I have Windows 98
I had MSsql 7 installed and suddenly 3 days back I got error openconnection failed.
I reinstalled MSSql 7.0 in my machine now I have different problem
while installing when it comes to starting service it gets hang up for very long time and finally it says
Setup failed to configure the server. Refer to the server error
logs and cnfgsvr.out for more information
cnfgsvr.out file looks like this
Starting Service ...
An error occurred while attempting to start the service (1460)
SQL Server configuration failed.
can anyone figure out why sqlserver 7 cannot be started and it
remedy and send me solution to overcome
Thanks
hi myself avii am developing one appilication in which i am using vb as front end andsql server 7.0 as backend. i all ready complete the full application andit installed it on my clients computer. but some times i need my clientsdata which is on his computer,so any one can help me to find out how do i connect to my clients sqlserver through internet i. e. how do i configure or use server networkutility / Client network utility. i need it very badly.plz help methose who r giving me their valuable help plz mentioned their email id sothat i can contact further
I try to install SQL Server 2000 SP3 on my Windows XP server.
During the installation, the setup process inform me database services can't be install on my machine. I can only install client tools.
It seems to success, but when I try to connect register a new database in the Enterprise Manager tool, connection to my server databases always fail with error: "waiting time expire"
If I try to connect to the same database with the Querty Analyzer it works.
How can I solve this problem ? His there a patch ?
I'm sort of newbie in sql server, so don't mind for confusion.
I installed SQL Server 2005 Express edition with Advanced Services. During Setup I have choosen to use Windows authentication for connecting to my server, cause I read it can be removed in SQL Server Management Studio (right-click on server, Properties, Security, SQL Authentication).
Few days ago I got some mdf database to attach to my server, but in readme file in the same folder, there was a message to create new user called 'Bob' (password 'msdn') with dbo permission to that database (with SQL Authentication mode access to server). I did so, created user, went to Server Properties, changed mode for Authentication), disconnect from server, and closed Management Studio. When I opened it again I clicked on SQL Authentication to connect, typed Bob as user name, msdn as password, and I got a message which was something about that it is not possible to connect with SQL Server Authentication mode, although I made a difference in Properties.
Should I install SQL Server with the new instance and with SQL Authentication mode?
I am having trouble installing SQL 7.0 beta 3 on my home PC running Windows 98. The setup process fails in the last stage when it attempts to start the server. The one thing missing on my PC is it still doesn`t have any TCP/IP address; does it matter? I have also noticed that when I run the setup, it doesn`t recognize Named pipe protocol. Have anybody had similar problem?
Any help is greatly appreciated. Thank you. -Manoj
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance.
INSTANCEID="SHAREPOINT"
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books online, Business Intelligence Development Studio, and other shared components.
FEATURES=SQLENGINE,REPLICATION
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Setup will not display any user interface.
QUIET="True"
; Setup will display progress only without any user interaction.
QUIETSIMPLE="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; The directory for the extracted service pack files used to update the setup media.
PCUSOURCE="d:d8ad8f24d77c0777a5PCUSOURCE"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; Specify the root installation directory for native shared components.
What are the guidelines for installing the SQL Software? Is it bottleneck if both Windows and SQL software are installed on the same drive ( I have all the database .mdfs and and .ldfs on a seperate RAID array)?
i have a windows 2003 server up and running and a client workstation connected via a crossoever cable. they both can ping each other.
my next step, i would like to replicate a "real world" scenario where i have the database engine and the sample databases on the server and i would like to be able to write to and from the cleint to main database which is going to be on the server.
so my question is, do i need a full install on both machines?
please let me know how to refer to a row from a set of duplicated rows of a sql server database table.there are no primary keys/constraints in the table so as to refer it.Is there any thing like 'rowid' which we have in oracle?
I try to install MSDE as a new instance (SQL2) on my computer with Windows 2000 Professional, but a problem occurs and instalaltion does not complete successfully. I am an administrator of the computer. The application log contains the following errors descriptions: "The SYSTEMCurrentControlSetServicesMSSQL$SQL2Perfo rmance key could not be opened or accessed in order to install counter strings.The Win32 status returned by the call is in the Record Data as DWORD 0. " and "Installing the performance counter strings for MSSQL$SQL2 failed. The Error code is DWORD 0 of the Record Data. "
I am trying to install SQL Express on Window Home XP and SCC is returning the following error:
The SQL Server Configuration Checker cannot b execute due to WMI configuration on the machine ..... Error 2147942405 (0X80070005).
I tried running the following batch file which I believe resolved the same issue that someone else raised earlier (though I am not sure whether the OS was Home XP)
Will upgrading from XP Home to XP Professional (academic version) help me install SQL express successfully>
The Batch file I ran looks like this:
FIXWMI.CMD ------------------------
@echo on cd /d c: emp if not exist %windir%system32wbem goto TryInstall cd /d %windir%system32wbem net stop winmgmt winmgmt /kill if exist Rep_bak rd Rep_bak /s /q rename Repository Rep_bak for %%i in (*.dll) do RegSvr32 -s %%i for %%i in (*.exe) do call :FixSrv %%i for %%i in (*.mof,*.mfl) do Mofcomp %%i net start winmgmt goto End
:FixSrv if /I (%1) == (wbemcntl.exe) goto SkipSrv if /I (%1) == (wbemtest.exe) goto SkipSrv if /I (%1) == (mofcomp.exe) goto SkipSrv %1 /RegServer
:SkipSrv goto End
:TryInstall if not exist wmicore.exe goto End wmicore /s net start winmgmt :End
Installation of MSDE 2000 fails on 64-bit Windows Vista (Build 5308).
The error message is "Setup failed to configure the server.Please refer the error logs for more information". No error log can be found on the machine at the time of installation. Please let me know if anyone else has encountered this problem?
Is it possible to install MSDE 2000 on 64-bit Windows Vista(Build 5308)?
i have installated on my computer ms sqlserver 7 .I want to try sometransactions.Is it possible to connect as 2 or tree users just to simulateworking with many users?
Hi, i tried to install SQL Server 2000 Developer and MSDE the whole day on my Windows XP SP2. MDAC is the latest, that come with WinXP SP2 (2.81). The installation fails at the end after 100% complete.
It says: Translated: "the setup programm starts the server and installs the configuration you chose..." ("das setup-programm startet den server und installiert die von ihnen gewählte konfiguration...")
then it takes some time and the failure appears, saying: "the setup programm could not configure the server. you can find more information in the server-failure-log files and in "C:windowssqlstp.log."
I have a Windows 2003 Enterprise x64 edition cluster setup and functioning normally. Now, I am trying to get SQL Server 2000 installed as a failover cluster but am having some difficulty. When installing, I get the message '[sqsrvres] ODBC sqldriverconnect failed' in the event log. The message happens when the installer is trying to bring the SQL Server Service resource online.
I am able to ping the name of the instance successfully. I am able to manually start the 'MSSQL$InstanceName' service. I have turned off the firewall on both machines, but this did not help. I have the DTC Service setup as a resource in the same cluster group.
I also read http://support.microsoft.com/default.aspx?scid=kb;en-us;815431 which seemed promising, but did not reolve the problem.
I am trying to install SQL Server 2005 on Windows Vista Home Premium edition, when I run the Installer I received are the following error message.
IIS Feature Requirement (Warning)
Messages
IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
I already configure IIS7 with all feature, but system still generate above mentioned message.
hi we are taking incremental backup daily on sqlserver computer.we are using seagate backupexec ,suddenly the back up of database files skipped . saying
the itemMssql7datamaster.mdf in use -skipped ..................................... ...................................
normally we shedule this backup at midnight ,i am sure that no body is using sqlserver ..
does any body know the reasony why it is skipping ,and how to solve this problem.
hi we are taking incremental backup daily on sqlserver computer.we are using seagate backupexec ,suddenly the back up of database files skipped . saying
the itemMssql7datamaster.mdf in use -skipped ..................................... ...................................
normally we shedule this backup at midnight ,i am sure that no body is using sqlserver ..
does any body know the reasony why it is skipping ,and how to solve this problem.
Hello,I am trying to recover a SQL Server 7 database from another hard diskdrive that has a corrupted Windows 2000 Advanced Server installation. Iam not able to repair the corrupted Windows 2000 Advanced Serverinstallation but the file system is intact. I have installed a new copyof SQL Server 7 onto a new hard disk and have used the sp_attach_dbsystem stored procedure to attach the database from the old hard driveinto the new installation of SQL Server 7 on the new hard drive. Thedatabase shows up in the Enterprise Manager View and all the data andstructure are there, but when I try to run a Web site that uses ODBCconnections to the database I get the following error:ODBC Error Code = 08001 (Unable to connect to data source)[Microsoft][ODBC SQL Server Driver][Named Pipes]Specified SQL servernot found.I have double-checked that all the NTFS permissions, ODBC DSNs, and WebServer settings are correct and when I run the SQL Server ODBC drivertest at the completion of each ODBC DSN setup, it is successfull.1) Why am I getting this ODBC error?2) What steps have I missed in the recovery process?3) If I have done something wrong recovering my database, can I stillrecover it since I still have: a) The old master database file and logfile; b) The old database (non-master) file and log file; c)A backed-up(Enterprise Manager -> Right Click A Database -> All Tasks -> BackupDatabase) copy of the old database (non-master) file; ?My System Specifications:-Windows 2000 Advanced Server-SQL Server 7-IIS 5.0-Cold Fusion Server 4.5 Professional Full EditionThanks For Your Time,Nathan
We deploy an application that uses SQL Server Express 2005. One of our test engineers tried to use our setup on Windows XP SP 3. But the SQL server installer gave an error - unable to update msxml6r.dll. Is this a bug of the SQL Server installer or do we need to make use of a more recent version of msxml6?
I need a hand here, referring to this knowledge base on Microsoft (http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811) i applied this knowledge base, and it worked, the MSSQL and SQLSERVERAGENT have run under local non admin account.
But after i installed SP1, MSSQL service is ok, but SQLSERVERAGENT wont run. The warning message is : "Some service run and then stop if they have no work to do."
Is there any way i can install SP1 but in the same time run SQLSERVERAGENT under local non admin account?
I recently installed an evaluation copy of SQL Server 2005 Enterprise Edition on my local machine and during the installation I used Local System system account for the SQL Server service and set the server to use Mixed Mode authentication.
I am able to connect to this local server Database Engine with my Windows login through SQL Server Management Studio and am able to perform sysadmin tasks. My question is why?
My thinking was that even though my Windows login would provide me a connection to the server, I would still have to manually add this login to the sysadmin server roles but after checking the sysadmin role, my Windows login isn't in there. The Windows login is not found under Security - Logins in SSMS either.
Can someone tell me should details for the login be visible on the server and why it seems to have sysadmin permissions ?
I have been through virtually every last posting on installing SQL Server Express with Advanced Services in this site and still have no success accessing the Reporting Services site: http://localhost.reports$sqlexpress. I get a the correct background to the site as in the tutorials, but only get "ERROR - unable to connect to the remote server", which may be indicative because this is all installed on my local machine (Dell AMD Athlon 64 X2 Dual Core 4000+ 2.11 Ghz, 1GB, Windows Ultimate). I have gone through How to install ... on a Windows Vista-based computer, KB934164, and most recently, How to configure .. to allow remote connections, kb 914277, in hopes of addressing the "remote server" issue. I still can't get past this obstacle. PLEASE HELP!! :-)
I found sql2005 Enterprise cannot be installed under Simplied Chinese win 2003, the only thing i suspect is that win2003 is an envaluation copy with netframework 2.0 be installed.
I am trying to install SQL Server 2005 Standard on my laptop, which has Windows XP Professional with Service Pack 2. I could not able to install properly and i am getting error always. i tried whatever the people mentioned in Google, but I could not able to fix the problem. please some one can help my problem.
Here is the Error I am getting always "The certificate chain was issued by an authority that is not trusted" . I am trying for past few days i could not able to resolve.
please help
Note : I have SQL Server 2000 Client installed in my laptop. this is my development machine
Thanks
Paddy
Here is the Error message from Summary.txt
Product : SQL Server Database Services Error : SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
-------------------------------------------------------------------------------- Machine : W4102762 Product : Microsoft SQL Server 2005 Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_w4102762_SQL.log Last Action : InstallFinalize Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted. Error Number : 29515 -------------------------------------------------------------------------------- Machine : W4102762 Product : SQLXML4 Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_w4102762_SQLXML4_1.log --------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Hello,I received the error message below when i'm trying to install SQLServer 2000 standard edition into a Windows 2000 Professionaleworkstation.Error :Microsoft SQL server 2000 Standard Edition server components is notsupported on this operating system. Only client components will beavailable for installation.Any request modification ?Best regards,Thanks
i am facing problem in the installation of SQL Server 2005. I am installing sql server 2005 on Windows Server 2003 with SP1. When I start the setup error occurs. It says, Microsoft Windows Installer 3.0 is not installed. I think Windows Installer comes with windows server 2003. what should i do now..
I am trying to install microsoft sql server 2000 enterprise edition on a windows 2000 advance server. I keep getting error message
A previous program installation created pending file operations on the installation machine. You must restart the computer before running . I have restarted machine and no change.
What does error message mean and what is solution?
