In the Report Manager, Manage Jobs section there exists the ability to stop a report from running but becasue I am running a longer report, i was unable to do so. It is still running so I checked it out online and Microsoft says: Managing a long-running report process is not supported. Specifically, you cannot use the Manage Jobs feature in Report Manager to stop report processing. So, how can you stop the report from running?
We have 7 SSRS reports subscription which execute every night at various time intervals.
Some times, due to database unavailability subscriptions can not access the source database, so these subscriptions continuously try to connect the database. (Even after setting connection time out.)
When the database is up again, all these subscriptions create bottleneck for the database and the whole system crashes.
So we want to stop subscriptions after some time interval (lets say 2 hours after it starts),
After that time interval what ever may be the status of the subscription (processing, done or fail) it should stop.
Please let me know the solution, Thanks in advance.
I created a report using visual studio and published it in dev server which is in another machine. Then I connected a shared data source which was already publisehd earlier by someone else. I use a stored proceedure for the report which has two FromDate and Todate parameters. But once I deploy the report, i can not see it on report manager. When I try to view it, I get the following error
.
An error has occurred during report processing.
Query execution failed for data set 'DataSet1'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I got a problem with my project on reporting services. I installed MS SQL Server 2014 (86x version), Report Builder 3.0 (for creating my reports) and Data Tools for my SQL Server.Now I created a report via Report Builder 3.0 with a SAP NetWeaver as a data source. I could create and view it in Report Builder 3.0.
But when I want to view it on my Report Server it doesn't work. I only get this error."An error has occurred during reporting processing. (Processing Aborted) An attempt has been made to use a data extension 'SAPBW' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)" ...
I found on the internet a few solutions. I installed the Data Tools for the 86x version of the SQL Server. Didn't work. And when I want to change some coding in "RSReportDesigner.config" it says that I'm not allowed to save the changes in this directory.
After deploying my report on the report Server, I try to access it on the browser which gives me the following error.
The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'http://localhost/reports/Pages/Folder.aspx'. Line...<%@ Page language="c#" Codebehind="Folder.aspx.cs" AutoEventWireup="false" Inherits="Microsoft.ReportingServices.UI.Folde...
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports, Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this?
I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either.
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this?
I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either.
My issue is with converting multi-value parameters:
In Crystal Reports, you can set a parameter to accept multiple vales (Discrete, Range or Discrete and Range).
As an example:
I have a database table with a column called ID. I can create a parameter called param_id and set the options of the parameter to "Allow multiple range values".
With this setup, I can limit the result set of the report by comparing the param_id parameter to the ID column in the database. Because param_id is a multi-value range parameter, I can pass it the following data: 1 - 50 60 - 80 150 - 127
This will only return results within those ranges.
Does anyone know if SSRS provides this kind of functionality?
Is there a way to copy reports from other users "My reports" folder? I am logging onto the management studio reporting services using an administrative account and I am able to view the reports from all users' "My Reports" folder. But I am not able to export them as an rdl file. I am able to export reports from other common folders, but not from the "My Reports" folder.
The reason I need to do this is some of the users have created some reports in one environment and the reports are available in their respective "My Reports" folder. I need to move these reports to their corresponding "My Reports" folder in another environment.
1. I downloaded ChartFXRSTrial and created one chart, and able to deploy it in ReportServer, but the problem is the reports are not showing there, i checked the configuration of .dll files in the help provided by chartFX, but couldn't get anything, so could help me on this.
2. How to give Tooltip for the X- axis or Y- axis values in the ReportServer , i tried using chartproperties of .rdl file, but didnt understand it. can help me on this, and one more i tried with Dundas too, If im giving tooltip as #valy then, it is showing samething in reportserver instead the values of 'Y-axis'.
Hi All I am using SQL server Database in one of my table there is a column which is set to Identity=Yes i.e., The ID is increment by one on every insert and if the insertion failed then the id generated goes off then in the next generation it uses new id ..........EXfirst insertion id=1 then in the second insertion if while adding data to other rows if i get some error then the id 2 is not used and when i correct the error and insert it then id=3? can any one give me the solution for this and NextWhen i delete the datafrom the table see the ids are upto 20 and i delete all the records from the table after insertion of new record the id will be 21plese help me in this
I have a snapshot replication is running and now I want to stop the replication for a while. Is it possible to do that? If it is then where I can set to stop it? Please help.
I use EM to handle 2 SQL servers. One I can `stop`; the other I can`t. (except I think I used to be able to do so).
When I select the `stop` I get the following message from EM:
"An error 1051 - (A stop control has bee sent to a service which other running services are dependent on) occurred while performing the service operation on the MSSQLServer service."
How do I track down what this other running service is? How do I stop SQL?
I wanted to remove my Northwind database. But that database is currently used for replication. I'll have to stop the replication first before I can remove it.
Hi, Can anybody tell me how to stop the execution of a T-SQL statement at once? I have tried Alt+Break but its taking a long time to stop.Whats the reason?Plz suggest....I am dealing with a database containing 24343000 data. Joydeep
I have a statement that has been running great for the past hour but now it will not pull the info any longer and just gives me a null
DECLARE @Text VARCHAR(2000) SELECT @Text = COALESCE(@Text + '', '') + x.memotext FROM (SELECT TOP 100 PERCENT memotext FROM customermemoheader WHERE memonumber = 'TERMS' and customernumber = '0009' ORDER BY seqnumber) AS x
SELECT @Text AS MemoText
I have verified in the tables that the info is there by running the select statement from within the (). It has worked for 8000 records and now it no longer works. Any help would be much appreciated.
I have a performance issue with a Cognos report against SQL Server 2005. The total running time of the report is 1 minute 15, and using SQL Profiler I found out that 1m13 is spent preparing SQL. Execution and generating the report takes up 2 seconds; no problem there. The SQL is the same every time I run the report, yet SQL Server spends 1m13 preparing it every single time! I'm no DBA, but as far as I understand that's not what's supposed to happen; once prepared, the SQL should execute quickly every time.
Is there a way to stop SQL from preparing the statement every time?
(Cognos 8 against SQL Server 2005 through OLEDB. Oh, and this query takes about a second when run in EM.)
Hi,I am doing some resource hungry tasks (some extraction and loadingthrough DTS), for which each time the SQL Server Log files gets filledup!Is there any way to stop the logging (like as during restore)?Thanks in advance.-surajit
i'm desperate! I have a application in my SQL Express and only one database for it. But right now it have 3,97gb, without log file. i'm already buying a SQL Enterprise to upgrade this, take some days, but my question is: when this size came to 4,00gb my application will be stop working ? my business stop ???
Error: 0xC0047039 at Load work$$MyDataFile from flat file, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Load work$$MyDataFile from flat file, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
I did not request a shutdown! Someone please give me a global switch to tell SSIS to keep going. Why should I not load 20,00 records because of one bad record?
I have tediously changed every field on every tool to "Ignore Error". Why should I still have to do this? I mean why does SSIS default to failure? Is there some switch I could change in the XML that would change this default behaviour?
The problem with the data in this case: a NewLine character was missing so it looked to the data flow as one very long line.
