Sqlserver 7 To DB2 Replication..
Aug 3, 2001
hi there..
my problem is to replicate data between SQLSERVER 7 & DB2...
my sqlserver7 is on winnt4.0...
the DB2 is on as400 system which is a remote system...
as i m doing it for the first time....i dont know what to do...can u sugest the right way to do that...
what i m doing right now is that i m trying to do it using host microsoft data replicator(version1.0)...
what i have tried is..
1) installed sqlserver7 on winnt 4.0(service pack 5)
2) installed sqlserver7.0 on same m/c
3) applied service pack 3 on sqlserver
4) installed host data replicator on same m/c
5) installed sna server(version 4 service pack 3)
now the problem is when i m installing host data replicator its asking for StarSql driver....which is supposed to be bundled with sna server....
the second problem is when i m installing host data replicator its asking to configure ras service...is it necessary to configure ras ?...
besides this when i m running host data replicator...its giving Dr. watson error...does that mean my host data replicator is corrupt...
what should i do....
thanx in advance....
dolly
View 1 Replies
ADVERTISEMENT
Feb 24, 2003
Can I have multiple SQL Server Agents running concurrently?
I would like to have 10 instances of database running on my local SQL Server - each of these are Merge Replication to a unique database located offsite.
Do they all run through one SQL Server Agent?
If they do would this be a slow process as, I think, the SQL Server Agent queues the replications pending.
Thanks,
Bianca
View 1 Replies
View Related
Jul 29, 2006
Hi all,
We are using SQL Server 2005, on Windows server 2003 R2.
We Have Two Database Servers say DBServer1 and DBServer2, Now I wants to do Replication between these to servers, such that
1. The Changes at DBServer1 should be reflected at DBServer2
2. The Changes at DBServer2 should be reflected at DBServer1
3. Changes includes Data changes and Schema Changes
4. After every Synchronization Both Databases should be Identical
I tried doing so, what i did was
I cofigured Distribution at DBServer1, also Publisher and Publication at DBServer1
and Made a Subscription at DBServer2.
What I successfully done is
If Publisher means DBServer1 do some changes then it gets updated at DBServer2.
But New Rows added at DBServer2 doesn't gets added at DBServer1
Thanks in Advance,
Vishalgiri Goswami
Kalptaru Infosoft Pvt. Ltd.
View 4 Replies
View Related
Jun 15, 2006
I have a merge replication scenario where the technicians are filtered by their individual codes. Each technician has his own mobile device for collecting and synchronising data.
On initialisation of the subscription, the user should only get the data that is relevant to their code.
The client is staging the rollout to all of their technicians and as the system has grown, we have noticed that there are a number (getting larger every day) of updates that are creeping into the initialisation of each subscription.
My understanding is that an initialisation will only ever apply the inserts necessary to create the subscriber database.
Is my understadning incorrect?
Is the some parameter in the creation of the publication that we have set incorrectly?
Is there something wrong with SQLServer 2005 itself?
I am very interested to hear anyones comments or advice around this issue.
Thanks
Steve
View 4 Replies
View Related
Jan 27, 2006
I have smilar kind of an issue with replication. I had sucessfully done replication with Sqlce2.0 on sql server 2000. In development machine I had VS 2003, sqlce development tools.
Now I use the same code done in VS 2003 into VS2005, it sucessfully converted the code.
In server machine (win 2003) I installed sql server 2000, sql server 2000 service pack 4, SP4 merge replication components, sql server 2005 mobile server tools and .Net framework 2.0. Created pubication sucessfuly. In this machine I configured IIS as per the web synchronization wizard. Gave anyonymous permissions. Virual direcory is created sucessfully. I tested the server agent in IE http://myservername/aliasname/sqlcesa30.dll.
SQL Server Mobile Server Agent 3.0 is shown
My application opened successfuly in windows mobile 5.0 Pocket PC emulator. When try to sync its dislays error "A request to send data to the computer running IIS is failed, see Hrresult"
No firewall in both development and server machines.
The same code works if its sqlce20 perfectly with vs2003 code. Not in this
Can anyone tell me whats wrong in this?
Regards
Arif
View 5 Replies
View Related
May 10, 2007
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.IO;
namespace Predict.Services
{
public static class Foo
{
public static string GetIntradayQuote(string symbol)
{
string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
request.Timeout = 1000;
HttpWebResponse response = (HttpWebResponse)(request.GetResponse());
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close();
response.Close();
return returnQuote;
}
}
}
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
Regards,
Skipper.
View 1 Replies
View Related
Sep 20, 2006
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
View 1 Replies
View Related
Apr 18, 2008
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
View 1 Replies
View Related
Jul 29, 2005
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
View 2 Replies
View Related
Jun 14, 2006
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
View 1 Replies
View Related
Feb 9, 2006
Hello,
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
Thanks in advance,
TassosTS
View 1 Replies
View Related
Jun 20, 2007
Hello people.
I am in the process of planning a server upgrade to sql2005 x64.
I created 2 linked servers: one to a SQL2000 sp4 server and one to a SQL7.0 SP3.
I have the following error when I query the linked servers.
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "IVDM2K". The provider supports the interface, but returns a failure code when it is used.
I am aware of KB 906954.
http://support.microsoft.com/default.aspx?scid=kb;en-us;906954
I applied the instcat.sql on the SQL2000SP4 server and my linked server issues for that one are gone.
However, I ran the instcat.sql script on the SQL7.0 sp3 server and the linked server is still giving me an issue.
Can someone help me find a solution to this?
View 1 Replies
View Related
Apr 18, 2007
Regarding KB935356, is there a "post" service pack 2 update for SQLServer Express?
Thanks.
View 7 Replies
View Related
Jul 8, 2006
Hello Expert!
I have 2 Database €“ Access & SQLServer(ver 7)
I need to Import Data TblShift from Access to SQLServer €“ using DTS I€™ve done this successfully!
Now I want to use parameter so I only importing record within range (e.g. ShiftDate BETWEEN 05-24-2006 AND 06-23-2006)
In SQLServer, I have created table to store the date range as following:
TblParameter
DateFrom: 04/24/2006
DateTo: 05/23/2006
How do I use the date range from TblParameter(SQLServer) to import record from TblShift(Access) using DTS?
Is this possible or any better solution for this?
TIA
Regards,
View 4 Replies
View Related
Dec 29, 2005
Hi Friends,
Can some please let me know the differences between sqlserver 2000 and sqlserver 7.0
View 1 Replies
View Related
Jun 6, 2007
Hi,
I am new to SQL Server 2005. I tried connecting to my local machine by using my machine name as Server name and then tried running the following query:
SELECT * FROM SYS.Objects. It gives me following error:
Invalid object name 'sys.objects'.
Whereas, if I connect to my local machine using mahcinenameSQLEXPRESS, then the above mentioned query runs fine.
Why is this difference? What is the difference when I login in these 2 different ways.
Any help would be appreciated.
Thanks in advance.
Any help
View 1 Replies
View Related
Mar 29, 2006
Is there a way to transfer data from a SqlServer db to a SqlServer Express db. I tried to use the backup file of SqlServer, but this file is not valid for SqlServer Express. Or there any alternatives?
thanks,
Henk
View 7 Replies
View Related
Jun 15, 2007
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies
View Related
Sep 13, 2007
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies
View Related
Jan 17, 2002
Hi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
View 1 Replies
View Related
Aug 22, 2007
Hello,
I have this problem on a Production database.
DBCC OPENTRAN shows "REPLICATION" on a server that is not configured for replication. The transaction log is almost as large as the database (40GB) with a Simple recovery model. I would like to find out how the log can be truncated in such a situation.
Thank you.
View 4 Replies
View Related
Mar 6, 2007
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Jul 28, 2006
Hi,
I have a VB.net app that access a SQL Express database. I have transactional repliaction set up on a SQL 2000 database (the publisher) and a pull subscription from the VB.net app. I use RMO in the VB app to connect to the publisher. My problem is I am getting some strange behaviour as follows
- if I run the app and invoke the pull subscription it works fine. If I then close my app and go back in, I can access my data without any problem
- If I run the app and try to access data in my SQL Express database it works fine. I can then close the app, reopen it and run the pull subscription it works fine
however.......
- if I run the app, invoke the pull subscription (which runs fine), and then try to access data in my local SQL Express database without firstly closing and reopening the app, I get a login error
- if I run the app, try to access data in my local SQL Express database (which works fine), and then try to run the pull subscription I get a "the process cannot acces the file as it is being used by another process" error. In this case I need to restart the SQL Express service to be able to run replication again.
I get exactly the same behaviour when I use the Windows Sync tool (with my app open at the same time) instead of my RMO code to replicate the data.
I am using standard ADO.Net 2 code to access my SQL Express data in the app and closing all connections etc
Any advice appreciated !
Thanks
Ronan
View 2 Replies
View Related
Jun 28, 2007
Hi all,
I have recently setup a transactional replication in MS SQL 2000. After setting up the replication the clients TempDB grew by almost 60GB. Now the client is Blaming me for the TempDB GROWTH and saying that its because of the replication being setup i tried to convince them but they are not satisfied yet. Can anybody please tell me does replication cause the tempdb to grow. If yes then how. can u suggest any good link for getting to know the internal working of SQL Server replication????
Thanks in advance
Jacx
View 3 Replies
View Related
Aug 30, 2007
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
View 3 Replies
View Related
Sep 2, 2015
I have been researching on the proper steps or sequence to follow to completely remove SQL Server 2012 Transactional Replication. Â I have read articles about using SSMS as well as using replication stored procedures and some procedures use SQLCMD or just regular TSQL executed in SSMS. Â I have also read articles where people said all you really need is connect to the Publisher instance, find the publication you want to remove and choose "Delete" and everything will be taken care of behind the scene. I have three SQL servers that participate in transactional replication. Â SQL-P (publisher),Â
SQL-D (distributor) and SQL-S (subscriber). Â Do I need to connect to the distributor instance and the subscriber instance when removing transactional replication or is it just really connecting to the publisher and click delete on the publication? I want everything gone including any metadata, systems tables, distributions db and any other replication objects created during the initial configuration.
View 6 Replies
View Related
May 9, 2006
Hi every body,
I have SQLServer 2005 runs well for months and stop working after install SqlServer2005 SP1. I try to reinstall the SQLServer 2005 but I have problem when install work station component on my and the error is "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor". Please help me to fix this bug. I do not want to reformat my machine.
John Dang
View 1 Replies
View Related
Apr 17, 2007
Hello everyone,I am involved in a scenario where there is a huge (SQL Server 2005)production database containing tables that are updated multiple timesper second. End-user reports need to be generated against the data inthis database, and so the powers-that-be came to the conclusion that areporting database is necessary in order to offload report processingfrom production; of course, this means that data will have to bereplicated to the reporting database. However, we do not need all ofthe data in the production database, and perhaps a filtering criteriacan be established where only certain rows are replicated over to thereporting database as they're inserted (and possibly updated/deleted).The current though process is that the programmers designing thequeries/reports will know exactly what data they need from productionand be able to modify the replication criteria as needed. For example,programmer A might write a report where the data he needs can beexpressed in a simple replication criteria for table T where column X= "WOOD" and column Y = "MAHOGANY". Programmer B might come along amonth later and write a report whose relies on the same table T wherecolumn X = "METAL" and column Z in (12, 24, 36). Programmer B willhave to modify Programmer A's replication criteria in such a way as toaccomodate both reports, in this case something like "Copy rows fromtable T where (col X = "WOOD" and col Y = "MAHOGANY") or (col X ="METAL" and col Z in (12, 24, 36))". The example I gave is reallytrivial of course but is sufficient to give you an idea of what thecurrent thought-process is.I assume that this is a requirement that many of you may haveencountered in the past and I am wondering what solutions you wereable to come up with. Personally, I believe that the above method isprone to error (in this case the use of triggers to specifyreplication criteria) and I'd much rather use replication services tocopy tables in their entirety. However, this does not seem to be anoption in my case due to the sheer size of certain tables. Is thereanything out there that performs replication based on complexprogrammer defined criteria? Are triggers a viable alternative? Anyalternative out-of-the-box solutions?Any feedback would be appreciated.Regards!Anthony
View 11 Replies
View Related
Oct 9, 2007
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example...
Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
thanks...
View 5 Replies
View Related
Nov 9, 2006
I have a wired situation..!I set up transactional replication on one of my development server (SQL2000 Dev Edition with sp4).It is running fine without any issues and all of a sudden, i noticed inmy repication monitor tab under Publisher where I usually see thepublication is empty now.I do see the snapshot agent, log reader and distribution agent under myagents inside the replication Monitor. But its usefull to see all 3agents in one window under publisher before. What happend? Is there anyway to get that inside that monitor? Has someone encountered thissitation before? Please advise....After that I tried to create a new set of replication on differentdatabase on the same server and i dont see those either underReplication Monitor - Publishers....All it says is (No Items)....I would appreciate any help to correct this issue... Thanks in advance..
View 2 Replies
View Related
Jan 30, 2007
I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.
Everyone known how to fix this problem?
Thanks,
Frank
View 1 Replies
View Related
Apr 24, 2007
Hi,
I have a particularly difficult problem.
I have a SQL Server in an internal network and need to "replicate" to an identical server and database in a DMZ. The DMZ can only receive files sent by a custom component and no port(s) can be opened in the firewall or standard FTP used.
I also need to minimise traffic (i.e. sending whole tables is not an issue as some contain millions of rows), replicate approx once hourly and allow record locking only (as opposed to DB locking/exclsuive access or table locking).
Any thoughts / experiences greatly appreciated otherwise I'm looking at putting triggers on all the tables to monitor changes and generate SQL statements for execution against the DMZ server.
View 4 Replies
View Related
