I am unable to access the default port 1433 on my SQL 2003 server. There is no firewall. I run telnet <ip> <port> and get "Connection failed" which explains my inability to connect to the server for weeks. I have being unable to connect to the server after I uninstalled sql 2000 and reinstalled it on my 2003 server. Some of the things I have checked is Network Configuration in EM. Named Pipes and TCP/IP is installed with port set to 1433. HKLMSoftwareMicrosoftMSSQLServerClientSuperSocketNetLibTcpDefaultPort port is set to 1433. Is there anything I need to configure on the server side to have the default sql server port enabled.
This is the code I have been using to connect to my default instance for 18 months. A recent upgrade to Windows Live onecare now prevents me connecting to the server from the same machine. The following error message is generated:-
Unhandled Exception: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnection.Open()
at TrainerReport001.Form1.Form1_Load(Object sender, EventArgs e) in F:#ProjectsStatsOwnerReport001Form1.vb:line 84
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)The program '[3336] TrainerReport001.exe' has exited with code 0 (0x0).
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at TrainerReport001.Form1.Main() in F:#ProjectsStatsOwnerReport001Form1.vb:line 2
If I turn off the onecare firewall I can connect as normal, but this is not a desired option. I have tried enabling port 1433 on the firewall, this does not work either. Any help greatly appreciated, onecare support seems reluctant to help.
can any one guide me how to change the default port address of apache which is 80 to any other port number. coz the default port number is taken by iis also.
I am unclear as to which Ip address to change the standard port on. When setting up a cluster you have multiple IP address's including the nic that is used for the heartbeat. I have not found any documention on how to change both nodes to listen on a port other than 1433..
Hi, I'm supporting a SQL 6.5 application through a firewall & I'm new to NT & SQLServer. What's the easiest way to find out what port SQL is listening on? It should be 1433 but the NT guys say 1433 isn't in use. What's the easiest way to change the default port? A search through Books online talks about editing registry keys & I'd prefer not to do this if this can be avoided. Any tips would be appreciated.
hai all, I need to change the default port number of the SQL server from 1433 to some other port number. i know that it can be done thru SERVER NETWORK UTILITY. Can some one confirm that. It will be helpful. Also i want to make sure that port to given is free port. how can i find that particular port is free.
Most of our reports need to be rendered directly to PDF. And since we have multi paged reports, we have implemented document map to have navigation. while exporting to the PDF, Users want the Bookmarks to be visible by default. However, this is not the case. The bookmarks tab in the Navigation tools of Acrobat is not expanded rather we need to manually click on it to see the bookmarks. This behavior is different from Crystal Reports XIr2 where the bookmarks are defaulted to be visible when opening a PDF exported by crystal.Is there any way to replicate this behavior in SSRS too?
Hello,I have SQL Server 2000 Enterprise Edition, and I'd like to change thedefault port to something else (we'll use 2033 for this example). I'vetried to connect from another computer on the same subnet using"ServerName:2033" as the server, but it doesn't connect. It will connect ifI change the Server to use the default port and change the server to connectto on the client to "ServerName", but either I"m not referencing the newport number properly or ????Any help you could provide would be great.Thanks In Advance!Rick
I installed a default SQL Server 2012 instance on Windows Server 2012.I enabled the SQL Browser and changed the TCP port of the instance to 1435. I changed port 1433 to 1435 I was able to connect to the instance using SSMS on another server. Now I have to enter Servername,1435 to make a connection.Why does the SQL Browser not resolve the servername to the right IP address and port 1435? Why am I not able to make a connection when I enter the servername or <servername>MSSQLSERVER? Is a SQL Browser only resolving named instances?This works fine for a named instance. Is there something special about default instances or the SQL Browser?
Having problems running the BPA for 2012. We setup using a clustered environment, SQL Server installed using default instance, and a static port not 1433. When I try to run the BPA using the instance name it says it doesn't exist, and won't let me add a port number. However, if I use MSSQLSERVER as the instance name it runs with no port specified and returns results. I assume that it doesn't require a port because the default instance would pull from the Browser Service and the using MSSQLSERVER is the same as running the default on a standalone server. Are those assumptions correct?
Hello, I have to find out whether my servers have hyperthreading enabled or not???? I am running Windows server 2003 Standard edition on many of my machines. I have to configure the SQL Server, server configuration values according to the Hyperthreading. I know about the CPUcount.exe utility but is there anything else apart from it??????
I have a database with Broker_Enabled set via the following command:
ALTER DATABASE 'xxxx' SET ENABLE_BROKER
All works well, I made a backup and want to move to my development machine. When I run I still get an error saying I need to enable broker service again.
"The SQL Server Service Broker for the current database is not enabled, and as a result query notifications are not supported. Please enable the Service Broker for this database if you wish to use notifications."
How can I move the database and get this setup? Where are the BrokerID's Stored?
UAT environment : SQL Server 2008 R2 SP3 Enterprise Edition
SANDBOX environment : SQL Server 2008 R2 SP3 Standard Edition
I have a database backup (.bak) that was taken from UAT environment that has CDC enabled on some tables. I want to restore that database into my SANDBOX environment which does not support CDC (because of standard edition). The restore process fails due to this incompatibility. Is there any way to restore without CDC (I dont CDC enabled on my SANDBOX; just my data from the backup) ?
I have 2 databases on a remote server on which Replication and Replication Monitor is enabled. Now I want to move this databases from different remove location.
How do I transfer bboth databases with replication and replication monitor enabled on it with all the user logins.
I have installed both sql server 2000 and sql server 2005 Developer Edition in my system as well as .net 2003 and 2005. Now i want to enable clr integration in sql server 2005. so when i write
sp_configure 'clr enabled', 1 GO RECONFIGURE GO
In Sql Statement then it gives me error Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78 The configuration option 'clr enabled' does not exist, or it may be an advanced option.
Valid configuration options are:
I have created a database user which have all the rights and roles. and while i check the stored system procedure sp_configure it is affacting mainly two system tables in the master tables
master.dbo.spt_values master.dbo.sysconfigures and this table does not contains field like ''clr enabled'' so tht we can change the state
so plz plz help me to enable clr in the sql server 2005. I need it so muchhh...
I have a DB with TDE enabled on Enterprise edition sql server 2008r2. I am actually planning on moving the DB to sql server 2008r2 standard edition. How to accomplish it properly. I don't think SQL Server 2008r2 standard edition support TDE. I can only think of turning off the encryption, but is there anything else I should know?
Sql server 2008R2 (SP2) Ent, PROD DB myDB was encrypted. During Release mistakenly (Vendor created script blames some settings in ...- actually does not matter) Decryption started (ALTER .. SET ENCRYPTION OFF) as we got from ErrorLog.
For some reason initial encryption scan was aborted and then mentioned command: ALTER ... OFF was issued again. What we have now (after 60 h of decryption- encryption took only 2.5 h)- is_encrypted = 0 in sys.databases, encryption_state = 5 (decryption in progress) in sys.dm_database_encryption_keys (percent_complete= 0). But it seems myDB is still encrypted- I made a backup of myDB and tried to read it (restore filelistonly) from other server (with no encryption)- failed- asked for key. Seems metadata was changed when initial scan during decryption started but then stuck and (if I am correct) decryption was never completed. Question- any similar experience? How we can fix meta- data, i.e. assuming that myDB is still encrypted we should have is_encrypted = 1 and encryption_state = 3 (encrypted).
My index reorganise maintenance plan fails partly due to the disabled indexes
Executing the query "ALTER INDEX [I_ModelSecurityCommon_RECID] ON [dbo]...
" failed with the following error: "Cannot perform the specified operation on disabled index 'I_ModelSecurityCommon_RECID' on table 'dbo. Model SecurityCommon'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I don't want to delete the indexes as they are standard indexes that where on the DB from install.. any script that will reorganise all enabled indexes? and also to rebuild?
Using SQL Server 2005 SP2 std edition on Windows 2003 R2 SP2 x64 std edition I'm allowed to break the password policy.
To reproduce this behaviour as a system administrator run...
create login testuser with password='p'
This creates a login with the default of POLICY enabled ('Enforce Password Policy' check box is checked). OK, so may be system administrator is allowed to break the policy but now login as testuser and run
alter login testuser with password='t' old_password='p'
This succeeds despite obviously breaking the policy.
Surely this can't be right, I must be doing something wrong.
I am new to DBA activities. I have a database name Sample_DB in SQL Server 2014. Â
This database has below files
LogicalName FileType FileGroup Sample_DB_Rows  ROWS Data PRIMARY Sample_DB_C1 ROWS Data Country1 Sample_DB_C2 ROWS Data Country2 Sample_DB_Docs FILESTREAM Data FileGroupForDoc
My database has 3 tables namely Tbl1, Tbl2 and Tbl3.
Tbl1 data stored in primary file group Tbl2 is partitioned based on a key column CountryId and stored in respective filegroup Tbl3 is enabled to store documents, files etc., and its data will be stored in filestream enabled filegroup.
Problem: I need to take backup of each file group separately. I need to restore the backed up file group separately. Is this possible, how to do it.
When I try to create a subscription to my SQL Server Compact 3.5-database file, it gives an SqlCeException-message that says that the file is not enabled for replication. How do enable it?
My SQL Server Management Studio won´t connect to my compact server file right now, so that method is not an option for me right now.
Hi, I am trying to replicate some tables from an Sql Server database to an Oracle database. So the publisher is SQL Server and the Subscriber is Oracle.
Unfortunately I realised that I can't set the replicate_ddl parameter to 1 for an Oracle Subscriber. This is the error I got: "The property "replicate_ddl" cannot be modified for publications that are enabled for non-SQL Server subscriptions."
I looked on the Internet and I found that this parameter "@replicate_ddl" (used in the add_publication stored procedure) can't be set to 1 if the @enabled_for_het_sub parameter is set to 'true'.
So I thought if I just set the replicate_ddl parameter to 1 and leave the other parameter to false and then use the sp_changepublisher stored procedure to set the enabled_for_het_sub parameter to true that will work. But it didn't. I tried this in Enterprise Manager and although I had no error I realised that the replicate_ddl parameter was reset to false.
Is there any way I can replicate the ddl statements in Oracle automatically or I should to them manually?
Hello. I'm a novice with SQL Server. I set up a SQL Server instance using Enterprise Manager and I want to find out what port that instance is listening to, because it's not listening to the default.
Is there a way I can specify a port for the server to listen to?
Hello. I'm a novice with SQL Server. I set up a SQL Server instance using Enterprise Manager and I want to find out what port that instance is listening to, because it's not listening to the default.
Everything is on my local machine, this is a development database.
Is there a way I can specify a port for the server to listen to?
I have access to the default instance of a SQL Server ..... I have access to the QA only .. by reading the registry through the QA I get to knw that there are additional 4 more instances on the Server ..... is is possible to get the port on which they are listening using the QA ....
I knw that we can go to the servers network utility & see it there in the TCP /IP ... but i dont have access to that , neither do i have access to the error logs that tell me , on which port is SQL Server listening to
We have default instance "MSSQLSERVER" with Port number 1433. We Installed another Instance "MGMT" on the same windows server, it came as same Port number "1433".
We decided to Change the Port number for Instance "MGMT".
1. We changed the port number for "MGMT" to like "1234"
2. After the change we did telnet to "MGMT" Instance with "1433", it worked.
3. Then we changed the Port number for Instance "MSSQLSERVER" also to like "4321".
4. After change of these setting and followed with rules framed in link as said: http://www.databasejournal.com/features/mssql/article.php/3689846
5. Now we did telnet with changed port number, it works fine.
6. We can not do telnet with Port number 1433 for both Instances "MSSQLSERVER" and "MGMT".. This is fine, what we want, and what we intent to do...
Question to MVP OR SQL Gurus:
A) If you want to change port number to Second Instance, shall we need to change for Default Instance?
B) How the port numbers will be configured? please advice.
I have a server running SQL Server 2005 Dev behind a firewall that blocks the default SQL Server port. So, I changed the port that SQL server uses to another port. How do I connect to the database instance with SQL Server Management Studio. I have tried:
On all of these, I get an error 25 - Connection string is not valid. I have the surface area configured correctly (i.e. named pipes and TCP/IP are both turned on), and the sql server browser is running. I can ping the server just fine, and when I go to GRC.com and do a shields up report it lists my port of choice as being open.
What am I missing?
I also set the native client configuration's default port to the port I want to connect to, and it appears that that didn't work either.
