuser account might be able to do this though.
Any help that you could provide would be appreciated.
View 5 Replies
View Related
Oct 11, 2007
I have SQL 05 and SQL 200o on same server . SQL 05 version is a named inatnce. But when i try to connect it from my computer first it doest show the name instance in the list and when i manulay write its name i got this error.
"A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)"
I went to check that remote connectiona nd SQL browsing is on or not but both were on . any ideas why this is happening and why the name is not coming in list of Server.
Thanks
View 2 Replies
View Related
Jul 24, 2006
Hi,
I am using osql to connect to my remote MSSQL server. I am able to get a prompt for password and telnet to 1433 just fine, so I conclude this is not related to firewall. When I try to connect I get:
C:Program FilesMicrosoft SQL Server80ToolsBinn>osql -S xx.xx.xx.xx -U test
Password:
[DBNETLIB]SQL Server does not exist or access denied.
[DBNETLIB]ConnectionOpen (Connect()).
When I try to connect from 'localhost':
C:Program FilesMicrosoft SQL Server80Toolsinn>osql -U test
Password:
1>
--
This is Microsoft SQL Server 2005 - 9.00.1399.06 and both local and remote connections are allowed. Logs don't show up anything.
Thank you.
View 21 Replies
View Related
Sep 20, 2007
New sql2005 install as a named instance and having trouble connecting from remote machines.
I noticed on our other servers that the "Public" server role is listed in permissions (right-click over the sqlmgr connection for the dialog, then permissions).
When I try to add the role to the new server it doesn't save! This is the only setting that's different, can't connect using sqlmgr from other machines to this server so any ideas on other settings to look at appreciated.
View 6 Replies
View Related
Jan 10, 2006
Hello,
Only the server administrator user can connect to SSIS from remote workstations. All other users encounter "Access denied". What security settings are necessary to permit regular user access to SSIS? Firewalling is not an issue. SSIS is running and works fully for the server administrator user. All users can manage the Database with SSMS just fine; only SSIS cannot be accessed by regular users.
Server Configuration Notes:
Windows Server 2003
SQL Server 2005 Standard
Workstation Configuraiton Notes:
Windows XP Professional
SSMS (installed from the SS2005 media)
Thank you.
View 7 Replies
View Related
Feb 11, 2008
i have a Vb application on an client pc that has to connect with a sql databse file on the server.
the connection string is :
connectionString="Data Source=<servername>SQLEXPRESS,1433;Initial Catalog=TBSD.mdf; User Id=sa;Password=sa;integrated security=false;" />
</connectionStrings>
if i run the application i get the error message : "login failed for user 'sa'.
If i try to connect remotely to sql server express with sql server managment studio express i can connect without any problems.
is this a security problem ?
View 5 Replies
View Related
Oct 5, 2007
im using sql server 2005 express for my vb.net projects but i can't connect to it using SQL Server Management Studio Express or through my vb.net code. I got a error message: An error has occourred while estabishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. I already enabled remote connections as suggested by this site http://www.programmingado.net/a-395/SQL-Server-2005-Express-and-remote-connection.aspx. Made sure that SQL Server and SQL Browser services are running. But I still cant connect.
View 4 Replies
View Related
Sep 11, 2007
Hi guys
I've been dealing with a few problems with SQL Server 2005.
We don't want to give our DBA's local administrator access to the servers so we had a problem with SSIS which I managed to resolve by adding their global group into the local DCOm group and modifying the security properties of MsDtsServer.
Another problem I've come across is when you log into Management Studio as an account that has local administrator access to the server you have the Green symbol next to the registered server, you can then right click and Stop, Restart services etc.
If I log into Management Studio with an account that has full SQL sysadmin rights but not local administrator rights to the server then the Green symbol doesn't appear and the Stop, restart options are all greyed out - all other functionality appears okay, they just seem to lose the ability to remotely stop and start services.
All of the above is with Windows Firewall turned off, if the user has local administrator rights but the SQL Server has the Windows Firewall switched on they are unable to remotely stop and restart services.
Port 1433 is open on the firewall and program execptions are there for sqlbrowse.exe
Anyone come across this particular problem before?
Any help would be appreciated.
Cheers
Hanley
View 2 Replies
View Related
Jul 27, 2006
I have SQL Server 2005 Express installed on a windows server 2003 standard edition. I have configured the windows firewall to allow exceptions for sqlservr.exe and sqlbrowser.exe. I have enabled remote and local connections using tcp/ip & Named Pipes through the Sql Server Surface Area Connection utility. I am able to telnet into the server with: telnet <server ip> <1433>.
Here is the strange part: I am able to connect to the Sql Server remotely from a development machine via Sql Server Management Studio Express, but I am unable to connect to the Sql Server from the same development machine by registering it in Sql Server Enterprise Manager...Is it possible to register SQL Express through Enterprise Manager?
When registering the SQL Express DB in Enterprise Manager I tried both just the (IP Address) of the server and the (IP AddressSQLExpress) as the server/host but I am getting the following errors from enterprise manager:
Just the (IP Address) as the server/host:
Invalid Connection.
ConnectionOpen( Invalid Instance())
(IP AddressSQLEXPRESS) as the server/host:
Sql Server does not exist or access denied. ConnectOpen(Connect()).
Any idea why I can€™t register/mount the instance remotely in Enterprise Manager
but I can in Sql Server Management Studio Express?
Thanks,
Greg
View 1 Replies
View Related
Sep 29, 2006
I had SQL Server Express Edition installed. I then uninstalled both it and Visual C#. I then installed SQL Server 2005 Developer's Edition and reinstalled Visual C# -- both on the same machine. I can connect to SQL Server 2005 using SQL Server Management Studio. However, Visual C# is a different story. When I try to add a new Data Connection, it defaults the data source to .SQLEXPRESS, which is no longer on my machine. I can select .MSSQLSERVER, but when I click on either OK or Test Connection, I time out with an error message -- error 25 - Connection string is not valid. The connection string that is shown at the bottom of the Advanced dialog box is -- Data Source=.MSSQLSERVER;AttachDbFilename=E:InventoryDataInventory_Data.MDF;Integrated Security=True;Connect Timeout=30;User Instance=True
View 12 Replies
View Related
Apr 14, 2008
ok so i have set up SQL server 2005 on a Windows server 2003 machine. I am trying to connect to it via ODBC and/or Visual Studio 2005 on a computer running off the same switch. I have set SQL server to accept remote connections and named pipes as well as had the port unblocked. when i try and connect to it via Vista ODBC wizard or visual studio wizard it says that the server is not there or access is denied.
The server is set up for SQL authentication and i am 100% pos that the username/password i am using is correct. i am at a total loss as to what to do to get my vista machine to talk to that SQL server.
View 1 Replies
View Related
Nov 29, 2006
Dear Sir,
We are using VB.NET 2005 (Winform) and the backend SQL Server Express 2005. We would like to connect the Express (.mdf) database from Remote Machine. What type of connection string we have to use?
We tried the following ConnectionString but we got the error:
Provider=SQLNCLI.1;Server=.SQLEXPRESS;AttachDbFileName=S:MLJData.mdf;Database=MLJData;Trusted_Connection=Yes;
Also suggest what are all the prerequisites to run sql server express 2005 database in client machine.
We did installed the following tools in client machine:
1. .NET framework 2.0
2. sqlncli.msi (SQL Server Native Client Setup)
Please provide us the solution for this.
Thanks
M. Gopalan
Sofist India
okugops@hotmail.com
View 3 Replies
View Related
Apr 15, 2007
TITLE: Connect to Server
------------------------------
Cannot connect to iiiidddbbb.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
------------------------------
What's blocking my remote connection to SQL 2005 on Windows 2003? I am using Vista Ulttima and the above message comes up after I clicked connect. However I have no problem to connect to same database from same location using XP. Can someone help?
View 4 Replies
View Related
Aug 13, 2007
Is there any way to connect to Hosting SQL Server using VS 2005.
I have only VS 2005 on my computer and Dont have SQL Server.
I have a SQL Server credentials on the Hosting server but the problem is the hosting website control panel didnt provide any enterprise manager to work on the database.
Thanks in advance.
View 13 Replies
View Related
Sep 7, 2007
Hoi,
Can someone help me? I have made a website with a database. Local on my pc all work fine. but now i need to set it op on my webhost.
all pages with no database access work but the ones with database controls i get :
Server Error in '/' Application.
Login failed for user 'username'..
I got from my webhost:
db server:
View 1 Replies
View Related
Apr 14, 2006
I installed the SQL Server 2005 Trial and am now having trouble connecting. When I bring up the ASP.NET Configuration tool and Go to "Provider configuration" "Select a single provider for all site management data" AspNetSqlProvider Test I get the following message.
"Could not establish a connection to the database. If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider. "
I have already run the aspnet_regsql command-line utility.
Can anybody give me some information on how to set this up.
I am currently working with the club web site starter kit.
View 1 Replies
View Related
Apr 19, 2008
I have a VB.Net Winform application installed at a client’s site using .net 1.0 and sql server 2000. I am in the process of upgrading to them to sql server 2005. The installation of sql server 2005 is on a different machine then the 2000 version. I have installed SQL Server 2005, SP2 and converted the database from SQL Sever 2000. Everything is good at this point. I can even establish a connection through a user’s login.
The Problem is when I try to connect from a client machine using my .net 1.0 application. The client test machine that I am using is a Windows NT Server which may have something to do with the problem. Any way I am getting the following error message.
SSL Security error
From other topics I have read I believe this is something to do with a certificate. The application only needs to connect from within the local network. I have tried connecting using the ODBC Data Sources tool from the client machine I get the following error.
Microsoft SQL Server ODBC Driver Version 03.81.9001
Running connectivity tests...
Attempting connection
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SSL Security error
TESTS FAILED!
Should I be using the TCP/IP?
Do I need to install anything on the client machines?
Do I need to open ports on the firewall?
Is there anything else that I am overlooking?
Thanks,
David
View 3 Replies
View Related
Aug 29, 2007
Hi guys,
I am new to sql server 2005 and I am having some problems connecting to it. Hope you guys can help!
I have install the sql server management studio express. At the login page, there is one field which is Server name. However, in my studio express that field is empty. I believe that field should have my server name on it but it is empty. Due to the empty field in the server name, I am not able to connect to the server. Did I set up my server wrongly that explains why the server name field is empty???
Thanks
Regards
View 1 Replies
View Related
Jun 16, 2006
HiWe are planning to move over to SQL Server 2005 in near future.At the moment Website is on a seperate server then the Database.OS for both the server is Window 2003 and currently our data is on SQLServer 2000(on which everything works fine).Part of the testing process we tried to connect our website on SQL 2005and it does not work at all.I get this----------------------------------------------------------------ADODB.Connection error '800a0e7a'Provider cannot be found. It may not be properly installed.When i use following connection string"Provider=SQLNCLI;Server=127.0.0.1;Database=dbName; UID=UserName;PWD=UserPassword;"(Above string has fixed problem for few people- googled it, but not forme.)--------------------------------------------------------------------------------------------------------------------------------This is the message i get for all the following connectiong stringMicrosoft OLE DB Provider for SQL Server error '80004005'[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist oraccess denied.1) - "Provider=SQLOLEDB.1;Password=UserPassword;Persist SecurityInfo=True;User ID=UserName;Initial Catalog=ABC;DataSource=XXX.XX.X.XX,1433"2) - "Provider=sqloledb;Data Source=XXX.XX.X.XX,1433;NetworkLibrary=DBMSSOCN;Initial Catalog=ABC;UserID=UserName;Password=UserPassword"3) - "Provider=SQLOLEDB.1;Persist Security Info=True;UserID=UserName;Initial Catalog=ABC;Data Source = ServerNameSQLInstance"----------------------------------------------------------------I tried connecting to SQL Server 2005 through our system developed inVB.Net 2003 and it works fine and here is the Connection String :"Data Source=ServerNameSQLInstance;Initial Catalog=ABC;PersistSecurity Info=False;user id=UserName;password=UserPassword"I would really appreciate any help.Mits
View 10 Replies
View Related
Aug 12, 2007
I want to connect to database using sql server 2005 through Visual web developer 2005 express edition . what will be the connection string for this....
View 3 Replies
View Related
Jan 4, 2008
hi all,
i'm trying to JSP and SQL server working. i'm close to getting there but there is this error i cant seem to get rid of.
here are my test code:
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%
String testd = "";
try
{
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver").newInstance();
}
catch (Exception E)
{
out.println("Unable to load Driver");
E.printStackTrace();
}
try{
//String Surl = "jdbcqlserver://localhost:1433;databasename=test";
//String Sid = "calo";
//String Spass = "";
Connection C = DriverManager.getConnection("jdbcqlserver://localhost:1433;databaseName=test;user=calo;password=a");
Statement stmt = C.createStatement();
ResultSet rs = stmt.executeQuery("select * from testTable");
if (rs.next()){
testd = rs.getString("testData");
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<%=testd%>
<body>
</body>
</html>
<%}
rs.close();
stmt.close();
C.close();
}catch (SQLException E){
out.println("SQLException: " + E.getMessage());
out.println("SQLState: " + E.getSQLState());
out.println("VendorError: " + E.getErrorCode());
}
%>
the error message i get was:
SQLException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect SQLState: 08S01 VendorError: 0
any help would be greatly appreciated.
yapsing
View 3 Replies
View Related
Jun 17, 2006
Hi
We are planning to move over to SQL Server 2005 in near future.
At the moment Website is on a seperate server then the Database.
OS for both the server is Window 2003 and currently our data is on SQL
Server 2000(on which everything works fine).
Part of the testing process we tried to connect our website on SQL 2005
and it does not work at all.
I get this
----------------------------------------------------------------
ADODB.Connection error '800a0e7a'
Provider cannot be found. It may not be properly installed.
When i use following connection string
"Provider=SQLNCLI;Server=127.0.0.1;Database=dbName;UID=UserName;PWD=UserPassword;"
(Above string has fixed problem for few people- googled it, but not for
me.)
----------------------------------------------------------------
----------------------------------------------------------------
This is the message i get for all the following connectiong string
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or
access denied.
1) - "Provider=SQLOLEDB.1;Password=UserPassword;Persist Security
Info=True;User ID=UserName;Initial Catalog=ABC;Data
Source=XXX.XX.X.XX,1433"
2) - "Provider=sqloledb;Data Source=XXX.XX.X.XX,1433;Network
Library=DBMSSOCN;Initial Catalog=ABC;User
ID=UserName;Password=UserPassword"
3) - "Provider=SQLOLEDB.1;Persist Security Info=True;User
ID=UserName;Initial Catalog=ABC;Data Source = ServerNameSQLInstance"
----------------------------------------------------------------
I tried connecting to SQL Server 2005 through our system developed in
VB.Net 2003 and it works fine and here is the Connection String :
"Data Source=ServerNameSQLInstance;Initial Catalog=ABC;Persist
Security Info=False;user id=UserName;password=UserPassword"
Then i downloaded SQL Native Client and installed on the web server.
I looked in SAC Tool and "Local and Remote Connection" and "Using Both
TCP/IP and Named Pipes" options are selected. I have checked SQL
Browser service is running.
Now when i use this string
"Provider=SQLNCLI;Server=127.0.0.1;Database=DBName;UID=UserName;PWD=UserPassword;"
i get
Microsoft SQL Native Client error '80040e4d'
Login failed for user 'UserName'.
I have created this user and this user has proper permission to access
the database i need.
I would really appreciate any help as this is driving me crazy.
Mits
View 11 Replies
View Related
Nov 17, 2007
Hello Everyone,
I have searched the web and this forum relentlessly for past 2 days but I haven't been able to solve the problem.
Here is the description
I work for company X and log on to my computer with my credentials Xme. Now I have the ability to log in into my customers environment using VPN. I can do this by logging in into the customer network by another set of credentials Yme2. (where Y is customers domain and me2 is the id given to me by the customer)
Post this, I am able to ping the customers server.
Now when I use SSMS to connect to sql server, I get the error message"Login failed for user Xme"
Why doesn't SSMS ask me whether I want to use Xme or Yme2 credentials? why doesn't SSMS try with Yme2 credentials? Why does SSMS only use Xme credentials?
I also tried to run SSMS as Yme2 but that also didn't work.
It will be kind if you could let me know how can I specify what credentials should SSMS use.
regards,
Abhishek.
View 10 Replies
View Related
