Starting The SQL Service Through Enterprise Manager
Jul 23, 2005
Folks,
We're implementing a software based mirroring solution. This solution
requires that the SQL Server service on the target server be stopped
while data is being replicated from the source server.
One problem we encountered while testing was that the SQL Server
Service on the target server was inadvertantly started when users
selected that server in Enterprise Manager. Is there any way to keep
the service from starting through Enterprise Manager?
Thanks
View 2 Replies
ADVERTISEMENT
Jul 20, 2005
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies
View Related
Dec 6, 2006
IF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies
View Related
Jul 20, 2005
SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies
View Related
Jun 21, 2006
I would like to reinstall the enterprise manager of sql server 2000,and i have currently sql server 2000 SP4 installed on it.I googled on it, and read that installation of enterprise manager ispossible from the setup disk, however, this is not possible: it rejectsbecause of the service pack.How can I reinstall enterprise manager, without haveing to uninstallsql completely?ThanksPrem
View 4 Replies
View Related
May 18, 2007
Hello,
I had created a windows service using C#. I set its Startup Type as Automatic but it is not getting started automatically when my System Starts.
View 3 Replies
View Related
Feb 1, 2007
When our rep distribution services time-out (several times a day) some dba's just restart the service while others restart the rep job which starts the service. Are there any differences between these two methods? Does restarting the service inherit any changes made to the job's attributes?
Thanks!
View 1 Replies
View Related
Nov 19, 2007
I have a 2 node cluster in an active/active configuration. Install is SQL 2005 Enterprise Edition x64, patched to KB934458
If I try and run SQL Server Configuration Manager on node 1 the application does not start and I get the following message: "Connection to target machine could not be made in a timely fashion." This happens for both SQL Server instances (SQL01 and SQL02).
I can connect fine on the 2nd node with both instances.
Further to this, if I try and run the Surface Area Configuration tool on node 1 - I can't connect to either SQL Instance (SQL01 and SQL02)
If I run the SAC tool on the second node, I can connect to the instance SQL02 that is active on node 2. If I fail that SQL Instance over to node 1, I can no longer connect
I think there is clearly something not quite right about node 1.
Any help/pointers would be appreciated.
View 5 Replies
View Related
Jul 2, 2007
Hi,
I installed SQL Server Studio MAnagement Express, and for some reason - I can't login to the server database engine. I try to enter '.SQL EXPRESS' in the 'connect to server' form, but keep getting error. I understand I have to start the service first, going into Start>All ProgramsMicrosoft SQL Server 2005>configuration Tools> -here I got nothing but 'SQL Server Error and Usage Reporting'... I assume something is missing here for controling the server, correct ?
View 1 Replies
View Related
Mar 11, 2008
I installed SQL Server 2005 on Windows 2000 SP4 Machine. All services except the Reporting Service is running in the PC. On trying to start the service a message saying "Could not Start reporting Service. No error reported....."
Uninstalled SQL Server2005 and installed again. At present no service pack installed. Please Help
View 1 Replies
View Related
Apr 24, 2008
hello everyone,
I wonder if you can help me with a problem I have trying to support a web based application that uses SQL 2005.
The problem is that the application developers tell me that it is neccessary to stop and restart the SQL service as part of the troubleshooting process when their application stops working. Unfortunately, the customer has our application database on a clustered SQL instance that is used by other applications so they cannot just stop and restart the SQL service because this will have a major impact on all the other instances...
Is there another way that would effectively do the same thing as stopping and restarting the SQL service? I have read that dettaching and re-attaching might do the same but application developers say onlt stopping/restarting services is sufficient to break the connection with the application.
Any advice would be really welcome as I am completely new to SQL and struggling with this!
Many thanks, Nick.
View 5 Replies
View Related
Jul 27, 2001
I'm not sure i was clear the first time. When the MSSQLServer Service is stopped and started, it stops the SQLServerAgent Service also. But when the MSSQLServer Service is started, it DOES NOT start the SQLServerAgent Service. I don't think this is configurable, so I was wondering if someone had a workaround (.bat file, service dependency, etc.).
TIA,
Mike
View 1 Replies
View Related
Oct 26, 2015
I'm running SQL 2012 on a Win 2012 VM and the SQL server shuts down automatically after starting the SQL Server & SQL Server Agent Jobs.
View 9 Replies
View Related
Jul 23, 2005
Hello there,This is a bit of strange one.My local version of SQL Server fails to start when I boot yet if Istart Enterprise Manager its started and working fine. ISQL or QueryAnalyzer is also not working.If I try and register the server by another SQL Server is not there. Methinks that the named pipes might be a bit broken but would appreciateany advise from people.ThanksGinters
View 2 Replies
View Related
Dec 11, 2006
I installed SQL Server 2005 Integration services on Windows XP machine. Then I went to the SQL Server Configuration Manager and tried to Start the SSIS service. The "Log On As" value is "NT AUTHORITYNetworkService". But I get the follwoing error:
The request failed or the service did not respond in a timely fashion. COnsult the event log or other applicable error logs for details.
Event Log details:
------------------
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I tried running the service using the "Local Service" and the "Local System" accounts also, but am still encountering the same error. What do I do...
View 2 Replies
View Related
Sep 25, 2006
Hi,
Anybody kindly help me.
We have windows server 2000 and sql server 2005 on the same machine with 15 clients. There was a power failure. The sql server is automatically stopped. When we tried to start the service we are getting the error as action failed please check application event log for errors.
This has happened for the 2 times, kindly tell me why this happens and what precaution we can take and is there any setting we are missing. Since I am newbie to sql server and windows server I am unable to solve this problem.
Thanks
View 13 Replies
View Related
Apr 28, 2006
Hello All,
I am installing SQL Server Express from the command line using the following parameters
INSTANCENAME=MSSQLSERVER ADDLOCAL=ALL SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SAPWD=TEST
After the install is done I start the service form the command prompt using
start mssqlserver
I see that the SQL Server service has started under NETWORK SERVICE account!!! when the documentation i Read on MSDN says it starts in Local System account
Can any one explain me the possible reasons
Thanks
View 8 Replies
View Related
Mar 10, 2004
I have a Win 2003 server running 3 instances of SQL 2000 Enterprise.
The problem is I can only start 2 of the 3 Job Agents at a time, as the 3rd gets stuck in a starting state.
Has anyone struck this problem before?
Thanks.
View 8 Replies
View Related
Apr 23, 2015
One server, a part of a 2 node always on cluster, had problems, I had to restart.
I'm getting this error for example now:
Error: 49910, Severity: 10, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
+
SQL Server was unable to run a new system task, either because there is insufficient memory or the number of configured sessions exceeds the maximum allowed in the server. Verify that the server has adequate memory. Use sp_configure with option 'user connections' to check the maximum number of user connections allowed. Use sys.dm_exec_sessions to check the current number of sessions, including user processes.
Now, on the instance I have activated maximum servere memory, my question; Is it possible to adjust this setting without starting the service?
Some parameter for example?
The server itself have enough memory.
View 3 Replies
View Related
Jun 29, 2006
Hi, I've been trying for the past week to get SQL 2005 Server up and running.The SQL is up and running however I am unable to get the Reporting service to start. The log file is below but the main line is:
ReportingServicesService!library!4!29/06/2006-14:33:45:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException:The user or group name 'VIDICOMASPNET' is not recognized.
But the domain user ASPNET is present. Similar posts across the internet mention about the .NET Framework not be installed correctly. I have reinstalled it many times.
Any help is most appreciated.
Tom
Here is the full log file:
<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product> <Locale>en-US</Locale> <TimeZone>GMT Daylight Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesLogFilesReportServerService__main_06_29_2006_14_33_39.log</Path> <SystemName>CRM</SystemName> <OSName>Microsoft Windows NT 5.0.2195 Service Pack 4</OSName> <OSVersion>5.0.2195.262144</OSVersion></Header>ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.ReportingServicesService!servicecontroller!9!29/06/2006-14:33:45:: Total Physical memory: 267894784ReportingServicesService!library!4!29/06/2006-14:33:45:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized.ReportingServicesService!servicecontroller!4!29/06/2006-14:33:47:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized. at Microsoft.ReportingServices.Library.Native.NameToSid(String name) at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
View 5 Replies
View Related
Nov 30, 2006
Hi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
View 2 Replies
View Related
Sep 10, 2005
I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies
View Related
Mar 21, 2001
When I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
View 2 Replies
View Related
Jun 11, 2001
Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies
View Related
Jun 12, 2001
Hi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
View 1 Replies
View Related
Jun 20, 2001
We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
View 2 Replies
View Related
Sep 26, 2001
I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies
View Related
Jul 28, 2000
I am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?
View 5 Replies
View Related
Jan 25, 2001
I have access to a SQL 7 server via my ISP Hosting account. I know Enterprise manager comes with the server software, but how can I get a copy of JUST Enterprise Manager?
JD
View 1 Replies
View Related
Apr 17, 2000
Is non-SA account able to view the SQL Enterprise Manager?
Thanks in advance!
Plum
View 3 Replies
View Related
Aug 3, 1998
Is it possible to administer both 6.5 and 7.0 databases from the same SQL Enterprise Manager? I have read that you cannot do this because the 7.0 "plug-in" to the MMC wont work with 6.5 databases.
View 2 Replies
View Related
Nov 8, 2001
We had database corruption and cannot access the Enterprise Manager. DBCC returned errors 9000 to 9999 which I can't get any suggestions on how to handle from BOL. Any ideas!!!!! Thanks.
View 4 Replies
View Related
Mar 13, 2001
Hi,
I would like to know if we can present users to access details database information about the databases on a server through Enterprise Manager.
If you create a SQL login and do NOT give it access to any database, if someone logons on your server with enterprise manager, even though he does not have access to any database, he will still see the list of all database on your servers plus tons of sensitive information like database owner.
Is is possible to limit enterprise manager to only view information about database that the user has access to?
Thanks
Mark
View 2 Replies
View Related
