Does anyone know what status 8388704 represents? The table in question is a heap. There are two of these on the table, and they don't show up in EM but are listed in sp_help. They also have weird names associated with their entries in sysindexes "_WA_Sys_CUST_PO_NBR_0F975522" and "_WA_Sys_ORD_STUS_CODE_0F975522"... I've searched everywhere... HELP!
Thanks
When you have a table with no indexes you can see the table name in sysindexes and the relevant data in the rest of the fields with an indid of 0. I understand this bit.....but when you have created an index and then you delete it again.... the row in sysindexes just has the tablename and no other data?
Weird or by design?
Cheers timmers
I have read at this location--
http://www.swynk.com/friends/achigrik/RowCount.asp
that it is better to use sysindexes to get a rowcount.
Can I be assured that this is always up-to-date?
How can I use sysindexes table to determine the indexes, tables being indexed, and the columns to which the indexes belong.
Thanks
It seems my sysindexes table is inaccurate on a nonclustered index. In my case the rowcount (rows and rowcnt) do not match the actual rowcount of the table. The command UPDATE STATISTICS doesn't change the rows or rowcount, adding 'FULSLCAN' won't budge rowcount either.
After I did a dbcc reindex, the number of rows matched, however, upon adding rows in the table both rows and rowcount are out of sync again.
It's a fairly straightforward table, no triggers, no computed fields, only integer, datetime, varchar and bigint columns. There's a clustered index on a bigint column and a nonclustered index on a integer column.
dbcc show_statistics show that the nonclustered index is updated and it's rows and rows sampled match the number of rows in the table (not in the sysindexes-table).
I'd like to know if I'm chasing ghosts here or if there's something very wrong here. What could be causing the counts being inaccurate? Anyone who could shed some light?
i hav a table, Test1, with a clustered index and two non clustered index defined on it.
When i use sp_help Test1, the CI and non clustered index are listed along with the column names.
when i query the sysindex table (for id = object_id(Test1))
i can see entries like _WA_Sys_<<ColumnName>>_3D5EEB29.
what are these entries? are they indexes? if yes, how these entries are created and what is the significance of these entries.
Pl discuss.
Thanks.
hi all
Is there any way to remove inconsistencies from sysindexes table. I have already used all the options of the checkdb as well as checktable but invain.
thanks in advance
Hi,
Please note that I'm having the below problem:
1- when i run "DBcc CheckDB ('DBName') with all_errormsgs"
I Get:
Could not read and latch page (1:173) with latch type SH. sysindexes failed.
2- then :
select * from sysindexes
Gave me:
I/O error (torn page) detected during read at offset 0x0000000015a000 in file 'C:DataDatabasesOld_Data.MDF'.
Connection Broken
3- dbcc checktable ('sysindexes')
Could not read and latch page (1:173) with latch type SH. sysindexes failed.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 2, index ID 0, page (1:173). Test (IS_ON (BUF_IOERR, bp->bstat) && bp->berrcode) failed. Values are 2057 and -1.CHECKTABLE found 0 allocation errors and 1 consistency errors in table 'sysindexes' (object ID 2).
Forth of all, I can't use a backup because it is old.
Can i copy system tables from old database to the current one that we are using...
I tried to export and import data from this corrupted database but it would give me errors...
Is there anyway that i can adjust this database.
Please Help Urgently....
I need to delete couple or rows from sysindexes, the code worked fine in sql 2000, but 2005 does not support direct update in sys tables any more, what's the work around? thanks.
USE [dbname]
DELETE FROM sysindexes WHERE name LIKE '_va_Sys_%'
EXEC sp_configure 'allow updates', '0'
RECONFIGURE
I am trying to attach a database that was created on another server. I believe the database was created using SQL Server Management Studio Express 2005. Now, I have successfully attached the database in my development environment, which is using SQL Server Management Studio Express 2005.
However, when I tried to attach the database onto our production server, which is SQL Server 2000 I received the error:
Error 602:Could not find row in sysindexes for database ID 18, object ID 1, index ID 1. Run DBCC CheckTable on sysindexes.
In my development environment, I ran DBCC CheckDB on the source database and no errors are returned.
I aslo checked the compatibility level under the database properties and it shows: Sql Server 2000 (80)
So, this should not be a version incompatibility issue. What is causing the attach to fail on SQL Server 2000?
Thanks for any help.
Does nayone know how to identify the tables fields from the keys col. in the
sysindexes table?
TIA,
Philip
Can anyone explain why when I look at table using enterprise manager, highlight a table, all tasks, maanage indexes why only 1 index appears and when I look at the same table in sysindexes is says that there are 8 indexes.
This is the sql code I executed:
select object_name(id), indid from sysindexes
where object_name(id) = 'tbh_matter_summ'
Is it possible that there is a problem with the database?
TIA,
Philip
Hi,
I got the data currption after run CheckDB and it cannot be repaired:
-------------
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (1:273) with latch type SH. sysindexes failed.
Server: Msg 8944, Level 16, State 1, Line 1
Table Corrupt: Object ID 2, index ID 0, page (1:273), row 9. Test (columnOffsets->offTbl [varColumnNumber] <= (nextRec - pRec)) failed. Values are 331 and 120.
DBCC results for 'abtrepository'.
CHECKDB found 0 allocation errors and 1 consistency errors in table 'sysindexes' (object ID 2).
CHECKDB found 0 allocation errors and 1 consistency errors in database 'abtrepository'.
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (abtrepository repair_fast).
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
--------------
Please help!
Linda
Please help
1. my database can not truncate log and I use this command
BACKUP LOG IMVDB2 WITH NO_LOG
and after that I received result as below
->The log was not truncated because records at the beginning of the log are pending replication. Ensure the Log Reader Agent is running or use sp_repldone to mark transactions as distributed.
2. so I drop all replicate but it's still return same error
so I try to run
DBCC CHECKDB --> but no error meesage
DBCC CHECKALLOC --> but no error meesage
DBCC CHECKTABLE ('sysindexes') --> but no error meesage
but I tried to run
3. DBCC PAGE (IMVDB2, 1, 13015, 3) i recieved
-->Server: Msg 2591, Level 16, State 14, Line 1
Could not find row in sysindexes with index ID 2 for table 'object ID (334220541)'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
so what can I do the next to fix this problem, please help[/b]
I have some errors in my DB, we do have a backup plan in place, but the person who put it in place is no longer here. It's all automated and running, the problem is , we do A LOT of transactions a day, and the error has been in the db since 9/20(2.5 weeks) when someone shut the power off accidentally. So i'm reluctant to do a backup, mainly since i have NO idea how to do one, we do full and incremental, full on weekend, incremental weeknights.
below is the biggest problem SYSINDEXES :(. a few other tables had problems but DBCC with repair_allow_data_loss has fixed those with 'hardly' any data loss. What can I do here?
THanks in advance
Server: Msg 8909, Level 16, State 1, Line 1
Table error: Object ID 2, index ID 0, page ID (1:4917). The PageId in the page header = (1:4925).
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 2, index ID 255: Page (1:4917) could not be processed. See other errors for details.
DBCC results for 'sysindexes'.
There are 485 rows in 30 pages for object 'sysindexes'.
CHECKTABLE found 0 allocation errors and 2 consistency errors in table 'sysindexes' (object ID 2).
I need to write a script which will respond differently if a table's index forces uniqueness.
I am using SQL 7.0 and I am using the [sysindexes] table of my database to examine those indexes. I am using the [id] field from the [sysobjects] table for the table I am examining and I am using that [id] field to find like-valued [id] fields in the [sysindexes] table.
My problem is that I can't seem to determine, from an examination of the [sysindexes] table, whether, or not, an index is unique.
When adding an index, and checking the unique property of that index, the values that I get in the [status] field of [sysindexes] are different from the values which are supposed to show, at least according to the sysindexes (T-SQL) entry in SQL Server Books Online.
For instance, I have a table which combines two text fields which comprise the only key on a table. The unique and clustered boxes are checked in the index setup screen. When I look in the [sysindexes] table, the value in the [status] field is 2113554, which is not a value I see in the books online page. According to my books online page, a unique index should have a value of 2 in the [status] field and a clustered index should have a value of 16 in the [status] field. My assumption is that I should see a value of 18 in that [status] field, not 2113554.
I looks like the books online entry might be out-of-date because the field that is labeled [reserved1] in my books online page, is labeled [StatVersion] in my actual [sysindexes] table. That [StatVersion] field looks suspiciously like a Status Version field, possibly indicating that the Status field has undergone some sort of version revision?
Is anyone familiar with this stuff?
Thanks.
Ken
indid =1 works, is this the correct way
View 3 Replies View RelatedThe sysindexes table of my database seems to be messedup and I cannot backup my database.
Here is the error
17052 :
Table error: IAM page (1:278538) (object ID 2, index ID 255) is out of the range of this database.
FYI Object ID 2 is the sysindexes table.
Thanks,
kellie
WHen researching an index name problem, I found duplicate index names in sysindexes, referencing the same table. I notice that one of the indexes has a status = 2097154 and a indid of 2 while the other has a status of 0 and a indid of 0. I believe these are duplicates. Anybody have an idea if these really are and what the status and indid fields mean?
View 1 Replies View RelatedA few days ago a sproc stopped working, only noticed it this morning, when checking information to see what's up I get this:
Server: Msg 644, Level 21, State 1, Procedure uspV2InventoryFetch, Line 83
Could not find the index entry for RID '45574f44523738313834202020202020202020202020202020202020202020' in index page (1:11690152), index ID 2, database 'ASOS'.
Connection Broken
I've treid DBCC CHECKDBing all related tables and everything else. Even tried dbreindexing a couple of them too, everything reports as correct. When I looked further at the problem I spotted "index ID 2" in there, on checking this out in sysindexes it seems that the name field of sysindexes where id = 2 is SYSINDEXES and TSYSINDEXES.
I can't seem to do a DBB DBRECINDEX against a system table.
Any help appreciated.
John
hi all,i was using the system tables namely sysindexes and sysobjects in sql server 2000. But now sql server 2005 is using instead of sql server 2000. Since am using sysindexes and sysobjects, too much time is taking for the execution in sql server 2005. So I need to change the query suitable for sql server 2005.I have read in msdn that the system tables are replaced with corresponding catalog views in sql server 2005. The catelog view for sysobjects is sys.objects. plz check the link http://technet.microsoft.com/en-us/library/ms187997.aspxCould anyone please tell me how to replace the sysindexes and sysobjects in the query without rewriting the query too much. If I can replacesysobjects with just sys.objects, then it will be very helpful. Is it possible? And what about sysindexes. Any help anyone could give would be greatly appreciated!
View 8 Replies View RelatedHi Experts,
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
Can anyone suggest how to solve this issue.
Returning "completed" when status = 1 and "not completed when status = 0
View 3 Replies View RelatedSQL7, sp3, NT4...
Unless I grant a developer "system admin" role, they are unable to see whether or not any job *not* owned by themselves is running?
EX: Developer A can't see whether Developer B's job is executing? Why? I've granted them both db_owner in msdb, and all permissions possible in msdb. Is there an extended sp I can look for?
Thanks,
Hi Gurus,
can any one help me to get the job status of a sql job.
My requirement is as under
ordinary user (not SA) will query pass job name as argument to stored procedure and sp has to give me the job status.
Thanks in advance
I have a table with columns c1, c2, c3, c4.if all nulls or blanks. Status = 0if c1 assigned but no c2, c3, and c4, then status = 1if c2 assigned but no c3 and c4, then status = 2if c3 .. then ..if c4 .. then ..I want to have one SQL to get the status like (ignored checking forblanks here for demo)SELECT Status = (if not c4 is null then 4else not c3 is null then 3else not c2 is null then 2else not c1 is null then 1else 0)FROM mytable.Thought of using CASE ... WHEN ... but it is only on one colum.Any better idea.ThanksJohn
View 1 Replies View RelatedIn SQL 2000, go to Management, than Jobs, you will see a list of all jobs and their running status. I would like to programmatically display the same on my web page. I can call sysjobs table to get the jobs and use sysjobschedules to determine whether it's been scheduled or not. Then use sysjobhistory to obtain their running history. But how and where do I get the Next Run Date information? Is this calculated or stored somewhere?Can anyone give me some help on how to work with sysjobs, sysjobschedules, and sysjobhistory tables? All I am trying to do is to build a web-based app that does the same thing as the Enterprise Manager is doing - create and schedule a job, and monitor the job status.Thanks a lot!Penn
View 1 Replies View RelatedHi all - am having trouble working out what would be the best way to do this (most efficient)I have written an order, despatch and accounts system. To get a list of orders ready for despatch, I have written a query which calculates the amount of items ordered against the amount of items despatched from that order. If there are any outstanding items, then this order is in the list of orders which are outstanding for despatch.
I am having trouble working out how to go about creating a list of orders ready do be invoiced... Orders that are ready to be invoiced can be completely despatched orders or part despatched orders. That is to say that if an order is only half despatched, my client still wants to be able to raise an invoice against that part of the order. I envisage creating a query which checks my orderline table to see if the item has been invoiced and creating the list from there. But as the application is used more and more, this query will take longer to run? ANy ideas?
Thanks.
Steve.
Hello,
Can anyone guide me to monitor whether Production Sql server is up and running and would e-mail or page me if by chance it has stopped.
Any help is appreciated.
Thanks.
Priti
is there any way to make the status of a package execution to be success without caring about failure of certain steps in the package?
View 1 Replies View RelatedI need to know the meaning of the status bit in sysdatabases because BOL only reports some of them.
For SQL 7.0 SP1 I have some database with a status bit equal to 0 (zero) and equal to 12.
For SQL 2000 SP2 I have some database with a status bit equal to 0 (zero),24,20 and 1073741840.
So I would really appreciate if someone can explain the meaning of these status bits.
Thank you very much.
Franco
Hi,
Is there any way to update the status bar in Query Analyzer.
Suppose I am running a script which updates data to a file. I want to know the status showing the percentage it completed.
Thanks
:confused:
I just started working with MS SQL. I'm attempting to find the equivalent of the MySQL commands STATUS and SHOW STATUS.
Essentially, I want to connect to the database from a .net app, check the status, such as how many connections, table locks, errors, etc... and display that information on my application.
Any recommendations?