I have a field in my SQL Server 2005 database of type numeric(18,3)
In code, I treat the value as decimal
When creating my command parameters, this is how I'm declaring them:
prm.SqlDbType = SqlDbType.Decimal;
prm.Precision = (byte)int.Parse("18");
prm.Size = int.Parse("0");
prm.Scale = (byte)int.Parse("3");
Inserting a number like 5.687 is rounding to 6.000 anyone know why it is doing that?
This give me 6 digits to the right of the decimal point - can round it to 2???
CONVERT (decimal(18 , 2), 1.0 * NULLIF (vVotesR, 0) / NULLIF (vVotesR + vVotesD, 0) * 100)
Hi,
I have a decimal field in SQL Server 2000 which has a precision value of 3 and scale 1. I will be storing values ranging from 0.5 to 10.0 in there. However, in my asp.net web form, if I select the value 2.5 from the DropDownList, SQL Server stores it as 3.
Can anyone tell me why this is happening and give me some pointers on what I can do to fix it? Your help is much appreciated.
What is the best way to force a 2 digit decimal place without rounding?
For example select price*UOM returns
47.1294
3.255
.5
8
.49
What i want to be returned is
47.12
3.25
8.00
.50
.49
Thanks,
Jim
Hello I'm trying to write a SQL Statement along the lines of....
SELECT stringField + ' : ' + STR(decimalField) AS myField FROM tablename WHERE myCondition = myValue
Where stringField is a String field and decimalField is a Decimal Field in my Table.
In this statement it converts the decimal field to a string value so that it doesn't throw a conversion error but unfortunatly it seems to round up the value to an integer value and cuts off all my decimal places.
How can I get it to keep the Decimal Places?
hi all
I have a problem with SQL rounding my decimals up when I pull them from a temp table that has the column set as VARCHAR. What is happening is I am pulling the info from a flat file but each column has "" around each field so I must make the temp table columns all VARCHAR so I may pull the info from the file properly. So after the info has been extracted, I run an update statement on the temp table to remove all quotes. Once this is done, the revised info is inserted into a staging table and any field that is a represented as a decimal is labled as such in the staging table.
What I am running into is when the info is inserted into the staging table, the decimals are rounded up to whole values. The column has been checked to verify that it is indeed a decimal. I even have a CAST statement in the insert hoping to combat the rounding issue, but it is not helping.
So what reason(s) would my decimals be rounding up?
Thanks alot
I would like the
DECLARE @MyPay decimal(5,9);
SET @MyPay = 258.235543210;
SELECT CAST(@MyPay AS decimal(5,2))
This is what the resultset is currently with the code above:
258.24
I would like to Not have the value round up. I would like to always show only the first two digits to the right of the decimal and not perform any rounding.
This sounds so simple but yet don't know why it doesn't work.
i've got two decimal numbers in columns
closingUnits = 25093.53640
closingAmt = 59110.33
i use a derived column transformation to generate a string column which is the division of those two above.
mystrfield = closingAmt /closingUnits = 2.355599
what i want is cast it to just 4 decimal points when i run the expression below it cast it to 4 decimal points but it doesn't do any rounding.
the value i get is 2.3555 when i should get 2.3556
(ISNULL(closingAmt ) || closingUnits == 0) ? "0.0000" : ((closingAmt / closingUnits) < 1 && (closingAmt / closingUnits) > -1 ? "0" : "") + (DT_WSTR,15)(DT_DECIMAL,4)(closingAmt / closingUnits)
How do you display 12.38 as 1238 I can't use round.
View 2 Replies View Relatedhow to round the nearest value after round of decimal and return integer.
declare @data decimal(18,2)
set @data = 5.55
-- output
select '5'
set @data = 5.58
-- output
select '6'
My code is rounding my values incorrectly and I'm not sure why. In this example, the numerator is 48 and the denominator is 49 which is .9795 but my SQL is producing 97.0. I would like to result to be 97.9
CONVERT(decimal(4,1), (SUM(CASE Score_CorrectID WHEN 1 THEN 1 ELSE 0 END +
CASE Score_MiniMiranda WHEN 1 THEN 1 ELSE 0 END +
CASE Score_RepAssistance WHEN 1 THEN 1 ELSE 0 END+
CASE Score_Tone WHEN 1 THEN 1 ELSE 0 END +
CASE Score_Consol_Default WHEN 'OK' THEN 1 ELSE 0 END) * 100)
/
SUM(CASE WHEN Score_CorrectID IS NULL THEN 0 ELSE 1 END +
CASE WHEN Score_MiniMiranda IS NULL THEN 0 ELSE 1 END +
CASE WHEN Score_RepAssistance IS NULL THEN 0 ELSE 1 END+
CASE WHEN Score_Tone IS NULL THEN 0 ELSE 1 END +
CASE WHEN Score_Consol_Default IS NULL THEN 0 ELSE 1 END)) AS Avg_Percent_Actions
Hi all,
I'm trying to update a decimal field with a single decimal number (1.8) the problem i'm having, is that it's rounding the number up (2). I would've thought that a decimal datatype would keep the decimal places correct?
This is quite annoying.. I've been searching around the web for an answer.. To no avail (I'm probably asking the wrong question)
Can someone please point me in the right direction?
I want to replace the contents of a value column with itself but rounded to 2 decimal places.
The current column is a double and I have tried to perform this using the following expression but it fails to work.
Code Snippet
Round(cc_vl,2)
How should I achieve this?
How do I dim SqlDbType in my code?Dim conn As New Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("TrainUserConnectionString").ConnectionString)
Dim cmd As New Data.SqlClient.SqlCommandWith cmd
.Connection = conn
.CommandType = Data.CommandType.StoredProcedure
.CommandText = "UpdateTopicscmd.Parameters.Add("@classificationID", SqlDBType.Int)cmd.Parameters.Add("@TitleID", SqlDBType.Int)
conn.Open()
For Each item As ListItem In CheckBoxList1.Items
If item.Selected Thencmd.Parameters("@classificationID").Value = item.Valuecmd.Parameters("@TitleID").Value = DropDownList1.SelectedValue
cmd.ExecuteNonQuery()
End If
Next
conn.Close()
End WithEnd Sub
End Class
Hello,Im calling a stored proc that has a numeric value as a varible.In the asp im using the code:myPrivate.Parameters.Add("@memberID", SqlDbType.Decimal, 18).Value = Decimal.Parse(uxToText.Text);I'm using decimal as there is no numeric sqldb type, is this correct? Also is the decimal parse correct as Im getting a 'Input string was not in a correct format' error.Thanks
View 2 Replies View RelatedI have an overloaded method in my data access layer that I use to load the parameters into a command object. One of these overloaded methods is as follows:
public void LoadSqlParameter(string name, string value, ParameterDirection direction){ param = new SqlParameter(); param.ParameterName = name; param.Value = value; param.Direction = direction;
param.SqlDbType = SqlDbType.VarChar;
cmd.Parameters.Add(param);}
Will using a SqlDbType of VarChar cause me any problems if the actual parameter in the stored procedure is a Char?
Am I better off leaving out the line that specifies the type?
Thanks
Hi,
I am creating a parameter of type text, and using either of the 3 statements below, to specify the size of the text. Unfortunately none of the statements put all the text into the database.
The receiving column is Text(16) and Text in Row is turned off.
I really would appreciate any help with this.
Many thanks,
Polly Anna
sqlParam = New SqlClient.SqlParameter("@varResponse", SqlDbType.Text) ', 2147483647, ParameterDirection.Input)
or
sqlParam = New SqlClient.SqlParameter("@varResponse", SqlDbType.Text)
or sqlParam = New SqlClient.SqlParameter("@varResponse", SqlDbType.VarChar, 4000)
then
sqlParam.Value = Me.ResponseText
My app uses .net 1.1 and MS SQL 2005 as backend. How to add a SqlParamter that is varchar(MAX)?SqlParameter myParameter = new SqlParameter("@Description",SqlDbType.VarChar,whatToPutHere?,ParameterDirection.Input, true,0,0,"Whatever",DataRowVersion.Current,"Whatever");
View 4 Replies View RelatedHi,
My checkbox status is saved as SqlDbType.Bit in MS SQl Server database.
When I use the following code to retrieve it, it does not work.
myRow[myColumn].ToString()=="1"
I appreciate your kind assistance.
Thank you.
i have string variable as,
String str="Int";
now, while assigning sql parameters, i want
param.SqlDBType=SqlDBType.Int;
but, value of Int is dynamic. it may be string or double so,
i want it to be as,
param.SqlDBType=(SqlDBType)str;
but its not acceptable(its invalid cast).
in any way can i do it and how?
regards---
How much if any of a perf gain is there when you specify the SqlDbType on a parameter?
View 1 Replies View RelatedI am working with a legacy SQL server database from SQL Server 2000. I noticed that in some places that they use decimal data types, that I would normally think they should be using integer data types. Why is this does anyone know?
Example: AutomobileTypeId (PK, decimal(10,0), not null)
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies View RelatedHello.
My database stores the decimals in Spanish format; "," (comma) as decimal separator.
I need to convert decimal nvarchar values (with comma as decimal separator) as a decimal or int.
Any Case using CAST or CONVERT, For Decimal or Int gives me the following error:
Error converting data type varchar to numeric
Any knows how to resolve.
Or any knows any parameter or similar, to indicate to the Cast or Convert, that the decimal separator is a comma instead a dot.
Hello!
I would like to cast (convert) data type decimal(24,4) to
decimal(21,4). I could not do this using standard casting function
CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable)
because of the following error: "Arithmetic overflow error converting
numeric to data type numeric." Is that because of possible loss of the
value?
Thanks for giving me any advice,
Ziga
I am trying to insert a large amount of data from a web form I created into a "text" field in my DB. Problem is its oly entering the 1st 16 characters. I can see why but I dont understand what I need to do to avoid this shortcomming. Ive searched the forums here and in google groups to no avail :(
<code>
sqlCommand.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Content", System.Data.SqlDbType.Text, 16, "Content")).Value = ftbContent.Text
</code>
How do I need to restructure the above line?
Any help would be appreciated.
TIA,Stue
Here is my code:
Dim oParameter As New System.Data.SqlServerCe.SqlCeParameter("@pMyParameter", SqlDbType.Binary, 3000)
If you set a watch on this object, the size is set back to 510. I have tried resetting the size back to 3000 after construction using oParameter.Size, but it doesn't change from 510. If the command is executed using ExecNonQuery, this causes the bytes to get cut off at 510 bytes and returns the error: Byte array truncation to a length of 510.
Can I insert data into SQL Server 2005 Mobile Edition, into a field of data type binary(3000) using .NET CF 2.0 via SqlServerCe objects?
Thanks for any help.
Kirk
I wanted to convert a dataset from vb.net (2.0) to an .XLS file, by MS Jet. My national standard is using decimal commas, not decimal points for numbers signing the beginning of decimal places.
But the MS Jet Engine uses decimal point,in default. Therefore, in the Excel file only string formatted cells can welcome this data, not number formatted.
How can I solve or get around this problem? (with jet if it possible)
iviczl
Hi I was hoping that someone might be able to help me with this.
I'm trying to figure out why my VB.net code below generates 0 or 1 but doesn't insert it when I can execute my stored procedure with: exec sp 0
myParm = myCommand.Parameters.Add("@bolProMembCSNM", SqlDbType.Bit)
myParm.Value = IIf(CBool(rblProMembCSNM.SelectedItem.Value) = True, 1, 0)
I've tried everything I used to use with Classic ASP and am stumped now.
Any ideas? I will have to do this for numerous controls on my pages.
Thanks in advance for any advice.
I'd like to convert a Decimal value into a string so that the entireoriginal value and length remains intact but there is no decimal point.For example, the decimal value 6.250 is selected as 06250.Can this be done?
View 6 Replies View RelatedHi all,
I am designing some reports for a German branch of my company and need to replace decimal point with a comma and the thousand comma seperator with a decimal point.
e.g.
‚¬1,500,123.00 to ‚¬1.500.123,00
Is there a property that I can change in the report designer to allow this to happen or is this something I need to convert in a Stored Proc.
Any help would be much appreciated
Thanks!
Hi, I'm specify the size of the interger dataypes in my code behind files; e.g.
commad.Parameters.Add("@SomeID", SqlDbType.Int, 4)
I know it may seem silly, but I have to ask:
Will specifying ths size (i.e. 4) eventually stop the auto-icnrement of the underlying primary key SomeID in the SQL Server 2005 database?
What restriction, if any, does this place if the next SomeID value is 10000, which is 5 digits? or 999999, which is 6 digits?
Thank you
I need to store decimal values: decimal(20,15) in my SQL Server 2005 database.
I load data from flat file, convert it using Data Conversion Task to decimal(with scale: 15) and try to save it using OLE DB Destination.
It works fine for 4 digits after the decimal (like 1.1234), but always failes for more than 4 digits (1.12345).
Is the decimal limited to scale 4 ???
Thank you for your help!
Anna