Hi!
If I'm running a DTS with 2 connections(flat file source and SQL table destination) and a Data Driven Query Task, and then I get an error message saying "Stataments sould not be prepared. Line 2: Invalid syntax near "."
Which code should I look for the error? The message says Line 2 but i don't know where to look.
Thanks.
Hi,I'm running SQL Profiler on an SQL Server 2000 database. I see that onestored procedure gets repeatedly executed having a handle of '1'. Thisquery takes a long time to complete.How do I find what the text of the stored procedure is? I cant see anyhandle being created (using sp_prepare) with an id of '1' in theprofiler. Is there any way to force the server to re-prepare allstatements so that I can see the statement text and its preparation inSQL Profiler?Cheers,Birju
View 3 Replies View RelatedHello,I have a table which contains some nullable columns. I want to write asingle query, which can be prepared (ie. prepared statement), that canhandle null or non-null values for the where clause. Is this possiblein a standard-conforming manner?The simple for of the query is this:SELECT * FROM <table> WHERE <column> = <value>But when the value to be matched on is NULL, the syntax of the querymust change to be:SELECT * FROM <table> WHERE <column> IS <value>In the second case <value> is NULL.I know one option might be to change the ANSI NULL handling option,but I am loathe to do this (I have five RDBMS's to support, not justMSSSQL).I thought I might have been able to cheat using an IN clause to makethe SQL consistent, but no luck.ThanksKevin
View 6 Replies View RelatedI have an application which uses ODBC to insert, update, delete records in an MSSQL DB. The application uses prepared statements and keeps the odbc statement handles to execute the same statement multiple times.
This application works fine until triggers are introduced. The triggers are pretty simple and take the inserted, updated record and insert this information into another table.
If we change the application to not re-use the prepared statement handle, by closing the statement handle after each execute, it also works fine. (However, this results in bad performance.)
The error message is: "[ODBC SQL Server Driver]Connection is busy with results for another hstmt". If anyone has any information on this, I would greatly appreciate the help!!!
Thank you.
Christine
Hello Folks,
I have a problem with a prepared statement against SS2005 SP2 that I do not fully understand. I have a query that is prepared and executed from a java application that looks similar to this:
SELECT TOP 1 str.ID FROM bigtable1 big1
LEFT OUTER JOIN bigtable2 big2
ON (big1.ID = big2.ID)
LEFT OUTER JOIN htable h ON (big2.HID = h.HID AND h.DIRECTSW=1)
WHERE big1.ID IN (SELECT ID FROM ltable WHERE LID IN(SELECT
LID FROM LAS WHERE LASID = ? )) AND big2.COMPLID <> 2 AND big2.COMPLID <> 3
AND ISNULL(big2.date1, big2.date2) BETWEEN ? AND ?
When run as a prepared statement this runs in about 27 seconds. When run under the query component of Management Studio it runs in about 1 second. Before each run I am clearing the buffers and the prepared statement cache. When running these I have looked at the execution plan from profiler and they both look the same. If I change the
WHERE big1.ID IN (SELECT ID FROM ltable WHERE LID IN(SELECT
LID FROM LAS WHERE LASID = ? ))
to INNER JOIN it runs ~1 second in both environments.
Any pointers would be welcome to explain the disrepency.
Thanks, Mark
Hi all,
I recieve an error when I use the Lookup component in SSIS that reads:
Statement(s) could not be prepared.
I'm using a SQL 2005 DB as the source which runs into a lookup table and is use to compare records with an SQL 2000 Database. I've created connection managers successfully to both these databases. When trying to use the results of an SQL Query for the lookup to the SQL 2000 database (which is a linked server) and I try to map the columns, the error pops up and exits out of the lookup properties Window
The details to the error read:
Program Location:
at Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.Connections.SQLTaskConnectionOleDbClass.PrepareSQLStatement(String sql, Boolean bypassPrepare)
at Microsoft.DataTransformationServices.Design.DtsConnectionCommonControl.CheckSqlQuery()
I'm looking to use the results of this comparison to output in some form of a report. Ideas would be greatly appreciated!
Hi,
I am facing a problem while using pepared statement for inserting data in MS-Access db.
Code Snippet
private const String CONN_STR = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\Temp\TestDb.mdb";
conDatabase.Open(CONN_STR, "", "", -1);
String sQuery = "INSERT INTO " + sTableName +
" ([FileName],[IsCopied],[Size]) VALUES (@FileName,@IsCopied,@Size)";
cmdPrepStmnt.ActiveConnection = conDatabase;
cmdPrepStmnt.CommandText = sQuery;
cmdPrepStmnt.CommandType = CommandTypeEnum.adCmdText;
cmdPrepStmnt.Prepared = true;
int iCount = 0;
foreach (FileInfo f in fInfo)
{
Console.WriteLine("Adding File " + ++iCount + " of " + fInfo.Length + "; " + f.Name);
Parameter p1 = cmdPrepStmnt.CreateParameter("@FileName", ADODB.DataTypeEnum.adVarWChar, ParameterDirectionEnum.adParamInput, 255, f.FullName);
Parameter p3 = cmdPrepStmnt.CreateParameter("@IsCopied", ADODB.DataTypeEnum.adBoolean, ParameterDirectionEnum.adParamInput, 10, false);
Parameter p5 = cmdPrepStmnt.CreateParameter("@Size", ADODB.DataTypeEnum.adInteger, ParameterDirectionEnum.adParamInput, 10, f.Length);
cmdPrepStmnt.Parameters.Append(p1);
cmdPrepStmnt.Parameters.Append(p3);
cmdPrepStmnt.Parameters.Append(p5);
cmdPrepStmnt.Execute(out objAffected, ref obj, 0);
}
Code Snippet
FileName is coming as blank in db, while in debug mode i can see that it is being set with a proper filename. The other 2 params are inserting fine.
The FileName field is set as Text field with width length 255, and the incoming data is always shorter than 255 chars. The insertion happens without any errors/exceptions. I have also tried replacing the data for filename with a string like "Test", still it is inserting blank string.
Please help.
Prepared statement '(@CORP_NAME varchar(150),@REP_NAME varchar(150),@REP_TC_NO varch' expects parameter @CORP_NAME, which was not supplied
I know this is a classical error and I searched through the forum but I could no solve it. I am sure that I defined @CORP_NAME, but it says you did not. My code is below,please help me...
private void Submit1_ServerClick(object sender, System.EventArgs e)
{
erkaner = Page.Session.Contents["CORP_ID"].ToString();
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CORP_NAME", System.Data.SqlDbType.VarChar, 150, TextBox32.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_NAME", System.Data.SqlDbType.VarChar, 150, TextBox27.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_TC_NO", System.Data.SqlDbType.VarChar, 50, TextBox28.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CORP_ID", System.Data.SqlDbType.Int, 4, erkaner));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_EMAIL", System.Data.SqlDbType.VarChar, 50, TextBox29.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_TEL", System.Data.SqlDbType.VarChar, 50, TextBox30.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@REP_DUTY", System.Data.SqlDbType.VarChar, 150, TextBox31.Text));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@FOUND_YEAR", System.Data.SqlDbType.VarChar, 50, TextBox33.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@COUNTRY", System.Data.SqlDbType.VarChar, 50, DropDownListUlke.SelectedValue.ToString()));
if (DropDownListUlke.SelectedIndex == 148)
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CITY", System.Data.SqlDbType.VarChar, 50, DropdownlistSehir.SelectedValue.ToString()));else if(DropDownListUlke.SelectedIndex != 0 && DropDownListUlke.SelectedIndex != 148)
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CITY", System.Data.SqlDbType.VarChar, 50, TextBox1.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@SECTOR", System.Data.SqlDbType.VarChar, 150, RadioButtonList6.SelectedValue.ToString()));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@EMP_NUM", System.Data.SqlDbType.VarChar, 50, RadioButtonList1.SelectedValue.ToString()));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@CORP_ACT", System.Data.SqlDbType.VarChar, 150, DropDownList3.SelectedValue.ToString()));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@PC_NUM", System.Data.SqlDbType.VarChar, 50, TextBox35.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@INT_USER_NUM", System.Data.SqlDbType.VarChar, 50, "INT_USER_NUM"));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@HAVE_LAN", System.Data.SqlDbType.VarChar, 50, RadioButtonList3.SelectedValue.ToString()));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@HAVE_SERVER", System.Data.SqlDbType.VarChar, 50, RadioButtonList4.SelectedValue.ToString()));
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@ECOM_SER_NUM", System.Data.SqlDbType.VarChar, 50, TextBox37.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@OT_SER_NUM", System.Data.SqlDbType.VarChar, 50, TextBox38.Text));sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@INT_CON_TYPE", System.Data.SqlDbType.VarChar, 50, RadioButtonList5.SelectedValue.ToString()));
if (CheckBox1.Checked)
sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION1", System.Data.SqlDbType.VarChar, 500, "Ticari Uygulamalar (B2B,B2C,e-iş,e-ihracat,…)"));else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION1", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox2.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION2", System.Data.SqlDbType.VarChar, 500, "Yönetişim Uygulamaları (Muhasebe, stok, satış, kalite, raporlama,denetim...)"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION2", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox3.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION3", System.Data.SqlDbType.VarChar, 500, "ERP Uygulamalari(Unity, SAP, JDE, BAAN, QAD vb.)"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION3", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox4.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION4", System.Data.SqlDbType.VarChar, 500, "Müşteri İlişkileri Yönetimi (CRM) Uygulamaları"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION4", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox5.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION5", System.Data.SqlDbType.VarChar, 500, "Bilgisayar Destekli Tasarım / Bilgisayar Destekli Üretim (CAD/CAM) Uygulamaları"));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION5", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox6.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION6", System.Data.SqlDbType.VarChar, 500, "Veri Ambarı ve Veri Madenciliği Uygulamaları "));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION6", System.Data.SqlDbType.VarChar, 500, ""));
if (CheckBox7.Checked)sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION7", System.Data.SqlDbType.VarChar, 500, TextBox36.Text));
else sqlUpdateCommand1.Parameters.Add(new System.Data.SqlClient.SqlParameter("@APPLICATION7", System.Data.SqlDbType.VarChar, 500, ""));
sqlUpdateCommand1.CommandText = "UPDATE dbo.CORP_TBL SET REP_NAME = @REP_NAME, CORP_NAME = @CORP_NAME, REP_TC_NO =" +
" @REP_TC_NO, REP_EMAIL = @REP_EMAIL, REP_TEL = @REP_TEL, REP_DUTY = @REP_DUTY, F" +
"OUND_YEAR = @FOUND_YEAR, COUNTRY = @COUNTRY, CITY = @CITY, SECTOR = @SECTOR, EMP" +
"_NUM = @EMP_NUM, CORP_ACT = @CORP_ACT, PC_NUM = @PC_NUM, INT_USER_NUM = @INT_USE" +
"R_NUM, HAVE_LAN = @HAVE_LAN, HAVE_SERVER = @HAVE_SERVER, ECOM_SER_NUM = @ECOM_SE" +
"R_NUM, OT_SER_NUM = @OT_SER_NUM, INT_CON_TYPE = @INT_CON_TYPE, APPLICATION1 = @A" +
"PPLICATION1, APPLICATION2 = @APPLICATION2, APPLICATION3 = @APPLICATION3, APPLICA" +
"TION4 = @APPLICATION4, APPLICATION5 = @APPLICATION5, APPLICATION6 = @APPLICATION" +
"6, APPLICATION7 = @APPLICATION7 WHERE CORP_ID = @CORP_ID";
sqlUpdateCommand1.Connection = sqlConnection1;
sqlUpdateCommand1.Connection.Open();
sqlUpdateCommand1.ExecuteNonQuery(); //This line gives the errorstring mySqlQuery = "UPDATE CORP_TBL SET FLAG = 1 WHERE CORP_ID=" + Page.Session.Contents["CORP_ID"].ToString();SqlCommand myCommand = new SqlCommand(mySqlQuery, sqlConnection1);
myCommand.ExecuteNonQuery();
Page.Response.Redirect("main.aspx");
}
I have written a routine to search a unique record using prepared statement. Its my first sql coding with c++.
I am not using / importing any dlls.
I connect+allocs handels , then use SQLPrepare(StmtHandle, SQLStmt,SQL_NTS); to generate a guery.
I have written bind parameters and sqlexecute +sqlFetch in a loop and loop gets executed till ESC key is pressed.
First time when I bind paramaters using SQLBindParameter it works perfect.
When loop gets executed secondtime onwards, it gives an error.
SQLState: 24000 [ODBC Client Interface]Invalid cursor state.
If I open connection, handles, and prepared starement in same loop, THEN it gives correct record without 24000 error.
I want the advantage of prepared staement. So I do not want to close and open connection and prepare statement every time.
Have I missed any step?
Where & when I should code the cursor type? Any specific libraries I need to link?
Thanks
Hello,
I am trying to get my mobilink aplication to synchronize with MS SQL Server 2000.
After getting rid of the global variable references I was using from ASA that the synchonization was failing on, it is now failing on the 8180 error.
I am not sure what it is not liking. I set the begin connection script to be blank as before it had "CREATE VARIABLE @UserID VARCHAR ( 128 )", as I found no easy way to delete the script sets with ISQL.
Microsoft says it has a hotfix for this particular error code, but I am not interested in calling their tech support line and paying to get it.
Any ideas?
The log from the Mobilink server says:
I. 03/05 11:24:07. <thread 1.4>: Working on a request
I. 03/05 11:24:07. <thread 1.4>: Synchronization request from: JM (version: 50data)
I. 03/05 11:24:07. <1.4> [JM]: Warning: [10050] ODBC: [Microsoft][ODBC SQL Server Driver][SQL Server]Changed database context to 'busler'. (ODBC State = 01000, Native error code = 5701)
I. 03/05 11:24:07. <1.4> [JM]: Warning: [10050] ODBC: [Microsoft][ODBC SQL Server Driver][SQL Server]Changed language setting to us_english. (ODBC State = 01000, Native error code = 5703)
I. 03/05 11:24:07. <1.4> [JM]: ODBC isolation set to: Read Committed
I. 03/05 11:24:08. <1.4> [JM]: COMMIT Transaction: begin_connection
E. 03/05 11:24:08. <1.4> [JM]: Error: ODBC: [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (ODBC State = 42000, Native error code = 8180)
I. 03/05 11:24:08. <1.4> [JM]: Error Context:
User Name: JM
Modified User Name: JM
Transaction: begin_synchronization
Table Name: NULL
I. 03/05 11:24:08. <1.4> [JM]: Script Version: 50data
Script:
End of Error Context
I. 03/05 11:24:08. <1.4> [JM]: Warning: [10010] No error-handling script is defined. The default action code (3000) will decide error behaviour.
I. 03/05 11:24:08. <1.4> [JM]: ROLLBACK Transaction: begin_synchronization
I. 03/05 11:24:08. <1.4> [JM]: COMMIT Transaction: end_connection
I. 03/05 11:24:08. <1.4> [JM]: Disconnected from consolidated database
I. 03/05 11:24:08. <1.4> [JM]: Synchronization failed
I am using PowerDesigner to reverse engineer a SQL 2000 database. I am getting the following error. I can't find out what this error means. Does anyone know?
Unable to list the users. [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. SQLSTATE =37000
I want to export a database from localhost anh import it to hosting server. Which version of SQL database server I need to install to have the export feture? Also I would like to know which version of SQL database server can be installed on Windows XP and Vista?
I have nightmare to restore my database to the godaddy hosting envirenment because the host server does not allow to restore the database that was backup from localhost. Please help me to solve this problem.
Thank you,
I think I have a problem with the execution plan caching in context of prepared statements. Please comment and advise.
When caching a new execution plan SQL Server apparently takes into account the actual query parameters and the current situation of the SQL Server (open transactions, transaction locks, current workload and so on). That can cause the same prepared statement to be executed verry badly with other parameters.
I am having trouble with a production system where some queries more or less suddenly start running extremly bad. The reason is an execution plan which might be optimal for some cases but is in general verry bad. Forcing a recompile of execution plans either by updating statistics or running sp_recompile solves the problem for some time. But after an unpredictable time the bad execution plan is comming back. Probably the good execution plan might also be reinstalled after som time but I cannot wait for this to happen.
The factor between good and bad execution plan is about 160 and increasing (30ms vs. 5000ms).
Please comment and advise,
Thanks
I am working on tuning the procedure cache hit ratio for my server. We haveadded 4 Gb of memory to the server, which has helped. In addition, I have runthe DBCC FREEPROCACHE, which helped for a couple of days to get the hit ratioup to about 84% (from 68%).When I use the performance monitor on the server and look at SQL Server CacheManager:Buffer Hit Ratio, I see that the Prepared SQL Plan is around 97%, butthe Procedure Plan hit ratio is down around 55%. I've done some research ondifferent tuning techniques, but can't seem to find 1. a clear definition ofthe difference between the prepared sql plan and the procedure plan and 2.other than adding memory and running dbcc freeprocache, how can I get theprocedure plan cache raised? I do know that there are some procedures thatneed to be modified to be called fully qualified (e.g. exec dbo.sp_###instead of exec sp_###), but I don't think that those will increase theprocedure plan by 30% or more.Any insight you can give would be greatly appreciated.Thanks,Michael--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200511/1
View 1 Replies View RelatedI am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedHi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
View 2 Replies View Relatedi was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
I am using ASP.NET 2.0, and am attempting to write some code to connect to the database and query a data table. The compiler is not recognizing my SqlConnection statement. It does recognize other commands. And just to make sure, I created other sql objects such as ObjectDataSource and SqlDataSource. The compiler does not find a problem with that code.
Basically the compiler is telling me that I am missing a "using" directive. The compiler is wrong though, because I am including the statement "usingSystemData" Can someone please take a look at my code below and to see if you notice what the problem might be? Note that I numbered the lines of code below. Note that I also tried putting lines 3 trhough 6 before line 2(The page directive) but that did not fix the problem The compiler still gives me the same compiler message.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request.Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'SqlConnection' could not be found (are you missing a using directive or an assembly reference?)Source Error:
Line 21: SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
1 <asp:sqldatasource runat="server"></asp:sqldatasource>
2 <%@ Page Language="C#"%>
3 using System;
4 using System.Data;
5 using System.Collections;
6 using System.Data.SqlClient;
7
8 <script runat=server>
9
10 protected void Page_Load(object o, EventArgs e)
11 {
12 ObjectDataSource dsa; // This works no problems from the compiler here
13 SqlDataSource ds; // This works no problems from the compiler
14
15 if (IsPostBack)
16 {
17 if (AuthenticateUser(txtUsername.Text,txtPassword.Text))
18 {
19 instructions.Text = "Congratulations, your authenticated!";
20 instructions.ForeColor = System.Drawing.Color.Red;
21 SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
22 String sqlStmt = "Select UserName from LogIn where UserName='" + txtUsername.Text + "' and password='" + sHashedPassword + "'";
23 }
24 else
25 {
26 instructions.Text = "Please try again!";
27 instructions.ForeColor = System.Drawing.Color.Red;
28 }
29 }
30
31 }
32
33 bool AuthenticateUser(string username, string password)
34 {
35 // Authentication code goes here
36
37 }
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
for complex views should I use "where" statements or "joins" in terms of performance?
Which one is faster?
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
hi all,
after convert from DTS to SSIS, how can i open the SQL statement? because i only saw a line in the properties of the task.
i open the DTSX in vs2005, but i can open to view the SQL statement.
in sql 2000 just double click on the SQL Task, then will popup a dialog form to show the SQL task.
please help.
thanks a lot
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
Greetings:
I know I've done this is Oracle before (can't remember the syntax) but how to do it in SQL Server?
It's powerful functionality if I can get it to work.
SELECT
If(Viewed = 'T', 'True', 'False') Viewed
FROM Messages
Thanks in advance for any and all guidance.
Ed in Tampa