I have a Stacked Column graph and when we set the Position of the Point Label to be "Top Center", the Point Label always stays in the center of that particular Bar.
On a easier, basic Bar chart, the Point Label setting works correctly.
Has anyone else had a similar issue or know if this is a known issue ?
Hi,
I need to label stacked bar /column charts with the percentage of each series at each axis point.
For example, if I have the following values in the chart:
Series 1 Series 2
Axis point 1 50 25
Axis point 2 12 12
I need the labels to read: Series 1 Series 2
Axis point 1 67% 33%
Axis point 2 50% 50%
It would seem that I need to format the data point labels to read something like: sum (data.label)/sum(data.label, "axis point")
Any ideas would be appreciated. Thanks in advance for your elegant solutions
Hi All,
I am working on a column chart type (stacked column sub-type) report.
Our customer requires us that the space(padding) between the columns should be a constant(including the space between the Y-axis and the first column). I know how to set the width of the columns, but I really don't know how to set the width of the space between them. The columns just varies the space between them automatically according to the number of the columns (the number of the columns is not certain).
Thanks a lot in advance!
Danny
I need to generate weekly report for data usage for my c drive and d drive.the graph should be likefor a particuluar date, I want to display graph like this. even if I change secondary axis, my c: drive used and free space not coming in single column. it comes like c: drive used space, on top of it d: drive used space and in adjacent column c: drive free space, on top of it d: drive free space.I don't want to add two category one for date and another for driver names.
View 6 Replies View RelatedI have another query regarding the graph/chart that i made in report builder. May i know on how to lessen the space between a column in my stacked bart chart.
View 5 Replies View RelatedI have an existing stacked chart with line graph as secondary. the value of line graph is finished good qty. now i need to removed the finished good and change it with a target line chart. May i know on how to work change this to line. The target value is 68%.
Rec MonthQty ReceivedFinished GoodScrapWIPFG %ScrapWIP %
Jan-20151181336215754353162352.6%46.0%1.4.%
Feb-2015843174884434083139057.9%40.4%1.6.%
Mar-20151115357179537993174764.4%34.1%1.6.%
Apr-20151315319378536096165071.3%27.4%1.3.%
May-20151205567891836410522865.5%30.2%4.3.%
[code]...
I have a report in which I have assigned custom colors with a function to one of my stacked column charts. When I run it in the report builder, the colors are correctly placed, but as soon as I upload the report to the server and view the report from there, the colors get swapped. I have these custom colors applied to other stacked column charts in the report and they work perfectly fine. The only difference between this chart and my other charts is that it contains two category groups.
EDIT: Alright, I have gotten it to display the correct colors by using a function with the colors I wanted in reverse. I have two values, "Upcoming" which is displayed in red, and "Outstanding" which is displayed in blue. If the chart has only upcoming values, it will display in blue rather than red, whereas if I have upcoming and outstanding values, they will display in their correct colors. why this is occurring?
I have a simple column chart with point labels. The values are displaying at a -90 angle. I want the values to display in the center of the column, but when I choose the center position, it is displaying at the top; half of the value is in the bar and the other half above. Why?
View 2 Replies View RelatedI am trying to develop a report that will show a 100% stacked bar graph for many teachers. Each teacher will have there own graph. The series in the report are the percent of scores given on a test, with each test in a group. Scores are given on a scale of 1-4. Most of the time a teacher will have all fours scores in there data; however it is possible to only have 2 or 3 of the scores. How can I set the legend up so that all scores across all the graphs show the same color for the same data series? Right now I get something like this.
First Graph
4: Lime
3: Purple
2: Blue
1: Green
Second Graph (no values for 1 or 2)
4: Blue
3: Green
I need the second graph to be
4: Lime
3: Purple
I have a stacked bar chart which i notice a vertical line char. how can i removed this vertical line? I already modified the properties under smart labels under calloutlineanchor, calloutlinestyle, calloutstyle to None but still getting this vertical lines. another things is the data label as you can see in the the first column the 1.8% should be place under the gray color but its already shown before the orange color.
View 3 Replies View RelatedI am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies View RelatedData lables in ssrs reports are getting overlapped in stacked chart. Since it is satcked chart i can't place labels outside the bar.Due to this it is not visible clearly. how to avoid this issue?
View 7 Replies View RelatedI'm just getting into creating charts and one I'm working on could realy do with a prefix on its axis label, the symbol '£'.
I honestly have no idea how to do this and what syntax to use, can anyone help ?.
Also as the label could do with having a thousands seperator as well but as you can tell I'd have no idea how to do this either.
Thanks.
Hello,
I have a Chart with one series as values.
The chart is good and I can see the series label in the corner.
I can hide it by uncheck the "show legend.
Now I added another value to my chart and got another series label.
Is there a way to hide only one label?
If I use =" " in the "series label" of that data then the label its self is hidden but the label mark is still visible.
Thanks.
Is there a way to adjust the orientation of the grouping labels (x-axis) of a bar chart in a report. So instead of displaying the grouping label text horizontally I want to display the text vertically? Is there any way to access the chart object and code this in the report from properties ->code tab? Any suggestions?
View 1 Replies View RelatedI have pie chart. In this i have to display the category group name , count as a data label. In this both category name and count should be in seperate line and should be in centre allignment. But for it is not centre allignment. In series label properties i am using this expression,=Fields!Group.Value & VbCrLf & Count(Fields!Countvalue.Value).I am geeting new line. But not in center allignment.
View 2 Replies View RelatedIn my Chart I have to keep the angel of the category field fix to 90 degree. When I do this the format of the Label does not look quite right.
I expect Below : I can work Out dd and mm positions ..what I am concerned about the date direction because of which its not quite readable.
I have tried many format in label format but it is not giving expected result.
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
Set the Maximum = Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
I've a stacked column chart (vertical) both with positive and negative value.
I want an horizontal line only for the value = 0.
I tried to add a serie and to plot it as line, but I see it in the legend and I don't want to see it.
Can I show the gridlines only for the value 0?
Simona
I'm making some reports that are made for getting printed. I currently have three groups of reports, each group having four charts (four A4 papers/group). To cut down on the sheer number of papers on the boards I've been asked to merge these charts so that we'll have all three groups in one chart. This works fine for three of the charts (two line charts and one column chart), where the results gets neatly organized in group order. Where I ran into problems was the last chart..
The last chart is a stacked column chart. With one group, it works quite well; the x-axis is by year/week, and for each week there's a bar where the lower part is "done" and the upper part is "failed".
Now when doing this graph with multiple groups (groups as series), it doesn't put the different groups beside each other as I would've wished, instead it piles them on top of each other as if it was a 100% stacked column.
So the question is; is there some way to make a stacked column graph with multiple series that are one stacked bar per group instead of having all of them stacked on top of each other? Am I just missing some small detail here?
Is there a way to get markers on the top of each graph of a stacked column chart?
Also i need to display a label when the mouse points over each of the marker, as well as each partition of the graph. Getting the tooltips to work might b a help but it is not working for me. I got a reply that enabling the mouse over in the report viewer might help, but i dont know how to enable
I have a stacked column with 2 series("phones", "no phones") on the categories, What I am trying to do is to show only one of the series in each category,I used the visibility option in the series properties, and chose show or hide based on an expression using the expression below if(Fields!PENETRATIONSERIES. Value="no phone",FALSE,TRUE) i get no graph , But when I switch the true and false value, the graph show with the two series there.
View 3 Replies View Related There are about 500 tables in one particular datbase. There are
foreign keys set on most of the tables. I want to change the position
of the primary key column in all those tables. How can I do that
programatically?
HI All,
can we interchange the column position in sql.
What is a good method/mechanism to swap the position of multiplecolumns?For instance, tblXZY has the followings columns and respectivepositions:tblXZY======xyzUUID 1fn 2ln 3phone 4email 5city 6state 7....Now, I need to make city as 2 and state as 3. BTW, the tblXYZ tablehas data there. Copy/select all the data into a new table withdesired column position would require constraints re-mapping etc.,which seems quite a bit hassle.Thanks.
View 6 Replies View RelatedWhat is the SQL for adding a column at specific location?
eg
TableA
colA
colB
I want to add colC after colA.
Thanks,
Max
I created SQL table follow by XSD fileAnd when any users added new column to XSD in ordinal position = 3 But after my program successfully created new column, its position is the last position What can I do ???? I suspect why I can't set it (I've looked for solution on MSDN already)even though We can see ordinal position bythis query SELECT *FROM INFORMATION_SCHEMA.Columns What can I do for solving ???? Help me please
View 1 Replies View RelatedWe have a little app to help us move applications from developent --> stage --> production. It uploads the files, runs the new stored procedures etc.
One of the things it does is create new columns in existing tables. In EM you can create a new column in any position, but ALTER TABLE seems to only add columns to the end of the table. Is there a way in TSQL to create columns in arbitrary positions in the table? Or do I have to recreate the whole table?
1 have a table with 74 colun.But due to some deletion i have the ordinal postions as
1
2
3
.
.
69
70
72
73
74
76
what i wants is to change the ordinal from 72 to 71,73 to 72,74 to 73,76 to 74
SELECT @field = 0, @maxfield = max(ORDINAL_POSITION) FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = @TableName
-- handle insert case here
SELECT @field = min(ORDINAL_POSITION) FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = @TableName and ORDINAL_POSITION > @field
SELECT @bit = (@field - 1 )% 8 + 1
SELECT @bit = power(2,@bit - 1)
SELECT @char = ((@field - 1) / 8) + 1
--IF substring(COLUMNS_UPDATED(),@char, 1) & @bit > 0 or @Type in ('I','D')
IF substring(COLUMNS_UPDATED(),@char, 1) & @bit > 0 or @Type in ('D') -- For the insertion case don't save the iserted data.
I needed it as i have a trigger whihc is adding value in a log table on update but due to this problem it fails for certain column
Trgger is solme thing like
WHILE @field < @maxfield
BEGIN
SELECT @field = min(ORDINAL_POSITION) FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = @TableName and ORDINAL_POSITION > @field
SELECT @bit = (@field - 1 )% 8 + 1
SELECT @bit = power(2,@bit - 1)
SELECT @char = ((@field - 1) / 8) + 1
--IF substring(COLUMNS_UPDATED(),@char, 1) & @bit > 0 or @Type in ('I','D')
IF substring(COLUMNS_UPDATED(),@char, 1) & @bit > 0 or @Type in ('D') -- For the insertion case don't save the iserted data.
BEGIN
IF @Type not in ('I')
BEGIN
SELECT @fieldname = COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = @TableName and ORDINAL_POSITION = @field -1
--print('fieldname = '+@fieldname)
SELECT @sql = 'insert Audit (ActionTypeID, RowID, TableName, PK, FieldName, OldValue, NewValue, UpdateDate,UserID, UserName, UserType)'
SELECT @sql = @sql + ' select convert(bigint,' + @ActionTypeID + ')'
SELECT @sql = @sql + ',' + @RowID
SELECT @sql = @sql + ',''' + @TableName + ''''
SELECT @sql = @sql + ',' + @PKSelect
SELECT @sql = @sql + ',''' + @fieldname + ''''
SELECT @sql = @sql + ',convert(varchar(1000),d.' + @fieldname + ')'
SELECT @sql = @sql + ',convert(varchar(1000),i.' + @fieldname + ')'
SELECT @sql = @sql + ',''' + @UpdateDate + ''''
SELECT @sql = @sql + ',' + @UserID
SELECT @sql = @sql + ',''' + @UserName + ''''
SELECT @sql = @sql + ',''' + @UserType + ''''
SELECT @sql = @sql + ' from #ins i full outer join #del d'
SELECT @sql = @sql + @PKCols
SELECT @sql = @sql + ' where i.' + @fieldname + ' <> d.' + @fieldname
SELECT @sql = @sql + ' or (i.' + @fieldname + ' is null and d.' + @fieldname + ' is not null)'
SELECT @sql = @sql + ' or (i.' + @fieldname + ' is not null and d.' + @fieldname + ' is null)'
--print('@sq=====sdfdfsfsdf')--sha
--print(@sql)--sha
EXEC (@sql)
END
END
END
Kamran Shahid
Sr. Software Engineer(MCSD.Net)
www.netprosys.com
Is there any way to select columns by ordinal position rather than by name?
Something like
Select t.[1] as col1, t.[2] as col2
FROM table t
The question comes because of a very specific situation where I've got 2 databases that have exactly the same schema at a column/datatype level but the column names are different. There are a few other ways to skin the cat but I'm interested if it can be done this way - without a join to syscolumns.
Hello!
Is there a function that gets the name of a column and a string as arguments and returns the position of this string in the column given?
Thank you in advance.
I currently have this statement:
CASE WHEN DATEDIFF([MONTH], ih.SOTransDate, GetDate()) = 11 THEN id.SOExtChargeAmount ELSE 0 END AS MonthLessEleven,
I would like to return however instead of column name 'MonthLessEleven' the actual month and year that is -11 from getdate().
I've tried the month(dateadd("m',-11, getdate())
but it returns syntax errors. I'm doing this in Visual Studio. Could anyone help me out? Thanks.
Hi
I am having a problem in auditing the column data in tables.My requirement is i have write a trigger which is capable of auditing the columns which are going to be added in the future also with out using dynamic SQL.is there any way to do so.
I feel if i can get the column data based on ordinal position then it is possible.
Can any body suggest.
My set Up is like this
I have a base_table to be audited.
I have a Audit_spec table which contains name of the table and columns to be audited.
And Audit table which actually captures the table name,column name ,old value and new value.
I have to audit only those columns in the Audit_spec spec.
If schema changes(Like new column added) happens to base_table and I want that column to be audited.with out any changes to my trigger code i should handle the newly added column ..