Store Procedure While Loop Get Each Record

Mar 10, 2005

hi all,
I want to execute a store procedure but my query returns more than one value. how can I asign value for that. Here is the code. Please help me out.

problem is @aaa where i cannot set the value.

Thanks
Regards
Sudadg

CREATE PROCEDURE movetable
@id int

AS
declare @VType varchar(10)
declare @count int
declare @aaa varchar(50)
set nocount on
create table #temp1(id int identity(1,1),Ac_Code varchar(50))

select count(*) from Journal_Table where Voucher_No=@id
set @count=1
set @count=@@rowcount

while @count <>0
begin
set @aaa=(select Ac_Code from Journal_Table where Voucher_No =@id)
insert into #temp1(Ac_Code) values(@aaa)

set @count=@count-1
end
select * from #temp1

GO

View 3 Replies


ADVERTISEMENT

How Do I Loop Through A Record Set In A Stored Procedure?

Jan 17, 2006

Below is a stored procedure that designed to populate a drop down menu system on a website. It works fine as long as the 'id's in the first select start at 1 and are sequential. It fails to grab all the sub tables if the ids are not sequential. So, how do I structure the loop so that the WHERE clause uses not the loop iterator, but rather, the ids from the first Select statement.
Alternatively, is there a more elgant approach that will return the same set of recordsets?
Any help would be much appreciatedThanks
ALTER PROCEDURE dbo.OPA_GetMenuItemsASDeclare @i tinyint ,@tc tinyintSet @i = 1
/* Select for top level menu items*/
SELECT id, label, url, sortFROM mainNavORDER BY sort
Set @tc = @@rowcount
while @i <= @tc
beginSet @i = (@i + 1)
/* Select for submenu itemsSELECT id, label, url, sort, mainNavIdFROM SubNavWHERE (mainNavId = @i)ORDER BY mainNavId, sortend
RETURN
 
 

View 7 Replies View Related

How Do I Loop Thru A Record Set In A Stored Procedure?

Jan 17, 2006

Below is a stored procedure that designed to populate a drop down menu system on a website. It works fine as long as the 'id's in the first select start at 1 and are sequential. It fails to grab all the sub tables if the ids are not sequential. So, how do I structure the loop so that the WHERE clause uses not the loop iterator, but rather, the ids from the first Select statement.

Alternatively, is there a more elgant approach that will return the same set of recordsets?

Any help would be much appreciated
Thanks

ALTER PROCEDURE dbo.OPA_GetMenuItems
AS
Declare @i tinyint ,
@tc tinyint
Set @i = 1

/* Select for top level menu items*/

SELECT id, label, url, sort
FROM mainNav
ORDER BY sort

Set @tc = @@rowcount

while @i <= @tc

begin
Set @i = (@i + 1)

/* Select for submenu items*/
SELECT id, label, url, sort, mainNavId
FROM SubNav
WHERE (mainNavId = @i)
ORDER BY mainNavId, sort
end

RETURN

View 6 Replies View Related

Integration Services :: SSIS Foreach Loop Container Passing Variables To Store Procedure

Sep 8, 2015

I am having a challenge to pass the filename variable from SSIS Foreach Loop Container to SQL store procedure.  I have an "Execute SQL Task" inside "Foreach Loop Container" which will receive the input filename parameter passed by the Foreach Loop Container.  The store procedure command line is defined as "EXEC sp_mySQLStoreProcedure  ?" within the "Execute SQL Task".  The Foreach loop container will gather the filenames from File System then put it in the filename variable one by one.  I would like to pass the filename variable as the input parameter to the sp_mySQLStoreProcedure in the "Execute SQL Task".  How can I connect the variable and the store procedure so that it will process all the input files gathered by the Foreach Loop Container?

View 4 Replies View Related

SQL Server 2008 :: Run Store Procedure When Table Is Updated With Record

Jul 15, 2015

I wanted to know if it is possible to run a stored proc (report) when a new record is inserted / updated into a certain table. Also if it could do so for records with a column that meet a certain criteria ie. sell description like '%test%'

View 2 Replies View Related

Loop Through Each Record And Then Each Field Within Each Record

Dec 15, 2005

I need to essentially do 2 loops. One loops through each record and then inside each record row, I want to perform an insert on each column.

Something like this maybe using a cursor or something else:

For each record in my table (I'll just use the cursor)
For each column in current record for cursor
perform some sql based on the current column value
Next
Next

So below, all I need to do is figure out how to loop through each column for the current record in the cursor


AS

DECLARE Create_Final_Table CURSOR FOR

SELECT FieldName, AcctNumber, Screen, CaseNumber, BKYChapter, FileDate, DispositionCode, BKUDA1, RMSADD2, RMSCHPNAME_1, RMSADDR_1,
RMSCITY_1, RMSSTATECD_1, RMSZIPCODE_1, RMSWORKKPHN, BKYMEETDTE, RMSCMPNAME_2, RMSADDR1_2, RMSCITY_2, RMSSTATECD_2,
RMSZIPCODE_2, RMSHOMEPHN, BARDATE, RMSCMPNAME_3, RMSADD1_2, RMSADD2_3, RMSCITY_3, RMSZIPCODE_3, RMSWORKPHN_2
FROM EBN_TEMP1

OPEN Create_Final_Table

FETCH FROM Create_Final_EBN_Table INTO @FieldName, @AcctNumber, @Screen, @CaseNumber, @BKYChapter, @FileDate, @DispositionCode, @BKUDA1, @RMSADD2, @RMSCHPNAME_1, @RMSADDR_1,
@RMSCITY_1, @RMSSTATECD_1, @RMSZIPCODE_1, @RMSWORKKPHN, @BKYMEETDTE, @RMSCMPNAME_2, @RMSADDR1_2, @RMSCITY_2, @RMSSTATECD_2,
@RMSZIPCODE_2, @RMSHOMEPHN, @BARDATE, @RMSCMPNAME_3, @RMSADD1_2, @RMSADD2_3, @RMSCITY_3, @RMSZIPCODE_3, @RMSWORKPHN_2

WHILE @@FETCH_STATUS = 0
BEGIN

@Chapter = chapter for this record

For each column in current record <---- not sure how to code this part is what I'm referring to

do some stuff here using sql for the column I'm on for this row

Next

Case @Chapter
Case 7

Insert RecoverCodeRecord
Insert Status Code Record
Insert Attorney Code Record

Case 13

Insert Record
Insert Record
Insert Record

Case 11

Insert Record
Insert Record
Insert Record

Case 12

Insert Record
Insert Record
Insert Record

END

close Create_Final_Table
deallocate Create_Final_Table

View 2 Replies View Related

Loop Through Record Set And Assign Number

Nov 7, 2013

I am new to SQL Server (coming from Oracle background) and have a large table I need to loop thru and assign a number 1 thru 5 on each record.

below is an example of how I would do it in Oracle.

declare
num number := 1;
cursor c_rec is SELECT rowid, t.* FROM temp t order by t.column;
begin
for d_rec in c_rec
loop
update temp set column = to_char(num)

[Code] ....

View 7 Replies View Related

How To Use For Each Loop To Read One Record And Insert The Same Into Destination

Jul 27, 2007

Hi,

My procedure to implement a task is like this

I will be using execute SQL task to fetch the records from source,after this wanna use For each loop to access each record one at a time,perform some trnsformations and insert that record into destination.

Help me in accessing the data stored in the Variable(SQL task) in Dataflow task of foreach loop.

View 10 Replies View Related

Call Store Procedure From Another Store Procedure

Nov 13, 2006

I know I can call store procedure from store procedure but i want to take the value that the store procedure returned and to use it:

I want to create a table and to insert the result of the store procedure to it.

This is the code: Pay attention to the underlined sentence!

ALTER PROCEDURE [dbo].[test]



AS

BEGIN

SET NOCOUNT ON;



DROP TABLE tbl1

CREATE TABLE tbl1 (first_name int ,last_name nvarchar(10) )

INSERT INTO tbl1 (first_name,last_name)

VALUES (exec total_cash '8/12/2006 12:00:00 AM' '8/12/2006 12:00:00 AM' 'gilad' ,'cohen')

END

PLEASE HELP!!!! and God will repay you in kind!

Thanks!

View 7 Replies View Related

FOR EACH Loop To Export Files Based On Header Record

Dec 21, 2006

Hey guys,,

Well im new at this SSIS stuff and i have something that i am trying to do, but cannot get it to work.. Ill try to explain, and if anyone can help me or point me in the right direction it would be much appriciated..

I have 2 tables, one header table. and one lines table. This is a one - to -many relationship.. ie 1 header, many lines.. This is a Order Header, and Order Lines table setup.. Order header has Order numbers and and email address field that link to the lines table by order number. I also have a view which links all this info together.

I would like to export a excel file (preferable named from the order number column - but that can come later) for each order number in the header table. The excel file will contain the details from the View that was created. I want this to loop through all the header records in the header table and create a excel file for each one..


Down the track i want to add a send mail task to this and pass the email address to a variable so i can use it in the send mail task.. But ill get the main part working first..

Anyhelp would be more than helpful.. I tried to set this up, but i am stuck on the enumerator part..



thanks again, scotty

View 3 Replies View Related

Duplicate Record Count And Store In Variable

Jul 16, 2014

I have duplicate records in table.I need to count duplicate records based upon Account number and count will be stored in a variable. I need to check whether count > 0 or not in stored procedure.I have used below query.

SELECT @_Stat_Count= count(*),L1.AcctNo,L1.ReceivedFileID from Legacy L1,Legacy L2,ReceivedFiles where L1.ReceivedFileID = ReceivedFiles.ReceivedFileID
and L1.AcctNo=L2.AcctNo group by L1.AcctNo,L1.ReceivedFileID having Count(*)> 0
IF (@_Stat_Count >0)
BEGIN
SELECT @Status = status_cd from status-table where status_id = 10
END

View 5 Replies View Related

Store Procedure Not Store

Nov 20, 2013

My store Procedure is not save in Strore Procedure folder at the time of saving it give me option to save in Project folder and file name default is SQLQuery6.sql when i save it after saving when i run my store procedure

exec [dbo].[SP_GetOrdersForCustomer] 'ALFKI'

I am getting below error :

Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure 'dbo.SP_GetOrdersForCustomer'.

View 13 Replies View Related

Can You Do A FOR EACH Loop In T-Sql? Maybe In A Stored Procedure?

Jan 18, 2008

I have a table that is basically set up so there is an employee_id, field_id, and a value... it looks sort of like this (in reality there are over 450 different employee ID's)
employee_id      field_id    value
100                      1           Brian
100                      2           617-555-5555
100                      3           Boston Office
101                      1           Mary
102                      2          617-666-6666
101                      3           New york office
 
I want to loop thru this table so "for each" distinct employee ID, I can do an insert statement into another table where it is setup a little cleaner
I know how to declare the variables, and set each variable = to the correct value, and how to do the INSERT once,  but I am not 100% sure how to set up the loop so it will do each individual employee_ID.
Any suggestions?

View 9 Replies View Related

Need Help Using A Loop In A Stored Procedure

Feb 21, 2008

How do I write a stored procedure to loop through all the records to see if duedate is passed today's date then send an email to those users
Dim duedateDim @emailDim ocdoEmail As New Object
while duedate < DATEADD(day, DATEDIFF(day, '20010101', CURRENT_TIMESTAMP), '20010101')  (sending the email)ocdoEmail = Server.CreateObject("CDO.Message")
ocdoEmail.To = @email
ocdoEmail.From =
ocdoEmail.CC =
ocdoEmail.Subject = "Your Item is passed due"ocdoEmail.HTMLBody = " was shipped to you on " & ShipDateTxt.Text & " and due on " & DueDateTxt.Text
ocdoEmail.send()
Don't know which loop I should use and how to set it up.
Thanks! 
 
 
 
 
dim @duedatedim @email
while
 

View 4 Replies View Related

Using While Loop In Stored Procedure

Jul 31, 2014

I have two tables one hold all Friday dates for given year (col1 ID, col2 date), second table have three column col1, col22, col3. What I need to do is insert the first Friday date into the second table for col1 and second Friday into col2, third Friday in col3, fourth Friday in col1 and the process repeat until all Friday dates are inserted. I would like to use While loop but stuck on how to iterate through table one to get the data.

Example:
table1 data
101/03/2014
201/10/2014
301/17/2014
401/24/2014
501/31/2014
602/07/2014
702/14/2014
802/21/2014

table2 data should look after insert compelete.

col1 col2 col3
01/03/2014 01/10/2014 01/17/2014
01/24/2014 01/31/2014 02/07/2014
02/14/2014 02/21/2014

View 2 Replies View Related

Call Stored Procedure In Loop

Oct 26, 2006

I have gridview display a list of users. I have added a column for a check box. If the box is checked I move the users to another table.I need to pass some parameter of or each row to a stored proc. My question. In the loop where I check if the checkbox is selected I need to call the stored procedure.Currently I do an open and closed inside the loop.What is best and most effficent  method of doing this should I open and close the connection outside the loop and change the procs parameters as loop through. System.Data.SqlClient.SqlConnection conn =
new System.Data.SqlClient.SqlConnection(
System.Configuration.ConfigurationManager.ConnectionStrings["connString"].ConnectionString);
System.Data.SqlClient.SqlCommand commChk = new System.Data.SqlClient.SqlCommand("storedProc", conn);
commChk.CommandType = System.Data.CommandType.StoredProcedure;
commChk.Parameters.AddWithValue("@mUID", ddMainUser.SelectedValue.ToString());
commChk.Parameters.AddWithValue("@sUId", gvUsers.Rows[i].Cells[2].Text);
commChk.Connection.Open();
commChk.ExecuteNonQuery();
conn.Close();   If so exactly how do I do this? How do I reset the parmaters for the proc?  I haven't done this before where I need to loop through passing parameter to the same proc. thanks    

View 2 Replies View Related

Loop Through A Table In A Stored Procedure

May 17, 2008

Hi, how do I loop through a table in a store procedure? I need to check the all the record in a table and do some logic and then insert or update another table base on the logic?

View 4 Replies View Related

Fetch Loop Stored Procedure

Jun 8, 2004

What is wrong with this stored procedure? This should work right?



Create PROCEDURE UpdRequestRecordFwd

@oldITIDint ,
@newITID int
AS
Declare @RRID int
Declare @APID int
Declare crReqRec cursor for
select RRID from RequestRecords where ITID = @oldITID
open crReqRec
fetch next from crReqRec
into
@RRID
while @@fetch_status = 0
Begin

Update RequestRecords
set ITID = @newITID
where RRID = @RRID

FETCH NEXT FROM crReqRec
into
@RRID
end

close crReqRec
deallocate crReqRec


GO

View 4 Replies View Related

Double Loop In Stored Procedure

Mar 15, 2006

Dear All,

I’m working on a stored procedure that meant to mail out users some of their action items daily.

The procedure has a double loop, first the user ids and user email addresses are selected into a table, then the outer loop cycles through the user ids and selects relevant action items to another table. The inner loop then cycles through these action items and at the end of each outer loop a string is mailed out.

Problem is that as the outer loop selects the relevant items for a user, the table holding the action items basically gets filled with more and more records and the inner loop then adds every item in the table to the string that gets mailed out, ending up with more and more items going to all the users.

I have tried to delete all records from the actionItems table at the end of each outer loop after the content of the action Items are mailed out, however this seems to keep the actionItems table empty at all times.

Not sure if this description is clear enough but I can’t see where I’m going wrong in terms of approach.

Any ideas?

View 5 Replies View Related

Stored Procedure To Loop Through Databases

Mar 16, 2015

We're running SQL Server 2008 and have run into a bit of a situation. We have 5 databases all with the same tables and we are trying to create a query that will loop through the different databases and output the results per company database. I originally did a cursor, but my boss wants the query to be in a more readable format:

His ideal wish would be the query in a stored procedure and the cursor to create the input parameter for the stored procedure for the different databases.I've tried looking through some forums and googling some possibilities but can't seem to make any sense of them.

declare @dbname varchar(100)
,@sql varchar(max)
createtable #TempDBs (
dbname nvarchar(100)
, Orig_Jnl int
, BaseRef int
, Posting_Date date

[code]....

View 7 Replies View Related

Trying To Do REALLY Simple Procedure And Loop In SQL Server

Aug 16, 2006

Dear experts,Again, sorry to bother you again with such a seemingly dumb question,but I'm having some really mysterious results here.ie.Create procedure the_testAsBeginSelect CustomerID


Quote:

View 14 Replies View Related

How To Call A Parameterized Stored Procedure Within A Loop In ASP.NET

Oct 13, 2007

I would like to know what are the ways to call a parameterized stored procedure within a loop in ASP.NET.
Scenario:
 I have a loop  through a dataSet and for each record I am going to execute a stored procedure to insert data in many tables.
 I can not use the following syntax:
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "dbo.storedprocedurename"
With cmd
      .Parameters.Add(New SqlClient.SqlParameter("@param1", paramValue1))
      .Parameters.Add(New SqlClient.SqlParameter("@param2", paramValue2))
End With
 What are the other ways to execute the parameterized stored procedures within a loop in ASP.NET?
 
Thanks,
Carlos

View 4 Replies View Related

For Loop List Of Array In Stored Procedure

Aug 19, 2014

I would like to write a store prodecure to return a month:

My output:
Wk1 = July
Wk2 = July
Wk3 = July
Wk4 = July
Wk5 = Aug

and so on..

then i create list of array like below:

The counter for insert the week one by one

DECLARE @TotalWeek INT, @counter INT
DECLARE @WeekNo varchar, @Month varchar
SET @WeekNo = '4,9,14,18,22,27,31,35,40,44,48,53'
--this is weekno,if less than 4, month is july, lf less than 9, month is august and so on
SET @TotalWeek = 53

SET @counter = 1

[Code] ....

View 8 Replies View Related

Store Procedure

Feb 17, 2008

Hi guysi would really appreciate your help here. what am i doing wrong with this stored procedure ALTER PROCEDURE usp_CreateNewCustomer( @LName as varchar(50), @FName as varchar(50), @Dept as varchar(50)=NULL, @PhoneType as varchar(50)=NULL, @Complete as Bit=NULL, @CustomerID as Int OUTPUT,  @FaxModel as varchar(50)=NULL, @FaxNumber as varchar(50)=NULL, )ASINSERT INTO [CustomerInfo] ([LName], [FName], [Dept], [PhoneType], [Complete]) VALUES (@LName, @FName, @Dept, @PhoneType, @Complete)SELECT SCOPE_IDENTITY()INSERT INTO Extras (CustomerID, FaxModel, FaxNumber) VALUES (@CustomerID, @FaxModel, @FaxNumber)RETURN  It keeps on complaning "'usp_CreateNewCustomer' expects parameter '@CustomerID', which was not supplied."thanks 

View 4 Replies View Related

Store Procedure?

Feb 28, 2008

Hi all,
I have a few question regarding SPROC. Firstly, I want to create a sp, that will return a multiple column of data, how do you achieve that. Secondly, I want to create a store procedure that will return a multiple columns in a cursor as an output variable. Any help will be much appreciated. Can you have more then 1 return parameters???
Thanks.
Kabir

View 2 Replies View Related

How To Run SQL Store Procedure Using Asp.net

Mar 5, 2008

I have asp.net web application which interface with SQL server,
I want to run store procedure query of SQL using my asp.net application.
How to declare connectons strings, dataset, adapter etc to run my store procedure resides in sql server.
for Instance Dim connections as string,
                 Dim da as dataset, Dim adpt as dataadapter. etc
if possible , then show me completely code so I can run store procedure using my button click event in my asp.net application
thank you
maxmax 

View 2 Replies View Related

SQL Store Procedure In Asp.net

Apr 11, 2005

I am not sure if it is right place to ask the question. I have a store procedure in which funcitons are called and several temp tables are created. When I use sql analyzer, it runs fast. But when I called it from asp.net app, it runs slow and it waits and waits to get data and insert into temp tables and return. Though I have used with (nolock), it still not imprvoed. Any suggestions? Thanks in advance.
NetAdventure
 

View 1 Replies View Related

Store Procedure Maybe????

Jun 8, 2006

Hello, I am very new to ASP.NET and SQL Server.  I am a college student and just working on some project to self teaching myself them both. I am having a issue. I was wondering if anyone could help me.
Ok, I am creating a web app that will help a company to help with inventory. The employee's have cretin equipment assign to them (more then one equipment can be assigned). I have a search by equipment and employee, to search by equipment the entire database even then equipment that isn't assigned with the employee's it shows only that employees and if they have any equipment. They can select a recorded to edit or see the details of the record. The problem i am having is that the Info page will not load right. I am redirected the Serial Number and EmployeeID to the info page. I got everything working except one thing. If a person has more then one equipment when i click on the select it redirect and only shows the first record not the one I selected. and when i change it, a employee that doesn't have equipment will not show up totally.
 
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
 FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and  eq.SerialNo=@SerialNo
EmployeeID and SerialNo are primary keys.
I was thinking maybe create a store procedures, but I have no idea how to do it. I created this and no syntax error came up but it doesn't work
CREATE PROCEDURE dbo.inventoryinfo  AS
    DECLARE @EmployeeID int    DECLARE @SerialNo  varchar(50)
    IF( @SerialNo is NULL)
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
 FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID
 ELSE
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
 FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and  eq.SerialNo=@SerialNoGO
Also, when a user selects the select button in either Employee search or Equipment search it redirects them to info.aspx. Should I create a different aspx page for both? But I don't believe I should do that. I don't know if I gave you enough information or not. But if you could give examples that would be wonderful! Thanks so much Nickie
 
 

View 1 Replies View Related

Store Procedure

Aug 30, 2000

I want to know when does SQL flushes Store Procedure from the cache.



Thank You,
Piyush Patel

View 1 Replies View Related

Store Procedure

Dec 10, 2004

Hi, All,
I need to write a sales report which needs to seperate total from direct sale and agentsale. The report looks like this( in the table of query,we have agentnumber, productname, sales, month

Month salefromagent directsale total
Jan 1100 2300 3400
Feb 800 500 1300
..........
Dec
---------------------------------
I know we can handle this in the program use two queries.
But is there a way to do it use store procedure and then pass the result of store procedure to the ASP program. I am trying to write my first store procedure, thanks for any clue.
Betty

View 1 Replies View Related

Store Procedure Help

Nov 1, 2005

Hi all,
I need to write a sales store procedure.
The sales summary is basically group by agentCode.
But the problem is some agents have subagents.
i.e., in the sales table.
one agent 123456 has many subagents whose agentCode start with 17. And I want to group sales for all subagents who have agentCode 17XXXX to agent 123456's sales.
what should I do in the store procedure.

Thanks
Betty.

View 2 Replies View Related

Help With A Store Procedure

Jan 14, 2005

I am trying to create a store procedure that look at a table and only maintain 30 worth of data only forever. The data that fall outside the 30 days need to be deleted. Can anyone help me with this?

Thanks

Lystra

View 5 Replies View Related

Get ID From Store Procedure

Feb 22, 2006

I would like to create a employee store procedure to insert a record and mean while i can retrieve the EmployeeID for the record just inserted. Can you show me how to create a store procedure like this. Now i have a insert store procedure in the following:

CREATE PROCEDURE AddEmployee
(@efname nvarchar(20),
@elname nvarchar(20)
)
AS

insert into tblEmployeeName
(EmployeeFName, EmployeeLName)
values (@efname,@elname)
GO



Thanks.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved