Yesterday I asked question to make a copy of the server but actually I want to make a Standalone server 6.5.
Please Advise.
How to create the DB and How to restore. Even I want to restore master but for restoring master how to start sql server in single user mode. If any body has document please post me.
Thank you very much!!!!!!!!!
Joe
I have a need to demonstrate an application I built in ASP.NET with SQL Server as the back-end database. The problem is when I don't have a network connection, I get an exception thrown..."SQL Server does not exist or access denied." This is the connection string I use (via ASP.NET/ADO.NET): "server=localhost; uid=xxxx; pwd=xxxx; database=mydb"
I've tried Query Analyzer and it too, doesn't work - I get an error message that reads: "[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied." However, via SQL Server Enterprise Manager, I can connect and do what I want to the database.
As soon as I connect my laptop to any network, the web application works fine (no errors), as well as the Query Analyzer.
Any insights are greatly appreciated. Thanks.
Here is my Question...
I have 3 server hardware and the whole purpose is to make one as a web server and another one a SQL server. The purpose of the 3rd server is purely a backup server, what that means is, in case if my web server nor my database server fails, I should be able to use the 3rd server as a backup. How do I achive this without using MS cluster service.
I can use NLB for Web, but what about SQL server ??
All I need to know is ,other than MS cluster service, is there any way I can create a backup SQL database server ( secondary database server) in case the primary fails with very minimal down time? I need my secondary ( backup) server up and running when the primary fails. I don't want to use Cluster service because of the cost for storage and license.
Any idea will be welcomed. I could have used the datamirroring option of the 2005 , but this is for a production deployment and is not recomended by microsoft. also, restore the backup from primary and make it work is not welcomed.
Thanks
Plakeezhu.
Hi,
I am developing a web project in VS 2005 Professional.
The site will be hosted on a machince that does not have an instance of Sql Server Express. Can I still use the standalone sql database file (.mdf) file? Are there drivers in ASP.NET that allow this or do I have to ask that an instance of either Sql Server or Sql Server Express be installed?
Thanks, Mike
Can someone please tell me if i can use SQL Server 2005 on my standalone laptop, and how do i connect, i dont know how to set up the password so i can connect
Many thanks Rob
Please could anyone tell me what are the real differences between SQL Server 2005 bundled along with Visual Studio.NET and a standalone one.
Thanks in advance.
I have attached the SAN, configured the Windows Clustering and I'm ready for SQL. SQL Server 2005 was already on this machine as a stand alone. I removed all of the software and I'm reinstalling SQL. The cluster option is not enabled. Any ideas why?
View 1 Replies View RelatedI have never installed sql server before and I didnt know if I just take the sql server 2005 standard edition media and boot off it and do a fresh install that way or do I have to install Windows server
View 3 Replies View RelatedI have a vbs script to try to prove that I can perform vbs scripting in either a job step or a dts package
The script is
dim rs, sql,adoconn, adocommand, dataconnstring
set adoconn = createObject("ADODB.CONNECTION")
Set rs = CreateObject("ADODB.Recordset")
set adocommand = CreateObject("ADODB.Command")
adoconn.ConnectionString = "Provider=SQLOLEDB;Server=myserver;Database=pubs;U id=myuser;Pwd=mypass;"
adoconn.Open
sql = "select * from import"
rs.Open sql, adoconn,adOpenForwardOnly
while rs.EOF = false
sql = "insert into zz default values"
adocommand.ActiveConnection = adoconn
adocommand.CommandText = sql
adocommand.Execute
rs.MoveNext
wend
rs.Close
adoconn.Close
set adoconn = nothing
However,
when I run this from windows explorer it works fine,
but when I try to run it as an activeX script, I get the error ActiveX scripting: Function not found
As a cmdexec step in a job, I use the line c:inetpubwwwrootvbsvbstest1.vbs
It failed with the error
The process could not be created for step 1 of job 0x119BDBD264AD9B4597A9302786F0E250 (reason: %1 is not a valid Win32 application). The step failed.
What is wrong with the vbs script ?, or do I need to invoke it a different way ?
thanks in advance
I have an issue with the BCP util, it is extremely slow when running a BCP in to the same database on an A/P cluster vs. Standalone system. It is a vendor application, so I have little control as to what I can do. The BCP runs from a jobserver (remote) through the network, but it runs the same way in the standalone system, yet the process is about 10X as slow with the cluster, and the only diff is cluster vs. standalone.
SQLClusterName is specified in -S, not the active node, and it uses a trusted connection, not a local account. Is there anything about a cluster config that would cause the BCP to run slower ?
Any thoughts ??
Thanks,
Paul
I have installed SQL Server 2005 on my laptop that has Vista OS.
I want to log on only to teach myself. Is there a way that i could use the program without having to set it up on a server.
Hello,
i am planning to build Pocket Pc App and i would like to know if i can use Sql Mobile as my data store. The data base design is quite complex.
I wont be using any recplication/synchronization in my app since its a standalone app.
pls suggest.
Thanks
Karthik
Is it possible to run SQL Server Compact Edition as a standalone application from a DVD?
i.e. it would not leave anything installed on the users computer after the DVD was ejected.
Hey guys,
I'm really new to this so this might look dumb, but I need to know what all has to be done to develop a standalone database application.....The frontend is going to be on VC++...which are the best tools I'll need to use. I need to know if the user has to install the database app to use the program to make this possible......Also will he have to keep it running everytime to use the program.
Thanks a lot for you time and patience,
Dhaval
I've just spent the most frustrating 4 hours trying to install SP2.
I kept getting "unable to start SQL Server service....see BOL ...re starting the service manually" messages; with the only options being to Retry or Cancel. Retry resulted in the same message. Cancel resulted in all components except SQL (sqlexpress) being installed - therefore totally useless
No mater what I did i could start the SQLservice as it did'nt show in the list of Services; nor did the SQL EE programme show in the Add/Remove Programs...evenn though the other components did.
I deleted/removed everything that was istalled; cleaned up the Registry; and tried again...
..and again
..and again
FIVE install / re-install failures; numerous registry cleanups!!!!
I was at the point where it looked like i'd have to reformat my hard disk, and completely re-install XP, all aplications i.e. Office 2003 etc in order for the thing to work.
I gave it one more shot, but this time, during install
- selected all components except SDK
- I unchecked the Start SQL / BROWSER at startup
- Checked the Enable User Instances and Add to Administrators boxes
Lo and behold....it installed!!!
I'm still very worried as the registry is full of "duplicate" entries i.e. Blah blah blah and blah blah blah.1
But at least the thing is installed.
Would interested to hear if anyone has had similar or other problems with the SP2 install/upgrade
----------------------
For info:
I ran the install as Administrator
IIS not installed
Win XP Sp2 fully updated
Dell Inspiron XPS M1710 laptop with 2gb Ram; 2ghz Duo core processors
I need to create a report in SSRS 2015 but I need to bind that report to an external dataset .
I need it to work with parameters and stored procedure.
Another issue is that the report is standalone -rdlc.
Can I call the report from a webservice .asmx not wcf and render it automatically in pdf format?
Help!!!
I want to install SQLExp2K5 with Advanced Services on a standalone basis on my Dell Inspiron XPS laptop (Win XP sp2, .NET 2.0; 2gb RAM; 8mb broadband; hardware firewall/router) so that I can learn SQL/VB/VWD, and want to use SQL E 2K5 without internet connectivity (at least until I know what the hell I'm doing!)
Really confused as to what component(s), and services I should/should not install - so I've listed my questions below:
1. Service Account: As I'm not on / dont have a domain, i presume using a domain user account is not an option for me. Should I use the Local Service account ? If so, what are/can be the issues in doing so?
2. Authentication Mode: Is Windows Authentication the one to use for a standalone install?; how would I enable the "sa" account and set an "sa" password? In fact, do I even need an"sa" account / password for a standalone, non internet connected install?
3. Components at install: Is it OK to install all components first off?
4. IIS: Is it possible to install IIS and not allow it access to the internet (or is this a stupid question -bearing in mind I dont really know what IIS is/does)
5: Business Intelligence Development Suite: How do I add BIDS once (IF) I manage to install SQLExp2K5-Adv.Ser,?
6. SQLExp2K5 Books on-line: Am I right in thinking that I should install this after installing SQLExp2K5?
7: Visual Basic Express/Visual Web Developer Express: Do these need to be configured seperately to work with SQLExp2K5?
Sorry about the length of this post, but have tried to be as clear as possible. Also apologise in advance for silly/stupid questions :)
All help and advice greatly appreciated.
Thanks,
sqlexpressbeginner
Hullo all
I have two machines,
One is a standalone machine and the other is on a domain network. How can I run a stored procedure/job on the standalone machine from the domain machine ?
running the procedure as a Domain user results in a failed job/stored proc.
also creating an sql login and attempting to run it as that user also fails. How can I solve this problem ?
please e-mail me at wayde@sunnygrp.com if you have any thoughts...
I just want to run a webiste off my home computer with a dynamic address.It seems I can do all I want with the SQL that comes with vs2005 except being able to backup the DBIs the SQL 2005 that comes with vs2005 good enoh for everything I should want to do?? Is there some chart somewhere that explains the differences ?
View 4 Replies View RelatedMy server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
Hi All,
View 14 Replies View RelatedHi,
View 36 Replies View RelatedWhen I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
Dear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy
View 10 Replies View RelatedWhen I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
Hi All,
Please some one help me...
I have to insert a csv into one table in sql server. But the problem is the file is in one server and SQL SERVER 2005 is in other server..
how do i insert the file....
please help me.....