If you are doing an insert into a table with 10 columns, but you only have values for 2, is it better to insert 2 and let the table default the others or is it better to insert all 10 using default values for the 8 you don't know? Do you know of any benefits one way or the other? Thanks in advance.
View 1 RepliesI am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedI had a function like below :Public Sub Getdata2(ByVal query, ByVal db, ByVal name)
Dim selectSQL As StringDim con As SqlConnection
Dim cmd As SqlCommand
Dim reader As SqlDataReader
Trycon = New SqlConnection("User ID=xxx;password=xxx;persist security info=True;Initial Catalog=database1;Data Source=xxx.xxx.xxx.xxx.xxx,xxxxx;")
Dim username As String
username = Request.QueryString("username")
selectSQL = "SET DATEFORMAT DMY;Insert into table1(hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, username, DGP, Remarks, Sub_Code, caveat, consider, age) select hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, '" & username & "', DGP, Remarks, Sub_Code, caveat, consider, age from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 where " & querycmd = New SqlCommand(selectSQL, con)
con.Open()
reader = cmd.ExecuteReader()
lbl.Text = selectSQLCatch ex As Exception
lbl.Text = ex.Message
Finally
If (Not con Is Nothing) Then
con.Close()
con.Dispose()
End If
End Try
End Sub
'-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
May i know that how do i retrieve data from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 due to diffrent server, diffrent UID and Password
I need to load the following data into a SQL table. This is how the vendor is able to provide it to us.
CRCorp Daily Report,,,,,,
,,,,,,
Facility,Location,Purchase Order #,Vendor,Inventory #,Date Ordered,Extended Cost
09-Mowtown 495 CRST,09-402A Women's Imaging,327937,"BARD PERIPHERAL VASCULAR, INC.",113989,7/25/2014,650
09-Mowtown 495 CRST,09-402A Women's Imaging,327936,"WB MASON CO., INC.",112664,7/25/2014,8.64
01-Mowtown 499 CRST,01-302B Oncology,327947,McKesson General Medical,n/a,7/25/2014,129.02
[Code] ....
I have attempted to bulk insert it into this table with no luck.
CREATE TABLE POMaster
(Facility VARCHAR(75),
Location VARCHAR(75),
PONum INT,
VendorNm INT,
INVENTORYNUM VARCHAR(25),
orderDte DATE,
ExtendedPrice NUMERIC(10,2)
)
GO
It does not like the double quotes. How to make this format work? Do I need a format file?
I want to bulk insert data into a table named scd_event_tab inside a database named rdb.
When I do select * from rdb.dbo.scd_event_tab, i get :
JOB_ID RUN_ONPRIORITYPAYLOADTIMEOUT_INTERVALSTATUSPICKUP_TIMESCD_TYPESCHEDULE_IDDB_ADMIN_LOGIN_REQUIRED_YN
I saved the result into a csv file and then truncated the table. Now, I am trying to bulk insert the data into the table. So I used:
bulk insert
rdb.dbo.scd_event_tab from 'C:userssluintel.ctrdesktopeventtab.csv'
with
(
codepage = 'RAW',
datafiletype = 'native',
fieldterminator = ' ',
keepidentity,
keepnulls
);
go
However, I get this error:
Msg 4867, Level 16, State 1, Line 1
Bulk load data conversion error (overflow) for row 1, column 1 (JOB_ID).
Msg 4866, Level 16, State 5, Line 1
The bulk load failed. The column is too long in the data file for row 1, column 3. Verify that the field terminator and row terminator are specified correctly.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
I wonder if it possible to move data from tables on a linked server to a "normal database"?
Name linked server: Covas
Name table on linked server: tblCountries
Name field: cntCountryName
Name "normal" database: CovasCopy
Name "normal" table: Countries (or dbo.Countries)
Name "normal" field: Country
This is just a test setup. I figure that if I get this working the rest will be easier.
My current query:
select * from openquery(COVAS,'
INSERT INTO CovasCopy.dbo.Countries(Country)
SELECT cntCountryName FROM db_covas.tblCountries;')
Hai Everbody,
for me in my project i want to read data from a csv file and insert it in a sql server databse table.The csv file may contain n number of columns,but i want only certain columns from that, and insert it in the database table.How to achieve this. Plz help me it is urgent. Thanks in advance.
Thanks and regards
Biju.S.G
I have three tables:
"PaymentsLog"
"DatePeriod"
"PaidOrders"
As per below
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[PaymentsLog](
[Code] ....
Is there a way to look at the DatePeriod table and use the StartDtae and EndDate as the periods to be used in the select statement and then cursor through each date between these two dates and then insert the data in to the PaymentsLog table?
When assigning permission to an authentication user to connect to a server database, if I want the user to be able to insert / update / delete data on db objects specifically tables, what permission should be assigned to that user?
My thoughts were Insert / Update / Delete; however, someone suggested that the Execute permission would do this ...
On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer form that logged in users have access to.
it has 2 questions including a text box for Q1 and dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
Be very helpful if somebody could check the code and advise where the problem is??
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
</table>
Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</asp:WizardStep>
Event Handler
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
}
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
Hi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1
(THING,PERSONORGROUP,ACCESSRIGHTS)
VALUES
((select SYSTEM_ID from TABLE2 where
AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID
=('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID
=('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
Do I need to use a cursor?
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedIs it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789
Hi,
I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table.
Overall it is like storing the history of the table updation.
How do i write a stored procedure for this?
Anybody has done this before?
Pls help me.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
[Code] ....
Hello,
I have a table called #table1 which is populated as in the example below.
I would like to write a selectinsert statement based on #table1 that populates #table2 like in the #table2 example.
Note #table2 is a fixed table that follows the structure below.
Can any of you T-SQL gurus help me with my problem?
Any help will be most appreciated.
Thanks
---------------------------------------------
/*
Please paste T-SQL into query window
*/
---------------------------------------------
CREATE TABLE #table1
--max of 5 orders
(
custID nvarchar(6),
dateorder [datetime] NULL,
order1 nvarchar(2),
order2 nvarchar(2),
order3 nvarchar(2),
order4 nvarchar(2),
order5 nvarchar(2)
)
GO
SET ANSI_PADDING OFF
Insert into #table1
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null UNION all
select '012345','2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03' UNION all
select '012345','2008-04-21 00:00:00.000' , '01', '06', null, null, null UNION all
select '012345','2008-04-22 00:00:00.000' , '01', '02', '05', '07', null UNION all
select '012345','2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null UNION all
select '987654','2008-04-22 00:00:00.000' , '01', '02', '05', '16', null UNION all
select '987654','2008-04-23 00:00:00.000' , '03', '06', null, null, null
select * from #table1
--This is the table i would like to insert my data into
CREATE TABLE #table2
--max of 5 orders in 1 day
--it does not matter what date the date order was made the 1st date would appear in dateorder1 and so on...
(
custID nvarchar(6),
dateorder1 [datetime] NULL,
order1_1 nvarchar(2),
order1_2 nvarchar(2),
order1_3 nvarchar(2),
order1_4 nvarchar(2),
order1_5 nvarchar(2),
dateorder2 [datetime] NULL,
order2_1 nvarchar(2),
order2_2 nvarchar(2),
order2_3 nvarchar(2),
order2_4 nvarchar(2),
order2_5 nvarchar(2),
dateorder3 [datetime] NULL,
order3_1 nvarchar(2),
order3_2 nvarchar(2),
order3_3 nvarchar(2),
order3_4 nvarchar(2),
order3_5 nvarchar(2),
dateorder4 [datetime] NULL,
order4_1 nvarchar(2),
order4_2 nvarchar(2),
order4_3 nvarchar(2),
order4_4 nvarchar(2),
order4_5 nvarchar(2),
dateorder5 [datetime] NULL,
order5_1 nvarchar(2),
order5_2 nvarchar(2),
order5_3 nvarchar(2),
order5_4 nvarchar(2),
order5_5 nvarchar(2)
)
Insert into #table2
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null, '2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03','2008-04-21 00:00:00.000' , '01', '06', null, null, null,'2008-04-22 00:00:00.000' , '01', '02', '05', '07', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null ,'2008-04-22 00:00:00.000' , '01', '02', '05', '16', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null , null, null, null, null, null, null, null, null, null, null, null, null
select * from #table2
drop table #table1
drop table #table2
----------------------------------------
we have a table below
TABLE1
ID Roll Name Amount . . . . . . so on
---------------------------------------
1 2 Alex 500
2 5 Jones 600
3 2 Ales 400
and we have TABLE 2
ID Roll Name Amount . . . . . . . so on
In both the Tables ID Field is Identity Field and rest all the columns are identical in both the tables.I want to perform a query in such a way that SQL Should,
1) Remove all data from TABLE2 First
2) Select those records from TABLE1 where Roll = 2
3) Then, Insert the results to TABLE 2
So we should get the result similar to below:
ID Roll Name Amount . . . . . . . so on
---------------------------------------
1 2 Alex 500
3 2 Ales 400
how can I do this in a same sql statement.
I have two databases in SQL Server and they both have almost the same tables. I want to insert the data of a table from the first database into a table with the same name, but from the second database. How can i do this?
I have to tables like given below Landing table "A" (Data load will happen over here, No primary keys mentioned over here) table "B" .Now I want to move the data from A to B.I have made use of below query insert into B select * from A...Landing table "A" has huge no of records, MS SQL server is taking huge amount of time.any alternative way to make this insertion process faster?
View 6 Replies View RelatedHi,
If I have 2 tables (Source and Destination) which have the same fields except the fields are not in same order, what is a practical way to insert all data from Source into Destination? I know that I can do insert with select but then I need to specify every single fields since the fields positions are different between Source and Destination.
Thank you for any help.
SALAM SIR,
CREATE TABLE Airlines_Master
( Aircode CHAR(2),
Airlines_name VARCHAR(15))
THIS IS MADE A TABLE IN SQLSERVER 2000.BUT HOW CAN INSERT DATA INTO THIS TABLE?
I'm passing data into sql proc. then insert into two diffrent tables. The two table dont have 1:1 relations. I'm trying to come up with the best way to insert the values into these two table. Here is what I have-- any suggestion?
fyi. I will love the proc to check errors during the process
CRETAE PROCEDURE dbo.two_tableProc
@File1 varchar(5),
@File2 varchar(5),
@SystemDate datetime,
@RecordCt1 varchar(100)
@RecordCt2 varchar(100)
@RecordID INT
as
INSERT INTO tbl1
(
File1,
RecordCt1,
SystemDate
)
VALUES (@File1,@RecordCt1,@SystemDate)
INSERT INTO tbl2
(
File2,
RecordCt2,
RecordID
)
VALUES (@File2,@RecordCt2,@RecordID)
GO
Josephine
I tired to insert data from xml to a table .but only null value is getting inserted into the table.The query is attached below.
create table Detail_test1
(
DetailIdInt,
LaIdInt,
OcCodeVarchar,
BIdINT,
RateINT)
Declare @xml XML
set @xml='<ArrayOfBDetailLine>
[code]....
can some one help me, how can i insert data, using some commands,
scenario,
two server, srv01 and srv02, both have database sales and both a table saleshistory
pseudocode:
insert into srv02.sales.dbo.saleshistory select * from srv01.sales.dbo.saleshistory where id > srv02.sales.dbo.saleshistory.max(id)
Hello,
I wan t to insert into a tabla data from other tabla using a parameter, my question is. What is the better tool to make this? "Execute SQL Task" or extrat te data using "OLE DB Source" and then use "OLE DB Destination" to insert the data into the new table?
Thanks !!
Carmine
Hi, I'm not user to inserting data into databases, usually I just read the data. So I think my problem might be pretty common.I have a table of longitudes, latitudes, city names, and country names. I set the primary key to be the columns longitude and latitude. I have a method that generates the user's location and the mentioned data. So I want to only insert the new data into the database if it is new and unique. currently if the same user goes to my site, it inserts the data fine the first time and then throws and error the second time because it is inserting duplicate primary key information. Do I need to query the database to see if the data record already exists? or is there a way to insert the record only if it is "new"?? Thanks for the help!!
View 2 Replies View RelatedHi
I have a table called Version and its attributes are Version_ID, Project_ID , Hospital_ ID , Date_Created and comments. I want to select the data by Version_ID,Project_ID and Hospital_ID and the selected data is inserted in the same table(Version) as new row .
Table: Version (Version_ID(Primary_key), Project_ID(Foreign_Key),Hospital_ID(Foreign_Key),Date_Created,Comments).
Iam using Visual Web Developer Express and SQL Server 2005. Iam doing on asp.net 2.0.
Could anyone please send me the code asp.net 2.0 for the above problem.
Begin
INSERT Into aspnet_Membership (ApplicationId,UserId,Password,PasswordFormat,PasswordSalt,Email,LoweredEmail,IsApproved,IsLockedOut,CreateDate,LastLoginDate,LastPasswordChangedDate,LastLockoutDate,FailedPasswordAttemptCount,FailedPasswordAttemptWindowStart,FailedPasswordAnswerAttemptCount,FailedPasswordAnswerAttemptWindowStart)
Select '{FB1DA11C-F1AB-4E42-AAFE-E9EC8D6C607F}',UserId, cast(Rand() as nvarchar),0,'0',UserEmail,UserEmail,1,0,getdate() ,getdate() ,getdate() ,getdate() ,0,'01/01/1754',0,'01/01/1754'
From aspnet_Users
End
the problem is the Password field i try to insert to every record other password, but it give me at first a random numbers but it appear at all of the records...
what can i do that each record will get a random password?
Thanks