Sql Server Client Network Utility
Nov 27, 2007
Hi,
Iam installing the SQL Express Edition with Advance Services. Using Command prompt.
start /wait setup.exe /qb SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SAPWD=mypassword ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_Replication,SQL_FullText,Client_Components,Connectivity,SDK,SQL_SSMSEE
after installing the SQL Express. The Named Pipes and tcp/ip is in disable protocols only.
How do i enble the named pipes and tcp/ip through the command line installtion.
Thanks
Kiran
View 1 Replies
ADVERTISEMENT
Nov 9, 2000
I'm getting errors in EM when trying to connect to one of my registered servers. When the Client Network utility is using TCP/IP as the default protocol I get:
A connection could not be established to xxxxx - General network error. Check your network
documentation. ConnectionOpen (connect())...
But if I switch to use Named Pipes I connect just fine.
This worked just fine up until last week.. We're going through Tokenring to Ethernet conversions.. Is this a bigger network issue?
Thanks..
View 1 Replies
View Related
Dec 5, 2001
(SQL Server7, NT4)
Were upgrading our server with SP3. Do the end users using the SQL server client network utility need SP3?
View 2 Replies
View Related
Aug 25, 2006
Is there an INF file or a registry entry for the client network utility that I can move from machine to machine? I hate having to re-enter all of my SQL servers and alias' every time I install Tools on a new machine...Any help is greatly appreciated!!
View 1 Replies
View Related
May 6, 2004
Hi Folks,
I'm having to move workstations and was wondering if anybody knew a quick way to move all the alias's from your client network utility from one workstation to another.
Cheers
View 1 Replies
View Related
Jan 13, 2004
2 Questions:
1) I am getting back into SQL more than before, in my new job. I need to find the service pack installed on the clients who have the Client Network Utility installed. I do not remember how to do this.
2) Running 'Select @@VERSION' on the server returns 7.00.1063 but does not indicate the service pack. Does this still mean sp4 has been installed?
I'm trying to ensure we'll all up to date since our dual 700 procs are acting eratic...jumps between 10 - 95% or so.
Server info:
NT Server SP6
SQL 7.0
2GB Ram
2 procs @ 700Mhz
Roughly 80 network connections.
No other programs running on server except Antivirus.
Thank you!
View 3 Replies
View Related
Jul 23, 2005
Hello,I have SQL Server 2000 Developer Edition. Where is SQL Server NetworkUtility?In Start menu SQL server group I have only Client Network Utility :|Is it a command line tool or sth? How to install it?tnx--STEFAN
View 2 Replies
View Related
Apr 24, 2006
When i open the server network utility window, it doesn't show any protocols in Enabled protocols and Disabled protocols.:shocked:
I have sql server 200 with sp4. pls can anyone solve my issue.
thanx and regards
kiran
View 3 Replies
View Related
Jul 28, 2007
Hi all,
What is client network and server network alias in SQL server.
when and why we should use that mean what is the requirement of ALIAS in SQL Server.
Thanks
View 5 Replies
View Related
Jul 20, 1998
Could someone please explain to me the client configuration utility in plain English please.
I have VB applications installed on the sales force`s laptops that log onto SQL Server through RAS and an ODBC connection. The client configuration utility is not installed on their machines, but everything works fine.
The BOL say that when installing utilities, the user is given the option of selecting the net-library to use. I am not, when installing it on my NT Workstation, or W95 Operating system.
The BOL also state that the control panel has an entry to allow selecting which protocol to use. I cannot see it
Who needs the client configuration utility installed, obviously not the clients, is it just the people who want enterprise manager on their desktops ?
I am completely confused by this application
This is the one area of SQL Server where I am lost, help !
View 2 Replies
View Related
Feb 28, 2000
Anyone know of any kind of little script or utility that can be placed on an end users PC to backup a specific database whenever they want? All I want it to do is to name it according to the date, place it in a predefined directory, and tell the user that it worked or failed. I am not very good at programing. Also, this is MS SQL 7. This tool needs to be fairly idiot proof. Any ideas?
Thanks,
Tim
View 2 Replies
View Related
May 5, 2006
Hi All,
I've developed an application that connects to a SQL Server 2005 Express database. I created a DSN to connect to the database through ODBC. Currently, I am testing locally and everything works fine.
I would now like to install my application on another workstation and connect remotely to the database located on my development machine.
The client workstation does not have SQL Server 2005 Express installed on it because I would just like my application to connect remotely by creating the DSN and using ODBC. What I'm missing here are the database drivers. The "SQL Natice Client" is not available on this client workstation. How can I deploy the necessary drivers with my installation file so that I may create the required DSN name using the SQL Native Client driver?
Thanks!
View 6 Replies
View Related
Feb 5, 2015
I'm trying to call the SQL 2012 SSIS packages deployed in SSISDB from batch files from another client system. But I couldn't find the DTExec.exe file in the 110Binn folder. How can I install this utility? Can I get this utility with client installation or do I need to install Server components which need license. I donot have license to install server component. how to install the DTExec utility without any licensing and provide me the Setup link where I can download and install.
View 0 Replies
View Related
Oct 5, 2006
I'm sure this is rediculously simple, but I am totally new to sql. We are upgrading our practice management software to an edition which requires sql to be installed on our Win2003 file DC server and 18 client computers, all running xp-sp2. New software comes with an option to automatically install MSDE but I would like to try sql05 express instead, which they support if it is pre-installed on the server and all workstations. We meet all necessary sql05-exp requirements. After spending several hours online and downloading 05 books online, etc I beleive I understand how to set up the file server where the data resides, but I am now confused about what exactly I am to install on the client computers. Clients have .net 2.0 installed. I see no option to download specific "Client" software, just sql05 server express edition sp1, management studio express, and express edition toolkit sp1. Are you supposed to just run the server ed sp1 on each workstation, enable tcp/ip, and tell it to connect to the server's sql database, and if so, doesn't that leave a sql 'server' running on each workstation? Other documentation mentions installing the toolkit and connecting to the server, but I've found nothing which explains this simple procedure everyone must do, so I know I'm missing the obvious. Please help and Thanks.
View 1 Replies
View Related
Apr 10, 2006
PLATFORM VERSION INFO
Windows : 5.1.2600.131072 (Win32NT)
Common Language Runtime : 2.0.50727.42
System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200)
mscorwks.dll : 2.0.50727.42 (RTM.050727-4200)
dfdll.dll : 2.0.50727.42 (RTM.050727-4200)
dfshim.dll : 2.0.50727.42 (RTM.050727-4200)
SOURCES
Deployment url : http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected:
+ Downloading http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application did not succeed.
+ The remote server returned an error: (401) Unauthorized.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [4/10/2006 11:34:29 AM] : Activation of http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [4/10/2006 11:34:29 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
- Downloading http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application did not succeed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Net.WebException
- The remote server returned an error: (401) Unauthorized.
- Source: System
- Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
Does anyone know how that I can get the reportbuilder.application to run on a client on the network. It seems that if I have to remote into the actual server to get the report builder to work would be pointless for users on the network. I get the 401 Unauthorized all the time. Any comments would help.
Jordanb412
View 3 Replies
View Related
Oct 31, 2006
I have a question regarding the nature of virtual sql servers, specificially what protocol is used to communicate to the server when a request is made by a client.
For example, if a scheduled job is run on the virtual sql server, what determines the protocol used (e.g. TCP/IP, named pipes etc.) by SQL Server agent? Is it the client network alias set up on the virtual server?
I am asking because currently the client aliases on some of our virtual sql servers are using named pipes and I think this is causing a problem with our backups.
Thanks,
Adrian.
View 8 Replies
View Related
Aug 24, 2005
I can't map other sql servers without creating alias with proper port number on client network utility. Other users using same version of the client tools, MMC, SQL DMF etc. I need to map 70 sql servers on using my client tools.
Any help is appreciated.
thanks,
View 3 Replies
View Related
May 2, 2006
On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS
Client unable to establish connection
Encryption not supported on SQL Server. (Microsoft SQL Native Client)
I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?
View 2 Replies
View Related
Jan 28, 2001
I am trying to do BCP from a comma separator .txt file to upload it into two tables. That is I want the first row (4 columns of header details ) into one table and from the second row (21 columns each of detail rows) to be uploaded into another table. I have written a batch file to upload the header details by giving the first and last column as 1.It is working fine. But when I try to upload the detail rows into another table by giving the first row as 2, the bcp is not able to read from the second row. It skips the second row and reads from the third row. This happens for all separators like pipeline separators also.So to avoid this I have to give blank 21 separators(i.e. , or |) in the second row to avoid the loss of data. Please provide a solution for this, as I cannot insist my customer to provide me a text file with blank comma in the second row.
Thanks and Regards,
S.Raghuraman
View 1 Replies
View Related
Feb 1, 2008
Hi,
I want to know is it possible to export column data to a http folder ? When I executed the following bcp command
exec master.dbo.xp_cmdshell 'bcp "SELECT code from Table" queryout http://[server]:[portno]/Sample1.aspx -T -c'
the system throws an error.
SQLState = HY000, NativeError = 0
Error = [Microsoft][SQL Native Client]Unable to open BCP host data-file
Is it possible such a bcp command ?
Thanks
Maju
View 2 Replies
View Related
Aug 27, 2007
I have just installed sql 2005 with sp2 and now I am trying to connect with other databases but when I try to register, it gives me an error stating something about not enabling "remote connection"..but checked the boxs and they are set to connect remotely...any ideas?
View 2 Replies
View Related
Dec 18, 2006
Does anyone know if there is a utility available in SQL Server 2000 equivalent to the Tablediff utility in 2005? While reinitializing a Subscriber, I got the error "The row was not found at the Subscriber when applying the replicated command." I would like to identify the location of the data to fix at the Subscriber. In the interim, I changed the Distribution agent from the default to "Continue replication on data consistency errors," which successfully replicated changes, except for the errors. Is the stored procedure sp_publication_validation the only option for SQL Server 2000? This ran successfully after the replicated changes were processed.
View 3 Replies
View Related
Jan 22, 2006
All,
When I try to start the SQL Server Express Utility (SSEUtil.exe), I get the following crash output message below ...
I have checked all of my instances. The all work with windows authentication and sql server authentication.
I have used the surface area configration manager to allow 'everything' and rebooted my machine.
I have tested each through osql. I have turned my firewall on an off. The problem stilll persists.
Could this have something to do with my SQL Services running under the local account?
Y:All_DatabaseMSsSQLServerSQLServerExpressUtilityJan2006Extracted>SSEUtil.exe -consolewnd -server HOME -user sa -password mypass -timeout 60
Unhandled Exception: System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Versi
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Console.SetOut(TextWriter newOut)
at SSEUtil.ConsoleHandler.EnsureRedirectOutputStream()
at SSEUtil.Program.Main(String[] args)
The action that failed was:
Demand
The type of the first permission that failed was:
System.Security.Permissions.SecurityPermission
The first permission that failed was:
<IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Flags="UnmanagedCode"/>
The demand was for:
<IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Flags="UnmanagedCode"/>
The granted set of the failing assembly was:
<PermissionSet class="System.Security.PermissionSet"
version="1">
<IPermission class="System.Security.Permissions.FileDialogPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Access="Open"/>
<IPermission class="System.Security.Permissions.IsolatedStorageFilePermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Allowed="ApplicationIsolationByUser"
UserQuota="512000"/>
<IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Flags="Execution"/>
<IPermission class="System.Security.Permissions.UIPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Window="SafeTopLevelWindows"
Clipboard="OwnClipboard"/>
<IPermission class="System.Security.Permissions.UrlIdentityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Url="file:///Y:/All_DatabaseMSs/SQLServer/SQLServerExpressUtilityJan2006Extracted/SSEUtil.exe"/>
<IPermission class="System.Security.Permissions.ZoneIdentityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Zone="Internet"/>
<IPermission class="System.Drawing.Printing.PrintingPermission, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
version="1"
Level="SafePrinting"/>
</PermissionSet>
The assembly or AppDomain that failed was:
SSEUtil, Version=1.0.2130.35318, Culture=neutral, PublicKeyToken=null
The method that caused the failure was:
Void EnsureRedirectOutputStream()
The Zone of the assembly that failed was:
Internet
The Url of the assembly that failed was:
file:///Y:/All_DatabaseMSs/SQLServer/SQLServerExpressUtilityJan2006Extracted/SSEUtil.exe
Y:All_DatabaseMSsSQLServerSQLServerExpressUtilityJan2006Extract
Any Ideas ?
Thanks,
AIMDBA
View 9 Replies
View Related
Mar 8, 2008
I'm trying to learn how to use the bcp utility... but I keep getting an error message that says:
SQLState = 08001, NativeError = 2Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].SQLState = HYT00, NativeError = 0Error = [Microsoft][SQL Native Client]Login timeout expiredSQLState = 08001, NativeError = 2Error = [Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
The command i'm running is:
bcp territore.dbo.import in territorydata.csv -T -c
territore is my database name... and dbo i think is the owner name.
and the table is called Import
I don't know how to check the default settings to see if remote connections are enabled. Any help would be appreciated.
View 6 Replies
View Related
Jul 20, 2005
I am looking for the SQL Server 2000 Licensing Setup Utility Programand cannot find it. Everything I read says, goto ControlPanel->Administrative Tools->SQL Server License Utility. When I gothere, I do not see... Any help would be Greatly appreciated!Setup:Win 2000 ServerSQL Server 2000 Standard Edition Svc Pk 3.Thanks.
View 2 Replies
View Related
Dec 2, 2005
Hi everybody,
View 5 Replies
View Related
Sep 30, 2004
Hello all,
We have a Windows 2003 Web Edition server serving a site through IIS. It connects to a Windows 2003 Standard Edition server running SQL 2000 SP3a.
This site receives the following error as seen in the topic:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
We've configured the server network utility to only allow TCP/IP connections. The connection string for the site is as follows:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
MM_connSpankMSSQL_STRING = "Provider=sqloledb;Data Source=SERVER_IP,1433;Network Library=DBMSSOCN;Initial Catalog=ourmaindb_1;User ID=ourmaindb_1;Password=hotcookies;"
%>
Any ideas or tips on solving this issue? We've noticed it is due to larger queries as smaller ones do work with no problems.
The servers are behind a BSD box running iptables, has 1433,1434 along with standard web ports wide open. Anything outbound is allowed.
Some further testing via ODBC on the IIS server improved things. No more connection pooling for the SQL Server driver allows for 1/3 of the query to run. Still 2/3s of it doesn't show up, and that general network error message appears.
Should have 330 rows if it works right.
View 2 Replies
View Related
May 19, 2004
Hi
While running a DTS, many times the error message: "[DBNETLIB][ConnetionWrite (WrapperWrite()).]General network error. Check your network documentation." appears.
Does somebody knows why?
I am running the DTS from a computer (not the server where the DTS is stored) and it is connected without any problem when this happens.
Thanks!!
Regards
Lautaro - Argentina.
View 4 Replies
View Related
Oct 4, 2007
Hi Every one,
I am using .Net 1.1 for my web application.
And my database server is SQL Server 2005.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Can any one please help me to solve this error?
With Regards,
View 3 Replies
View Related
May 26, 2007
Hi We have a written a error log in Global.asax. which capture below mentioned error in the prodcution server. Same applications is working fine in some locations and some loactions we are getting the error.Any body knows why this error is occurs.Any body knows why this error is occurs. Error Message:General network error. Check your network documentation.Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OpenAndLogin() at System.Data.SqlClient.SqlInternalConnection..ctor(SqlConnection connection, SqlConnectionString connectionOptions) at System.Data.SqlClient.SqlConnection.Open() at datalayer.sqldb.Execute(String ProcedureName, SqlParameter[] Parameters) at lms.User.GetUserDetails(String strUserid)ITs at LMS.Login.w_btn_Login_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
View 2 Replies
View Related
Oct 4, 2007
Hi,I am using .Net 1.1 for my web application.And my database server is SQL Server 2005. My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,General Network Error. Check your network documentation I have also searched many articles and tried following solutions but nothing working- connectiontimeout = 0, max pool size = 7500/100, pooling = false- SSL disabling enforce security false as mentioned in microsoft kb article. And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string) Can any one please help me to solve this error?
View 2 Replies
View Related
Feb 8, 2004
When I try to update the site setting, I get this Error and I don't know how to fix.
Server Error in '/DotNetNuke' Application.
--------------------------------------------------------------------------------
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
Line 281:
Line 282: myConnection.Open()
Line 283: myCommand.ExecuteNonQuery()
Line 284: myConnection.Close()
Line 285: End Sub
Source File: C:DotNetNukeComponentsAdminDB.vb Line: 283
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +721
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +196
DotNetNuke.AdminDB.UpdatePortalInfo(Int32 PortalId, String PortalName, String PortalAlias, String LogoFile, String FooterText, Int32 UserRegistration, Int32 BannerAdvertising, String Currency, Int32 AdministratorId, String ExpiryDate, Double HostFee, Double HostSpace, String PaymentProcessor, String ProcessorUserId, String ProcessorPassword, String Description, String KeyWords, String BackgroundFile, Int32 SiteLogHistory) in C:DotNetNukeComponentsAdminDB.vb:283
DotNetNuke.SiteSettings.Update_Click(Object sender, EventArgs e) in C:DotNetNukeadminPortalSiteSettings.ascx.vb:287
System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e)
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Please Help!
Thank you,
dlouanis
View 2 Replies
View Related
Jan 9, 2006
I use sqlclient to connect directly from my mobile 5 pocketpc to a sql server 2005 database on my desktop.
I use a sqldatareader to traverse the results of a query that delivers 2 fields: (1) the filespec, and (2) the image field.
I use a filestream with a binary writer to write the contents of the image data to the pocketpc's storage card.
I have a test table with 10 images, not one more than 4 MB. I cannot complete a test run prior to receiving the general network error.
The pocketPC is connected via activesync to the desktop, and I connect to the database with:
Integrated Security=false;
user id=sa
password=admin.
Any help with this strange error would be greatly appreciated.
Wil
View 5 Replies
View Related
