Hi,
I am developing a web project in VS 2005 Professional.
The site will be hosted on a machince that does not have an instance of Sql Server Express. Can I still use the standalone sql database file (.mdf) file? Are there drivers in ASP.NET that allow this or do I have to ask that an instance of either Sql Server or Sql Server Express be installed?
Thanks, Mike
Yesterday I asked question to make a copy of the server but actually I want to make a Standalone server 6.5.
Please Advise.
How to create the DB and How to restore. Even I want to restore master but for restoring master how to start sql server in single user mode. If any body has document please post me.
Thank you very much!!!!!!!!!
Joe
I have a need to demonstrate an application I built in ASP.NET with SQL Server as the back-end database. The problem is when I don't have a network connection, I get an exception thrown..."SQL Server does not exist or access denied." This is the connection string I use (via ASP.NET/ADO.NET): "server=localhost; uid=xxxx; pwd=xxxx; database=mydb"
I've tried Query Analyzer and it too, doesn't work - I get an error message that reads: "[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied." However, via SQL Server Enterprise Manager, I can connect and do what I want to the database.
As soon as I connect my laptop to any network, the web application works fine (no errors), as well as the Query Analyzer.
Any insights are greatly appreciated. Thanks.
Here is my Question...
I have 3 server hardware and the whole purpose is to make one as a web server and another one a SQL server. The purpose of the 3rd server is purely a backup server, what that means is, in case if my web server nor my database server fails, I should be able to use the 3rd server as a backup. How do I achive this without using MS cluster service.
I can use NLB for Web, but what about SQL server ??
All I need to know is ,other than MS cluster service, is there any way I can create a backup SQL database server ( secondary database server) in case the primary fails with very minimal down time? I need my secondary ( backup) server up and running when the primary fails. I don't want to use Cluster service because of the cost for storage and license.
Any idea will be welcomed. I could have used the datamirroring option of the 2005 , but this is for a production deployment and is not recomended by microsoft. also, restore the backup from primary and make it work is not welcomed.
Thanks
Plakeezhu.
Can someone please tell me if i can use SQL Server 2005 on my standalone laptop, and how do i connect, i dont know how to set up the password so i can connect
Many thanks Rob
Please could anyone tell me what are the real differences between SQL Server 2005 bundled along with Visual Studio.NET and a standalone one.
Thanks in advance.
I have attached the SAN, configured the Windows Clustering and I'm ready for SQL. SQL Server 2005 was already on this machine as a stand alone. I removed all of the software and I'm reinstalling SQL. The cluster option is not enabled. Any ideas why?
View 1 Replies View RelatedI have never installed sql server before and I didnt know if I just take the sql server 2005 standard edition media and boot off it and do a fresh install that way or do I have to install Windows server
View 3 Replies View RelatedI have a vbs script to try to prove that I can perform vbs scripting in either a job step or a dts package
The script is
dim rs, sql,adoconn, adocommand, dataconnstring
set adoconn = createObject("ADODB.CONNECTION")
Set rs = CreateObject("ADODB.Recordset")
set adocommand = CreateObject("ADODB.Command")
adoconn.ConnectionString = "Provider=SQLOLEDB;Server=myserver;Database=pubs;U id=myuser;Pwd=mypass;"
adoconn.Open
sql = "select * from import"
rs.Open sql, adoconn,adOpenForwardOnly
while rs.EOF = false
sql = "insert into zz default values"
adocommand.ActiveConnection = adoconn
adocommand.CommandText = sql
adocommand.Execute
rs.MoveNext
wend
rs.Close
adoconn.Close
set adoconn = nothing
However,
when I run this from windows explorer it works fine,
but when I try to run it as an activeX script, I get the error ActiveX scripting: Function not found
As a cmdexec step in a job, I use the line c:inetpubwwwrootvbsvbstest1.vbs
It failed with the error
The process could not be created for step 1 of job 0x119BDBD264AD9B4597A9302786F0E250 (reason: %1 is not a valid Win32 application). The step failed.
What is wrong with the vbs script ?, or do I need to invoke it a different way ?
thanks in advance
I have an issue with the BCP util, it is extremely slow when running a BCP in to the same database on an A/P cluster vs. Standalone system. It is a vendor application, so I have little control as to what I can do. The BCP runs from a jobserver (remote) through the network, but it runs the same way in the standalone system, yet the process is about 10X as slow with the cluster, and the only diff is cluster vs. standalone.
SQLClusterName is specified in -S, not the active node, and it uses a trusted connection, not a local account. Is there anything about a cluster config that would cause the BCP to run slower ?
Any thoughts ??
Thanks,
Paul
I have installed SQL Server 2005 on my laptop that has Vista OS.
I want to log on only to teach myself. Is there a way that i could use the program without having to set it up on a server.
Hello,
i am planning to build Pocket Pc App and i would like to know if i can use Sql Mobile as my data store. The data base design is quite complex.
I wont be using any recplication/synchronization in my app since its a standalone app.
pls suggest.
Thanks
Karthik
Is it possible to run SQL Server Compact Edition as a standalone application from a DVD?
i.e. it would not leave anything installed on the users computer after the DVD was ejected.
Hey guys,
I'm really new to this so this might look dumb, but I need to know what all has to be done to develop a standalone database application.....The frontend is going to be on VC++...which are the best tools I'll need to use. I need to know if the user has to install the database app to use the program to make this possible......Also will he have to keep it running everytime to use the program.
Thanks a lot for you time and patience,
Dhaval
I've just spent the most frustrating 4 hours trying to install SP2.
I kept getting "unable to start SQL Server service....see BOL ...re starting the service manually" messages; with the only options being to Retry or Cancel. Retry resulted in the same message. Cancel resulted in all components except SQL (sqlexpress) being installed - therefore totally useless
No mater what I did i could start the SQLservice as it did'nt show in the list of Services; nor did the SQL EE programme show in the Add/Remove Programs...evenn though the other components did.
I deleted/removed everything that was istalled; cleaned up the Registry; and tried again...
..and again
..and again
FIVE install / re-install failures; numerous registry cleanups!!!!
I was at the point where it looked like i'd have to reformat my hard disk, and completely re-install XP, all aplications i.e. Office 2003 etc in order for the thing to work.
I gave it one more shot, but this time, during install
- selected all components except SDK
- I unchecked the Start SQL / BROWSER at startup
- Checked the Enable User Instances and Add to Administrators boxes
Lo and behold....it installed!!!
I'm still very worried as the registry is full of "duplicate" entries i.e. Blah blah blah and blah blah blah.1
But at least the thing is installed.
Would interested to hear if anyone has had similar or other problems with the SP2 install/upgrade
----------------------
For info:
I ran the install as Administrator
IIS not installed
Win XP Sp2 fully updated
Dell Inspiron XPS M1710 laptop with 2gb Ram; 2ghz Duo core processors
I need to create a report in SSRS 2015 but I need to bind that report to an external dataset .
I need it to work with parameters and stored procedure.
Another issue is that the report is standalone -rdlc.
Can I call the report from a webservice .asmx not wcf and render it automatically in pdf format?
Help!!!
I want to install SQLExp2K5 with Advanced Services on a standalone basis on my Dell Inspiron XPS laptop (Win XP sp2, .NET 2.0; 2gb RAM; 8mb broadband; hardware firewall/router) so that I can learn SQL/VB/VWD, and want to use SQL E 2K5 without internet connectivity (at least until I know what the hell I'm doing!)
Really confused as to what component(s), and services I should/should not install - so I've listed my questions below:
1. Service Account: As I'm not on / dont have a domain, i presume using a domain user account is not an option for me. Should I use the Local Service account ? If so, what are/can be the issues in doing so?
2. Authentication Mode: Is Windows Authentication the one to use for a standalone install?; how would I enable the "sa" account and set an "sa" password? In fact, do I even need an"sa" account / password for a standalone, non internet connected install?
3. Components at install: Is it OK to install all components first off?
4. IIS: Is it possible to install IIS and not allow it access to the internet (or is this a stupid question -bearing in mind I dont really know what IIS is/does)
5: Business Intelligence Development Suite: How do I add BIDS once (IF) I manage to install SQLExp2K5-Adv.Ser,?
6. SQLExp2K5 Books on-line: Am I right in thinking that I should install this after installing SQLExp2K5?
7: Visual Basic Express/Visual Web Developer Express: Do these need to be configured seperately to work with SQLExp2K5?
Sorry about the length of this post, but have tried to be as clear as possible. Also apologise in advance for silly/stupid questions :)
All help and advice greatly appreciated.
Thanks,
sqlexpressbeginner
Hullo all
I have two machines,
One is a standalone machine and the other is on a domain network. How can I run a stored procedure/job on the standalone machine from the domain machine ?
running the procedure as a Domain user results in a failed job/stored proc.
also creating an sql login and attempting to run it as that user also fails. How can I solve this problem ?
please e-mail me at wayde@sunnygrp.com if you have any thoughts...
I just want to run a webiste off my home computer with a dynamic address.It seems I can do all I want with the SQL that comes with vs2005 except being able to backup the DBIs the SQL 2005 that comes with vs2005 good enoh for everything I should want to do?? Is there some chart somewhere that explains the differences ?
View 4 Replies View RelatedI need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
For a database, we have 4 data files in a particular file group and the file sizes are almost 70 GB each.
Do I come across any performance issues if I create/pre-allocate an additional data file in the same file group so that the existing files don't grow too much?
In a server we had File Growth,And then We had to Add New Hard Drive And New File On It.And Now We have New server with a Huge Hard Drive.But all files remaind.Can I Reduce This files to One data file or not ?
View 3 Replies View RelatedHi all,
I have a database name MyDatabase (SQL Server Express Dabase File). Is there anyway that I could convert it to SQL Server Compact Edition File?
By the way does anyone here got any problem with programming in SQL Server Compact Edition? It troubles me.
Thanks,
bombie
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
Historically I've always written a VB script to copy a file from a sharepoint library. I don't like this method because I have to input a username & password in the script and maintain a config file.
Yesterday I was playing around with using a file system task. The sharepoint file has a UNC path so why not? I created a simple test package with a single file system task that copies the sharepoint file (addressed via UNC) to another network location. Package runs fine locally.
I try running on our utility server but am getting a "The file name [SHAREPOINT UNC PATH] specified in the connection was not valid" error. Package is running with a proxy on the server and the proxy account has the same permissions to the sharepoint site (so far as I can tell) as me.
one of my database data file is 100 GB and the log file is 500 GB.DB is in full recovery model and the transaction logs happen once in 6 hours.Even then, the Database log file isn't reducing in size.
View 9 Replies View RelatedDear all,
I am deploying programatically an Excel 2007 file to a SQL Server 2005 Reporting Server. The problem is that if a file with the same name already exists, that file isn't replaced. I would like the opposite to happen. I'm using the following code:
--Executable
set svr=http://w3sdwsqld1/reportserver
set src_fld="\w3sdwsqld1\deploy\SAD\ECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\"
set dest_fld="Associados"
set script="\w3sdwsqld1\deploy\SADECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\PublishReports.rss"
REM Sample: deploy.bat http://w3sdwsqld1/reportserver "\w3sdwsqld1\deploy\SAD\ECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\" "Associados" "\w3sdwsqld1\deploy\SADECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\PublishReports.rss"
for /R %src_fld% %%f in (*.xlsx) do rs -i %script% -s %svr% -v ParentFolder=%dest_fld% -v reportP="%%~nf" -v path=%src_fld%
PAUSE
--rss Code
'
' Script Variables
'
' Variables that are passed on the command line with the -v switch:
'
' (a) parentFolder - corresponds to the folder that the script creates and uses
' to contain your published reports
' (b) reportP - corresponds to the report to publish
Dim ROOT As String = "/SAD/Ecrans/Ecrans/AM"
Dim definition As [Byte]() = Nothing
Dim warnings As Warning() = Nothing
Dim parentPath As String = ROOT + "/"+ parentFolder
Dim filePath As String = path
Dim report As String = reportP
Public Sub Main()
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
'Create the parent folder
Try
rs.CreateFolder(parentFolder, ROOT,Nothing)
Console.WriteLine("Parent folder {0} created successfully", parentFolder)
Catch e As Exception
Console.WriteLine(e.Message)
End Try
'Create shared data source
'CreateSampleDataSource("Solucao_Integrada", "OLEDB-MD", "Data Source=dwareas1;Initial Catalog=SAD_Solucao_Integrada")
'Publish the sample reports
PublishReport(report)
End Sub
Public Sub CreateSampleDataSource(name As String, extension As String, connectionString As String)
'Define the data source definition.
Dim definition As New DataSourceDefinition()
definition.CredentialRetrieval = CredentialRetrievalEnum.Integrated
definition.ConnectString = connectionString
definition.Enabled = True
definition.EnabledSpecified = True
definition.Extension = extension
definition.ImpersonateUser = False
definition.ImpersonateUserSpecified = True
'Use the default prompt string.
definition.Prompt = Nothing
definition.WindowsCredentials = False
Try
rs.CreateDataSource(name, parentPath, False, definition, Nothing)
Console.WriteLine("Data source {0} created successfully", name)
Catch e As Exception
Console.WriteLine(e.Message)
End Try
End Sub
Public Sub PublishReport(ByVal reportName As String)
Try
Dim stream As FileStream = File.OpenRead(filePath + reportName + ".xlsx")
Console.WriteLine(reportName)
definition = New [Byte](stream.Length) {}
stream.Read(definition, 0, CInt(stream.Length))
stream.Close()
Catch e As IOException
Console.WriteLine(e.Message)
End Try
Try
rs.CreateResource(reportName + ".xlsx", parentPath, True, definition, "application/x-excel", Nothing)
Catch e As Exception
Console.WriteLine(e.Message)
Console.WriteLine("Failed to publish report")
End Try
End Sub
--------------------------------------------------------------------------------------------------------------------
Any thoughts? Many thanks,
Pedro Martins
Portugal
I have the following SQL
IFOBJECT_ID('tempdb..#TempTable_Lockbox_File_Header_Record')IS NOTNULLDROP TABLE#TempTable_Lockbox_File_Header_Record
;
IFOBJECT_ID('tempdb..#TempTable_Lockbox_Batch_Header_Record')IS NOTNULLDROP TABLE#TempTable_Lockbox_Batch_Header_Record
;
[code]....
When I send my query results to a file in SQL Server Management Studio, how come I'm seeing the following in Notepad++? FH TEST "FH" which I thought should be in a CHAR(2) data column is there but "TEST" seems to start in Column 6...not column 3 as I would have expected. I was expecting... FHTEST.
Hi all,
I have the "Northwind" database in my Sql Server Management Studio Express.
In my C:ProSSEAppsSamplesForChapter02Chapter02 folder, I have the following 2 files:
(1) ListColumnValues (MS-DOS Batch File)
sqlcmd -S .sqlexpress -v DBName = "Northwind" CName = "CompanyName" TName =
"Shippers" -i c:prosseappschapter02ListListColumnVales.sql -o
c:prosseappschapter02ColumnValuesOut.rpt
(2) ListColumnValues (Microsoft SQL Server Query File)
USE $(Northwind)
GO
SELECT $(CompanyName) FROM $(Shippers)
GO
When I ran the following SQLcmd:
C:ProSSEAppsSamplesForChapter02Chapter02>ListColumnValues.bat
I got the following "ColumnValuesOut.rpt" with error messages:
'Northwind' scripting variable not defined.
Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1
Incorrect syntax near '$'.
'CompanyName' scripting variable not defined.
'Shippers' scripting variable not defined.
Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1
Incorrect syntax near 'CompanyName'.
I copied these T-SQL statements from a book and I do not know how to correct them.
Please help and tell me how to correct these errors.
Thanks in advance,
Scott Chang
Hi All,
I need to read a csv file, which is in remote server using SQl Bulk Insert Command.
Can I read a file Which is in remote server using BULK INSERT.
Thank you.......
hello,
I'm not really sure my question belongs to here...
I have a database in Access (from microsoft office, of course), and I want to transfer convert it to SQL Server.
Does anyone know how I can do it? It must be very simple, but I haven't found it yet....
Thanks a lot!
- Miri
how can i convert a file from kind btrieve to a sql server 2000 file and usedthat files in sql server 2000thank you from your answer
View 1 Replies View RelatedI need to write a code in asp.net to convert .bak file in sql server to .csv file...
View 6 Replies View Related