SqlDataSource.SelectParameters Method
Apr 27, 2008
Hi,
I am using a grid view with parameter defined in dropdown list. the asp code is:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Pubs %>"
SelectCommand="SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"
DeleteCommand="DELETE FROM [authors] WHERE [au_id] = @au_id">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="state" PropertyName="SelectedValue"
Type="String" /></SelectParameters>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Pubs %>"
SelectCommand="SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"
DeleteCommand="DELETE FROM [authors] WHERE [au_id] = @au_id">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="state" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
</asp:SqlDataSource>
I would like to to set the parameter assignment in my VB code in Page_Load methodWhen i am using:
SqlDataSource1.SelectParameters("state").DefaultValue = DropDownList1.Text
SqlDataSource1.SelectCommand = "SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"I get error message saying: Object reference not set to an instance of an object.
Any ideas how I can set the select parameters (in my VB code) to use the dropdown list I have in my page?
Thanks,
Uzi
View 8 Replies
ADVERTISEMENT
Dec 30, 2005
Hi All,
I'm trying to set the SelectParameters of SqlDataSource from the code behind.
This is my query: SELECT * FROM [UploadSessions] WHERE ([OwnerID] = @OwnerID)And I need to set the value of the @OwnerID at the code behind since it is stored in an object.
How can I do it??
Thanks in advance
Bar
View 7 Replies
View Related
Mar 14, 2008
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:CollegeDatabaseConnectionString %>" SelectCommand="SELECT employee_datails.* FROM employee_datails WHERE memberid !=@id OR memberid OR memberid==uid"> <SelectParameters> <asp:SessionParameter Name="id" SessionField="userid" /> <asp:QueryStringParameter Name="uid" QueryStringField="memberid" /> </SelectParameters> </asp:SqlDataSource> I tried like this but it is not working. It takes at a time one sessionparameter or querystringparameter. I want if profile.aspx--> then i want session parameter in select queryIf profile.aspx?id=12432---> then i want querystringparameter in select query.
View 2 Replies
View Related
Feb 17, 2006
How to pass a null to SelectParameters in SqlDataSource?
The type of "CreateDate" is DateTime, the following code can be run correctly!
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue = "2006-11-12";
now I hope to pass null value to the Parameter "CreateDate", but the following 3 section codes don't work!
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue = string.Empty;
or
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue =null;
or
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue = "";
View 4 Replies
View Related
Sep 12, 2006
Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005
Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory]
@CatId <span class="kwd">int</span> = 0
AS
BEGIN
SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc
End
oDataSource.ConnectionString = constr;
oDataSource.SelectCommand = storedProc;<span class="cmt">//storedproc - sp_GetIdeaByCategory</span>
oDataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
oDataSource.SelectParameters.Add(<span class="st">"@CatId"</span>, catId);
gdvCategories.DataSourceID = oDataSource.ID;
gdvCategories.DataBind(); <<--- Error occured here
View 1 Replies
View Related
Apr 5, 2008
Hi All,
i want to use sqldatasource with controlparameters.there are some textboxes and a dropdownlist on my page.i can easily insert and delete records on database table by using these controls as controlparameters by sqldatasource insert() and delete() method but updating fails.i use try catch block to see the error but no errors found.And also update() method returns 1 that indicates that it worked fine but when i look into the database i see that the record is not updated.i am stucked and surprised.any ideas please?
Thanks
View 5 Replies
View Related
Dec 1, 2005
hiplz can any one tellHow should i use select method of SqlDatasourceplz show little code toothanks
View 1 Replies
View Related
Apr 24, 2007
hello everybody, i have a question to ask, suppose i have a sqldatasource, can i use it in a method??this is my case, i need to make a new method to count the rows in a datagrid, so i will have to read the sqldatasource. the problem is, how to retrieve it?? usually i use the built in sqldatasource_selected to count the rows.... is there any other way??
View 6 Replies
View Related
Oct 25, 2006
Hi, it is few days I posted here my question, but received no answer. Maybe the problem is just my problem, maybe I put my question some strange way. OK, I try to put it again, more simply. I have few textboxes, their values I need to transport to database. I set SqlDataSource, parameters... and used SqlDataSource.Insert() method. I got NULL values in the database's record. So I tried find problem by using Microsoft's sample code from address http://msdn2.microsoft.com/en-us/library/system.web.ui.webcontrols.sqldatasource.insert.aspx. After some changes I tried that code and everything went well, data were put into database. Next step was to separate code beside and structure of page to two separate files followed by new test. Good again, data were delivered to database. Next step: to use MasterPage, very simple, just with one ContentPlaceHolder. After this step the program stoped to deliver data to database and delivers only NULLs to new record. It is exactly the same problem which I have found in my application. The functionless code is here:http://forums.asp.net/thread/1437716.aspx I cannot find any answer this problem on forums worldwide. I cannot believe it is only my problem. I compared html code of two generated pages - with maserPage and without. There are differentions in code in ids' of input fields generated by NET.Framework:Without masterpage:<input name="NazevBox" type="text" id="NazevBox" /><span id="RequiredFieldValidator1" style='color:Red;visibility:hidden;'>Please enter a company name.</span><p><input name="CodeBox" type="text" id="CodeBox" /><span id="RequiredFieldValidator2" style='color:Red;visibility:hidden;'>Please enter a phone number.</span><p><input type="submit" name="Button1" value="Insert New Shipper" onclick="javascript:WebForm_DoPostBackWithOptions(new WebForm_PostBackOptions("Button1", "", true, "", "", false, false))" id="Button1" /> With masterpage:<input name="ctl00$Obsah$NazevBox" type="text" id="ctl00_Obsah_NazevBox" /><span id="ctl00_Obsah_RequiredFieldValidator1" style='color:Red;visibility:hidden;'>Please enter a company name.</span><p><input name="ctl00$Obsah$CodeBox" type="text" id="ctl00_Obsah_CodeBox" /><span id="ctl00_Obsah_RequiredFieldValidator2" style='color:Red;visibility:hidden;'>Please enter a phone number.</span><p><input type="submit" name="ctl00$Obsah$Button1" value="Insert New Shipper" onclick="javascript:WebForm_DoPostBackWithOptions(new WebForm_PostBackOptions("ctl00$Obsah$Button1", "", true, "", "", false, false))" id="ctl00_Obsah_Button1" />In second case ids' of input fields have different names, but I hope it is inner business of NET.Framework.There must be something I haven't noticed, maybe NET's bug, maybe my own. Thanks for any suggestion.
View 2 Replies
View Related
May 10, 2007
Hi,I am trying to write a method which needs to call a stored procedure and then needs to get the response of the stored procedure back to the variable i declared in the method. private string GetFromCode(string strWebVersionFromCode, string strWebVersionString) { //call stored procedure } strWebVersionFromCode = GetFromCode(strFromCode, "web_version"); // is the var which will store the response.how should I do this?Please assist.
View 3 Replies
View Related
Feb 10, 2008
Hi there!Basicly I only want to retrieve the value of the field "FirstTime" from a record as shown below:1
2 Dim ProdUserID As String = "samurai"
3
4 Dim LoginSource As New SqlDataSource()
5
6 LoginSource.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString1").ToString()
7
8 LoginSource.SelectCommandType = SqlDataSourceCommandType.Text
9 LoginSource.SelectCommand = "SELECT FROM aspnet_Users (FirstTime) VALUES (@FirstTime) WHERE UserName=@ProdUserID"
10
11 Dim SeExiste As Boolean = LoginSource.SelectParameters.GetValues("@FirstTime")
12
This is the error reported:Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30455: Argument not specified for parameter 'control' of 'Public Function GetValues(context As System.Web.HttpContext, control As System.Web.UI.Control) As System.Collections.Specialized.IOrderedDictionary'. Please can you answer in the same logical schema? I'm a newbie so if you may, describe the process step by step. It would be easier for me to understand.Thanks in advance.
View 1 Replies
View Related
Mar 10, 2008
What am I forgetting to do? I am setting the SELECT parameter 'techcode' in the code behind trying to paqss it as the ZWOP in my SQL Select statement but it is not getting to the SQl SelectParameters statement. Do I need to place a TextBox control on the ASPX page to hold it?
ERROR: Exception Details: System.InvalidOperationException: Could not find control 'techcode' in ControlParameter 'ZWOP'.
CODE BEHINDint techcode;protected void Page_Load(object sender, EventArgs e){ techcode = 11; }
ASPX CODE. . . SelectCommand="SELECT [ZL_ID], [complete], [error], [Zip], [ZipCity], [ZipState], [ZWOP] FROM ZipData WHERE ([complete] = 0 OR [complete] IS NULL ) AND [ZWOP] = @techcode ORDER BY Zip" <SelectParameters> <asp:ControlParameter ControlID="techcode" Name="ZWOP" PropertyName="SelectedValue" Type="Int16" /> </SelectParameters>
View 8 Replies
View Related
Apr 3, 2008
What im looking to do is put a checkbox on my page and if the box is checked have it add a where clause to the sql statement.
The most i have seen with selectparameters is for it to basically take the value of the given control (or whatever) and dump it in to a query.
In this case what i would like to do is if the box is not checked it has my basic query run Select * from Table
and if the box is checked i would like it to run Select * from table where status='completed'
basically a check box that shows only completed items.
wasnt sure if i could do this with just the sqldatasource control and some selectparameters or if i had to write some code.
Thanks
Justin
View 5 Replies
View Related
Jan 29, 2008
Hi,
I just have a Dataset with my tables and thats it
I have a grid view with several datas on it
no problem to get the data or insert but as soon as I try to delete or update some records the local machine through the same error
Unable to find nongeneric method...
I've try to create an Update query into my table adapters but still not working with this one
Also, try to remove the original_{0} and got the same error...
Please help if anyone has a solution
Thanks
View 7 Replies
View Related
Oct 24, 2006
Hi , I am trying to write a report generator by simply using a form and then a gridview that query's the database based on what the user selects on the form. Anyways, I update the SQL parameters similar to below code. I just want to know how i can tell the parameter to get ALL values from the parameter instead of a specific value. For example if the user wanted to see ALL the records for CustomerName what would i set the parameter default value to? I tried the asterisk but that did not work. Please guide me....Thanks! MattSqlDataSource1.SelectParameters["CustomerName"].DefaultValue = "some value";<asp:SqlDataSource ... > <SelectParameters> <asp:Parameter Name="CustomerName" /> </SelectParameters></asp:SqlDataSource>
View 1 Replies
View Related
Feb 16, 2007
Hi,
I am using Visual Web Developer 2005 Express Edition.
I am trying to SELECT three information fields from a table when the Page_Load take place (so I select the info on the fly). The refering page, sends the spesific record id as "Articleid", that looks typically like this: "http://localhost:1424/BelaBela/accom_Contents.aspx?Articleid=2". I need to extract the "Article=2" so that I can access record 2 (in this example).
How do I define the SelectParameters or QueryStingField on the fly so that I can define the WHERE part of my query (see code below). If I remove the WHERE portion, then it works, but it seem to return the very last record in the database, and if I include it, then I get an error "Must declare the scalar variable @resortid". How do I programatically set it up so that @resortid contains the value that is associated with "Articleid"?
My code is below.
Thank you for your advise!
RegardsJan/*******************************************************************************
* RETRIEVE INFORMATION FROM DATABASE
*******************************************************************************/
// specify the data source
string connContStr = ConfigurationManager.ConnectionStrings["tourism_connect1"].ConnectionString;
SqlConnection myConn = new SqlConnection(connContStr);
// define the command query
String query = "SELECT resortid, TourismGrading, resortHits FROM Resorts WHERE ([resortid] = @resortid)";
SqlCommand myCommand = new SqlCommand(query, myConn);
// open the connection and instantiate a datareader
myConn.Open();
SqlDataReader myReader = myCommand.ExecuteReader();
// loop thru the reader
while (myReader.Read())
{
Label5.Text = myReader.GetInt32(0).ToString();
Label6.Text = myReader.GetInt32(1).ToString();
Label7.Text = myReader.GetInt32(2).ToString();
}
// close the reader and the connection
myReader.Close();
myConn.Close();
View 3 Replies
View Related
Apr 4, 2007
Hello,
I am sure there is a way to do this programmatically, but it is just not sinking in yet on how to go about this. I have a page where I use a dropdownlist that goes into a gridview and then the selected item of the gridview into the detailsview (typical explain seen online). So, when selecting from the dropdownlist, the gridview uses a controlparameter for the selectparameter to display the appropriate data in the gridview (and so on for the detailslist).
My question is - I wanted to use this same page when coming in from a different page that would utilize querystring. So, the parameter in the querystring would be for what to filter on in the gridview, so the dropdownlist (and that associated controlparameter) should be ignored.
Any suggestions on how to go about this? I assume there is some check of some sort I should in the code (like if querystring is present, use this querystringparameter, else use the controlparameter), but I am not sure exactly what I should check for and how to set up these parameters programmatically.
Thanks,
Jennifer
View 5 Replies
View Related
Oct 24, 2006
Hi,I have a GridView which is bound to a SqlDataSource that connects to Oracle. Here's the code: <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:OracleConnectionString %>"
ProviderName="<%$ ConnectionStrings:OracleConnectionString.ProviderName %>" SelectCommand="SELECT QUIZ.TITLE FROM QUIZ WHERE (QUIZ.USERNAME = @UserName)"> <SelectParameters> <asp:SessionParameter Name="UserName" SessionField="currentUser" Type="String" /> </SelectParameters> </asp:SqlDataSource> As you can see I'm trying to pass the value of the "currentUser" session variable to the query. I get an error message "ORA-xxx Illegal name/variable". Where am I going wrong? I tested the connection by placing a specific value instead of the "@UserName" and it worked.
View 1 Replies
View Related
Nov 24, 2006
Column1 in table 1 has a range from 1 to 5 (int)
A CheckboxList displays these 5 items. When checked (for example 1 and 4) I want a gridview with sqldatasource=sqlProducts to display the records where column1 values 1 or 4.
When I use the code below I only get the records where column1 values 1....
<asp:SQLDataSource id="sqlProducts" Runat="Server" SelectCommand="Select * From Table1 where Column1 IN (@CBLchecked_items)" ConnectionString="<%$ ConnectionStrings:pubs %>"> <SelectParameters> <asp:ControlParameter Name="CBLchecked_items" ControlID="CBL" propertyname="SelectedValue" type="String" /> </SelectParameters></asp:SQLDataSource>
View 2 Replies
View Related
Feb 28, 2007
ALTER PROCEDURE dbo.Default_Edit1
(
@ID int,
@Family Nvarchar (100) OutPut
)
AS
/* SET NOCOUNT ON */
SELECT @Family=Family FROM Table1 where (ID=@ID)
RETURN
SqlDataSource1.SelectParameters.Add("ID", Me.GridView1.DataKeys(CInt(e.CommandArgument)).Item(0))
SqlDataSource1.DeleteCommandType = SqlDataSourceCommandType.StoredProcedure
SqlDataSource1.SelectCommand = "dbo.Default_Edit1"
SqlDataSource1.SelectParameters("Family").Direction = Data.ParameterDirection.Output
Label3.Text = SqlDataSource1.SelectParameters("Family").Direction.ToString()
it's have error
I went to return 1 fild
??
View 2 Replies
View Related
Mar 2, 2007
I Have This StoredProcedure
ALTER PROCEDURE dbo.Default_Edit1
( @ID int, @Family Nvarchar (100) OutPut
)
AS
SELECT @Family=Family FROM Table1 where (ID=@ID)
RETURN
I went to use SqlDataSource1.SelectParameters to Return Data
Ho to get and set @ID , @Family with SelectParameters ?
View 3 Replies
View Related
Nov 14, 2007
I have a simple gridview that loads on page load. It uses an on page sqldatasource declaration in which there's a parameter in which value is already available in cookies. I added an asp:HiddenField and set that value on PageLoad() to the value of the cookies. I then set a FormParameter in the sqldatasource mapped to that hidden field. However that appears to have no effect at all. I'm guessing the sqldatasource will only use the form field after postback.
View 2 Replies
View Related
Jan 14, 2008
Hi everyone,
I am building a search page and am a bit stuck.
The page has an sqldatasource with no select command and i am passing the select command and parameters depending on the optionsm selected.
If a tick box is ticked and a drop down selected i need to add a parameter to the datasource and generate the select command.
then if 1 and or 2 trext boxes are filled in, add the 1 or 2 select parameters then generate the select command.
The select command is correct as far as i can tell , but the parameters are not being passed to the datasource so it doesn't select anything.
my code behind is in the page load handler and at the moment only adds the parameters in one place so i could test.
Does anyone have any idea what i have done wrong?
Cheers
Chris
CODE BEHINDProtected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim SQLstr As String
If cb_Today.Checked = True And dd_Area.SelectedValue.ToString <> "" ThenLocManSearch.SelectParameters.Add("Area", TypeCode.String, dd_Area.SelectedValue.ToString())
SQLstr = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%" & dd_Area.SelectedValue.ToString() & "%') AND ([available] LIKE '%" & Date.Today & "%') AND ([viewable] = 'True')"
ElseIf cb_Today.Checked = False And dd_Area.SelectedValue.ToString <> "" Then
SQLstr = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%" & dd_Area.SelectedValue.ToString() & "%') "
ElseIf txt_FName.Text <> "" And txt_LName.Text <> "" And cb_Today.Checked = False And dd_Area.SelectedValue.ToString = "" Then
SQLstr = "SELECT * FROM [LocMan_CV] WHERE ([FirstName] LIKE '%" & txt_FName.Text.ToString() & "%') and [LastName] LIKE '%" & txt_LName.Text.ToString() & "%')"
ElseIf txt_LName.Text <> "" And cb_Today.Checked = False And dd_Area.SelectedValue.ToString = "" Then
SQLstr = "SELECT * FROM [LocMan_CV] WHERE ([LastName] LIKE '%" & txt_LName.Text.ToString() & "%')"
ElseIf txt_FName.Text <> "" And cb_Today.Checked = False And dd_Area.SelectedValue.ToString = "" Then
SQLstr = "SELECT * FROM [LocMan_CV] WHERE ([FirstName] LIKE '%" & txt_FName.Text.ToString() & "%')"
End If
Response.Write(SQLstr)
LocManSearch.SelectCommand = SQLstr
End Sub
SQL DATA SOURCE
<asp:SqlDataSource ID="LocManSearch" runat="server" ConnectionString="<%$ ConnectionStrings:MYLOCDEVConnectionString %>" >
<SelectParameters></SelectParameters>
</asp:SqlDataSource>
View 4 Replies
View Related
Mar 22, 2008
Hello to all coding members!
I'm building my first ever complete website in the ASP.net VB language and I have to say, I'm pretty happy that I was able to learn from this website and to gain some ground.
Data retrieval and editing from tables and databases was very intuitive with the Visual Web Developer IDE. I even learnt simple ways to implement (and to script a bit of) login pages to make my visitors feel "at home" in my website.However, when I wanted to implement simple Business Logic into one of my ASP.net page, i happen to stumble upon a block.Business Logic: To have the server go through the whole table of storybook entries submitted by many users, but only pull out the storybook entry(s) that belong to the logged-on user.Hence, let me drill down to my specific questions:
I will be using VB. Coming from a JavaScript genre, my concern is: will putting the Business Logic code into a code-behind page (.vb) or dumping it onto the page itself have any errors or effects?
View 8 Replies
View Related
Jul 23, 2007
What is the C# code I use to do this?
I'm guessing it should be fairly simple, as there is only one row selected. I just need to pull out a specific field from that row and then insert that value into a different SqlDataSource.
View 7 Replies
View Related
Mar 8, 2007
i am using visual web developer 2005 with SQL Express 2005 with VB as the code behindi have one database and three tables in itfor manipulating each table i am using separate SqlDataSource() is it sufficient to use one SqlDataSource() for manipulating all the three tables ? i am manipulating all the tables in the same page only please help me
View 1 Replies
View Related
Nov 14, 2003
is this the best and fastest method to connect to a database for DataGrid databind?
---------
Dim MyConnection As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionStringSQL"))
Dim MyCommand As SqlCommand = New SqlCommand("sp_BuddiesPendingSelect1", MyConnection)
MyCommand.CommandType = CommandType.StoredProcedure
MyCommand.Parameters.Add(New SqlParameter("@UserID", intUserID))
MyConnection.Open()
Dim dr As SqlDataReader = MyCommand.ExecuteReader()
DataList1.DataSource = dr
DataList1.DataBind()
dr.Close()
MyConnection.Close()
-----------------------
or should i use a DataAdapter and fill a DataSet and then attach the DataSet to the DataGrid?
View 3 Replies
View Related
Feb 6, 2006
I have been using VB6 for a long time now and had no problems using ADODB.Recordset.I had a module to which I would send my recordset (byref) and the SQL command (byval) and use the resultant recordset for adding, modifying or deleting records.How can I do the same with VS2005? This is a major problem as there are dataadapters, grids, datareaders etc.Does someone have a simple method to get the recordset so that I can modify the record using the code (eg: .Addnew/.Delete/.Update) and Close the connection?Please note that I do not need to display anything and have to run 40/50 AddModDel for every click of the program.Any help is greately appreciated. Thanks in Advance.
View 1 Replies
View Related
Nov 11, 2004
If you not familiar with it, the <a href="http://www.stephenforte.net/owdasblog/permalink.aspx?guid=2b0532fc-4318-4ac0-a405-15d6d813eeb8">Rozenshtein Method</a> uses SQL to create a crosstab. The concept is a stroke of genius but I'm having trouble getting it to work on one of production databases.
I successfully used the Northwind example explained at Stephen Forte's site (see the link above)...but no luck on my real world problems.
I can get the date statements to resolve to 0 correctly, but when I try to aggregate the data - the statements are turning into 1 multiplying the aggregate data for each cell...which fills in the same data across the entire row.
For example (the columns represent the time period),
GROUP T1 T2 T3 T4
group1 9 9 9 9
group2 3 3 3 3
group3 5 5 5 5
My sql code is:
SELECT dbo.tblHassBatch.ProdLine,
COUNT((dbo.tblHassUUT.UnitID)*(1-ABS(SIGN(datediff(dd,dbo.tblHassBatch.StartTime,ge tdate())-0)))) AS Today,
COUNT((dbo.tblHassUUT.UnitID)*(1-ABS(SIGN(datediff(ww,dbo.tblHassBatch.StartTime,ge tdate())-0)))) AS [This Week],
COUNT((dbo.tblHassUUT.UnitID)*(1-ABS(SIGN(datediff(mm,dbo.tblHassBatch.StartTime,ge tdate())-0)))) AS [This Month],
COUNT((dbo.tblHassUUT.UnitID)*(1-ABS(SIGN(datediff(mm,dbo.tblHassBatch.StartTime,ge tdate())-1)))) AS [Last Month]
FROM dbo.tblHassBatch INNER JOIN
dbo.tblHassUUT ON dbo.tblHassBatch.BatchID = dbo.tblHassUUT.BatchID
GROUP BY dbo.tblHassBatch.ProdLine
Am I overlooking something here? I'm pulling my hair out b/c if this works it's really going to provide a great solution for a project I'm working on...but I can't seem to figure it out.
Any help is appreciated.
Thanks,
Alex8675
View 12 Replies
View Related
Jan 25, 2006
I'm not really strong in SQL. My goal is to compare the beginning mileage of a vehicle record with it's previous ending mileage reading. I have something that works, but it feels clunky. I wonder if there is a better method, ie a join. Here's what I have:
SELECT A.Trolley_num, A.Date, A.Speedo_start, A.Speedo_end,
(SELECT B.Speedo_end FROM Daily_Trolley AS B
WHERE B.Trolley_num = A.Trolley_num
AND B.Date =
(SELECT Max(Date) FROM Daily_Trolley AS C WHERE C.Trolley_num = A.Trolley_num
And C.Date < '1/23/2005')) AS PrevSpeedoEnd
FROM Daily_Trolley AS A
WHERE A.Date='1/23/2005'
ps: I inherited this db; I'm aware that "Date" should not have been used as a field name.
View 2 Replies
View Related
Feb 26, 2004
'TOP 1' or 'DISTINCT' or 'MAX'
Any sugestions on which is better to use if I need to select a record that has the highest value - could be a INT or sometimes a DATETIME.
View 14 Replies
View Related
Apr 17, 2008
Hello, I've a table "TblSales" with this structure: Year (integer), CustomerId (integer) and Sales (float).
SELECT Year, CustomerId, Sales FROM TblSales
Year;CustomerId;Sales
2000;1;100
2000;1;50
2000;2;200
2001;1;10
2001;2;20
etc...
I've 10 distinct CustomerId (from 1 to 10)
I want to make a row for every year with x columns (1 for every diferent CustomerId) with the sum of sales of this Customer on this year.
I've thounsdands rows. What's the more eficient method?
Thanks
View 2 Replies
View Related
Aug 3, 2007
Hi Team
Can someone please tell me how to fix this following error in SQL 2005
When trying to create a maintenance plan,
Method Not Found:'Void Microsoft.SqlServer.Management.DatabaseMaintenance.TaskUIYtils..ctro()'
(Mircosoft.SqlServer.MaintenancePlanTasksUI)
Any assistance would help
Thanks
View 1 Replies
View Related
