Is there a way to stop SSRS from rewriting my SQL? I can write an SQL statement that will execute within seconds within SQL Server Management Studio. But when I put that SQL into a dataset in SSRS, SSRS rewrites the SQL and makes the WHERE clause much more complex. Now the SQL takes minutes to complete.
Is there a way to stop this?
Rob
We have 7 SSRS reports subscription which execute every night at various time intervals.
Some times, due to database unavailability subscriptions can not access the source database, so these subscriptions continuously try to connect the database. (Even after setting connection time out.)
When the database is up again, all these subscriptions create bottleneck for the database and the whole system crashes.
So we want to stop subscriptions after some time interval (lets say 2 hours after it starts),
After that time interval what ever may be the status of the subscription (processing, done or fail) it should stop.
Please let me know the solution, Thanks in advance.
Since as soon as you extend your mdx datasets manually you can no longer switch back into design mode without losing your changes, right?
If that's the case, is there some way to disable design mode completely? i'm finding that the GUI has the tendency to SILENTLY revert the dataset editor back to design mode while I'm busy editing a layout, thereby losing my carefully crafted MDX.
I am having problems rewriting this proc as a TVF. I have been over the samples but I am struggling
Code Snippet
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports System.Management
Imports Microsoft.SqlServer.Server
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub pnetWMI(ByVal sComputer As String, ByVal sWQL As String, ByVal sCounter As String)
Try
Dim searcher As New ManagementObjectSearcher( _
"\" & sComputer & "
ootCIMV2", _
sWQL)
For Each queryObj As ManagementObject In searcher.Get()
Dim record As New SqlDataRecord( _
New SqlMetaData(sCounter, SqlDbType.VarChar, 100))
SqlContext.Pipe.SendResultsStart(record)
record.SetString(0, queryObj(sCounter))
SqlContext.Pipe.SendResultsRow(record)
Next
SqlContext.Pipe.SendResultsEnd()
Catch ex As Exception
Dim sp As SqlPipe = SqlContext.Pipe()
sp.Send(ex.Message)
End Try
End Sub
End Class
This what I have. It doesn't like my table definition or my use of the input parameters in the sub. Whats wrong?
Code Snippet
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports System.Management
Imports Microsoft.SqlServer.Server
Partial Public Class UserDefinedFunctions
_
Public Shared Function fnetWMI(ByVal sComputer As String, ByVal sWQL As String, ByVal sCounter As String) As IEnumerable
Return New SqlDataRecord(New SqlMetaData(sCounter, SqlDbType.VarChar, 100))
End Function
Public Shared Sub FillRow(ByRef PerfValue As SqlChars)
Try
Dim searcher As New ManagementObjectSearcher( _
"\" & sComputer & "
ootCIMV2", _
sWQL)
For Each queryObj As ManagementObject In searcher.Get()
Dim record As New SqlDataRecord( _
New SqlMetaData(sCounter, SqlDbType.VarChar, 100))
SqlContext.Pipe.SendResultsStart(record)
record.SetInt32(0, queryObj(sCounter))
SqlContext.Pipe.SendResultsRow(record)
Next
SqlContext.Pipe.SendResultsEnd()
Catch ex As Exception
Dim sp As SqlPipe = SqlContext.Pipe()
sp.Send(ex.Message)
End Try
End Sub
End Class
Hello,
I am working on a query that has 11 left join statements, some are hitting against reference data that has a small amount of records, whereas others not so small. From a performance standpoint, should I look at rewriting this query, and how would I do so? What is an alternative to left joins; any examples anyone has?
Thanks.
Hi everyone
I've built an HttpModule and hooked into the Application_AuthorizeRequest to do some URL Rewriting. Basically what I'm doing is grabbing the URL such as www.mysite.com/about/, then doing a database lookup on the path (/about/) to see if I have a corresponding record for that string, and then rewriting the URL if a result is found (to something like www.mysite.com/About.aspx?id=1).
My problem is that I am getting the following intermittent SQL error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Whenever it happens I can hit refresh straight away and it will work fine. It also happens each time I upload a new web.config to my server.
Any help would be appreciated!
Thank you
Hi Friends,
I have the following set of Insert Statements that calculates sums for various criteria and inserts a row at a time onto my table.
I have a row for every month starting from January with sums for 4 severity levels. So for 12 months that would be 48 Insert Statements and if I want to do this for 4 different types of [EName] that would be 48 * 4 = 192 Insert Statements. Is there a better way to write this. Thanks for your help
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 1 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 1)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 2 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 2)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 3 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 3)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 4 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 4)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 1 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 1)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 2 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 2)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 3 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 3)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 4 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 4)
Does anybody have any suggestions to rewrite the 2nd WHEN part of the query??? Thank you.
------------------------------------------------------------
update t_pgba_hdr
set HCFA_PLACE_TRMT_CD2 =
case when (select max(b.HCFA_PLACE_TRMT_CD)
from t_pgba_hdr as b
where t_pgba_hdr.clm_id2 = b.clm_id2) like '[A-Z]%'
then '99'
when (select ltrim(rtrim(max(b.HCFA_PLACE_TRMT_CD)))
from t_pgba_hdr as b
where t_pgba_hdr.clm_id2 = b.clm_id2) in '[0-9]'
then '0' + (select ltrim(rtrim(max(b.HCFA_PLACE_TRMT_CD)))
from t_pgba_hdr as b
where t_pgba_hdr.clm_id2 = b.clm_id2)
end
------------------------------------------------------------
-soumya
Hi
Is there a way that I can sum the value of a field in a text box and use where clause with it..
For Example
I want
=Sum(Fields!TO_DATE_AMT_PL.Value) where date<=20040509
What is the syntax as I know in a text box, you can not use where the way I wrote it above...Thanks
I am having a heck of a time figuring out what controls how/when the generated SQL for a report puts a DISTINCT clause in front of it.
For instance, not that this report makes any sense, but I have 58 rows in my fact table/entity €“ If I pull in a lookup field and execute, the distinct is put in the query and I basically get a list of the possible domain values. It runs the whole joined table query to get them, but it does list (in this case) just 4 records. Now I put in the primary ID of the fact entity and the distinct goes away and I get my 58 rows. If I put two lookup fields, the DISTINCT is back. If I pull in the description field (text string just a direct source field mapping not part of the identifying attributes), the distinct is there. If I pull in the Company Name field on a different entity (which is essentially the same as pulling in Description only it is part of the identifying attributes), there is no DISTINCT. I can pull in all my fields on this entity and none of them drive the distinct. And I swear (ok, I am probably lying but not on purpose) the field/attribute and roles properties are all the same on the attributes. But you get my general question/situation...
Any insight for me? Does it have to do with how I am building the report rather than the underlying model?
Thanks in advance,
I have below query which is working fine in SQL but if i use same query in SSRS dataset then it is not working at all.If i put only one condition in where clause then it works but if i put multiple conditions then it does not works in SSRS and through error "data is not available".
SELECT id,
DATEDIFF(DAY, Created, BMTRequestReviewDate) AS 'EvaluateDays',
all code goes here
FROM [dbo].[SBWT_Data]
WHERE
upper(Status) not like '%XX%'
AND upper(Status) not like '%DELETED%'
upper(Status) not like '%CLOSED%'
---OR
WHERE Status NOT IN ('90 - Closed','XX - Rejected','XX - Request Rejected','XX - Deleted')
As you can see in code i have tried with both where conditions but it is not working. It seems that SSRS does not supports multiple conditions for same field.
I want to write a conditional where clause in SSRS query, such as
WHERE CASE WHEN @para = 1 Then Column1 Like '%%'
                   WHEN @para = 2 Then Column1 IN (@NameList) END;
What's the correct syntax to write the conditional where clause?
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?
I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....
I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.
Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?
Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1
View 3 Replies View RelatedI am working with a vendor on upgrading their application from SQL2K to SQL2K5 and am running into the following.
When on SQL Server 2000 the following statement ran without issue:
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
GROUP BY TrackID
HAVING MAX(LegNum) = 1 AND
TrackID + 'x1' IN
(
SELECT
dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
)
Once moved to SQL Server 2005 the statement would not return and showed SOS_SCHEDULER_YIELD to be the waittype when executed. This machine is SP1 and needs to be upgraded to SP2, something that is not going to happen near time.
I changed the SQL to the following, SQL Server now runs it in under a second, but now the app is not functioning correctly. Are the above and the following semantically the same?
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
WHERE TrackID + 'x1' IN
(
SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
GROUP BY TrackID
HAVING MAX(LegNum) = 1
)
2 examples:
1) Rows ordered using textual id rather than numeric id
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id
Result set is ordered as: 1, 11, 2
I expect: 1,2,11
if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
2) SQL server reject query below with next message
Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id
Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
It reproducible on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
and
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
In both cases database collation is SQL_Latin1_General_CP1251_CS_AS
If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.
Could someone clarify - is it bug or expected behaviour?
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
Hi All,
I'd like to remotly stop an instance of SQL Server
but this command does not seem to work....
net stop mssql$<server name> (eg. net stop mssql$prod)
...any ideas? I'll want to start this sql server again too.
David.
Is there any way to stop SQL CLR on database apart from using
sp_configure 'clr enabled', 1
GO
RECONFIGURE
GO
I want to stop this functionality on database...any idea...
Hi,
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
Thanks,
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
Is it possible to write SSRS 2008 reports to run on an existing SSRS 2005 server?
If yes, what do I need to do to be able to write SSRS 2008 reports on my developer PC that will run on the SQL 2005 Server (which also has SSRS 2005 installed on it)?
I installed Visual Studio 2008 beta on the development PC and it appears that it needs SSRS installed on it too. So I installed SQL 2008 SSRS (SQL Server Reporting Services) and SQL 2008 Workstation Components onto the developer PC. Next I run the SQL 2008 "Reporting Services Configuration" tool. When I click on the "Web Service URL" section it hangs indefinitely and I have to force it closed.
The developer PC is Windows Vista Business.
Any suggestions on making this work, or any other information that you can think of that would allow me to use Visual Studio 2008 and the SQL 2008 "Report Designer Preview" tool to develop SSRS reports that will run on the SQL 2005 SSRS server?
Thanks!
-ErikR
Hi All I am using SQL server Database in one of my table there is a column which is set to Identity=Yes i.e., The ID is increment by one on every insert and if the insertion failed then the id generated goes off then in the next generation it uses new id ..........EXfirst insertion id=1 then in the second insertion if while adding data to other rows if i get some error then the id 2 is not used and when i correct the error and insert it then id=3? can any one give me the solution for this and NextWhen i delete the datafrom the table see the ids are upto 20 and i delete all the records from the table after insertion of new record the id will be 21plese help me in this
View 3 Replies View RelatedI have these two tables and I cant prevent duplicates.
SEARCH
Item
ItemID
Info
CATEGORYDATA
CategoryID
ItemID
SELECT DISTINCT SEARCH.ItemId, SEARCH.Item, CATEGORYDATA.CategoryId
FROM SEARCH
INNER JOIN CATEGORYDATA
ON SEARCH.ItemID = CATEGORYDATA.ItemID
And I get something like:ItemID Item CategoryID
1 item1 1
3 item3 1
1 item1 2 <---duplicate
1 item1 3 <---duplicate
2 item2 3
4 item4 3
Thanks in advance
I have a snapshot replication is running and now I want to stop the replication for a while. Is it possible to do that? If it is then where I can set to stop it? Please help.
Thanks for Help!
Hello,
Does any one know how I can start and stop the sql services with the net use command?
Thanks,
Anthony
I use EM to handle 2 SQL servers. One I can `stop`; the other I can`t. (except I think I used to be able to do so).
When I select the `stop` I get the following message from EM:
"An error 1051 - (A stop control has bee sent to a service which other running services are dependent on) occurred while performing the service operation on the MSSQLServer service."
How do I track down what this other running service is? How do I stop SQL?
All help greatly appreciated.
Judith
I need to remotely start and stop SQL from another machine from a program or command line. Thanks in advance.
View 1 Replies View RelatedI wanted to remove my Northwind database. But that database is currently used for replication. I'll have to stop the replication first before I can remove it.
So how to stop the replication?
Thanks!
amy
Hi,
Can anybody tell me how to stop the execution of a T-SQL statement at once? I have tried Alt+Break but its taking a long time to stop.Whats the reason?Plz suggest....I am dealing with a database containing 24343000 data.
Joydeep
Hey
I have a statement that has been running great for the past hour but now it will not pull the info any longer and just gives me a null
DECLARE @Text VARCHAR(2000)
SELECT @Text = COALESCE(@Text + '', '') + x.memotext
FROM (SELECT TOP 100 PERCENT memotext FROM customermemoheader WHERE memonumber = 'TERMS' and customernumber = '0009' ORDER BY seqnumber) AS x
SELECT @Text AS MemoText
I have verified in the tables that the info is there by running the select statement from within the (). It has worked for 8000 records and now it no longer works. Any help would be much appreciated.
THanks