Hi all,
I'd like to put together a SQL statement that will take the name of a
stored procedure as a param, and return that SP's parameters.
I'm writing a test application, and I'd like to wrte a generator to
save myself some time, but I can't seem to figure out how to get the
params from a SP. Any help would be appreciated.
Thanks in advance,
Craig
Hi all!Running the code below in SQL-analyzeer (or through dbExpress) results in NULL.As one might guess I would like the result to be 1. What is wrong? I.e, whywont the result of the SP come back to the caller?CREATE PROCEDURE test@val INTEGER OUTASSELECT @val = 1GODECLARE @val INTEGEREXEC test @valSELECT @val
View 1 Replies View RelatedI hvae a stored procedure that has this at the end of it:
BEGIN
EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, ''
END
SET NOCOUNT OFF
SELECT Something
FROM Something
Joins…..
Where Something = Something
now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure.
What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
I have an SP like this (edited for brevity):
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[TESTING_SP]
@Username MediumText,
@Password MediumText,
@UserKey int OUTPUT,
@RoleKey int OUTPUT,
@UserGroupKey int OUTPUT,
AS
BEGIN
SELECT
@UserKey = UserKey
FROM UserProfile
WHERE Username = @UserName
AND [Password] = @Password
END
I want to execute this sp in Managment Studio (MS) and see what is being returned but I'm getting this error:
Msg 201, Level 16, State 4, Procedure TESTING_SP, Line 0
Procedure 'TESTING_SP' expects parameter '@UserKey', which was not supplied.
How do I set up the output parameters and then select the values in MS for testing purposes?
Thanks a ton for helping a noob.
I am trying to run an update stored procedure that will add 1 revision to the rev field and return the Value back to my Application. My number is incrementing by 2 and not 1.
Here is my Stored Procedure
CREATE PROCEDURE dbo.sp_Update_file
@kbid big,@filename nvarchar(50),@rev big OUTPUT,@moddate datetime,@owner nvarchar(50),@author nvarchar(50)AsUPDATE KBFile
SET rev = rev + 1,filename = @filename,moddate = @moddate,owner = @owner,author = @author,@rev = (Select rev from kbfile where kbid = @kbid)WHERE kbid = @kbIDGO
Ok, still a little bit novice on stored procedures, and can't see why this one doesn't return the value I need.In this case, lessonLocation.CREATE PROCEDURE dbo.getLocation @studentId VARCHAR(20), @lessonLocation VARCHAR(50) OUTPUTASBEGIN DECLARE @errCode INT
SELECT lessonLocation FROM cmiDataModel WHERE studentId = @studentId
SET @errCode = 0 RETURN @errCode RETURN @lessonLocation
HANDLE_APPERR: SET @errCode = 1 RETURN @errCodeHANDLE_DBERR:
SET @errCode = -1 RETURN @errCodeENDGOIn the query analyzer, it returns the value in the db, but always blank when run in the .Net app.Thanks all,Zath
Hi everyone!
I am new to sql server 2005 and visual studio 2005.
I have the following simple stored procedure that checks if a user exists:
-------------------------------------------------------------------------------------------------------
ALTER PROCEDURE [dbo].[sp_Users_AlreadyExists]
@UserName varchar(256)
AS
BEGIN
SET NOCOUNT ON;
IF (EXISTS (SELECT UserName FROM dbo.Users WHERE LOWER(@UserName) = LoweredUserName ))
RETURN(1)
ELSE
RETURN(0)
END
-------------------------------------------------------------------------------------------------------
I use the following code to execute the procedure on visual studio:
-------------------------------------------------------------------------------------------------------
.
.
.
cmdobj As SqlCommand
cmdobj = New SqlCommand(sp_Users_AlreadyExists, connobj)
cmdobj.CommandType = CommandType.StoredProcedure
cmdobj.Parameters.AddWithValue("@UserName", "blablalala")
cmdobj.ExecuteNonQuery()
cmdobj.Dispose()
connobj.Close()
.
.
.
-------------------------------------------------------------------------------------------------------
I expected that cmdobj.ExecuteNonQuery() would return 1 if the user
blablab exists or 0 if the user doesnt, but it just return -1 (i think
because no row was affected)
Does anyone knows how to retrieve the value that my stored procedure returns?
Thanx in advance!
Trying to get a count on records that match search and all I'm getting is 0. I'm using the same basic sp and code elsewhere and it works fine. Anyone see anything wrong here?
Stored Procedure:CREATE PROCEDURE GetResultsCount(@searchCatalog nVarchar(100))ASRETURN ( SELECT COUNT(*) FROM CatalogWHERE itemName LIKE @searchCatalog ORitemLongDesc LIKE @searchCatalog)GO
Code: Dim connStr As SqlConnection Dim cmdResultsCount As SqlCommand Dim paramReturnCount As SqlParameter Dim intResultsCount As Integer connStr = New SqlConnection(ConfigurationSettings.AppSettings("sqlCon.ConnectionString")) cmdResultsCount = New SqlCommand("GetResultsCount", connStr) cmdResultsCount.CommandType = CommandType.StoredProcedure cmdResultsCount.Parameters.Add("@searchCatalog", Request.QueryString("search")) paramReturnCount = cmdResultsCount.Parameters.Add("ReturnValue", SqlDbType.Int) paramReturnCount.Direction = ParameterDirection.ReturnValue connStr.Open() cmdResultsCount.ExecuteNonQuery() intResultsCount = cmdResultsCount.Parameters("ReturnValue").Value connStr.Close() Me.lblResultsCount.Text = intResultsCount
Im creating an app in VB.NET that calls a stored procedure which inserts data into one of my tables. I need it to return the id it creates (autonumber) to the VB.NET Program
I keep raising an exception in VB.NET...I want to make sure my stored procedure is correct first...sadly this is my first procedure ive created.
CREATE PROCEDURE db_addtocontractInsert
@contractid int,
@playerid int,
@numyears smallint,
@year1 float(8),
@year2 float(8),
@year3 float(8),
@year4 float(8),
@year5 float(8),
@yearsremain smallint
AS
INSERT INTO db_Contracts
VALUES (@playerid,@numyears,@year1,@year2,@year3,@year4,@year5,@yearsremain)
SELECT @contractid
Return @contractid
GO
-----------------------------------------------
Any tips or corrections that need to be made would be greatly appreciated.
Thanks
Tainter
If I pass in the value of 1, the stored procedure should return the value of (.5360268), else it should return 0 for any other value(null/blank/empty/etc)
The following stored procedure is returning the value 0 if I pass in the value of 1 which is wrong. And I would need to set to 0 for any other value. I am checking only for null or empty, but the if condition should check any value (except 1) and return 0 for it.
ALTER PROCEDURE [dbo].[Calculator]
(
@ExtraCardiacArteriopathy bit
)
AS
BEGIN
declare @zarterio decimal(14,10)
[Code] .....
Hi Guys, I have a series of count statements in a Stored Procedure that return some values. What I want to do is take all of the values that have been returned by the Count statements, add them up and return the value to my .Net Code, but for some reason whenever I try I carry on getting a returned value of 0.
I have checked that the statements are in fact returning values other than 0, and I was wondering if there is something that I am doing wrong in the code below:
<code>
CREATE PROCEDURE [dbo].[UCOutstanding]
@userid int
AS
DECLARE @Num as Int
DECLARE @Num2 as Int
DECLARE @Num3 as Int
DECLARE @Num4 as Int
SET @Num = (SELECT count(*) FROM images, albums, memorial WHERE (images.active=0 AND images.albumid=albums.id AND albums.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num2 = (SELECT count(*) FROM downloads, memorial WHERE (downloads.active=0 AND downloads.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num3 = (SELECT count(*) FROM images, comments, albums, memorial WHERE (comments.active=0 AND comments.imageid=images.id AND images.albumid=albums.id AND albums.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num4 = (SELECT count(*) FROM memorial, story WHERE (story.memorialID=memorial.id and memorial.userid=@userid))
DECLARE @Total as Int
SET @Total = @Num + @Num2 + @Num3 + @Num4
Return @Total
GO
</code>
Thanks for the Help
GP
I have a Sproc shown below I want the procedure to return the New_ID value back to the calling program how can I do this.
The current approach is not working. Please help.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
.................................
ALTER PROCEDURE [dbo].[SP]
(
@Id int=NULL ,
@site_id int = null,
@Date datetime = null,
)
AS
BEGIN
Declare @New_ID varchar(10)
EXEC [dbo].[SP_GENERATEID] @New_ID output
INSERT INTO A_Table(
CODE,INT_ID,SITE_INT_ID,DATE,
)
Values
(
@New_ID,@Id,@site_id,@Date )
return @New_ID
END
Thanks
Hi All.Maybe someone in here could help on this too....Uusally I can return a value from a stored procedure without any problem.Today I ran into something I cannot figure out.Basically....what I am doing is a couple of inserts or updates depending onwhat is being passed.So in the storedproc tag, I am passing the necessary values along with 1output param. I was using an INOUT param, but I figured I would play itsafe since it wasn't working.So...in the stored procedure, I do some conditions inside transactionstatements...I don't have the code with me right now as I am home, but I figure if I cangive you the general idea, you may know what the problem is.So I have something like this...BEGIN TRANIF team_ID is nullBEGINIF target_ID > 0BEGIN--- INSERT processingSET @OutPutVariable = Scope_Identity()ENDIF target_ID < 0BEGIN--- INSERT processingSET @OutPutVariable = Scope_Identity()ENDENDIF team_ID is not nullBEGIN-- UPDATE ProcessingENDCOMMIT TRANSELECT @OutPutVariableIf I run this procedure through enterprise, i get what I need....the valueof the last inserted record. When I do it through CF, I always get 0 ORnothing at all.If I do a SELECT 100, I get a return value of 100 of course, so it seemslike it's out of scope.Any ideas?
View 5 Replies View RelatedI am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have a stored procedure below that returns a table of coaches. It worked before now it does not. It returns nothing, in vistual studio 2005 and on my asp.net webpage. But when I execute it in query analyzer with just SELECT * FROM Coaches it returns the rows. There is no error just will not return what I need. I recreated the database and stored procedure still doing the same thing. Any ideas? Would this be on my server hosting side? ALTER PROCEDURE [dbo].[GetCo]ASSELECT * FROM Coaches
View 2 Replies View RelatedHi,I'm creating a stored procedure that pulls information from 4 tables based on 1 parameter. This should be very straightforward, but for some reason it doesn't work.Given below are the relevant tables: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Project](
[ProjID] [varchar](300) NOT NULL,
[ProjType] [varchar](20) NULL,
[ProjectTitle] [varchar](max) NULL,
[ProjectDetails] [varchar](max) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](max) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK__tbl_Project__0B91BA14] PRIMARY KEY CLUSTERED
(
[ProjID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus]
-----------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Report](
[ReportName] [varchar](50) NOT NULL,
[ProjID] [varchar](300) NULL,
[DeptCode] [varchar](50) NULL,
[ProjType] [varchar](50) NULL,
[ProjectTitle] [varchar](500) NULL,
[ProjectDetails] [varchar](3000) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](50) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK_tbl_Report] PRIMARY KEY CLUSTERED
(
[ReportName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus]
--------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectStatus](
[ProjectStatusID] [int] IDENTITY(1,1) NOT NULL,
[ProjectStatus] [varchar](max) NULL,
CONSTRAINT [PK__tbl_ProjectStatu__023D5A04] PRIMARY KEY CLUSTERED
(
[ProjectStatusID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
-----------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectManager](
[ProjectManagerID] [int] IDENTITY(1,1) NOT NULL,
[FName] [varchar](50) NULL,
[LName] [varchar](50) NULL,
[Inactive] [int] NULL,
CONSTRAINT [PK__tbl_ProjectManag__7D78A4E7] PRIMARY KEY CLUSTERED
(
[ProjectManagerID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
And here is the stored procedure that I wrote (doesn't return results): SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetReportQuery]
(
@ReportName varchar(100)
)
AS
BEGIN
SET
NOCOUNT ON
IF @ReportName IS NULL
BEGIN
RETURN -1
END
ELSE
BEGIN
DECLARE @DeptCode varchar(50), @ProjID varchar(50)
SELECT @DeptCode = DeptCode FROM tbl_Report WHERE ReportName = @ReportName
SET @ProjID = @DeptCode + '-' + '%'
SELECT P.ProjID, P.ProjType, P.ProjectTitle, P.ProjectDetails, M.FName, M.LName, P.DateRequested, P.DueDate, S.ProjectStatus
FROM tbl_Project P, tbl_ProjectManager M, tbl_ProjectStatus S
WHERE ((P.ProjID = (SELECT ProjID FROM tbl_Report WHERE ((ReportName = @ReportName))))
AND (P.ProjectDetails = (SELECT ProjectDetails FROM tbl_Report WHERE ReportName = @ReportName) OR P.ProjectDetails IS NULL)
AND (M.FName = (SELECT FName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.FName IS NULL)
AND (M.LName = (SELECT LName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.LName IS NULL)
AND (P.DateRequested = (SELECT DateRequested FROM tbl_Report WHERE ReportName = @ReportName) OR P.DateRequested IS NULL)
AND (P.DueDate = (SELECT DueDate FROM tbl_Report WHERE ReportName = @ReportName) OR P.DueDate IS NULL)
AND (S.ProjectStatus = (SELECT ProjectStatusID FROM tbl_Report WHERE ReportName = @ReportName) OR S.ProjectStatus IS NULL)
)
END
END Can someone see what's wrong? Thanks.
Hi,
I created a temporary table inside a stored procedure called TmpCursor and the last time I include this..
Select * from #TmpSummary
GO
Inside my web page, I have the following code...
QrySummary = "Exec TmpCursor"
Set rsSummary = Server.CreateObject("ADODB.RecordSet")
rsSummary.Open QrySummary, cnCentral
cnCentral is my sqlconnection string..
This is the error I got when viewing the page
Error Type:
ADODB.Recordset (0x800A0E78)
Operation is not allowed when the object is closed.
BTW, the stored procedure works fine in Query Analyzer.
TIA
Hi,
How to return values from stored procedures?? I have a value whose variable would be set thru this sp and it should return this value. How to do this?
Thanks,
Anyone know how to return a sql command from a sql server stored procedure using asp.net c# and sql server 2000?I'm trying to debug the stored proc and thought the easiest way would be to return the insert command and debug it in the query analyzer.Thanks.Doug.
View 2 Replies View RelatedHELP HELP HELP!!
I have two questions.
I'm using VB 6.0 with ADO to SQL 7.0. My stored procedure works fine with Query Analyzer. I pass one parameter.
sp_test "1234"
And I get a recordset returned.
The stored procedure looks like this:
CREATE PROCEDURE sp_test
@facility_key varchar(255) = null
AS
/*DECLARE @sql1 varchar(255)*/
SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key
/*IF @facility_key <> null
PRINT "0"
BEGIN
SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key
END*/
When I uncomment the commented lines, I can still get a recordset returned using the query analyzer. And I get the same recordset returned when I use VB ADO and leave the stored proc lines commented out. However, when I call the procedure using the same VB code with the stored proc lines uncommented, I get -1 returned for rs.recordcount:
Private Sub Main_Click()
On Error GoTo Err_Main
Dim lsFacility As String
Dim lsReportName As String
Dim rs As ADODB.Recordset
Dim cmd As ADODB.Command
Dim gconn As ADODB.Connection
Dim param_facility_key As ADODB.Parameter
Dim gConnString As String
gConnString = "Trusted_Connection=Yes;UID=sa;PWD=yoyo;DATABASE=y ada;SERVER=ya;Network=dbnmpntw;Address=ya;DRIVER={ SQL Server};DSN=''"
Set gconn = New ADODB.Connection
Set rs = New ADODB.Recordset
Set cmd = New ADODB.Command
gconn.Open gConnString
cmd.Parameters.Refresh
lsFacility = "1234"
Set param_facility_key = cmd.CreateParameter("facility_key", adVarChar, adParamInput, 255)
cmd.Parameters.Append param_facility_key
param_facility_key.Value = lsFacility
cmd.CommandType = adCmdStoredProc
cmd.CommandText = "sp_reimbursement_report_test"
cmd.Name = "sp_reimbursement_report_test"
Set cmd.ActiveConnection = gconn
rs.Open cmd, , adOpenKeyset, adLockOptimistic
MsgBox rs.RecordCount
Exit_Main:
Screen.MousePointer = vbNormal
gconn.Close
rs.Close
Exit Sub
Err_Main:
Screen.MousePointer = vbNormal
MsgBox "Error " & Err.Number & " has occurred: " & Err.Description
End Sub
Here are my questions:
1. Why don't I get a recordset returned to VB if I have anything (the commented lines) except a simple SELECT statement in the stored proc.
2. Why must I do a Print "0" (or anything) command in the stored procedure within the IF statement to see a recordset return?
TIA for any help you can give....this one has been keeping me up....and my company down.
JWB
Dear all,
I have a big problem in using SQL Server stored procedures:
When I have two select statement in the same procedure, the first one will use for returning specific information for the second one to select appropiate result to the client, but the stored procedure just return the first select statement recordset! What can I do? (I use VB Data Environment to access the stored procedures)
This is a strange issue I'm encountering. I have a websphere application that calls a basic Stored Procedure in SQL Server 2000. The SP works fine. Now, if I create a TEMP table in the SP, I no longer get a resultset. No results are returned by the websphere. Even if I do not use the temp table... that is, I just create the temp table like so:
SELECT region_code,
OperGroup_Code,
country_name,
MajorGroup_Name,
RptgEntity_Name,
shell_code,
CRC,
' ' as right_type
INTO #tmpTShell FROM TShell WHERE 1=0
But I then grab my records using the query that works (querying another table), I still get NULL for records returned. Only when I comment out the above TEMP table creation do I get the results back in websphere. Another strange thing is that this works fin in SQL analyzer. WRegardless of whether I have the temp table creation commented out or not, it always works in the Query Analyzer whe I call the SP. It just seems to effect WebSphere or my java code in that it returns null if I create the temp table.
Has anyone ever experienced anthying like this? Any help would be greatly appreciated!
Thanks.
I can't even think how I would go about beginning to solve this problem, so any tips/pointers would help immensely.
I'm running a query that builds a time line of a process using messages in a table called Event. The Event table is joined with a table called Charge_Info based on N_Charge, the charge number. It builds the time line by looking in the Message field for various text strings that signify a specific point has been reached in the process and builds a record for each charge number with data from N_Charge and timestamps from the events table.
The problem I have is that there aren't records for every event in the Event table, ie, for every charge that doesn't have a "Heating Complete" event, the returned recordset has no mention of that charge. The system recording these events is pretty much crap, but there's nothing to be done about that right now. What I want to happen is for the query to return every record in N_Charge and a null string or NULL in place of the non-existing events.
The stored procedure is pasted below. I pass the dates I want and select from the Event table into a temporary table and then do the join/text search on that table. It helped performance tremendously compared to the text search searching all 400,000+ records in the Event table and then doing the date select.
Thanks for any help in advance,
TimC
SELECT EVENT.Time_Stamp, EVENT.N_CHARGE, EVENT.Message
INTO #EVENT_FILTERED
FROM EVENT
WHERE (EVENT.TIME_STAMP >= @StartDate) AND (EVENT.TIME_STAMP < @EndDate)
SELECT CHARGE_INFO.TIME_STAMP, CHARGE_INFO.N_CHARGE, CHARGE_INFO.BASE,
CHARGE_INFO.N_RECIPE, CHARGE_INFO.N_FCE, CHARGE_INFO.N_CH,
CHARGE_INFO.HEIGHT, CHARGE_INFO.CREW_EOC, CHARGE_INFO.CREW_SOC,
CHARGE_INFO.TIME_START, CHARGE_INFO.TIME_FCE_SET,
CHARGE_INFO.TIME_FCE_IGNITED, CHARGE_INFO.TIME_FCE_REMOVED,
CHARGE_INFO.TIME_CH_SET, CHARGE_INFO.TIME_CH_REMOVED,
CHARGE_INFO.WEIGHT, CHARGE_INFO.TIME_POST_PRG_COMPLETE,
EVENT.TIME_STAMP AS IC_Set,
EVENT_1.TIME_STAMP AS Cycle_Started,
EVENT_2.TIME_STAMP AS Leak_Test_Done,
EVENT_3.TIME_STAMP AS End_N2_PrePurge,
EVENT_4.TIME_STAMP AS Heating_Complete,
EVENT_5.TIME_STAMP AS Split_Temp_Met,
EVENT_6.TIME_STAMP AS End_N2_Final_Purge,
EVENT_7.TIME_STAMP AS Inner_Cover_Removed,
EVENT_8.TIME_STAMP AS Cycle_Complete,
EVENT_9.TIME_STAMP AS Post_Purge_Time_Met
FROM dbo.CHARGE_INFO CHARGE_INFO LEFT OUTER JOIN
#EVENT_FILTERED EVENT_9 ON CHARGE_INFO.N_CHARGE = EVENT_9.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_7 ON CHARGE_INFO.N_CHARGE = EVENT_7.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_6 ON CHARGE_INFO.N_CHARGE = EVENT_6.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_8 ON CHARGE_INFO.N_CHARGE = EVENT_8.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_5 ON CHARGE_INFO.N_CHARGE = EVENT_5.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_3 ON CHARGE_INFO.N_CHARGE = EVENT_3.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_1 ON CHARGE_INFO.N_CHARGE = EVENT_1.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_4 ON CHARGE_INFO.N_CHARGE = EVENT_4.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_2 ON CHARGE_INFO.N_CHARGE = EVENT_2.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT ON CHARGE_INFO.N_CHARGE = EVENT.N_CHARGE
WHERE (EVENT.MESSAGE LIKE '%Inner Cover Set%') AND
(EVENT_1.MESSAGE LIKE '%Cycle Started%') AND
(EVENT_2.MESSAGE LIKE '%Leak Test Done%') AND
(EVENT_3.MESSAGE LIKE '%End of N2 PrePurge%') AND
(EVENT_4.MESSAGE LIKE '%Heating Complete%') AND
(EVENT_5.MESSAGE LIKE '%Split Temp Met%') AND
(EVENT_6.MESSAGE LIKE '%End N2 Final%') AND
(EVENT_7.MESSAGE LIKE '%Inner Cover Removed%') AND
(EVENT_8.MESSAGE LIKE '%Cycle Complete%') AND
(EVENT_9.MESSAGE LIKE '%Post Purge Time Met%') AND
(CHARGE_INFO.TIME_STAMP >= @StartDate) AND
(CHARGE_INFO.TIME_STAMP < @EndDate)
ORDER BY CHARGE_INFO.BASE, CHARGE_INFO.TIME_STAMP DESC
How to return an entire table from stored procedure ????
thanx in advance
The stored procedure I created returns all records from the table if no parameters are passed, as expected. When I pass in the only parameter, I get 0 records returned when there should be one or more returned. I'm sure it's something simple in my syntax, but I don't see it.
This call returns all records:
exec webservices_BENEFICIAL_USES_DM_SELECT
This call returns 0 records, when it should return 1:
exec webservices_BENEFICIAL_USES_DM_SELECT @DISPOSAL_AREA_NAME='Cell 8'
Here is the stored procedure:
ALTER PROCEDURE [dbo].[webservices_BENEFICIAL_USES_DM_SELECT]
-- Add the parameters for the stored procedure here
@DISPOSAL_AREA_NAME DISPOSAL_AREA_NAME_TYPE = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @DISPOSAL_AREA_NAME IS NULL
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
END
ELSE
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
WHEREDISPOSAL_AREA_NAME = '@DISPOSAL_AREA_NAME'
END
END
ALTER PROCEDURE [dbo].[getFavoriteList]
as
begin
SET NOCOUNT ON
select manufacturer_name from dbo.Favorite_list
end
execute getFavoriteList
It reruns infinite data and finally i got message as
Msg 217, Level 16, State 1, Procedure getFavoriteList, Line 15
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
I am trying to return the dataset from stored procedure.
Hi All. My question is this. I have a complex stored procedure in SQLServer which works fine when I run it in Query Analyzer. However, whenI call it within my ASP script, it returns nothing, and sometimes locksup. If I change my script to call other existing stored procedures itworks fine. It's just with this particular stored proc. I have triedvarious DB calls in ASP, such as opening the recordset through an ADOconnection and through the Command object but to no avail. Here is mySQL:SET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS OFFGOALTER PROCEDURE dbo.sp_getProfessionalsByTypeID@typeID intASdeclare @catID intdeclare @userID intdeclare @strUserName varchar(100)declare @strFirstName varchar(100)declare @strLastName varchar(100)declare @strTypeName varchar(100)declare @strCategoryName varchar(100)declare @strPictureURL varchar(100)declare @sql varchar(1000)declare @a varchar(100)declare @b varchar(100)declare @c varchar(100)declare @d varchar(100)beginset @a=''set @b=''set @c=''set @d=''--Create Temp TableCREATE TABLE #QueryResult (nCatID int, nTypeID int, nUserID int,strUserName varchar(100), strFirstName varchar(100), strLastNamevarchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100))--Search QuerybeginINSERT #QueryResultSELECTdbo.tbl_musician_type.nCatID, dbo.tbl_musician_type.nTypeID,dbo.tbl_users.nUserID, dbo.tbl_users.strUserName,dbo.tbl_users.strLastName,dbo.tbl_users.strFirstName,dbo.tbl_musician_type.strTypeName, dbo.tbl_category.strCategoryName,dbo.tbl_professionals.strPictureURLFROMdbo.tbl_musician_type INNER JOINdbo.tbl_category ON dbo.tbl_musician_type.nCatID= dbo.tbl_category.nCategoryID INNER JOINdbo.tbl_profile ONdbo.tbl_musician_type.nTypeID = dbo.tbl_profile.nTypeID INNER JOINdbo.tbl_users ON dbo.tbl_profile.nUserID =dbo.tbl_users.nUserID LEFT OUTER JOINdbo.tbl_professionals ON dbo.tbl_users.nUserID= dbo.tbl_professionals.nUserIDWHEREdbo.tbl_musician_type.nTypeID = @typeIDend--Create Temp TableCREATE TABLE #QueryResult2 (ID int IDENTITY,nCatID int, nTypeID int,nUserID int, strUserName varchar(100), strFirstName varchar(100),strLastName varchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100), strArtist varchar(100),strAlbumTitle varchar(100), strRecordLabel varchar(100), strYearvarchar(100))--Now Declare the Cursor for Speakersdeclare cur_musicians CURSOR FOR--Combined Results Groupedselect distinct nCatID, nTypeID, nUserID, strUserName, strLastName,strFirstName, strTypeName, strCategoryName, strPictureURLFrom #QueryResultopen cur_musiciansfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURL--Loop Through Cursorwhile @@FETCH_STATUS = 0beginSELECT TOP 1 @a = strArtist, @b=strAlbumTitle,@c=strRecordLabel, @d=strYearFROM dbo.tbl_profile_discogwhere nTypeID = @typeID AND nCategoryID = @catID AND nUserID =@userIDinsert #QueryResult2select @catID as nCatID, @typeID as nTypeID, @userID as nUserID,@strUserName as strUserName, @strLastName as strLastName, @strFirstNamestrFirstName, @strTypeName as strTypeName, @strCategoryName asstrCategoryName, @strPictureURL as strPictureURL, @a ashighlightArtist, @b as highlightAlbumTitle, @c as highlightRecordLabel,@d as highlightYearfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURLset @a = ''set @b=''set @c=''set @d=''endselect * from #QueryResult2 TI--Clean Upclose cur_musiciansdeallocate cur_musiciansdrop table #QueryResultdrop table #QueryResult2endGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO
View 5 Replies View RelatedHi Using Following Stored Procedure,
Which always returns Null,
What s the error,
CREATE PROCEDURE prLoginAuth
(
@pStrUserName varchar(50),
@pStrPassword varchar(50),
@pOutput Varchar(20) Output
)
AS
Declare @V_Facilities Varchar(50)
SELECT Facilities=@V_Facilities From UserLoginFacilities where LoginID=(Select LoginID From UserLogin where LoginName=@pStrUserName and Password=@pStrPassword)
If(@V_Facilities=null)
Set @pOutput = @V_Facilities
Return @pOutput;
Else
Set @pOutput = @V_Facilities
Return @pOutput;
GO
Anyone correct this query , I want return the output from this procedure
Thanx in advance
Selva.R
Hi
I am currently trying to write a number of processe's to keep track of what information is held in my SSIS package. The package I have created is rather large and it would prove a long labourious process to look through every task to see what stored procedure has been used.
What I wanted to do was write a stored procedure in SQL Server 2005 that pick's up each package name and checks for any stored procedures used and returns the names of these stored procedures and any other relevant information i.e required variables.
So far I have managed to create a stored procedure that picks up the name(s) of the packages but I am stuck after this.
Declare @Filename varchar(1000)
Declare @cmd varchar(1000)
Create table #dir (Filename varchar(1000))
Insert #dir
Exec master..xp_cmdshell 'dir /B C:DevelopmentSumColumnSumColumn*.dtsx'
delete #dir where Filename is null or Filename like '%not found%'
Select @Filename = ''
While @Filename < (select max(Filename) from #dir)
drop table #dir
Any help would be appreciated.
Thanks
If stored procedure A EXECUTEs stored procedure B, and stored procedure B does a select statement which returns a dataset, how does stored procedure A access that data ?
View 12 Replies View RelatedI am having probelms trying to get a stored proedure to return an output value.
The outline of the specific request is that I supply a varchar which is unique within a set of tables (tables named in another table). I want to search each of the tables until I find the one that has the value and when found return the GUID of the row and the table name.
I have not been successful in getting the value of the GUID (an int) to be returned. If I run in debug and stop after the SQL call I can see the value in the SQL output parameter but it does not appear in the variable I specified in the SQL parameter setting. I am probably doing something simplly wrong but cannot see it.
Please help if you can.
Regards, Major (that is my Christian name ;-)
The code files are copied below.
Web app code
sing System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
using EFormsLIB;
public partial class _Default : System.Web.UI.Page
{
String gstrConnectionString; // Connection to the SQL database, set in the config file to allow for changes while testing and running
protected void Page_Load(object sender, EventArgs e)
{
// Read the connection string from the config file
EFormsRoutines r = new EFormsRoutines();
gstrConnectionString = r.ReadConfigString("EForms21ConnectionString", "");
}
protected void btnCancel_Click(object sender, EventArgs e)
{
this.Dispose();
}
protected void btnGet_Click(object sender, EventArgs e)
{
// Get GUID for the form using UniqueDocID as the BlueWare ID.
int intGUID = -1;
SqlConnection SqlCDB = new SqlConnection(gstrConnectionString);
SqlCommand SqlCmd = SqlCDB.CreateCommand();
SqlCmd.CommandText = "GetGUIDfromBWID";
SqlCmd.CommandType = CommandType.StoredProcedure;
SqlParameter BWIDParameter = new SqlParameter();
BWIDParameter.ParameterName = "@BWID";
BWIDParameter.SqlDbType = SqlDbType.VarChar;
BWIDParameter.Size = 30;
BWIDParameter.Direction = ParameterDirection.Input;
BWIDParameter.Value = TextBox1.Text;
SqlCmd.Parameters.Add(BWIDParameter);
SqlParameter GUIDParameter = new SqlParameter();
GUIDParameter.ParameterName = "@GUID";
GUIDParameter.SqlDbType = SqlDbType.Int;
GUIDParameter.Direction = ParameterDirection.Output;
GUIDParameter.Value = intGUID;
SqlCmd.Parameters.Add(GUIDParameter);
SqlCmd.Connection.Open();
int ret1 = SqlCmd.ExecuteNonQuery();
SqlCmd.Connection.Close();
Label1.Text = intGUID.ToString();
}
}
web app aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:Label ID="Label1" runat="server" Style="z-index: 100; left: 48px; position: absolute;
top: 24px" Text="Label"></asp:Label>
<asp:Button ID="btnGet" runat="server" OnClick="btnGet_Click" Text="Get" style="z-index: 101; left: 8px; position: absolute; top: 48px" />
<asp:Button ID="btnCancel" runat="server" OnClick="btnCancel_Click" Text="Cancel" style="z-index: 102; left: 64px; position: absolute; top: 48px" />
<asp:TextBox ID="TextBox1" runat="server" Style="z-index: 103; left: 48px; position: absolute;
top: 0px" Width="48px"></asp:TextBox>
<asp:Label ID="Label2" runat="server" Style="z-index: 104; left: 0px; position: absolute;
top: 0px" Text="BWID"></asp:Label>
<asp:Label ID="Label3" runat="server" Style="z-index: 106; left: 0px; position: absolute;
top: 24px" Text="GUID"></asp:Label>
</div>
</form>
</body>
</html>
SQL procedure
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[GetGUIDfromBWID] @BWID varchar(30), @GUID int outputASBEGIN SET NOCOUNT ON;
declare formscursor cursor for select formname from forms for read only declare @found int, @formname varchar(30)
select @found = 0
open formscursor fetch next from formscursor into @formname while (@found = 0) begin if (@@fetch_status <> 0) select @found = 2 else begin if @formname = 'UAT040' begin if (select count(*) from UAT040 where BWID = @BWID) =1 begin select @GUID = (select GUID from UAT040 where BWID = @BWID) select @found = 1 end end else if @formname = 'GEN001' begin if (select count(*) from GEN001 where BWID = @BWID) =1 begin select @GUID = (select GUID from GEN001 where BWID = @BWID) select @found = 1 end end else if @formname = 'GEN002' begin if (select count(*) from GEN002 where BWID = @BWID) =1 begin select @GUID = (select GUID from GEN002 where BWID = @BWID) select @found = 1 end end else if @formname = 'CFT001' begin if (select count(*) from CFT001 where BWID = @BWID) =1 begin select @GUID = (select GUID from CFT001 where BWID = @BWID) select @found = 1 end end fetch next from formscursor into @formname end end deallocate formscursor if @found = 2 select @GUID = -16
select @GUIDend
Hi, I have this output, @RegisterFlag int OUTPUTand I have a transaction going on, so my code (I just put some relevant code here) is: 1 BEGIN TRAN
2 SELECT @getDealername = OrgName FROM Org WHERE OrgName = @DealerName
3 If @getDealername is null
4
5 ELSE
6 BEGIN
7 set @RegisterFlag = 2
8 ROLLBACK TRAN
9 RETURN
10 END
11
12 COMMIT TRAN
13 set @RegisterFlag = 1
The problem I am facing now is I couldn't get @RegisterFlag = 2 return back to my asp.net code when it reached line 7, instead I got this error mesg:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION
statement is missing. Previous count = 1, current count = 0. How do I fix this? Many big thanks.
Hi,I have a stored procedure which returns an integer indicating whether the operation has succeeded or failed. It does this by calling set @returnvalue = (0 or 1) then select @returnvalue as returnvalue in the stored procedure code. When I run the stored procedure, inputting a set of parameters as it expects, it does what it's supposed to do and outputs a table with a single row and a single column, called returnvalue, which has a value of either 1 or 0. When I run the stored procedure through a function in asp, using the exact same set of parameters, output the results as a data set and try and convert the return as an integer I get the following error: "Object Cannot be cast from DBNull from other types"The conversion code is ..return Convert.ToInt32(ds.Tables[0].Rows[0]["returnvalue"]);And if I change "returnvalue" to anything else (like "wibble" for example) then I get a different error telling me it can't find the column named "wibble". So the dataset definitely contains a table with a column in it called returnvalue, as you expect. But it's value is, apparently, DBNull instead of an integer.How come this works when called directly through SQL and fails when called through ASP? Can anyone help? This is really doing my head in!Cheers,Matt
View 2 Replies View Related