Sql Server : Sys.sp_OACreate Error

May 21, 2008

I tried to  send the html format email alert  through sql server. Its working fine in sql server 2000 (Dev Server). then i

moved to production server (sql server 2005).

when i run this email program (USP_SendHolidayAlert) in sql server 2005, i got the folloing errors,

Msg 15281, Level 16, State 1, Procedure sp_OACreate, Line 1
SQL Server blocked access to procedure 'sys.sp_OACreate' of component 'Ole Automation Procedures' because this component is

turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole

Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface

Area Configuration" in SQL Server Books Online.

Msg 15281, Level 16, State 1, Procedure sp_OASetProperty, Line 1
SQL Server blocked access to procedure 'sys.sp_OASetProperty' of component 'Ole Automation Procedures' because this component

is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole

Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface

Area Configuration" in SQL Server Books Online.

Msg 15281, Level 16, State 1, Procedure sp_OASetProperty, Line 1
SQL Server blocked access to procedure 'sys.sp_OASetProperty' of component 'Ole Automation Procedures' because this component

is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole

Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface

Area Configuration" in SQL Server Books Online.

Msg 15281, Level 16, State 1, Procedure sp_OAMethod, Line 1
SQL Server blocked access to procedure 'sys.sp_OAMethod' of component 'Ole Automation Procedures' because this component is

turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole

Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface

Area Configuration" in SQL Server Books Online.

Msg 15281, Level 16, State 1, Procedure sp_OADestroy, Line 1
SQL Server blocked access to procedure 'sys.sp_OADestroy' of component 'Ole Automation Procedures' because this component is

turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole

Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface

Area Configuration" in SQL Server Books Online.


Stored Procedure
----------------

CREATE Procedure USP_SendHolidayAlert       
  
/*                       
Name:  USP_SendHolidayAlert                    
Description:  Send Email holiday Alert 
Author:  Gopalan Mani                   
Modification Log: Create                   
                       
Description                  Date         Changed By                       
Created procedure            13-05-2008    Gopalan Mani                   
*/         
      
@SenderName varchar(250),     
@SenderAddress  varchar(250),     
@RecipientName  varchar(250),     
@RecipientAddress  varchar(250),     
@Subject   varchar(250) ,    
@Title  varchar(350)  ,   
@HolidayDate   varchar(350)  
     
as       
         
DECLARE @HtmlContent varchar(8000)       
       
DECLARE @object int       
DECLARE @executable int       
     
DECLARE @RecCount int       
       
       
EXEC @executable = sp_OACreate 'CDONTS.NewMail', @object OUT       
EXEC @executable = sp_OASetProperty @object, 'BodyFormat', 0       
EXEC @executable = sp_OASetProperty @object, 'MailFormat', 0       
 
          
 
select @HtmlContent =MailText from Tbl_EmailContent where RecID=2 
 
  
 
select @HtmlContent= REPLACE(@HtmlContent,'Holiday_Title',@Title) 
select @HtmlContent= REPLACE(@HtmlContent,'Holiday_Date',@HolidayDate) 
 
 
EXEC sp_OAMethod @object, 'Send', NULL,@SenderAddress ,@RecipientAddress,@Subject,@HtmlContent       
EXEC sp_OADestroy @object   
    


please do some necessery steps to solve this problems.

 

View 2 Replies


ADVERTISEMENT

Sp_OACreate In SQL Server 2005, Fails With 'Not Enough Storage Is Available To Complete This Operation'

Jan 20, 2007

Hi all,

I have created a small COM in C# so that I can programatically create and execute stored procedures with SMO. At this point the COM has nothing in it but just a test prototype.
But when I tried to create the object as follows, I get the error indicated below.
It is not a memory issue because I have adequate storage and RAM.

Please Help!

DECLARE @object int
DECLARE @hr int
DECLARE @property varchar(255)
DECLARE @return varchar(255)
DECLARE @src varchar(255), @desc varchar(255)

-- Create an object.
EXEC @hr = sp_OACreate 'SQLInterop.CsharpHelper', @object OUT
IF @hr <> 0
BEGIN
EXEC sp_OAGetErrorInfo @object, @src OUT, @desc OUT
SELECT hr=convert(varbinary(4),@hr), Source=@src, Description=@desc
RETURN
END

This is the error I am getting:

Error Code: 0x8007000E
Description: Not enough storage is available to complete this operation.
Source: ODSOLE Extended Procedure


This is the C# code for the COM:

using System;
using System.Runtime.InteropServices;
using System.Reflection;
using System.Runtime.CompilerServices;
using System.EnterpriseServices;

// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
[assembly: AssemblyTitle("CSServer")]
[assembly: AssemblyDescription("Test SQL .NET interop")]
[assembly: AssemblyDelaySign(false)]
[assembly: AssemblyKeyFile("MyKey.snk")]

// Setting ComVisible to false makes the types in this assembly not visible
// to COM components. If you need to access a type in this assembly from
// COM, set the ComVisible attribute to true on that type.
[assembly: ComVisible(true)]

// The following GUID is for the ID of the typelib if this project is exposed to COM
[assembly: Guid("ff35c6b4-81bf-47dd-9290-fcbbb49008d9")]

// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Revision and Build Numbers
// by using the '*' as shown below:
[assembly: AssemblyVersion("1.0.0.1")]
[assembly: AssemblyFileVersion("1.0.0.1")]

// the ApplicationName attribute specifies the name of the
// COM+ Application which will hold assembly components
[assembly: ApplicationName("SQLInterop")]

// the ApplicationActivation.ActivationOption attribute specifies
// where assembly components are loaded on activation
// Library : components run in the creator's process
// Server : components run in a system process, dllhost.exe
[assembly: ApplicationActivation(ActivationOption.Server)]
namespace SQLInterop
{
public interface ITest
{
string SayHello();
string SayIt(String strMessage);
}

//[SecurityRole("RBSecurityDemoRole", SetEveryoneAccess = true)]
[ComVisible(true)]
[CLSCompliant(false)]
[ClassInterface(ClassInterfaceType.None)]
public class CSharpHelper : ITest
{
public string SayHello()
{
return "Hello from CSharp";
}

public string SayIt(String strMessage)
{
return strMessage + ": from CSharp";
}
}
}

View 8 Replies View Related

SP_oacreate

Mar 31, 2008

pls send me some code samples to import a html/txt file using the sp_oacreate procedure
am getting the error number -2147221005


please let me know

View 5 Replies View Related

Sp_OACreate With Excel

Jan 3, 2002

I'm having problems creating and saving an Excel object.

I can create a Word document, but not an Excel file

It fails and Excel is in the task manager but nothing else happens.

I have to kill the processes, from my Exe/Dll viewer "ProcExp"
(It's a cool app, that saves me from rebooting to free up my system)

Anyway, here is both my VBS and TSQL code.

TIA

JeffP...

/*
'vbs code......saved in Notepad
Dim myexcel
set myexcel = createobject("Excel.Application")
myExcel.Application.UserName = "JeffP"
myExcel.Application.Workbooks.Add
myExcel.Application.ActiveWorkbook.SaveAs ("Me.xls")
myExcel.Application.ActiveWorkbook.Save
myExcel.Workbooks.Close
myExcel.Application.Quit
'end vbs code
*/
--begin tsql
declare @Obj int ,@file varchar(100) ,@user varchar(100) ,@res int
,@sheet int ,@saveas varchar(255) ,@save varchar(255)

set @user = 'Jackx'
set @file = 'me.xls'

set @saveas = 'ActiveWorkbook.SaveAs("C:Documents and SettingsjeffMy Documents")'
set @save = 'ActiveWorkbook.Save'

exec @res = sp_oacreate 'excel.application' ,@obj output
print 'Obj'
print @res
print @obj
print '-------'

exec @res = sp_oamethod @obj ,'workbooks.add' ,@sheet output
print 'add'
print @res
print @sheet
print '-------'

exec @res = sp_oamethod @obj ,@saveas
print 'saveas'
print @res
print @file
print '-------'

exec @res = sp_oamethod @obj ,'ActiveWorkbook.Save'
print 'save'
print @res
print @file
print '-------'

exec @res = sp_oamethod @obj ,'Workbooks.Close'
print 'close'
print @res
print @file
print '-------'

exec @res = sp_oamethod @obj ,'quit'
print 'quit'
print @res
print @sheet
print '-------'

exec @res = sp_oadestroy @obj
print 'end'
print @res
--end tsql

View 1 Replies View Related

Sp_OACreate And Sp_OAMethed Heelllllpppp...

Mar 23, 2008

I have a question and I hoping to not sound to lame. I am trying to use the sp_oacreate and the sp_oamethed to run my dll from sql sever 2005
It looks some thing like this

EXEC @hr = sp_OACreate 'MyApplication.Adcom', @object OUT,5
IF @hr <> 0
BEGIN --Not able to create the object
Return @hr
END --Not able to create the object

EXEC @hr = sp_OAMethod @object, 'Authenticate', @FunctionReturn OUT, strUser, strPassword, strDoman
IF @hr <> 0
BEGIN --Not able to execute Com function
Return @hr
END --Not able to execute Com function

I have created my dll in .net and placed it in the root drive of the server. How does OACreate know where to locate my dll?
One executing this fucntion I am returning -2147221005
-214721148 error code.

Have I created my dll incorrectly? The name of the dll is ActiveDirectoryCom and the Class with in the dll is called Adcom and the function that need to run is called AuthenticateUserFullPath. Have I correctly Written the sp_Oa's

View 3 Replies View Related

Sp_OACreate And Sp_OAMethed Heelllllpppp...

Mar 23, 2008

I have a question and I hoping to not sound to lame. I am trying to use the sp_oacreate and the sp_oamethed to run my dll from sql sever 2005
It looks some thing like this

EXEC @hr = sp_OACreate 'MyApplication.Adcom', @object OUT,5
IF @hr <> 0
BEGIN --Not able to create the object
Return @hr
END --Not able to create the object

EXEC @hr = sp_OAMethod @object, 'Authenticate', @FunctionReturn OUT, strUser, strPassword, strDoman
IF @hr <> 0
BEGIN --Not able to execute Com function
Return @hr
END --Not able to execute Com function

I have created my dll in .net and placed it in the root drive of the server. How does OACreate know where to locate my dll?
One executing this fucntion I am returning -2147221005
-214721148 error code.

Have I created my dll incorrectly? The name of the dll is ActiveDirectoryCom and the Class with in the dll is called Adcom and the function that need to run is called AuthenticateUserFullPath. Have I correctly Written the sp_Oa's

View 4 Replies View Related

Need To Call Com Object Using Sp_OACreate

Apr 11, 2008

Hi,
I have com object on another machine, and I want to call from diffetent machine,Is It possible to use sp_oACreate to creating object of com object that resides on another computer.

Thanks


View 1 Replies View Related

.Net COM Interop Class Not Working Via Sp_OACreate

Aug 2, 2006

this thread is actually to help another guy out in a seperate thread lol...I am not a COM expert but I do have a basic understanding of it from a dev perspective. I am trying to get COM interop via VS2005 to work from a sql2005 sp_OACreate call. below is the code. I can replace my custom object with say a sqldmo reference and IT WORKS! So I was thinking maybe security issues, but even when I run sql under an admin account it does not work. and i am connecting via sa for the code.

 

Also, I have tested the COM object via windows script host/.vbs file: dim oOjbect set oObject = CreateObject(myCOMObject.Math) msgbox oObject.Add(1,1). And the object appears to be listed correctly in the registry under HKEY_Classes

Imports System

Imports System.IO

Imports System.Data

Imports System.Data.SqlClient

Imports System.Data.SqlTypes

Imports Microsoft.SqlServer.Server

Imports Microsoft.VisualBasic

Imports System.Diagnostics

 

Public Class Math

Public Function Add(ByVal iFirstNum As Integer, ByVal iSecondNum As Integer)

Return (iFirstNum + iSecondNum)

End Function

End Class

------------------------------------------------------------------------------------------

DECLARE @object int

DECLARE @hr int

DECLARE @src varchar(255), @desc varchar(255)

EXEC @hr = sp_OACreate 'myCOMObject.Math', @object OUT,5

IF @hr <> 0

BEGIN

EXEC sp_OAGetErrorInfo @object, @src OUT, @desc OUT

SELECT hr=convert(varbinary(4),@hr), Source=@src, Description=@desc

RETURN

END

View 6 Replies View Related

Sp_OAcreate, Access.Application Can Not OpenCurrentDatabase

Jan 19, 2007

Hi all,

trying to use MS Access Automation from within SQL Server 2000 .

Seems that OpenCurrentDatabase (Access Application property) just hangs...

Following, the code that is used:

--BOF--

--object vars
DECLARE @w_object INT,
@s_object INT

--error handling vars
DECLARE @error INT
DECLARE @src VARCHAR(255),
@desc VARCHAR(255)

--execution vars
DECLARE @command NVARCHAR(100),
@property NVARCHAR(20)

--create an Access application
EXEC @error = sp_OACreate 'Access.Application', @w_object OUT
IF @error <> 0
BEGIN
EXEC sp_OAGetErrorInfo @w_object, @src OUT, @desc OUT
SELECT CONVERT(VARBINARY(4),@error) AS Error, @src AS Source, @desc AS [Description]
RETURN
END

--get default security level
EXEC sp_OAGetProperty @w_object, 'AutomationSecurity', @property OUT
SELECT @property AS default_security_level

--set application security level to low (no sandbox)
--thought this would help, but no luck
EXEC @error = sp_OASetProperty @w_object, 'AutomationSecurity', '1' --Low Security
IF @error <> 0
BEGIN
EXEC sp_OAGetErrorInfo @w_object
GOTO Cleanup
END

--Test security level
EXEC sp_OAGetProperty @w_object, 'AutomationSecurity', @property OUT
SELECT @property AS my_security_level

--check current user
EXEC sp_OAGetProperty @w_object, 'CurrentUser', @property OUT --should be Admin
SELECT @property AS current_application_user --it is Admin

--Open non password protected database,
SET @command = 'OpenCurrentDatabase("C:mikros.mdb")'

--unfortunately this hangs...
EXEC @error = sp_OAMethod @w_object, @command
IF @error <> 0
BEGIN
EXEC sp_OAGetErrorInfo @w_object, @src OUT, @desc OUT
SELECT 'Failed to Open database', CONVERT(VARBINARY(4),@error) AS Error, @src AS Source, @desc AS [Description]
GOTO Cleanup
END

--Close current database
EXEC @error = sp_OAMethod @w_object, 'CloseCurrentDatabase'
IF @error <> 0
BEGIN
EXEC sp_OAGetErrorInfo @w_object, @src OUT, @desc OUT
SELECT 'Failed to Close database', CONVERT(VARBINARY(4),@error) AS Error, @src AS Source, @desc AS [Description]
END

Cleanup:
--close Application
EXEC @error = sp_OAMethod @w_object, 'Quit'
IF @error <> 0
BEGIN
EXEC sp_OAGetErrorInfo @w_object
END

--destroy Application Object
EXEC @error = sp_OADestroy @w_object
IF @error <> 0
BEGIN
EXEC sp_OAGetErrorInfo @w_object
END

--EOF--



Any help would be appreciated.

Thanks in advance

View 1 Replies View Related

EXECUTE Permission Denied On Object 'sp_OACreate', Database 'mssqlsystemresource'

Oct 5, 2006

HI There

I have a user login that is executing an sp. It gets the follwoing error:
Msg 229, Level 14, State 5, Procedure sp_OACreate, Line 1
EXECUTE permission denied on object 'sp_OACreate', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sp_OAMethod, Line 1
EXECUTE permission denied on object 'sp_OAMethod', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sp_OAMethod, Line 1
EXECUTE permission denied on object 'sp_OAMethod', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sp_OAMethod, Line 1
EXECUTE permission denied on object 'sp_OAMethod', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sp_OAGetProperty, Line 1
EXECUTE permission denied on object 'sp_OAGetProperty', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sp_OAGetProperty, Line 1
EXECUTE permission denied on object 'sp_OAGetProperty', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sp_OADestroy, Line 1
EXECUTE permission denied on object 'sp_OADestroy', database 'mssqlsystemresource', schema 'sys'.

Everything ic an find on the net refers to Sql Server 2000 but this is 2005, all the resolutions say you must grant exec permissions to the user account for these sp's in the master database.

BUT is SS2005 they are in the mysqlsystemresource database.

WHen i try the following

grant exec on mssqlsystemresource.sys.sp_OACreate to UserLogin:

I get this error:

Cannot find the object sp_OACreate, becuase the object does not exist or you do not have permission.

I am logged in as sysadmin so i doubt it is permission.

How do i get a user login to be able to exec these sp's?

Thanx

View 11 Replies View Related

EXECUTE Permission Denied On Object 'sp_OACreate', Database 'master', Owner 'dbo'.

Sep 21, 2005

I want to send email using sql stored procedure.my code is work fine in my local sqlserver account. when I use my online sql server it display this error.
EXECUTE permission denied on object 'sp_OACreate', database 'master', owner 'dbo'.
EXECUTE permission denied on object 'sp_OASetProperty', database 'master', owner 'dbo'.
EXECUTE permission denied on object 'sp_OAMethod', database 'master', owner 'dbo'.
EXECUTE permission denied on object 'sp_OADestroy', database 'master', owner 'dbo'.
How canI solove this problem?

View 1 Replies View Related

EXECUTE Permission Denied On Object Sp_OACreate/method/GetProperty/Destroy

Aug 3, 2002

Hi friends

I copy script that use SQL proc to call DTS package from this site.

When I run this procedure in SQL query alalyzer. I got an error messages:
EXECUTE permission denied on object sp_OACreate/method/GetProperty/Destroy.
I did not change anything in spExecutePKG.
Even I used sa as ServerPWD. How to fix this problem? my code is
exec spExecutePKG 'myserver','execl_DTS','sa','0',''
Thanks
jimmy

------proc original code
CREATE PROC spExecutePKG
@Server varchar(255),
@PkgName varchar(255), -- Package Name (Defaults to most recent version)
@ServerPWD varchar(255) = Null,-- Server Password if using SQL Security to load Package (UID is SUSER_NAME())
@IntSecurity bit = 0,-- 0 = SQL Server Security, 1 = Integrated Security
@PkgPWD varchar(255) = ''-- Package Password
AS
SET NOCOUNT ON
/*
Return Values
- 0 Successfull execution of Package
- 1 OLE Error
- 9 Failure of Package
*/
DECLARE @hr int, @ret int, @oPKG int, @Cmd varchar(1000)

-- Create a Pkg Object
EXEC @hr = sp_OACreate 'DTS.Package', @oPKG OUTPUT
IF @hr <> 0
BEGIN
PRINT '*** Create Package object failed'
EXEC sp_displayoaerrorinfo @oPKG, @hr
RETURN 1
END

-- Evaluate Security and Build LoadFromSQLServer Statement
IF @IntSecurity = 0
SET @Cmd = 'LoadFromSQLServer("' + @Server +'", "' + SUSER_SNAME() + '", "' + @ServerPWD + '", 0, "' + @PkgPWD + '", , , "' + @PkgName + '")'
ELSE
SET @Cmd = 'LoadFromSQLServer("' + @Server +'", "", "", 256, "' + @PkgPWD + '", , , "' + @PkgName + '")'

EXEC @hr = sp_OAMethod @oPKG, @Cmd, NULL

IF @hr <> 0
BEGIN
PRINT '*** LoadFromSQLServer failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END

-- Execute Pkg
EXEC @hr = sp_OAMethod @oPKG, 'Execute'
IF @hr <> 0
BEGIN
PRINT '*** Execute failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END

-- Check Pkg Errors
EXEC @ret=spDisplayPkgErrors @oPKG

-- Unitialize the Pkg
EXEC @hr = sp_OAMethod @oPKG, 'UnInitialize'
IF @hr <> 0
BEGIN
PRINT '*** UnInitialize failed'
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END

-- Clean Up
EXEC @hr = sp_OADestroy @oPKG
IF @hr <> 0
BEGIN
EXEC sp_displayoaerrorinfo @oPKG , @hr
RETURN 1
END

RETURN @ret
GO

View 1 Replies View Related

EXECUTE Permission Denied On Object 'sp_OACreate', Database 'master', Owner 'dbo'.

Sep 21, 2005

I want to send email using sql stored procedure.my code is work fine in my local sqlserver account. when I use my online sql server it display this error.

EXECUTE permission denied on object 'sp_OACreate', database 'master', owner 'dbo'.

EXECUTE permission denied on object 'sp_OASetProperty', database 'master', owner 'dbo'.

EXECUTE permission denied on object 'sp_OAMethod', database 'master', owner 'dbo'.

EXECUTE permission denied on object 'sp_OADestroy', database 'master', owner 'dbo'.

How canI solove this problem?

View 2 Replies View Related

Sp_OACreate 'SQLXMLBulkLoad.SQLXMLBulkload' In 2005

Jan 31, 2006

With my Sql server I install SQLxml3.0 and run this with problem.
DECLARE @ObjectError INT
, @Object INT
, @ErrMsg VARCHAR(50)

EXEC @ObjectError = sp_OACreate 'SQLXMLBulkLoad.SQLXMLBulkload', @Object OUT,4I plan to go with the Sql server 2005 but this code give me a error...:eek: Msg 15281, Level 16, State 1, Procedure sp_OACreate, Line 1

SQL Server blocked access to procedure 'sys.sp_OACreate' of component 'Ole Automation Procedures' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface Area Configuration" in SQL Server Books Online.
My user right not change. And I dont see some "SQLXML" in the "Surface Area Configuration"???

Can someone can give my suggestion?

View 1 Replies View Related

Error :(provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server) (Microsoft SQL Server, Error: 53)

Mar 1, 2007

Hi,

I am trying to connect to my SQL Server 2005 but it gave me following error message.




TITLE: Connect to Server
------------------------------

------------------------------
ADDITIONAL INFORMATION:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)



So, Please help me to solve this problem.



tnks.

View 20 Replies View Related

SQL Server 2005 Install Error (Error 29528. Unexpected Error While Installing Performance Counters. )

Jun 12, 2007

I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.

This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.

Extract from log:

<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.

You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).

I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.

Any ideas?

View 3 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details. RsInternal Error)

May 20, 2008

We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"

Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.

Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.

We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?

Please help.

View 1 Replies View Related

I Have The Dreaded Internal Error Occured On The Report Server. See Error Log For More Details No Error Log

Apr 9, 2008

I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.

Thanks!
Terry

View 4 Replies View Related

Link Server Error: Login Failed For User 'Domainuser'. (Microsoft SQL Server, Error: 18456)

Oct 18, 2007


Hi,

I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:

The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)


I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.

Can anyone shed some light as to what may be the problem?


Thanks,

View 5 Replies View Related

Just Started Getting This Error When Trying To Connect To SQL From ASP.NET--error: 26 - Error Locating Server/Instance Specified

Apr 3, 2007

This has worked fine for weeks, and months.

I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.

Today, actually half way through today, I restarted my computer after installing Photoshop Updates.

Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).

Whenever I run an web app that connects to it I get this error:


An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?

--Edit

I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.

View 1 Replies View Related

Unable To Connect To SQL Server 2005 (error: 26 - Error Locating Server/Instance Specified)

Jun 5, 2007

I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.

The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.

The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"

I dont understand as to why i am unable to connect to 2005.

Any ideas?

View 4 Replies View Related

SQl Server Error: ----&> Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server

Apr 23, 2008

 
Hi Friends,
Im using .Net2008 and MS SQL Server2005, I Have a web application , i want to connect to the server machine SQL Server,  When i run the application im getting the following error.
Im trying to connect to the database from local machine application to server machine database
  An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My WebConfig File is<connectionStrings>
<add name="NewConnectionString" connectionString="Data Source=sqlserverservername.com;Initial Catalog=Test;UID=User;PASSWORD=Pwd;Integrated Security=True;connect timeout=30" providerName="System.Data.SqlClient"/></connectionStrings>
 
<appSettings>
<add key="connectionstring" value="Data Source=Sys67;Initial catalog=DB;user id=sa;password=sa;connect timeout=30"/>
</appSettings>
Please Help me to sortout this ISSUe, Its very urgent please 
 
 

View 7 Replies View Related

Form Authentication: The Remote Server Returned An Error: (500) Internal Server Error.

Mar 11, 2008

I got Form Authentication to work, but I am getting this error sometimes. To reproduce this error consistantly is to run iisreset.exe to have a fresh start. Go to my report server login and open any report.

The page will display: The remote server returned an error: (500) Internal Server Error.

If i click "F5" to refresh the page the report will show up or if you go to another report it will work also. It is just the first time after iisreset.exe. It is very strange.

Here is my log file:

aspnet_wp!library!6!03/11/2008-15:20:36:: i INFO: Exception dumped to: c:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
aspnet_wp!library!6!03/11/2008-15:20:47:: Call to GetPermissionsAction(/).
aspnet_wp!library!1!03/11/2008-15:20:47:: Call to GetPropertiesAction(/, PathBased).
aspnet_wp!library!6!03/11/2008-15:20:48:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:48:: Call to ListChildrenAction(/, False).
aspnet_wp!library!6!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:20:53:: Call to GetPermissionsAction(/Sentrack).
aspnet_wp!library!1!03/11/2008-15:20:53:: Call to GetPropertiesAction(/Sentrack, PathBased).
aspnet_wp!library!a!03/11/2008-15:20:54:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:54:: Call to ListChildrenAction(/Sentrack, False).
aspnet_wp!library!a!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction().
aspnet_wp!library!6!03/11/2008-15:20:58:: Call to GetPermissionsAction(/Sentrack/Shared Reports).
aspnet_wp!library!1!03/11/2008-15:20:59:: Call to GetPropertiesAction(/Sentrack/Shared Reports, PathBased).
aspnet_wp!library!6!03/11/2008-15:20:59:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:59:: Call to ListChildrenAction(/Sentrack/Shared Reports, False).
aspnet_wp!library!6!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:21:04:: Call to GetPermissionsAction(/Sentrack/Shared Reports/Report).
aspnet_wp!library!1!03/11/2008-15:21:04:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:21:05:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased).
aspnet_wp!library!1!03/11/2008-15:21:05:: Call to GetSystemPermissionsAction().
aspnet_wp!library!a!03/11/2008-15:21:06:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased).
aspnet_wp!library!1!03/11/2008-15:21:06:: Call to ListEventsAction().
aspnet_wp!library!1!03/11/2008-15:21:07:: Unhandled exception was caught: System.Web.HttpException: File does not exist.
at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context)
at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
aspnet_wp!library!1!03/11/2008-15:21:07:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Web.HttpException: File does not exist.
at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context)
at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
--- End of inner exception stack trace ---

Any ideas?

View 3 Replies View Related

Help. When Using Profile GetPropertyValue, I Get The Following Connection Error: An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Sett

May 3, 2008

 Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on  my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100:    public virtual string Address2 {Line 101:        get {Line 102:            return ((string)(this.GetPropertyValue("Address2")));Line 103:        }Line 104:        set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot021d50639a6858cApp_Code.54nvluyo.1.cs    Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]   System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435   System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82   System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105   System.Data.SqlClient.SqlConnection.Open() +111   System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84   System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197   System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782   System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428   System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404   System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117   System.Configuration.SettingsBase.get_Item(String propertyName) +89   System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36   System.Web.Profile.ProfileBase.get_Item(String propertyName) +68   System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4   ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot021d50639a6858cApp_Code.54nvluyo.1.cs:102   ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242   ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.]   System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0   System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72   System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308   System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29   System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480   System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960   System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17   System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149   System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70   System.Web.UI.WebControls.FormView.DataBind() +4   System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82   System.Web.UI.WebControls.FormView.EnsureDataBound() +163   System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69   System.Web.UI.Control.EnsureChildControls() +87   System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21   System.Web.UI.Control.FindControl(String id) +9   CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60   System.Web.UI.Control.PreRenderRecursiveInternal() +86   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041 

View 1 Replies View Related

Connecting To Sql Server 2000 On Godaddy Error: (provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server)

Mar 5, 2007

Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;"  & _                    "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message  An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions?  Thanks in advance,bswanson     

View 1 Replies View Related

Urgent : DB-Library Error 10007: General SQL Server Error: Check Messages From The SQL

Jul 20, 2005

DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh

View 1 Replies View Related

Error: 26 - Error Locating Server/Instance Specified - (My Hosting Company Says It's In My Connection String) NOT!

May 24, 2007

Hi All...



I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be

the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall

connectivity problems. Please help!!!



===================================================================================


An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Source Error:





An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:





[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102





Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210





Now you all must admit that, if your somewhat new to this databasing, It's a ***.



The source for my application is Visual Web Designer 2005 Express

It is an ASP.Net driven site with membership roles and all the good stuff.

the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider

to something else. Most of my complications and frustrations come from GoDaddy and no access to the

shared server (understandibly).



I hope I gave enough info for help and not too much..



Dave



View 4 Replies View Related

Sql Server 2005 Dev Edition Error - Unexpected Error While Updating Installed Files

Feb 14, 2007

I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:

Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528

There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?

Thanks, Jennifer

MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity

The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.

Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.

<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.

View 8 Replies View Related

Error: SQL Server Internal Error. Text Manager Cannot Continue With Current Statement..

Sep 21, 2006

When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log:

SQL Server Internal Error. Text manager cannot continue with current statement.

The server is running SQL Server 2000 with SP4.

I am really concerned because this is a production sever and there are over 300 users access concurrently.

Please help me to find a solution.

Thanks,

Roshan.

View 8 Replies View Related

Famous Provider: SQL Network Interfaces, Error: 26 - Error Locating Server/Instance Specified)

Dec 14, 2007

I have 2003 server installed on my machine along with MS SQL Server Management Studio and I am able to connect fine to SQL 2000 Instances. On my laptop running Vista Enterprise, I can not connect to these exact same instances via MS SQL Server Management Studio as I am getting the above error. Does anyone else have this problem? I have no idea what to check for anymore. Thanks in advance.

View 2 Replies View Related

Error Opening Reporting Services Site --- Server Error In '/Reports' Application

May 9, 2008

I recently installed SQL Server 2005 Enterprise on a machine running Server 2003. I have successfully configured Reporting Services (see below for summary of settings)
- Used the defaults for the Repor tServer and Report Manager Virtual Directories
- Windows Service Identity set to domain user. The domain user is part of the administrator group on the machine and has sysadmin rights to the database
- Web Service Identity set to NT AuthorityNetworkService

When I open http://localhost/reports/, I get the following error:

I have check a bunch of forums, but have no success. Any advise would be greatly appreciated!!




Server Error in '/Reports' Application.


Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.

Compiler Error Message: CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '

Source Error:







[No relevant source lines]
Source File: Line: 0



Show Detailed Compiler Output:





c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3a890e9c0068591f_f54cc701ReportingServicesFileShareDeliveryProvider.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Mobile2.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll" /R:"C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll" /R:"C:WINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.IdentityModel3.0.0.0__b77a5c561934e089System.IdentityModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.ServiceModel3.0.0.0__b77a5c561934e089System.ServiceModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl34a099978068591f_f54cc701ReportingServicesEmailDeliveryProvider.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3de5a23320958a20_f54cc701ReportingServicesWebUserInterface.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3498aee86042473c_93d0c501ReportingServicesCDOInterop.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Runtime.Serialization3.0.0.0__b77a5c561934e089System.Runtime.Serialization.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3cd47089b0f2a80e_f54cc701Microsoft.ReportingServices.Interfaces.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3f180608d0083daf_b16dc701Microsoft.ReportingServices.Diagnostics.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl323449648068591f_f54cc701ReportingServicesNativeClient.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699;1701 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.1.cs"


Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1433
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.

error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '








Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433

View 5 Replies View Related

SQL Reporting - An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)

Feb 6, 2006

I have created an RDL file programatically. When I execute the code I get the error as mentioned below:

Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)

When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.

Any Suggestion/feedback is highly appreciated.
Thank You.


The code of the sample RDL is shown below:

<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer

Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function

</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>

View 8 Replies View Related

(provider: SQL Network Interfaces, Error: 26 - Error Locating Server/Instance Specified)

Jun 20, 2006

ASP v2.0I am getting this error when attempting to sign in to my site once uploaded to the server. Can anyone help me to resolve this error?
Server Error in '/' Application.


An error has occurred while establishing a connection to the server.
 When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server.  When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)Source Error:



An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:



[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102

Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.42

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved