I need to start a job task from the command line. Does anyone know of the correct command(s) to do this?
I also need to check to see if a specific job task is currently executing from the command line. Does anyone know of the correct command(s) to do this?
Thanks for any assistance.
Jim
I've exported surface area configuration settings from a server and tried importing them onto another server. The remote connection settings are imported but the SQLBrowser service remains Disabled. Am I doing something wrong?
The command line command I ran (in the C:Program FilesMicrosoft SQL Server90Shared directory) is "sac.exe in sacconfig.xml".
The following is my config file:
<?xml version="1.0" encoding="utf-8"?>
<CommandArguments xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Components>
<anyType xsi:type="Component">
<Type>SqlServer</Type>
<InternalType>DatabaseEngine</InternalType>
<Instances>
<anyType xsi:type="Instance">
<Name>SQLEXPRESS</Name>
<Service>
<Name>MSSQL$SQLEXPRESS</Name>
<StartMode>Auto</StartMode>
<ServiceState>Running</ServiceState>
</Service>
<Features>
<anyType xsi:type="Pair">
<Key>AdhocRemoteQueries</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>CLRIntegration</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>DedicatedAdministrator</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>DatabaseMail</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>HTTPAccess</Key>
<Value xsi:type="ArrayOfAnyType" />
</anyType>
<anyType xsi:type="Pair">
<Key>OLEAutomation</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>ServiceBroker</Key>
<Value xsi:type="ArrayOfAnyType" />
</anyType>
<anyType xsi:type="Pair">
<Key>SQLMail</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>WebAssistant</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>XP_cmdshell</Key>
<Value xsi:type="xsd:int">0</Value>
</anyType>
</Features>
<Protocol>
<anyType xsi:type="Pair">
<Key>NamedPipes</Key>
<Value xsi:type="xsd:boolean">true</Value>
</anyType>
<anyType xsi:type="Pair">
<Key>TCPIP</Key>
<Value xsi:type="xsd:boolean">true</Value>
</anyType>
</Protocol>
</anyType>
</Instances>
</anyType>
<anyType xsi:type="Component">
<Type>SqlBrowser</Type>
<InternalType>SqlBrowserService</InternalType>
<Service>
<Name>SQLBrowser</Name>
<StartMode>Auto</StartMode>
<ServiceState>Running</ServiceState>
</Service>
</anyType>
</Components>
<Version>9.0.242.0</Version>
</CommandArguments>
Hi all
I currently have a problem where I need to create a backup from MSSQL, via a command line, ideally from a batch script. This is on a PC. Each machine has SQL Server 2000 on.
I just need to know the code that dos will tell it to run the sql statement. Ideally the command will also give the directory to place the backup.
Regards MiloJ
Hi Everyone!
I'm trying to run have SQL Server Agent excute an SSIS package from the command line and I keep recieving an error message. I will assume that I have miss typed something. Can someone validate that the execute line looks workable?
"C:Program Files (x86)Microsoft SQL Server90DTSBinndtexec.exe" /F "F:ProjectsSSISCustomerMaster_1CustomerMaster_1Package.dtsx" /CONNECTION "APLUS70F70.AKIN";""uid=AKIN;Dsn=APLUS70F70;"" /CONNECTION "CRMPSQL.IBT_Aplus";""Data Source=CRMPSQL;Initial Catalog=IBT_Aplus;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
Thanks in advance!
Anthony Akin
Hi,I have dumped a very large database from mysql (using mysqldump program)as a raw sql file. The reason was, convert this database to a MSSQLdatabase. Since mysqldump creates the file as raw sql file with thedatabase-table structures and the data in it, I thought using OSQL commandline utilities should work to out this whole database in MSSQL server.I have run this command from command line:osql -u sa -i mysqldump.sqlIt is going since yesterday. It has been almost 36 hours that it'sstarted. And in the mssql server, I see no database created yet. On thescreen of the command line, I see bunch of numbers are going in order. Iassume they are row numbers of the tables processed. But, if it is doing it,then where is it saving all this data ? I have checked the tempdb, pub db,other dbs, and I see no tables related to the database I am inserting. Willit populate it at the and of the job ? Or, am I doing something wrong here?Regards.Murtix.
View 2 Replies View Related
Hello friends I want to ask that by which command I can know about how many process are currently running on the server ?
Waiting for reply.......
How to launch Oracle SQL Developer through "Run" window in windows as we can launch SQL Server Management studio through "Run" command line using command line "sqlwb -S localhost -d MyDB -U sa -P
View 4 Replies View Related
Hi All,
I created a SSIS package to import an excel spreadsheet into my data warehouse.
When I run the package it runs fine. When I created a SQL Job to run the package I get the following error:
Option "Source=D:HelpDeskImportBook2.xls;Extended" is not valid. The command line parameters are invalid.
Now if I look at my source connection string in the job it looks like the following:
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:HelpDeskImportBook2.xls;Extended Properties=HDR=YES;EXCEL 8.0;HDR=YES";
Does anyone know why it appears that my connection string looks like it is being cut off and does anyone know how I can correct the problem?
Thanks,
Scott
I have a ForEachLoop parent pkg that reads thru the file system of dtsx to be executed.
I would like to pass CLI parms to the command itself (dtexec). I'm not looking at passing values to the child pkgs but rather additional command line values such as:
/CONFIGFILE "C:myconfig.dtsConfig.
In my expression builder for the PackageName I added the additional string but during the execution, the reference to my dtsconfig is ignored without any errors and the child pkg runs using the default values provided at design time.
@[User::PackageToRun] + " /CONFIGFILE C:\myconfig.dtsConfig ".
How does one add additional CL values during the runtime for Execute Package Task?
Thanks,
Anatole
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters.
1 :Control Flow Excute SQL task: Truncate Table
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
Any ides welcome
thanks in advance
David
Using Query Analyzer, I can right click on an object and select "scriptobject to new window as create" and I get the text of the object'sdefinition (schema). Can I get same result from command line, i.e., fromosql, I can get text output for the definition of the object (something likedefncopy under Sybase)? If so, what is the command or store procedure name?Thanks in advance.
View 2 Replies View RelatedIs there any command line that I can use to do select from databases (SQL 2005)
View 4 Replies View Relatedhi I would appreciate if someone demonstrate how to automate ftp in a command line from within a batch file. I do want to move certain files from one server to another via ftp command line in an automatic fashion via running the batch periodically.
thanks
Ali
hi: I can't seem to run BCP thru the command line.
bcp pubs..authors out c:authors.txt -c -Usa -P
error:
Msg 170, Level 15, State 1, Server Y47SA, Procedure , Line 1
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near'.'.
I've been trying to run BCP thru command line all day. I tried OSQL, ISQL. I find this utility very
frustrating. btw - I have installed SP2.
any thoughts would be much appreciated.
TIA
deanna
Anyone know where I can find some command line tools such as RCMD etc.. Thank you.;)
View 1 Replies View RelatedI'm trying to insert into a table 2 values one of which is an
exec master..xp_cmdshell @command where I have assigned @command with a value
this statement gives me the result into a 1 col. table fine:
insert into mytable99(col1) exec master..xp_cmdshell @command
now what I want to do is put col2 in there as well!!
ie. insert into mytable99(col1,col2) values (exec master..xp_cmdshell @command, '123')
I get a sytax error ... on the exec ??
Could anyone help re the proper way of doing this ... thanks in advance
I use a similar command below to insert into a temp table the result of a large command line call to an exectable with many parameters passed in the command of which the result passed back contains many items. I then parse the response string to get my results...
set @command = 'dir'
insert into tsverisign(response) exec master..xp_cmdshell @command
My question is our can I insert two values at the same time to this same table one of which is my "exec master..xp_cmdshell @command"
similar to insert into tables (field_a, feild_b) values ('1','2')
Something like (and I know this does not work):
insert into tsverisign(response,trans_id)
values (exec master..xp_cmdshell @command, '123')
Any help would be greatly appreciated .... PS I'm new to MS SQL 2000 and proper syntax etc. etc. so I need full example so I can try. :rolleyes:
Hi All,
I was given a task of coming up with the script to recreate an existing database using a command line. I would use this script in case when the server is down and I can't get to Query Analyzer or EM to recreate it. I am not sure where to start. Any ideas are greatly appreciated.
Thanks.
What ius the synthax to backup an SQLServer DB from the command line ?
Thanks
Can someone give me the command to restart SQL?
Thanks
I want to restore a backup copy of a database from the command line. Canthis be done?Thanks, Tom.
View 2 Replies View RelatedHi Sir:Is any possible to run DTS package from Command Line ?Lucas
View 1 Replies View RelatedI am trying to create an quiet install for SQL Server Express. The install is being run under a local administrators account. However, when a user, who is only in the local users group, accesses the application using ClickOnce deplolyment, it says SQL Server Express Edition is not installed.
-Dan
Hello,
How can I set SQL Profiler to capture the logs via command line?
This is what I have:
I already have a SQL Profiler Template (fooTemplate.tdf) which tells what I need SQL to capture.
C:>"C:Program FilesMicrosoft SQL Server90ToolsBinnPROFILER90.EXE" /Sfoo /Dfoo /E /T"c:fooTemplate.tdf" /Oc:mysql.out
What other parameters am I missing?
Thanks!
J
Hi all,
A quick newbie question...
I am trying to install SQL Server 2005 Standard and upgrade from Express edition. The Edition Change check tells me I must run the setup from the command prompt "and include the SKUUPGRADE=1 parameter", but I don't know how to enter this from the command line.
I've tried "D:setup SKUUPGRADE=1" and "D:setup -SKUUPGRADE=1", as well as "D:setup.exe /SKUUPGRADE=1" without success.
Can anyone give me a clue as to where I'm going wrong?
Thanks in advance.
Slammin!
Hello everyone!
Bit of a problem executing a DTS command from a command line.
I have the following variables defined in my package:
UserVarchar1
UserVarchar2
UserVarchar3
All have a scope of Package, all of the mstrings
The command I'm attempting to run in 1 line is:
DTEXEC /FILE "C:SSIS PackagesED-CustomersPackage.dtsx"
/SET Package.Variables[User::UserVarchar1].value;"10"
/SET Package.Variables[User::UserVarchar2].value;"30719"
/SET Package.Variables[User::UserVarchar3].value;"BILLTO"
Description: The package path referenced an object that cannot be found: "Package.Variables[User::UserVarchar1].value". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
DTExec: Could not set Package.Variables[User::UserVarchar1].value value to 10.
Any idea why?
Thanks for the help!
Hey Folks,
I have inherited a project from a co-worker who has had a family tradegy, and I am trying to get up to speed with her project.
We have an SQL server 7 database which is getting backed up every night (by SQL itself) into a .BAK file. I need to know if it is possible to restore this file from the command line (a DOS prompt.) I know (or think I know) how to do it from within SQL Enterprise Manager, however the specific needs of this project require it be done from a command line on the machine.
I really am not an SQL guru...I don't even think I qualify as "knowing what I am doing" at all, so any advice you can offer will be greatly appreciated. This is kind og urgent, so your thoughts are welcome!
Thanks!
Mike
Does any know of a technique to filter out headers dashes and row count in an output file of an isql result? These switches seem to be available when running as isql/w, but not the command line. The -h-1 argument for no headers had no effect. Thanks in advance. Ron Hurley
View 1 Replies View RelatedDoes anyone know how to start sqlserver 7.0 from command line for windows 98?
Thanks
I'm trying to use the rcmd utility and when i try to connect to a server with it i get this error...
system not found or service not active? How do you activate the rcmd service? thanks for your help.
hello to all, and I hope you can help.
this is the code from BOL
dtsrun /Sserver_name /Uuser_nrame /Ppassword /Npackage_name /Mpackage_password /Rrepository_name
I have followed it and come up with ...
dtsrun /SPC-409 /Usa /Pmypassword /Nemployee_export /M? /R?
where can I know the repository_name, is it one of the following:
DTS package
Meta data service package
Meta data
all under Data Transformation Service folder in SQL Server
Thanks
Al
Hi all,
Are there any parameters for the SQLMANGR program???
I need to start it from the install script, and
have it autostart....
I found a single parameter /n that starts
the program without any display -
But I need it to autostart the server service itself,
so i can do some osql stuff after the installtion is completed.
thanks
tony