Hi ,
Iam using sqlserver reporting services 2005 and in one case I need to find out the difference between two datetime parameters. I need the difference with the time. Can you please help me in this....
how to connect sqlserver reporting services
can i connect through sql server management studio
Note: this is no joke a serious Question
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
Hi:
I am getting access denied error "cannot connect to server" while trying to connect Integration Services. I am trying to connect from my laptop to the SQLSERVER database server.
I followed the document "Connecting to a Remove Intergration Services Server" , doc id: aa337083.
But I can connect to IS if I log remotely to the server.
Any thoughts on this ?
Thanks
-Rajesh
I am getting following errors.
===================================
Cannot connect to cvsslmdd1-vm.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "cvsslmdd1-vm" failed:
Access is denied.
.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "cvsslmdd1-vm" failed:
Access is denied.
.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
Hello to everybody,
Installed the Integration Services to the existing Sqlserver 2005. But I am not seeing the 'Integration Services' in the
SQL Server Management Studio, like the 'SQL Server Agent' in the server. I am not sure what the next step is after installing the 'Integration Services'. Appreciate any help on this. Thanks for your time in advance.
Thanks,
Gopal.
Hello,
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
thank you
regards
Andreas
I am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
Hi,
Can we install reporting services 2005 in a machine in which is not installed SQL server 2005.?
Thanks
Hello,
I'm trying to make some reports using the sql 2005 reporting services addin for Visual Web Developer Express 2005. I download the add-in here. So far it installed "successfully". The problem i have is when i try to add a datasource to the report at "Report > Data Sources... " it gives me an error saying: "The system cannot find the file specified."
Another Error it gives is that when I try to drag a DataSet field from the Website Data Sources toolbox tab the visual web developer crashes :/.
An observation that I don't know if this is ok is when I create a new Data Source it creates an App_Code folder inside where my report is /Reports/ and there it saves the DataSet. Just an observation...
This is my development enviorment:
Laptop:
Windows Vista Home Premium (Up to date)
Microsoft Visual Web Developer 2005 with Service Pack 1
Reporting Add-In for Microsoft Visual Web Developer 2005 Express
Server:
Microsoft Windows Server 2003
IIS 6.0
ASP.NET 2.0
Microsoft SQL Server 2005 Express
Reporting Services for SQL Server 2005 Express
Here are some pictures of the erros:
Error 1
Error 2
Please could someone help me fix this?
Thanks in advance.
Hi,
I want to get data from Oracle 10g Stored procedure to Reporting Services 2005. I could pass a SQL text and get a record set, but I want to execute a store proc and get the record set.
1. Add New Data Source
2. Choose Type : Oracle and connection tested OK
3. { call Test_Package.Test_Procedure(?) } is it wrong... how to write???
There is an error in the query. ORA-00911: invalid character
Also make sure that you use the text-based generic query designer (2 panes !) instead of the visual query designer (4 panes) - you can switch between them through an icon on the toolbar in the data view of report designer.
Question : I tried many methods but unable to solve it...
create or replace
PACKAGE Test_Package
AS TYPE Test_Type IS REF CURSOR RETURN Test_Table%ROWTYPE;
END Test_Package;
create or replace PROCEDURE Test_Procedure (
Test_Cursor IN OUT Test_Package.Test_Type,
Test_Parameter IN Test_Table.ID%TYPE
)
AS
BEGIN
OPEN Test_Cursor FOR
SELECT *
FROM Test_Table WHERE Test_Table.ID >= Test_Parameter;
END Test_Procedure;
The below site gave some example but i could not solve it... any suggestions greatly appreciated...
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=357121&SiteID=17
http://groups.google.com/group/microsoft.public.sqlserver.reportingsvcs/browse_frm/thread/bbc613c4529ed3cd/696624ec4ba70937?q=oracle+stored+procedures
I'm using Report Builder to create a new report. The problem I'm having is that once I choose a Field from an Entity in the Entities list I can only choose Fields from that Entity. For example, I have two Entities, one called Customers and the other called Delivery. Within the Customer Entity I have several Fields that I want to add to my report, say First Name and Last Name. From the Delivery Entity I have a Status Field which I'd like to include but because I have no way to get back to my Entities list, without removing the Fields from my Report, I can't include that Field.
If I remove the Fields from my report, the Entities list then populates with both the Customers and Delivery Entities, THEN I can choose my Delivery Entity and select the Status Field. But I can't get back to the Customer Entity. I keep going back and forth.
I'm not exactly sure what I'm doing wrong, or if there is a more efficient manner to accomplish what I'm trying to do.
Thanks.
What is the best option to monitor user accesses to published reports? IT department wants to have an idea about the need (value and time) of produced reports.
Regards,
Vitor Mota
Hi,
View 7 Replies View RelatedHello All,
I am getting the following error while I am connecting SQL 2005 reporting services through local and outside
http://localhost/reports
http://servername/reprots
I configured through all the stems through reproting services configuration
You advise/suggestion is greately appriciated.
Ven
---------------------------------------
Server Error in '/Reports' Application.
--------------------------------------------------------------------------------
An error occurred while parsing the configuration file. The ReportServerVirtualDirectory element is missing.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: An error occurred while parsing the configuration file. The ReportServerVirtualDirectory element is missing.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Exception: An error occurred while parsing the configuration file. The ReportServerVirtualDirectory element is missing.]
Microsoft.ReportingServices.Diagnostics.RSConfiguration.ThrowElementMissing(String element) +41
Microsoft.ReportingServices.Diagnostics.UIConfiguration.ParseXML(XmlNode node, RSConfiguration configObject) +1104
Microsoft.ReportingServices.Diagnostics.RSConfiguration.ParseDocument() +972
Microsoft.ReportingServices.Diagnostics.RSConfiguration.Load() +32
[ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.]
Microsoft.ReportingServices.Diagnostics.RSConfiguration.Load() +166
Microsoft.ReportingServices.Diagnostics.RSConfiguration.Construct(String configFileName) +62
Microsoft.ReportingServices.Diagnostics.RSConfiguration..ctor(String configFileName, String location) +296
Microsoft.ReportingServices.Diagnostics.RSConfigurationManager..ctor(String configFileName, String configLocation) +134
Microsoft.ReportingServices.UI.Global.get_ConfigurationManager() +84
Microsoft.ReportingServices.UI.Global.get_Configuration() +4
Microsoft.ReportingServices.UI.GlobalApp.Application_AuthenticateRequest(Object sender, EventArgs e) +84
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Hi,
I am trying to use reporting services 2005 with a VB SQL stored procedure that i created in visual studio using CLR.
The stored procedure was created successfuly in SQL server but while linking the report to the stored procedure, i am receiving the following message
"An error occurred while retrieving the parameters in the query.
The stored procedure 'mysp' doesn't exist.
Thanxs in advance
I have a sql server 2000 database and sql server reporting services 2000 installed on it i want to install 2005 sql reporting services on sql server 2000 Is Sql server reporting services 2005 works fine with sql server 2000 and what are the settings that i have to perform.
I am trying to learn Reporting Services using the title "MS SQL Server 2005 Reporting Services Step by Step" by Stacia Misner and Hitachi Consulting, published in 2006. I am experiencing problems with some of the exercises. I got as far as Chapter 4 when I followed directions to create a SQL statement to define a query string for a dataset. Pg 80:
select * from vProductProfitability
where year = 2003 and
MonthNumberOfYear = 1
The view vProductProfitability does not exist in the tutorial database that came with the book, rs2005sbsDW. The result of this query is the basis for the entire chapter on developing basic reports and I'm being denied a learning opportunity because the view does not exist. In short, I'm stuck.
I have tried to find somewhere at Microsoft to place this question and get some answers so I can continue thru the tutorial. To no avail. Does anyone have any suggestions?
BTW, the solution that came in the CD is also wrong because the query noted above is also in the solution.
This humble grasshopper seeks wisdom.
Respectfully Submitted,
Dave Matthews
Atlanta, GA
aka FlooseMan Dave
Why doesn't SQL Server 2005 need IIS for its http readiness while its Reporting Services do? Thanks.
View 2 Replies View RelatedSQL was installed w/o reporting previously by the other admin. How do i enable the reporting now?
View 6 Replies View RelatedMy first installation of SQL 2005 requires the use of Reporting Services. Is Reporting Services always installed on the same server as SQL Server 2005 or do I have the option of having it run outside of the database server? If I have this option, is this something that Microsoft recommends? I'm concerned with having IIS and SQL Server on the same server, however if that's the new 2005 best practice then there's not much I can do about it.
Thanks, Dave
Hi there
We've got 2 servers: one is dedicated database server (NSWNOFUSQD01) and the other one is application/web server (NSWNOFUAPA01).
We've installed the SQL server Database Services, Notification Services, Integration Services and Workstation components, Books Online and development tools into NSWNOFUSQD01 (databases server).
We leave Reporting Service cause we don't want to install the application on this box but we want to install onto different box but the reporting database need to install into NSWNOFUSQD01. So we've tried to install the reporting services into NSWNOFUAPA01 - app server. But while installing it we don't have an option to tell that the database is pointing to different server?!?!.
Any ideas? Are missing step here? I saw these environment working - web instaaling on the app server and database installing on database server.
Thanks
Hi,
I'm currently involved in a project where I am working on an application utilising ASP.NET with a SQL Server 2005 backend.
So far, it has worked well - however, there is a seperate team that has a bunch of reports using Reporting Services 2005 that we would like to display on our site.
Obviously, the 2.0 Reporting Services control is not going to work on 1.1, i was wondering is that any sort of way for me to display these RS reports on my 1.1 site?
Cheers
We are in the process of doing a side by side installation of the SQLserver 2000 and SQL server 2005 on the same server. To install theReporting services feature of SQL server 2005 requires IIS. We have aseperate web server running IIS that connects to the database server.My question is : can we still install Reporting services on thedatabase server without the IIS?Thank you
View 1 Replies View Related
Hi
i am working in vs.net 2005 (c#.net & asp.net), my application need reporting functionality, for that i am using Sql Reporting Services 2000 in vs.net 2005, and i am not able to generate the report, can any pls tell me how to use sql reporting services 2000 in vs.net 2005 and configuration setting etc...
it would really help more to build my applications in sophisticated way
kinds regards
sy
Hi,
Can anyone help me in this ?
Can we do event drive Programming things only in SQL 2005 Reporting Services without using VB.net ?
I want that on mouse move event or on focus on some particular cell of table or matrix a hidden picture or graph is visible.
I am using DUNDA's Plugins in my report.
Can anyone tell me how i can do this ?
RS_DBA
doing a presentation on SQL 2005 reporting services jus need to know whether .net 1.1 will be functional with it?
thanks.
When installing SQL Server 2005 Express with Advanced Services, everything installs except OWC11 and Reporting Services. The error is "Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:Program FilesMicrosoft OfficeOFFICE111033SETUP.CHM." But this is just saying to enter the product key for MS Office.
Can anyone help?
Hi,
Our team is developing an ASP.NET 1.1 Application that is written using VS2003 but using SQL Server 2005 as database. Can we use a Report Viewer Control that comes with SQL Server 2005 in our ASP.NET 1.1 application? If not, Can some one suggest some alternative way of showing SQL Server 2005 Reports in ASP.NET 1.1 application?
Thanks,
CodeKracker
Hi,
Using reporting services 2005 I tried to export report data to csv. But after a certain limit the csv does not generate and IE shows a page cannot be displayed error. Please let me know the below:
1) The limit for CSV on a 32 bit machine.
2) How to overcome this limit.
Thanks
i have now ordered my sql server 2000 reporting services non-evaluated edition. My new question involves installing it after i installed 2005 edition.
It seems that as long as i have a web home for my report projects
(2005), the server can hold output from the 2000 and 2005 versions.
But i'm wondering if i delete my 2005 version, and just have the 2000
version - will the web home for the 2000 version look the same
and it seems at least on the 2000 trial version level, there is no configuration options menus that really make it easy to establish a web
home server. ????
Please get back to me on clalbert@flash.net
Charles Albert
thanks
Hi,
I'm working with Vista + IIS7 + SQL Server 2005 SP2 (trial version entreprise) . When I try to access on this url : http://localhost/Reports/Pages/Folder.aspx, I have the error : "The reports server is not responding. Make sure it is operational and accessible from that computer.", and when I try to access on the other url : http://localhost/ReportServer/, the error is : "Erreur HTTP 500.0 - Internal Server Error". Virtuals Folders "Reports" and "ReportServer" have been correctly created in IIS7 and services of MSSQLSERVER have been correctly launched.
Do you have any idea?
Thanks in advance,
Michael Pailloncy