I have a requirement in the application that. I have columns in the following format:-
Col1 Col2 Col3
1 A1 A2
1 A1 B2
2 B1 C2
1 A1 D3
These type of contents the table have contents . What I require id if for any row if ‘Col1’ and ‘Col2’ values are same then the n the query should show only one record with ‘Col3’ values concatenated as comma separated array.
For the above e.g. the result should be.
Col1 Col2 Col3
1 A1 A2, B2, D3
2 B1 C2
I have this code below and it appears to work, but I wondered if there was a better way.
Basically I have a table with some sales. The amount sold is stored in a varchar (for a very stupid reason) called ticketNo, the date of the sale is stored in txDate (thankfully this is a date).
We need to report out the total amount sold for a period in weekly groupings with the week starting on Monday. If a week starts within the period specified but does not finish we extend the period to include the whole week.
As I said the code below appears to work (no I have not tested extensively), but it looks like it will be pretty resouce intensive.
set @minTxDate = '02-Jul-2007' set @maxTxDate = '31-Aug-2007'
declare @StartOfYear DateTime declare @LocalMaxTxDate DateTime declare @WeekDay int declare @StartWeek int declare @EndWeek int
set @StartOfYear = '01-Jan-' + Convert(varchar(4),Year(getDate())) set @WeekDay = DatePart(weekday,@StartOfYear) set @StartWeek = DatePart(week, @minTxDate) set @EndWeek = DatePart(week, @maxTxDate)
set @LocalMaxTxDate = DateAdd(d,10,@maxTxDate)
set DATEFIRST 1 select DateAdd(d,((DatePart(week, tmpSale.txDate)-1)*7)+@WeekDay-1, @StartOfYear) 'FirstDayOfWeek', DatePart(week, tmpSale.txDate) 'WeekOfSale', COALESCE(sum (Convert(decimal, ticketNo)),0) 'TonnesSold' from (select Sale.txDate, Sale.ticketNo from Sale where Sale.txDate between @minTxDate and @LocalMaxTxDate) tmpSale where DatePart(week, tmpSale.txDate) between @StartWeek and @EndWeek group by DatePart(week, tmpSale.txDate), DateAdd(d,((DatePart(week, tmpSale.txDate)-1)*7)+@WeekDay-1, @StartOfYear)
how I could achieve a ranking number, where I have some grouping involved.I want to have the groups in sets of 4, but if I get to a new person the ranking increases, even if I haven't filled the group. For example:
Name Year Sales Ranking -------------------- ----------- ----------- -------------------- John Smith 2009 1296 1 John Smith 2010 1296 1 John Smith 2011 1296 1 John Smith 2012 1296 1 John Smith 2013 1296 2
[code]....
So, when I get to John's 5 year, the Rank increased. I then only had two more rows before I get to Nina, but the Rank number goes up, as the details are for a different person from the prior user.
Select *, DENSE_RANK() over (Order by Name) + ((RANK() over (Partition by Name Order by Year) - 1) /4) as Ranking from #Test Order by Name, Year
Drop Table #TestThis works for John, but Nina then has a Ranking of 2 for her only year, where as she should be 3. Steve also then has a value one too low for all of his ranks.
I am trying to come up with a Matrix report using RS 2005 that looks like this one below. I have row data: question, columns data: Ethnicity and Gender, detail data: Gender average response and Ethnicity average reponse. I utlilized Report Wizard to create a report in a Matrix format , however I wasn't able to have Gender and Ethnicity column on the same line. The report wizard groups columns so Gender is a subset of Ethnicity or Ethnicity is a subset of Gender. How can is solve this issuee so that Gender and Ethnicity data is presented in a Matrix format and Gender and Ethnicity are not part of each other.
Thank you!
F M Asian Multi-cultural Non-resident Unknown White Black Hispanic Native American
a. Worked on a paper or project that required integrating ideas or information from various sources 3.95 3.99 3.54 4.50 3.28 4.20 4.18 4.04 3.92 3.90
b. Used library resources 4.26 4.09 4.12 4.33 4.10 4.33 4.26 4.22 4.10 4.10
c. Prepared multiple drafts of a paper or assignment before turning it in 3.97 3.76 3.80 4.50 3.58 3.86 3.95 4.09 4.00 4.00
When defaulted to Visible or Invisible, +/- displays correctly. But when using the Expression, + is always showing as the default even when a group is expanded. Is this expected? TIA.
Hello, I'm trying to clean my data using fuzzy lookup algorithm though SSIS, but i get null values everywhere. This is what i did:
I applied the fuzzy lookup in a table (tblValues). As source table i have the tblValues, and as reference table in Fuzzy Lookup i have the tblValues as well, resulting null values in all fields/columns.
Do i have to create my own reference table? If yes, how do i do that and what values will i have in this table?I didn't understand how the reference table must be in order the algorithm to work. Any suggestions?
Dear people, I have a problem with a report where users want to see transacctions grouped by Account number and type(e.g: incomes and payments).
And so I use a table object where I put 2 groups: 1) Group by Account Number: Field!Account.Value 2) Group by Transaction Type: Field!Type.Value I put in the detaill row group by: Field!Type.Value and Field!Account.Value.
When I execute the report only show the first row per transaction type, but the dataset has some rows per transaction type.
I€™ve created with the help of some great people an SSIS 2005 package which does the follow so far:
1) Takes an incoming txt file. Example txt file: http://www.webfound.net/split.txt
The txt file going from top to bottom is sort of grouped like this Header Row (designated by €˜HD€™) Corresponding Detail Rows for the Header Row €¦.. Next Header Row Corresponding Detail Rows
€¦and so on
http://www.webfound.net/rows.jpg
2) Header Rows are split into one table, Maintenance Detail Rows into another, and Payment Detail Rows into a third table. A uniqueID has been created for each header and it€™s related detail rows to form a PK/FK relationship as there was non prior to the import, only the relation was in order of header / related rows below it when we first started. The reason I split this out is so I can massage it later with stored proc filters, whatever€¦
Now I€™m trying to somehow bring back the data in those table together like it was initially using a query so that I can cut out each of the Header / Detail Row sections into their own txt file. So, if you look at the original txt file, each new header and it€™s related detail rows (example of a cut piece would be http://www.webfound.net/rows.jpg) need to be cut out and put into their own separate txt file.
This is where I€™m stuck. How to create a query to combine it all back into an OLE DB Souce component, then somehow read that souce and split out the sections into their own individual txt files.
The filenames of the txt files will vary and be based on one of the column values already in the header table.
-- Get the new Customer Identifier, return as OUTPUT param SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned -- users. IF @FK_UserIDList IS NOT NULL EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record -- Retrieve Address reference into @AddressId -- EXEC spInsertForUserNote -- @FK_UserID, --@NoteID, -- @BeenRead -- @Fax, -- @PKId, -- @AddressId OUTPUT
COMMIT TRANSACTION
-------------------------------------------------- GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1 FROM testsupplierSCNCR I am getting the result of 01/01/2007
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows. SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches FROM dbo.MAKES INNER JOIN dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC "> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" /> <asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" /> <asp:Parameter Name="ATT_ID2" /> <asp:Parameter Name="VAL2" /> <asp:Parameter Name="ATT_ID3" /> <asp:Parameter Name="VAL3" /> <asp:Parameter Name="ATT_ID4" /> <asp:Parameter Name="VAL4" /> </SelectParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource> <br /> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID"> </asp:DropDownList> <asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False" ReadOnly="True" SortExpression="DERIVATIVE_ID" /> <asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" /> </Columns> </asp:GridView> </asp:Content> AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback). Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage. Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: Â Â at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() Â Â at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!! -- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on go if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1 if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name FROM... WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
End Sub /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// I executed the code successfully and I got a box which asked for "Enter the query string". I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says. Command(s) completed successfully. What I really need it to do is to display the results of the query. Does anyone know how to do this? declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error. We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1 @Franchise ObjectId , @dtmStart DATETIME , @dtmEnd DATETIME AS BEGIN
SET NOCOUNT ON
SELECT p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec , count(1) "Count" , sum(Amount) "Total" FROM tb_Event t JOIN tb_Prod p ON ( t.ProdId = p.ProdId ) JOIN tb_ACDef a ON ( t.ACDefId = a.ACDefId ) JOIN tb_Curr c ON ( t.CurrId = c.CurrId ) JOIN tb_Event e ON ( t.EventId = e.EventId ) JOIN tb_Setl s ON ( s.BUId = t.BUId and s.SetlD = t.SetlD ) WHERE Fran = @Franchise AND t.CDate >= @dtmStart AND t.CDate <= @dtmEnd AND s.Status = 1 GROUP BY p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
Hi there. I have occasional sincronization error.-XSUBSYSTEM Merge -XSERVER MYSERVER -XCMDLINE 0 -XCancelEventHandle 000006E0 2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01' 2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01' 2006-12-22 14:55:02.974 Initializing 2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01' 2006-12-22 14:55:06.005 Retrieving publication information 2006-12-22 14:55:06.130 Retrieving subscription information. 2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. 2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric. 2006-12-22 15:00:07.800 Category:SQLSERVER Source: Subscriber01 Number: 8114 Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
*Before* I actually call up Microsoft SQL Customer Support Services and ask them, I wanted to ping other people to see if you have ever ran into this exact error
"Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I would have searched the forums myself, but at this moment in time, search is broken :(
If anyone has run into this error before, what conditions would exist that this could happen? That is, if I can sniff this out with suggestions from the community, I would be happy to do so.
It is an oddity because if I alter a couple subqueries in the where clause [ i.e., where tab.Col = (select val from tab2 where id='122') ]to not have subqueries [hand coded values], then the t-sql result is fine. It's not as if subqueries are oddities... I've used them when appropriate.
fwiw - Not a newbie t-sql guy. ISV working almost daily with t-sql since MS SQL 2000. I have never seen this message before...at least I don't recall ever seeing it.
Thanks in advance for other suggested examination paths.
Hi all I'm using Sql server 2000 and sometimes i need to run my Queries in Query analizer before using them in my application just to test them...BUT most of the time when i run a query in query-analizer for second time ,query analizer populates the result (records) more quicker then the first time. Apparently it caches the query !!! i don't know but for some reasons i dont't want this , so how can i prevent Query-analizer from doing so? Thanks in advance. Regards.