I have a database 30 GB in size. I need to copy this entire database to
laptop. I want to use backup and restore database on this laptop.
I need to know how I can accomplish this wihtout copying the backup file
to the destination server. Is there a way you can restore from a file over the
network from a different server?
I tried everything,with the security setup but was not able to do this.
Any recomendations will be valuable.
I am trying to create sql code that restores a backup of a master database to a new database on the same server. It “seems” to run correctly as no errors are produced. However, the most recent updates to the master database are not present in the new databases. All databases are using the Full recovery model. What is really strange is that if I do (what I think is) the same function in Enterprise Administrator, the restore works fine! For both methods I used the same backup file!
Any and all help is sincerely appreciated.
The master databases from which the backups are made start with “MODTRNMaster”
The databases which are created from the restores start with “M1_” and “M2_”. (We call them training room databases.)
My script for backing up the master databases:
-- Backup the master training database
backup database MODTRNMaster
to disk = 'f:kupMODTRNMaster.bak'
backup database MODTRNMaster_IMG
to disk = 'f:kupMODTRNMaster_IMG.bak'
backup database MODTRNMaster_MNC
to disk = 'f:kupMODTRNMaster_MNC.bak'
backup database MODTRNMaster_VM
to disk = 'f:kupMODTRNMaster_VM.bak'
go
This is the restore script for restoring the first training room databases. I’m hoping that there is just something simple that I’m overlooking in these restore statements! J
-- Restore the backup of the master training database into the
-- training room #1 database.
use master
go
drop database M1_MSLH
go
restore database M1_MSLH
from disk = 'f:kupMODTRNMaster.bak'
with move 'DEV5_Data' to 'f:mssqldataM1_MLSH.mdf',
move 'MM' to 'f:mssqldataM1_MLSH_1.mdf',
move 'AMB' to 'f:mssqldataM1_MLSH_2.mdf',
move 'DM' to 'f:mssqldataM1_MLSH_3.mdf',
move 'IMM' to 'f:mssqldataM1_MLSH_4.mdf',
move 'ED' to 'f:mssqldataM1_MLSH_5.mdf',
move 'DEV5_Log' to 'f:mssqllogM1_MLSH_log.ldf',
recovery
go
Thanks in advance
:eek:
:eek:
I am working towards automating the process of testing our backups. For the meantime, I do it all manually - I copy the backup files (full + transaction logs) to our test server and then run the restore script. Once database restored I run the DBCC CheckDB. The results of checkdb I manually upload to our Sharepoint portal as proof that the backup file is intact with no errors.
here are some ideas I have but have not yet tested:
Create a maintenance plan with each 3 jobs:
--> Powershell script to copy the files from Prod server to Test server - add this scrip to Job1
--> Powershell script to restore databases files - add this script to Job2
--> Run the DBCC in powershell (yet to find if possible in PS) - add this script to Job3
I would like to use seperate jobs as to get a report on the duration and status of each job
Would also like to get the results of the DBCC Checkdb as proof that no errors were found for upload to our Sharepoint portal. Dont know if possible via the job.
I am attempting to move some SQL 2000 databases to SQL 2005. My main production database does not seem to want to move. When I use the SQL 2005 GUI the .bak backup file is marked 'Incomplete'. When I attempt to restore the backup file I get a 'RESTORE detected an error on page (0:0) in database' message. I saw a thread in the SQL Express forum suggesting trying to restore from the T-SQL level to get the GUI out of the picture and I get the same 'error on page (0:0)' message. However when I take the same file and use SQL 2000 Enterprise Manager it restores with no problems.
Any ideas?
Thanks
Mike Mattix
I took some database backups from a client site to do some development.
There were 20G, 16G and 200MB
i ran it through EM but waited for like 20 minutes for the 20G and 16G but nothing happen. Went to Profiler -- there was no activity log for backup/restore events.
went to QA and tried to restore the backup -- with the stats option but still nothing happenned. The 200MB restore worked though. i have restored a databases over 20G but haven't really encountered this problem. Can anyone assist me ? or have come across this problem ?
Hi all,
A few weeks back I had a problem with setting up Maintenance Plans on my SQL Server, the only fix in the end was re-install the SQL along with SP1. Since then backing up or restoring our developers database takes around 15-20 minutes whereas before it would take 1-2 minutes.
The server doesn't seem to be the problem as I have restored it to a 2nd server and get exactly the same problem there. Other databases on the same server of around the same size backup as expected.
The database is approximately 150MB's with the log file being 800MB's.
The server in question is a Dual Core Opteron 2.2Ghz with 4GB's of RAM, running Windows 2003 x64, fully patched and up to date. The SQL version is 2005 Standard Edition x64 also including SP1.
Plenty of disk space and no CPU activity even at the time of backups taking place.
Any help is much appreciated.
Recently, we had some tables inadvertantly dropped from a 20+ GB data warehouse in the middle of one of our load cycles. In order to avoid restarting the load, we had to make restore a copy of the database from a full database backup and then manually move in the dropped tables using DTS.
This ended up being a painful process, and I am looking to avoid it by restructuring the database into filegroups so I can mimic the table restore function from 6.5.
I am looking for pros, cons, gotchas, and best practices regarding splitting a MSSQL 7 database into multiple filegroups. We would be including 1 or more tables and all of thier indexes in each filegroup. Specifically, I have the following questions:
1. All the literature I read mentions the need for doing transaction log backups and restores if I utilize filegroup backups. Is this really necessary? We have turned off transaction logging for performance reasons, and since we completely control the addition of new data into the db.
2. Are there implications for disk read performance involved with filegroups? Our data resides on an EMC disk array. I feel that we'll most likely have between 20 and 30 filegroups.
3. If we decide to move a table (and its indexes) between filegroups, is the process as simple a dropping the clustered index and recreating it on the new filegroup (then dropping and recreating the n-c indexes)?
Any information y'all can post would be greatly appreciated.
With Migrating from SQL 2000 to SQL 2005 I realise that there are a few options available.
A SQL 2000 backup is able to be restored into 2005 and is workable however there are some issues with internals that have changed. I have identified some DDL which would need to be modified to work correctly.
If the Backup is restored and left in a recoverable state does 2005 allow for 2000 TLog backups to be restored as well ? I am assuming that as you can restore a full db backup that this is allowed.
I am asking the question as i have a very short and fixed deadline of moving from 2000 to 2005. A new datacentre is being moved to and the old DC is being turned off. all new hardware is being placed in the new DC so i need to move from the old to the new with very little downtime to the DB or app.
My approach is as follows
1. Full DB Backup (2000) copied across to 2005 server and loaded being left in a recoverable state.
2. Tlog backups copied across on scheduled basis and loaded to a point in time.
3. Test new 2005 DB with app/web frontend
4. Bring both in sync again and then perform 1 final Tlog backup, copy and load bringing app online again with very little downtime.
Has anybody tried this approach ? does anybody see any issues with my approach ? all comments welcome on this.
Thx
Data encryption and database restores.
1. When using data encryption on a 2 node active/passive cluster does it make any difference which server the sqlserver is running on when encrypting or dcrypting data?
2. When restring a database to a different server with encrypted data is the data decrytable or is it lost?
Hello,
We have log-shipping set up between a source and 3 destination SS 2000 databases. Two of the destination servers actually perform their log restores across the network from the other secondary server. This allows us to only copy the files once from a remote location. All three servers stay caught up within 15 minutes of each other.
Recently, I added a fourth server to this that has SS 2005 SP2 (X64). I wrote a stored procedure that restores log backups from the same single location as the maintenance plan jobs. The problem that I'm experiencing is that this fourth server is not keeping up with the other three. It seems to take longer to restore the same log backups. The destination servers are all on the same domain. This fourth server was previously part of the same maintenance plan configuration as the others prior to rebuilding it for SS 2005 SP2 (X64). During that time, it stayed caught up with the other servers. There is another database on the new server that I am log-shipping to in the same manner and it stays caught up, though, for the most part, the log backups are smaller. There is a file on the fourth server with a ckp extension for the database in question that doesn't seem to exist for the other databases on this server and the other servers.
Any information on this behavior would be appreciated.
Is there any way to backup a remote SQL Server that is on a hosted account to a local drive? We have a web hosted account that has a SQL Server that we do not have full admin rights on, just dbo access to the data and structure. We would like to be able to do backups and restores to our local development server if possible. Perhaps vis DTS or some similar means? WE cannot use the normal backup/restore as we do not have right to these fucntions nor can we access the servers local drives directly.
View 2 Replies View RelatedOn one of our SQL Server 2014 boxes each database has a copy-only full backup made every night, in addition to the maintenance plan schedule of a full backup weekly, daily differential backups and log backups.
When performing a PIT restore in SSMS the restore file list lists the most recent copy-only backup as the full backup to use, not the most recent plan full backup. I noticed that using SSMS 2008 to start a PIT restore on the 2014 box does not have this problem, and lists the correct restore file sequence (ignores the copy-only backups).
I need to do a time test for restoring an Azure SQL database from a point in time. Can I automate this through PowerShell.
View 3 Replies View Related
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
SQL Server 2008 r2 - 6 GB memory...I attempted a backup on a 500GB database but it was taking way too long. I checked the resources on the box and saw the CPU at 100%. I checked the SQL Server activity log and saw a hung query (user was not even logged on) that had multiple threads so I killed it and now the CPU utilization is back to normal.
Trouble is, now all of the threads in the activity monitor for the backup show 'suspended' and the backup appears to be not doing anything.
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
View 2 Replies View RelatedNeed to restore database,here's the scenario:
Data got deleted on Friday evening, need to have database restored to FRiday afternoon and also some data has been entered on Monday, which needs to be there.
Windows 2003 backup utility uses the shadow copy option that allows it to copy open files.
Therefore, can I use this utility to backup the .mdf and .ldf files for my SQL 2000 database?
I can then attach the .mdf files if I need to restore the database to another server.
Can anyone tell me if this is safe? I've tried it and it worked but I'm worried there maybe some lurking danger in using this approach.
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedI've written a custom script to delete backup files from location. But unable to modify now to count the number of files are deleted. How to modify the script...
/* Script to delete older than N days backup from a specific directory */
USE [db_admin]
GO
IF OBJECT_ID('usp_DeleteBackup', 'P') IS NOT NULL
DROP PROC usp_DeleteBackup
GO
[Code] .....
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
I'm looking to schedule a maintenance plan for my databases which I have done.I'd like this database to be copied to another folder and the name altered to include the file name and the current date time stamp.Is this possible in the scheduled maintenance plan?
View 4 Replies View RelatedWhat is the difference between "Files aned File Groups" backup and Partial Backup?
Looks like both are same.. Please comment.
I have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies View RelatedThis is probably a simple question but I have to ask it anyway. When backing up I can backup to a file on my local drive but I also can create a device to the same location on my local drive. Is this doing the same thing. If I so desire to backup to the local drive(bear with me) what is the difference between creating a device and a file called mybackup or just choosing to backup to a file called mybackup? Should I always create a device? I know these are dumb question but....
Jason
How do we know the list of all the backups that are present in a particualr backup device like file# and time of backup taken etc for the purose of restore?
When I run :
RESTORE HEADERONLY FROM BackupDeviceName
it doesn't give that info. Can anyone tell me the exact command to list all the files of a backup device so that I can restore the right one??
Thanks.
Shalini.
If my backup starts at 8PM and take 1 hour to complete, will the changes made to the database during that hour be captured in the full backup?
Stated another way, will my backup be a snapshot of:
a) 8PM when the backup started
b) 8PM with some of the changes made between the hour
c) 9PM when the backup finished?
Anybody know the exact way SQL Server handles that logic?
Thanks,
Marc
Hi
I am using the Simple recovery model and I'm taking a weekly full backup each Monday morning with differentials taken every 4 hours during the day.
On Wednesday afternoon, a programmer ran a process that corrupted the db and I had to restore to the most recent differential. It was 5pm in the afternoon and a differential backup had just occured at 4pm. No problem, I figured.
I restored the full backup from Monday morning and tried to restore the most recent differential backup. The differential restore failed. Since I had used T-SQL for the initial attempt, I tried using Enterprise Manager to try again.
When viewing the backup history, I see my initial full backup taken on Monday plus all the differentials. BUT, on closer inspection, I noticed another full backup in the backup history that was taken early Tuesday morning. I can't figure out where this Tuesday morning full backup came from. It wasn't taken by me (or scheduled by me) and I'm the only one with access to the server. My full backups are usually named something like HCMPRP_20070718_FULL.bak. This erroneous full backup was named something like HCMPRP_03a_361adk2k_dd53.bak. It seemed like it was a system generated name. Not something I would choose. To top it off, I could not find this backup file anywhere on the server and when I tried to restore using this full backup, it failed.
Does anyone have any clues as to where this full backup might come from? Does SQL Server trigger a full backup on its own if some threshold is reached?
I ended up having to restore using the differential taken just before this erroneous full backup and lost a day of transactions.
Any insight is greatly appreciated.
I have only one tape drive.
My server is using the SQL server 2005 backup tool and arcserve backup tool to backup different files .
Everytime I need to disable and enable the tape device driver (in device manager /windows) before I can use SQL server 2005 backup tool.
Everytime I need to disable and enable the tape device driver (in device manager /windows) before I can use arcserve backup tool.
It seems that the tape device resource is held by softwares even the tape drive is not in use.
What should I do to make the tape drive shared by different softwares?
Regards,
Manuel
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies View RelatedBackup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies View Related