Sql Commands
Jan 13, 2004How can I get all SQL commands in SqlServer? How can I trace this commands?
Thansk
ADVERTISEMENT
What Is Going On Here? SQL Commands And ODBC Commands Aren't Compatible
Oct 1, 2004I'm building a simple webform, except Visual Studio and my service provider have combined to drive me nutty.
First, I MUST use an ODBC connection to my remote SQL Server do to some unknown configuartion problem. I've been playing with Visual Studio for only a month, so normally when something goes wrong I can go look in the mirror and find the culprit. This is different. I've got a totally functional web form with a SQL Connection, but when I try to change it to an ODBC Connection, I get the following error.
An OdbcParameter with ParameterName '@CertHolder' is not contained by this OdbcParameterCollection
My coding is fine because I stole it straight from the walkthrough and it works. But the specifications that Visual Studio provide are quite suspect. Please note the failure to include some key "@" signs.
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.cmdUpdate = New System.Data.SqlClient.SqlCommand
Me.cmdGetAll = New System.Data.SqlClient.SqlCommand
Me.cmdSelect = New System.Data.SqlClient.SqlCommand
Me.OdbcConnection1 = New System.Data.Odbc.OdbcConnection
Me.OdbcGetAll = New System.Data.Odbc.OdbcCommand
Me.OdbcSelect = New System.Data.Odbc.OdbcCommand
Me.OdbcUpdate = New System.Data.Odbc.OdbcCommand
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "this works fine"
'
'cmdUpdate
'
Me.cmdUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip, CertHolder = WHERE (CertHolder = @Cert" & _
"Holder)"
Me.cmdUpdate.Connection = Me.SqlConnection1
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Name", System.Data.SqlDbType.NVarChar, 50, "Name"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address", System.Data.SqlDbType.NVarChar, 50, "Address"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address2", System.Data.SqlDbType.NVarChar, 50, "Address2"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@City", System.Data.SqlDbType.NVarChar, 50, "City"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@State", System.Data.SqlDbType.NVarChar, 50, "State"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Zip", System.Data.SqlDbType.NVarChar, 50, "Zip"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
'
'cmdGetAll
'
Me.cmdGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.cmdGetAll.Connection = Me.SqlConnection1
'
'cmdSelect
'
Me.cmdSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE (CertHolder = @CertHolder)"
Me.cmdSelect.Connection = Me.SqlConnection1
Me.cmdSelect.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, "CertHolder"))
'
'OdbcConnection1
'
Me.OdbcConnection1.ConnectionString = "This works fine"
'
'OdbcGetAll
'
Me.OdbcGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.OdbcGetAll.Connection = Me.OdbcConnection1
'
'OdbcSelect
'
Me.OdbcSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE CertHolder = @CertHolder"
Me.OdbcSelect.Connection = Me.OdbcConnection1
Me.OdbcSelect.Parameters.Add(New System.Data.Odbc.OdbcParameter("CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, "CertHolder"))
'
'OdbcUpdate
'
Me.OdbcUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip WHERE CertHolder = @CertHolder"
Me.OdbcUpdate.Connection = Me.OdbcConnection1
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Name", System.Data.Odbc.OdbcType.NVarChar, 50, "Name"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address", System.Data.Odbc.OdbcType.NVarChar, 50, "Address"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address2", System.Data.Odbc.OdbcType.NVarChar, 50, "Address2"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("City", System.Data.Odbc.OdbcType.NVarChar, 50, "City"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("State", System.Data.Odbc.OdbcType.NVarChar, 50, "State"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Zip", System.Data.Odbc.OdbcType.NVarChar, 50, "Zip"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Original_CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
I NEVER EVER TYPED ORIGINAL_CERTHOLDER IN THE SQL PREPARATION
End Sub
Protected WithEvents btnSave As System.Web.UI.WebControls.Button
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents ddlCertHolder As System.Web.UI.WebControls.DropDownList
Protected WithEvents txtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAddress As System.Web.UI.WebControls.TextBox
Protected WithEvents ddlCH As System.Web.UI.WebControls.DropDownList
Protected WithEvents cmdUpdate As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdGetAll As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdSelect As System.Data.SqlClient.SqlCommand
Protected WithEvents txtAddress2 As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents OdbcConnection1 As System.Data.Odbc.OdbcConnection
Protected WithEvents OdbcGetAll As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcSelect As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcUpdate As System.Data.Odbc.OdbcCommand
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Comments? Suggestions, I am not positive about how to fix this.
Commands
Jan 7, 2008Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
Commands
Jan 7, 2008Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
SET Commands
Feb 8, 2006Hello,
I finally got access to Northwind/pubs.
I would like to know when and why do we use the following set commands. The SQL Server BOL does not say why and when to use these commands.
Thanks in advance!!!
sqlnovice123
Option Default Setting
Set nocount OFF
Set rowcount 0
Set ansi_nulls ON
Set quoted_identifier ON
2 SQL Commands In One Action
Nov 29, 2007Hi guys,I wanna ask bout the problem with my web application. I'm doing a select a statement from table 1 and and with the query results i got, i need it to store the result on table 2. How will i do this? I need your tips and suggestions.
View 1 Replies View RelatedMultiple SQL Commands At Once
Jan 8, 2006I'm running asp.net 2.0 and acessing MSSQL 2K. I am trying to run a query in which I need to set up variables first. I tried the following group of commands as shown, passing it to the SqlDataReader object, but it failed.. does anyone know how i can pass multiple SQL commands? MainQuery = "declare @MinGrades as Table(GradeID Bigint) " & _ " INSERT @MinGrades SELECT MIN(CreditGrades.SplitID) AS Expr1" & _ " FROM CreditGrades INNER JOIN" & _ " CreditGradeSplits ON CreditGradeSplits.CreditGradeSplitID = CreditGrades.SplitID " & _ " WHERE (CreditGrades.x0x30 = - 1 OR " & _ " CreditGrades.x0x30 >= 0) AND (CreditGrades.x1x30 = - 1 OR " & _ " CreditGrades.x1x30 >= 0) AND (CreditGrades.x2x30 = - 1 OR " & _ " CreditGrades.x2x30 >= 0) AND (CreditGrades.x3x30 = - 1 OR " & _ " CreditGrades.x3xNOD >= 0) " & _ " GROUP BY CreditGradeSplits.CreditGradeGroupID" & _ " Select * from @MinGrades "
View 2 Replies View RelatedSQL Commands Disappearing!?!?!?!
Nov 7, 2001I am experiencing a situation where I issue a lengthy SQL command to MS SQL Server 7.0 through MTS and it "disappears" - no errors or recordsets are returned. The command is "SELECT * FROM CUSTOMERS WHERE LASTNAME LIKE 'SMITH%'". When I issue this command from SQL Query Analyzer it takes 27 seconds to return 87 rows. When I issue this exact same command through MTS it does not return at all.
I've used the SQL Profiler to analyze the requests. It shows the commands from MTS starting but they never stop (or at least the profiler never reports them as stopping). The same commands coming from Query Analyzer are reported as starting and stopping without fail.
Here's a twist: I can issue less demanding commands (ie, one that doesn't take so long to process) through MTS and they come back fine. For example, when a user logs into my application, I use an SQL statement to verify the user name and password and status the user as logged in. This is routed through MTS and it comes back fine in less than a second. Same application, same PC, same MTS and SQL server, same SQL database. The only difference is that the CUSTOMERS table has over 800,000 records and the USERS table has only 5 records.
PLEASE HELP!
Using The DBCC Commands
Jul 26, 2004Hi,
I am very new to sql server and I have been reading up on the dbcc commands. For instance, DBCC SHOWCONTIG where do I execute this command? I went into the cmd prompt and opened osql and typed:
1> DBCC SHOWCONTIG
2> GO
This gives me the information for what I assume is the master database. But, how do I use this command under the other databases?
Also, I have been trying to learn how to determine when to do index maintenance by using the index tuning wizard. But, I don't know what a workload is. Can someone point me in the right direction or give me some information about this topic.
Thanks,
Laura
Normalizing Using Sql Commands
Aug 28, 2006Hi
Please can someone point me in the direction, i built a very badly designed database consisting of only one huge table when i first started databases, since learning about normalization i have designed and set up a new database which consists of many more tables instead of just the one. My question is where do i start in transfering the data from the old single tabled database to my new multi-tabled database?
I have MS SQL server 2005 managment studio if that helps, but want to transfer around 200,000 rows of data into the new database. Both new and old databases are on the same server.
thanks in advance
Run Commands Only Between Hours
Feb 29, 2012I have a job that runs between the hours of 10 PM and 9 AM. It launches a controller stored procedure that will call other stored procedure until the entire process is done.I would like the controlling stored procedure to only call the steps between the hours of 10PM and 9AM also.. So at 8:59 AM it will start the next step, but at 9:00 AM it will exit.
View 6 Replies View RelatedUndeleveired Commands
Nov 4, 2007hi all
when i set up a new subcription ,i notice in hte replication monitor thet this subscription 'uninitialize subscription' and the are 70 undelevier commands.
how can i fixed this problem,or how can i remove those undeleveirs commands?
thanx
Log All Commands Executed In QA
Jul 23, 2005Hi All,Is there way that commands executed in the query analyzer get loggedautomatically?TIAJoriz
View 3 Replies View RelatedOutput Of Sql Commands
May 19, 2006Hi,
Suppose there are two tables employee and salary and a,b are two instances of tables employee and salary.There are 20 records in each table.Then what will be the result of the following query
select a.*, b.* from employee a, salary b.
regards
arun
Commands That Cannot Be Used With Mirroring
Feb 6, 2007Hi al,
Are there commands that are not supported when mirroring is active? (truncate table, bcp, set identity insert on/off etc.)
DBCC Commands
Aug 7, 2007Hi
Can we use
DBCC CHECKIDENT ('dbo.MyTable', RESEED, 0)
Command in Stored procedure. Which executes daily.
Thanks
Sridhar K
Behind The Scenes SQL Commands
May 25, 2006Hello, I am running SQL 2000 SP4 on a Windows 2003 standard edition server.
The SQL database gets changed/updated through a web interface. I was wondering if there was any way for me to see which SQL commands were being run on the database when changed like deleting/inserting users are being applied from the Web frontend?
Any help is appreciated, thanks.
Robert
How SQL Commands Get Executed?
Apr 17, 2007When we send any SQL command to database engine , how exactly it gets executed?
View 7 Replies View RelatedIntegrity With Multiple Commands
Aug 10, 2006How can I make sure that a couple of commands are either all executed on the database or none of them. For example right now I have an insert, update and delete command. I'm calling each of them with a SqlCommand. So I am afraid that that one of them might be executed, then there's a bad connection and the other two are not. How can I prevent this so that only all commands or nothing is executed on the database?
View 2 Replies View RelatedTwo Update Commands For A SqlDataSource?
Jan 16, 2008Is there a way to have two sql update commands so I can use both during an update depending on which row it is?
View 1 Replies View RelatedRetrieving Database DDl Commands
Mar 25, 2008Hi everyoneI created a database graphically in VS2005.Now I want the text version of those DDL(create) commands. Question is where and how are those commands stored in SqlServer I have the management studio too. Any ideas??
View 2 Replies View RelatedQuestions On SQL Join Commands
Mar 29, 2008Please forgive me if my questions seem very simple. I'm trying to pick up vb.net, asp.net, and SQL all at the same time, and while making progress in some areas I'm finding other questions I have harder to figure out where to look for answers.
First question - if I want to join 2 tables do the fields I'm joining on have to have the same name? I know they have to be of the same type, but does the name itself matter? For instance in this line of code I try to join forums
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.forum_moderators = users.user_ID"
Second question nagging at me, since I specify the table <msg_forums and users> before the field names <forum_moderators and user_ID> does it matter which one comes first? See, my primary table in this line is msg_forums, so do I have to specify it's field first, or does that even matter (or do I have it backwards and need to specify the other one first)?
Last question, and of course the root of what's caused me to wonder about all of this. I'm getting an error similar to some of what I found in the forums, but it's slightly different in that it says there is a problem near "OR". As far as I can tell I've written this correctly, and so, I'm stumped. Here is the error followed by the code. Thanks a bunch for any assistance anyone offers. :-) Incorrect syntax near the keyword 'ON'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'ON'.
'This time trying to learn an adapter instead of a reader, will also try a join
'Build the connectionDim StrConnection As String = (System.Configuration.ConfigurationManager.AppSettings("DbConnect"))
Dim objConnection As New SqlConnection(StrConnection)Dim objdataadapter As New SqlDataAdapter()
Dim objdataset As New DataSet()
'set the SelectCommand Properties objDataadapter.SelectCommand = New SqlCommand
objdataadapter.SelectCommand.Connection = objConnection
'try after renaming to fields to match
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.user_ID = users.user_ID"
'Try without specifying the table
'objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON user_ID = user_ID"
'Original attempt
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.forum_moderators = users.user_ID"
objdataadapter.SelectCommand.CommandType = CommandType.Text
'open the database connection
objConnection.Open()
'Fill the dataset with object data giving the dataset to use and the table name (primary table even when pulling from a couple)objdataadapter.Fill(objdataset, "msg_forums")
'close connection
objConnection.Close()
'Set DataGridView properties
grdforums.AutoGenerateColumns = True
grdforums.DataSource = objdataset
grdforums.DataMember = "msg_forums"End Sub
End Class
New To Ms Sql Having Trouble With Very Basic Commands
Jan 21, 2004I'm more used to mysql, which i haven't coded for a while, but how do you show tables? or show databases you have available from the osql prompt?
View 3 Replies View RelatedLoad And Unload Commands
Nov 30, 1999How do you load and unload data using the commands load and unload in SQL Server? I am using UNIX Script to call isql.exe
Ex:
This code gives an error of "Incorrect syntax near keyword 'to'
unload to '/tmp/lot/test.unl'
select * from test
go
Undistributed Commands Not Decrementing
Apr 7, 2008I was pointed to this forum by one of the admins who has started doing some consulting work for us. We did a major conversion over the weekend for our main production server to SQL 2005 from SQL 2000. We have used replication to go from the live OLTP server to a few dedicated report servers for all of our reporting needs. In 2000 this was pretty well established (though a pain when we had to migrate in changes; I love the 2005 schema features for replication).
The only problem we have really encountered today, the Day After, involves replication. A few minor things involve lack of knowledge (like nonclustered indexes don't replicate by default, that was an OOPS). But one thing I haven't figured out yet.
Replication is working -- we are updating three servers, and all three servers are getting updates. I have run a validation on one of them and it passed in full. However, the "undistributed commands" count never goes down. It actually keeps going up and up. I verified that by first running this on the subscriber:
select transaction_timestamp
from MSreplication_subscriptions
And taking the results of one of the three rows that came back and executing this with it:
sp_browsereplcmds @xact_seqno_start = '0x00000231000006ED000100000001'
which brought back all of the "undistributed commands". Within that list, I looked for sp_MSins_ procedures. I found a few and looked up on the subscriber the value to be inserted -- and it existed on the subscriber. So it still is in MSrepl_commands even though it has been sent out.
I am afraid that eventually the system will "think" that the process isn't working and deactivate the subscriptions. Also this is useless as a monitor. Since this is our first major replication in 2005, I am willing to bet that we are missing something. Does anyone have any advice?
SQL Commands For Selected Date
May 9, 2008I want to display the data in a datasheetview in ms access project.
The data is between particular date. What command should i used for this?
My form contailn feilds : UserId,FromDate,ToDate
Enter the userid & Particular date & after click on submit data for that period should display in datasheet view.
Please help me in this as soon as possible.
Sql Commands Don't Update Tables
Mar 28, 2007Visual Studio 2005
i have insert and update statements. they don't produce any errors but no
changes happen in my tables. are there any possible reason for this. i used
sqlcommand and even stored procedures but still the same.
SQL Commands Request From A Novice
Oct 2, 2007Hello,
I'm running a (phpBB) forum which uses a MYSQL data base - I can access the database via a webpage through my ISP and it lets me run short scripts (through a web interface). I need to do the following (shown in psuedo code below). I would be eternally grateful if someone could translate it into pure SQL commands for me to paste into my SQL quiery input field on the web page I'm using to access my database. (I'm a complete SQL novice)
=====================
/* I need to be sure these commands will do nothing if 'jeff' does not exist in the user table */
/* extract the id value for the user called 'jeff' from the users table */
user = GET id FROM users WHERE username = "jeff"
/* remove all entries from the forums_watch and topics_watch tables that contain Jeff's userID */
REMOVE ALL ENTRIES WHERE userID = user
notify = 0;
/* insert many entries into the topics_watch table, one for each topic that exists in the topic table */
arrayOfTopicIDs = GET ALL id FROM topics
FOR EACH current_Topic IN arrayOfTopicIDs {
INSERT INTO topics_watch
(topic_id, user_id, notify_status)
values (current_Topic, user, notify)
}
/* insert many entries for jeff into the forums_watch table, one entry for each forum that exists in the forum table */
arrayOfForumIDs = GET ALL id FROM forums
FOR each current_Forum in arrayOfTopicIDs {
INSERT INTO forums_watch
(topic_id, user_id, notify_status)
values (current_Forum, user, notify)
}
=====================
I'm going to implement this with php and MYSQL as a mod for my forum application (phpBB) - but I could really do with a way of doing this immediately with pure SQL commands as a quick and dirty one shot paste into the input field of the MYSQL database web interface until I get the php mod going.
Can this be done using only SQL commands without tedious repetition?
Best Regards,
Alan
Sql Commands For Incremental Values
Jul 20, 2005Hi allNeed your help to do this; I got a table with these records:Supplier RegNo Status PoNumberABC sbh1309m 1DCD sbt99x 1FGJ sbg3939m 1FGJ sbg3939m 1OEE ey3939d 1Need to have a sql command to transform to :Supplier RegNo Status PoNumberABC sbh1309m 1 50001DCD sbt99x 1 50002FGJ sbg3939m 1 50003FGJ sbg3939m 1 50003OEE ey3939d 1 50004Any ideas?Thanks in advance.Rashid.
View 1 Replies View RelatedDBCC Commands Stability
Jul 20, 2005Hi all,I have a server from which keeping clients off for maintenance isdifficult. They all have VPN connections and can be online any timethey want, and uptime as always is important.Now I need to run dbcc shrinkdatabase, checkdb and of coursecheckpoint right before backups, and when the log seems to grow. Ijust tried dbcc checkdb on my home computer and apparently its reallyio and CPU intensive on this dual P3. Can users be running queries andthe occasional update and insert while checkdb is doing its thing? Oris it better to lock everyone out?How about shrinkdatabase? Any benchmarks on the stability of thesecommands while other clients are running? If tables are getting lockedduring these commands, the log file will grow even if shrinkdatabaseis running...Any commands to show which tables are locked, and by whom or what?I just tried our 2.5GB database on my dual P3 with 256MB ram homecomputer.. checkdb took 8 minutes and shrinkdb took 1.5 minutes. We'vea dualP3 server at work, IBM xSeries 232 with 1GB ram, but even 5minutes of downtime can hurt if shrinkdb needs to be run during workhours.Any thoughts?
View 5 Replies View RelatedPermission To Issue Commands
Feb 19, 2008How can i check if I have the permission to issue a specific command, like bulk insert/bulk load/openrowset etc.
Or
Is there a way to check the list of all the commands I am eligible to issue or use.
Thanks.
How To Do A Sqlcmd Inline Commands
May 24, 2008
hi,
i am not sure if this forum is right place to ask this question..
i am trying right a dos batch file to do setup of sql commands run by sqlcmd , run some dos commands etc
net start mssql$server
sqlcmd -E .....
net stop mssql$server...
sqlcmd -E ....
in unix you can run isql with the sql commands place inside..
isql -Uuser -S server <<EOF
select 1
select 2
go
EOF
you can put above in a shell and it will run.
i am trying to do similar stuff in windows for sqlcmd.. how can i do it
only option i have is to create lot of .sql files and
run with -i option on sqlcmd..
can some body let me know how to do a inline commands in dos?
thx
AK
Undistributed Commands Keeps Growing
May 21, 2007I have a sql2005 transactional replication replicating several databases between 4 servers, all of the replication are working fine except 1 that is going to a sql2000 sp4 enterprise database. The undistributed commands grows by several hundred thousand records a day, yet all of the records counts match exactly. At first this server was having a lot of lock issues, so i thought maybe that was the cause, but over the weekend i dropped replication and resnapshotted it. Without any activity ocurring on this database this weekend it continued to grow at the same rate