I would like to enter info into the startup service account so that the MS
SQL Server Agent will run under this account. Then I can run jobs.
However, I don't know why the "startup service account" info is
greyed out, which prevents me from entering this information.
Any help would be appreciated!!
I have several DTS jobs that runs well as a job with my nt login account for the SQL agent service startup account, but if I use the System account
they fail with this error.
" Error opening datafile: Access is denied. Error source: Microsoft Data Transformation Services Flat File Rowset Provider"
The data has change access to the System account under the NT security.
Thank you in advanced.
Jorge
Hello all,
I just inherited a SQL Server that was set up by a non-DBA. It`s running NT 4.0 and SQL Server 6.50 - 6.50.201 (the vendor hasn`t certified the product on SP4). I am trying to change the SQL Executive Service to use a non-system logon account. The account that I want to use is running SQL Executive on 9 other servers.
I went into Usrmgr and added the account to the administrators group. Made sure that it has rights to:
log on as a service, log on as a batch job, increase quotas, act as part of the operating system, replace a process level token.
When I try to change to that id in services, I get the following error:
"cannot set the startup parameters for SQL Executive service. Error 1057 occurred. The account name is invalid or does not exist."
Looking in Technet, I found that if "log on as a service" isn`t set you could get this message but I`ve check/re-checked, had someone else check and it`s set.
Any help would be appreciated!
Hello, everyone:
I want to change Startup Service Account of an instance on SQL Server 2000 from System Account to a Domain Account from Enterprise Manager. What impact maybe bring up on database and frond end?
Thanks
ZYT
During install of SQL Server 2005, we can of course use a domain account or the built-in system account for running the services. I lean toward domain for obvious reaons but would like to know a +/- to each option and why I'd choose one over the other and what consequences or limitations one may encounter if I choose one over the other.
View 6 Replies View RelatedHi,
Is there any way to use different email accounts for sql mail dynamically on sql server 2000?
Here is the problem:
My sql server is configured to start mail session under account 'xxnotifyxx'.
There are many jobs scheduled to run queries and send out emails to different user groups within the company as well as outside the company from 'xxnotifyxx' as a sender.
However, one of the usergroup within the company is asking for sending out their emails ( from scheduled tasks that uses xp_sendmail ) using 'publishergroup' as a sender.
As far as I know, this is not possible (sql server 2000, exchange 2000 client win2000 ) until I change the mail session configuration to start under 'publishergroup' in stead of 'xxnotifyxx'. If I do this, 9 other groups have problems with this.
Is there a work around for this kind of situation?
Thanks,
Shaili
:rolleyes:
Hi,
The SQL Service Manager is not running automatically despite that fact the the STartup type for the following service IS set to Automatic:
C:Program FilesMicrosoft SQL ServerMSSQLBinnsqlservr.exe -sMSSQLSERVER
When I start my PC and look at the taskbar (or is it better called the status bar), the service Manager appears with a big WHITE circle and when I get the tooltip it says:
"Unknown - \ - MSSQLServer"
Can someone please help me out.
Hi,
The SQL Service Manager is not running automatically despite that fact the the STartup type for the following service IS set to Automatic:
C:Program FilesMicrosoft SQL ServerMSSQLBinnsqlservr.exe -sMSSQLSERVER
When I start my PC and look at the taskbar (or is it better called the status bar), the service Manager appears with a big WHITE circle and when I get the tooltip it says that
"Unknown - \ - MSSQLServer"
Can someone please help me out.
In the SP1 update of SSIS there was a call from the SSIS service that would attempt to validate itself against the http://crl.microsoft.com web site. If the SSIS service didn't have access to the internet then it would timeout and not start the service. In our company we have our development systems behind a firewall which only allows for limited internet access due to it being a development system.
Does the installation of SP2 remove this authentication restriction?
...cordell...
Problem Description Reference Documents:
http://support.microsoft.com/default.aspx/kb/918644
http://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=124887.
I am looking to make the primary key auto increment by 1. I have found by looking around the internet that you need to do this in the Tables -> [Table Name] -> Columns -> [Column Name], Properties window, and I see the "Identity Increment" however all of the properties there are greyed out -- I can't access them. Any ideas on how to make this work?For some background: I'm running SQL Server 2005 with Visual Studio 2005. To create this database, I right-clicked on my project, and went to 'Add SQL Database', I filled in the columns all from within visual studio.
View 1 Replies View RelatedHello! I have the following problem. I developed CLR Stored Procedure "StartNotification" and deploy it on db. This sp calls external web service. Furthermore, this sp is called according with SQL Server Agent Job's schedule. On my PC SQL Server works under Local System account and this web service is called correctly (Executed as user: NT AUTHORITYSYSTEM). But on ther other server the following exception is raised during job running:
Date 17.04.2007 16:42:10
Log Job History (FailureNotificationJob)
Step ID 1
Server MSK-CDBPO-01
Job Name FailureNotificationJob
Step Name MainStep
Duration 00:00:00
Sql Severity 16
Sql Message ID 6522
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: CORPmssqlserver.
A .NET Framework error occurred during execution
of user defined routine or aggregate 'StartNotification':
System.Security.SecurityException: Request for the permission of type
'System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' failed. System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand,
StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Net. The step failed.
What is the reason of this behaviour? Unfortunately I do not have direct access to this server.
I have the following guesses:
1) CORPmssqlserver may have not enough permissions to call web service
2) Something wrong with SQL Server account's permissions
2) Something wrong with SQL Server Agent account's permissions
I will take the will for the deed. Thanks.
i have a sql cluster setup, and need to change the user account that sqlserver starts with....any ideas? i screwed up and left it using localsystem account and now i can`t get sqlmail to work. i`m trying to avoid having to create the cluster again. any info appreciated.......jim jones
View 1 Replies View RelatedI am running SQL 2008 R2. I have SQL Full-Text Search installed (part of a standard Automated build) - but disabled and switched-off as the applications don't need it. However as a result I get SQL Server error 9954:
SQL Server failed to communicate with filter daemon launch service (Windows error: Windows Error: hr = 0x80070422(failed to retrieve text for this error)). Full-Text filter daemon process failed to start. Full-text search functionality will not be available.
appear in the event / error logs everytime I start SQL server. Is it possible to suppress this error (other than by starting the SQL Full-text service) ...
hopefully, the subject addresses my problem. the server is running like a charm.
Service pack 2 has been installed. The only connection I remember creating after the initial installation is a remote connection.
I've checked to make sure I am allowing multiple protocols.
I am not able to get a response from the following:
C:Usersamfrizzell>SQLCmd -S .aaron-toshiba -E -Q "SELECT @@Version"
HResult 0xFFFFFFFF, Level 16, State 1
SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establi
shing a connection to the server. When connecting to SQL Server 2005, this failu
re may be caused by the fact that under the default settings SQL Server does not
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
The instance is running as I can connect to it through Visual Studio 2005.
What did I do wrong? I could really use this application in order for me to develop websites. It's sort of a pain to go to another computer to use the more powerful features of SQL Server 2005 Server management Studio (standard edition).
Help me... somebody please help me.
Thanks.
Aaron
On a fairly new install of SQL 2005 64-bit, upon bootup the Active Directory Helper Serivice is aborting with the error 3221225572 (0XC0000064). When an attempt is made to start the service manually the following error appears: "Windows could not start teh SQL Server Active Directory Helper on Local Computer. For more infromation, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to the service-specific error code - 1073741724."
The service is strating up under the network services account, which I am suspicous may be a problem. Currently the SQL server is running under SQL 2005 SP2 with no post service pack hotfixes. Do you have any advice on how to get the service to launch without errors?
Hi all,
I do understand that it is highly recomended to have aserprate user (perfered a domain user account) for each of the SQL Server service and SQL Agent service.
What is the reason behind that? (Someone told me to not run the service with an account that has a powerul privilegs! - I don't undrstanmd this point can you explain it please?)
What is the diffrent between: 1- Local System account 2 -Network Service account
Thanks in advanced!
CS4Ever
Microsoft recommends that you do not use the Network Service account to run the SQL Server service (see http://msdn2.microsoft.com/en-us/library/ms143504.aspx).
Can anyone tell me what the drawbacks are of doing this?
Okay now this is weird, today the Reporting Services was not running and here are the entries in the event log:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 12/12/2007
Time: 9:47:22
User: N/A
Computer: TFS
Description:
The ReportServer service was unable to log on as DOMAINTFSREPORTS with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: ReportServer
Domain and account: DOMAINTFSREPORTS
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
I am the administrator of the machines and I can assure you that no domain policy has changed for a couple of weeks. What should I look for?
Hi, I have a service using SQL 2005 Express database, the service is started automatically on system startup, most of the times it can logon to the database successfully, however, sometimes, I got the following error:
"Error: 18456, Severity: 14, State: 16"
Any suggestions?
Thanks in advance!
Yuxi
2006-11-22 11:09:49.90 Server Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2006-11-22 11:09:49.92 Server (c) 2005 Microsoft Corporation.
2006-11-22 11:09:49.92 Server All rights reserved.
2006-11-22 11:09:49.93 Server Server process ID is 1956.
2006-11-22 11:09:49.93 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2006-11-22 11:09:49.93 Server This instance of SQL Server last reported using a process ID of 1952 at 11/22/2006 11:08:07 AM (local) 11/22/2006 7:08:07 PM (UTC). This is an informational message only; no user action is required.
2006-11-22 11:09:49.95 Server Registry startup parameters:
2006-11-22 11:09:49.95 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2006-11-22 11:09:49.95 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2006-11-22 11:09:49.95 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2006-11-22 11:09:49.98 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-11-22 11:09:50.00 Server Detected 4 CPUs. This is an informational message; no user action is required.
2006-11-22 11:09:50.95 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-11-22 11:09:50.96 Server Database mirroring has been enabled on this instance of SQL Server.
2006-11-22 11:09:50.96 spid4s Starting up database 'master'.
2006-11-22 11:09:51.06 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2006-11-22 11:09:51.18 spid4s SQL Trace ID 1 was started by login "sa".
2006-11-22 11:09:51.23 spid4s Starting up database 'mssqlsystemresource'.
2006-11-22 11:09:51.25 spid4s The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2006-11-22 11:09:51.59 spid8s Starting up database 'model'.
2006-11-22 11:09:51.60 spid4s Server name is 'TestMachineTestSQLServer'. This is an informational message only. No user action is required.
2006-11-22 11:09:51.60 spid4s Starting up database 'msdb'.
2006-11-22 11:09:51.93 Server A self-generated certificate was successfully loaded for encryption.
2006-11-22 11:09:51.93 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalTestSQLServer ].
2006-11-22 11:09:51.93 Server Server local connection provider is ready to accept connection on [ \.pipeMSSQL$TestSQLServersqlquery ].
2006-11-22 11:09:51.93 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2006-11-22 11:09:51.95 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2006-11-22 11:09:52.12 spid8s Clearing tempdb database.
2006-11-22 11:09:53.12 spid8s Starting up database 'tempdb'.
2006-11-22 11:09:53.21 Logon Error: 18456, Severity: 14, State: 16.
2006-11-22 11:09:53.21 Logon Login failed for user 'sa'. [CLIENT: <local machine>]
2006-11-22 11:09:53.70 spid4s Recovery is complete. This is an informational message only. No user action is required.
2006-11-22 11:09:53.70 spid11s The Service Broker protocol transport is disabled or not configured.
2006-11-22 11:09:53.70 spid11s The Database Mirroring protocol transport is disabled or not configured.
2006-11-22 11:09:54.09 spid11s Service Broker manager has started.
2006-11-22 11:10:19.26 spid51 Starting up database 'TestDatabase'.
2006-11-22 11:10:19.42 spid51 Recovery is writing a checkpoint in database 'TestDatabase' (5). This is an informational message only. No user action is required.
2006-11-22 11:18:08.92 spid51 Starting up database 'TestDatabase'.
database : MS SQL server ver 6.50.201
problem: server startup / server time out
details
SQL server shows usage of 100 % CPU utilization, if started automatically / manually. and does not proceed / hangs up(server time out), but win nt operates extremely slow.
The background of the situation in brief is as stated below.
The errorlog was found to have the messages
warning : OPEN OBJECTS parameter may be too low.
Attempt was made to free up descriptors in localdes()
Run sp_configure to increase parameter value.
Error : 644, severity : 21, state; state 1
the non clustered leaf row entry for page 2 row 1 was not found in index page 40 indexid 2 database 'tempdb'
Error : 2620 severity 21 state 3
the offset of the row number at offset 32 does not match the entry in the offset table of the follwoing page : page pointer = 0x1395800, page no= 40, status = 0x2, objectid = 1, indexid = 2
Action taken
I used the sp_option to increase the open objects from default 500 to 1000, and the LE threshold maximum value to 400 from the default 200.
after which I used reconfigure go and restarted the computer to take the effect. The following did work fine and server was working ok. But then from yesterday I am having the problem that the MS SQL sever is utilizing the cpu to 98 - 99 % and I am not able to connect to the server.
I tried to start the server with the minimal configuration by specifying the -f option in the service manager start up options, it showed the following message
00/12/07 10:40:49.73 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
00/12/07 10:40:50.02 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
afterwhich I tried with the option of starting the sql server with the option -c -f
which in the event detail of the win nt shows
"mesg 18109: Recovery dbid 6 ckpt(55813,8) oldest tras= (55813,0)"
The open procedure for service "MSSQLServer" in DLL "SQLCTR60.DLL" has taken longer than the established wait time to complete. The wait time in milliseconds is shown in the data.
DB-LIBRARY error - SQL Server connection timed out.
and in the errorlog present in MSSQLLOG directory
00/12/07 15:06:43.24 spid1 Recovering Database 'master'
00/12/07 15:06:43.31 spid1 Recovery dbid 1 ckpt (7944,28) oldest tran=(7944,0)
00/12/07 15:06:43.41 spid1 1 transactions rolled forward
00/12/07 15:06:43.49 spid1 Activating disk 'AM'
00/12/07 15:06:43.49 kernel initializing virtual device 1, D:MSSQLDATAAM.DAT
00/12/07 15:06:43.50 spid1 Activating disk 'AMLOG'
00/12/07 15:06:43.50 kernel initializing virtual device 2, D:MSSQLDATAAMLOG.DAT
The dbid is / was 6 for both the instances, the database which is having this dbid is database name "AM" and is having above 1300 tables (approx)
what could be the problem and solution for it?
kindly help me out of this situation.
If any more information is needed please contact me on devendrakulkarni@yahoo.com / devendra@me.iitb.ernet.in
Regards
Devendra
How can I find account that the SQL Server service is using ?
Plz help.
Hello,
I had created a windows service using C#. I set its Startup Type as Automatic but it is not getting started automatically when my System Starts.
hi.. i do not know which to choose when my installation comes to the service account page ..
should i use the local system or write the domain user account ?
i use domain user account .. but what is my domain ?
Folks,
MSSQLServer and SQL Server Agent services under NT are running under a system account under our domain (setup many moons ago) for which we have lost the passsword. Is there any way we can recover these passwords?
Thanks.
Sam
Hi,
I am trying to set properties on a SQL Server7, but when I get to the tab for 'Startup Service account', it is greyed out. Also, the same for properties for SQL Server Agent.
Why can't I change it?
To schedule jobs, and have SQL mail, don't I need to set up a Startup Service Account?
Thanks for your help,
Judith
Has anyone ever converted from running SQL Server under the Local System account to running under a Domain User account?
I have often installed SQL using a Domain User account, but I am inheriting a couple of SQL Servers that were set up to run under Local System. I have never had to convert "on the fly" before.
If you have any input or insights, I would be grateful.
Regards,
hmscott
I just set up a SQL 2005 Server about a month ago that we will be moving all of our scattered DBs onto. I basically set it up with the default settings and didn't touch anything special, until I tried to install Microsoft System Center Essentials 2007 in our environment. I had problems getting it to use our SQL server, and a forum post told me to change all of the service accounts for SQL to use the LocalSystem login. So here are my service accounts:
SQL Server Integration Services
- NT AUTHORITYNetworkService
SQL Server FullText Search (MSSQLSERVER)
- LocalSystem
SQL Server (MSSQLSERVER)
- LocalSystem
SQL Server Analysis Services (MSSQLSERVER)
- LocalSystem
SQL Server Reporting Services (MSSQLSERVER)
- LocalSystem
SQL Server Browser
- LocalSystem
SQL Server Agent (MSSQLSERVER)
- LocalSystem
So Sandisk makes this software called CMC. It's for controlling their enterprise USB drives. And their software won't install. It errors out saying that it couldn't drop the database on our SQL server (but it doesn't exist). If I make an empty DB by the same name, it sees it, and then errors out anyway. I am using the SA login for testing (I was using a purposed SQL account before) so I don't think it's a rights issue. Sandisk says it should work, and they suggested I use SQL server express. But we run VMs, and running SQL server in another VM is going to use more of our memory pool. Plus we want centralized backups and all that.
Do my service account logins have anything to do with it? Can someone tell me what these should be set to by default so I can change them back?
Here's a trace I did when I tried to install the software:
-- network protocol: TCP/IP
set quoted_identifier on
set arithabort off
set numeric_roundabort off
set ansi_warnings on
set ansi_padding on
set ansi_nulls on
set concat_null_yields_null on
set cursor_close_on_commit off
set implicit_transactions off
set language us_english
set dateformat mdy
set datefirst 7
set transaction isolation level read committed
set implicit_transactions on
go
drop database [CruzerDb]
go
IF @@TRANCOUNT > 0 ROLLBACK TRAN
go
And here's more info if needed:
Product Version
- 9.00.3042.00
Edition
- Standard Edition
Server Collation
- SQL_Latin1_General_CP1_CI_AS
Is Clustered
- No
Is FullText Installed
- Yes
Is Integrated Security Only
- No
Is AWE Enabled
- No
# Processors (used by instance)
- 2
SqlServer2k is on the domain serverSqlServer2k is on a laptop tooI want to copy a database from the domain to the laptop over the networkusing the copy database wizard.I have done this before with no problem but this time I get thefollowing error:Your SQL Server Service is running under the local system account. Youneed to change your SQL Server Service account to have the rights tocopy files over the network.I went into the properties of MSSQLSERVER under Services andApplications and see no setting described.Where do manage the SQL Server Service?*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 3 Replies View Related
By default does CLR code run under the SQL Service Server account or the SQL Agent Service Account? Does anybody have a link to BOL or MSDN???
My assumption is its under SQL Server Service Account.
I'm trying to satisfy the DBA's security concerns in regards to CLR Code. If the account it runs under (Agent or service) has zero privliges will a dba still be able to maintain the server? Wouldnt all their backups work under a privilaged account that isnt the SQL Server Service Account?
Double posted in security.
Hi,
I come from an Oracle background, and am having trouble getting to grips with SqlServer
I've installed SqlServer 2005 and created a Database called Midas, which is owned by SA
I've created a login called ServiceAccount. I want this login to have 'select', 'update' and 'insert' permission on specific tables in the Midas database. How do I do this?
Hi All,
I understand Sql Server Integration Services by default uses"NT AuthorityNetwork Service" account as service account. Is running SSIS using "NT AuthorityNetwork Service" account is good or should we create a domain account to run the SSIS service.
Regards, Balaji Thiruvenkataraju.
On the screen "Service Account" during SQL 2005 Developer Edition, I am choosing built-in System Account = Local System and uncheck the Customzie for each service account. that means, that this system account is set to all services,
Right?
please refresh my memory on this.
Thanks,
I am trying to install an SQL Express 2005 instance and have the built-in system account set to "Local system" because I was having some security issues while trying to attach a database. Is there a command line switch that will allow me to do this?
If there isn't then I will have to make sure the clients uncheck the "Hide advanced settings" checkbox and I would rather not have them do anything but hit the next button.