I want to store time into a datetime datafield in MS SQL Database, but eventually, it was include a date prefix the time ! I had try the approach on following and get the invalid result.
Approach 1:
Dim strTime as String = "11:59:59 AM"
Output:
01-01-1900 11:59:59 AM
Approach 2:
Dim dtTime as DateTime = "11:59:59 AM"
Output:
1/1/0001 11:59:59 AM <- (error occur: unable add to DB cause date is not between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM)
* The time on the above is accompany with AM/PM.
Approach 3:
Dim strTime as String = "11:59:59 AM"
Dim strStartTime2 = DateTime.ParseExact(strStartTime, "hh:mm:ss", System.Globalization.CultureInfo.CurrentCulture)
Output:
01-01-1900 11:59:59 AM
Approach 4:
Dim strTime as DateTime = "11:59:59 AM"
Dim strStartTime2 = DateTime.ParseExact(strStartTime, "hh:mm:ss", System.Globalization.CultureInfo.CurrentCulture)
Output:
String was not recognized as a valid DateTime.
I know what cause the approach 4 get an error. That is because the strTime is declare as DateTime and that contain "AM/PM" in time.
My Question:
1]Can I just insert the time only to the DB without date?
2]If possible, what should I delcare in the variable(String/DateTime/..?)
3]How can I deal with the "AM/PM"? It must concate with time to identify daytime/night
If you know and have the solution, pls do me a favor and will be more appreciated.
Nothing difficult, I just need a way to generate a new datetime column based on the column [PostedDate], datetime. So basically I want to truncate the time. Thanks a lot.
I hope to update a DateTime column value with a Time input parameter. Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE] @QuePoolID int=null ,@ApptTime time(7) ,@SendOnDate datetime
Hello frdz,I m working with SQL SERVER 2005.My problem is with the creation of foreign key for some table thru which i m not able to insert the data.This table are samples i have included only main/few datafields and type from the table :Please test and rectify if any errors...and tell me what's problem.What changes can be made to perform insert..Table 1:ItemFields :itemid --> int identity ----- (p.k.)qty --> intTable 2: PurchaseOrderFields :purchaseid --> int identity ----- (p.k.) erroritemid --> int ---- (p.k.,f.k.) not able to make purchaseid f.k. in purchasereturn ?orderdate --> datetimeTable 3: PurchaseReturnFields :purchasereturnid --> int identity ----- (p.k.)purchaseid --> int ----- (f.k.) ???itemid --> int ----- (f.k.)returndate --> datetimeTable 4: ReceiptNoteFields :receiptid --> int identity ----- (p.k.)purchaseid --> int ----- (p.k.)Explanation :Table 1:Item There are 100 records of items in table with all its basic details.Table 2: PurchaseOrder The order placed by the customer can be as follows ....this is what i want to insert data into table.Sample-1orderdate --> June 14,2007purchaseid --> 101itemid --> 1,4,5,2,6,10Sample-2orderdate --> June 14,2007purchaseid --> 102itemid --> 1,6,10There can be multiple items order placed for purchaseid 1.Table 3: PurchaseReturn The purchase return of items will be as per purchase of items done.....this is what i want to insert data into table.Sample-1returndate --> June 20,2007purchasereturnid --> 201purchaseid --> 101itemid --> 5,10The items can be return as per purchaseid and items purchased.Table 4: ReceiptNote The receiptnote contains the details of the purchase of items done and the payment made.Hope to get a reply...after u view this topicwell can anyone test my table 2 & 3 fields in SQL SERVER 2005.There is problem in creating the table with foreign key...ERROR : The column in table PurchaseOrder do not match an existing primary key orUNIQUE constraint.Thanxs in advance...
Hi, I tried entering this value "8/24/2006 1:35:00.127 PM" with 127 as the milliseconds in a datetime field, but encountered error saying inconsistent datatype ... Anyone knows how to store datetime value with milliseconds in the SQL database? Thanks
I have a stored procedure to add a poeersons DOB to a table. The date is being stored as Dec 12 1980
Instead of as 12/12/1980
The table uses a datetime data type. The data type of the date being passed into the stored procedure is also set to datetime. (@DOB datetime) Even though the value passed into the procedure is 12/12/1980 It saves the date as Dec 12 1980
Hello. I've seached the this forum and others for this question of mine but couldn't get any thing. Everyone know that in MSSQL, the precision of datetime is currently limited to 1/300th of a second. My question is, is there any way to store the actual millisecond in the a table? Also, later, able to pull it up from the table? What are the options?
Is there any posibility to store only time and not date in sql server ? Even if there is no data type to support it, is there any round about way of doing it ?
Is there a way that I can do this at the table level to automatically handle the rounding of seconds, etc. down to the minute automatically without having to use a trigger?
Here is a very basic example of what I am trying to do:
--example: '09-22-2007 15:07:18.850' this is the value inserted into the table by the code select getdate()
--example: '2007-09-22 15:07:00.000' this is the value I want to store in the table select dateadd(mi, datediff(mi, 0, getdate()), 0)
Hello,I need to store the start and end time of each weekly class into adatabase. so that people can easily search for classes based on time.for example, someone might want to search all classes that are offeredbetween 9am and 2pm.How can i implement this time field? i don't have a date to store withthe hour and minutes. is there and way sql server can tell 2pm isbigger than (>) 9am?thank you in advance,eddy
I was hoping there's a way to make the Date, which I have as date/time, get taken from my computer so the user doesn't have to enter anything into the text boxes on my page.
I'm using ColdFusion, and know I can do this through code, but am wondering if it's possible for sql to do this also.
And, if you know of any good ColdFusion sites, I would appreciate it...I really want to nest <cfoutput> tags, but it's really tricky.
question - need to store only TIME in the fields what to use ? when i CREATE new TABLE and to store only TIME in the fields what to use smalldatetime ? smalltime ? need to store only TIME like 06:25 17:45
and need to see only the TIME not 01-01-1900:06:25
What datatype should I take to store time in a table -- datetime , float or decimal?
my requirement is to store "Worked Hours in a day by an employee" in the field say, 9 hrs and 30 mins.
I should be able to manipulate data in this field such as total hours present in the month, extra hours worked in a day (considering 9 hrs as standard time),less hours worked in a day, and so on
I have reservation database, suppose somebody reserved a resource on 10/12/2006 from 9:00am to 12pm. If anybody else want to reserve the same resource from 10am to 3pm. It will not let them reserver. I would like to check a range in store procedure. Is there has any function to check range in easy way? Many thanks.
Sorry if this has been asked befor, but I couldn't find anything that hepled me.
I have a datetime field and want to extract only the time. I know it works with CONVERT and style-type 108. But I get something like this: 08:00:00 and I need something like this: 08:00.
Is here an easy way to get 9:00 PM from 5/1/2005 9:00:00 PM withoutdoing:Cast(DATEPART(HOUR,xDate) as varchar(2)) + ':' +Cast(DATEPART(MINUTE,xDate) as varchar(2))lq
I had try calling a function, that call a store procedure, repeatly using a for loop, but I notice it will only get the expected part_id in the first time, and return an empty string sub-sequentially without throwing an exception. So I had try using a sql query instead, but the same thing happen. Below is my function, can you point out to me what's wrong? My original version that calls a store procedure Public Shared Function getPartId(ByVal part_supplierserialnumber As String) As String Dim mySqlCommand As New SqlCommand Dim mySqlConnection As SqlConnection = New SqlConnection(GetERATSConnectionString()) Dim myPart_id As String mySqlCommand.CommandType = CommandType.StoredProcedure mySqlCommand.CommandText = "getPartId" mySqlCommand.Connection = mySqlConnection mySqlCommand.Parameters.Add(New SqlParameter("@part_supplierserialnumber", part_supplierserialnumber)) Try mySqlConnection.Open() myPart_id = mySqlCommand.ExecuteScalar() Catch ex As Exception myPart_id = "" Finally mySqlConnection.Close() mySqlConnection.Dispose() End Try Return myPart_id End Function My Store procedure create procedure getPartId@part_supplierserialnumber as nvarchar(50)as select top 1 part_id from tblPtSingapore where part_supplierserialnumber = @part_supplierserialnumber order by part_datecreated desc
GO The new version I tried which happen the same thing Public Shared Function getPartId(ByVal part_supplierserialnumber As String) As String Dim myPart_id As String Dim strSql As String = "select top 1 part_id from tblPtSingapore where part_supplierserialnumber = '" & part_supplierserialnumber & "' order by part_datecreated desc" Dim mySqlConnection As SqlConnection = New SqlConnection(GetERATSConnectionString()) Dim mySqlCommand As New SqlCommand(strSql, mySqlConnection) Try mySqlConnection.Open() myPart_id = mySqlCommand.ExecuteScalar() Catch ex As Exception myPart_id = "" Finally mySqlConnection.Close() mySqlConnection.Dispose() End Try Return myPart_id End Function
Hello:I run one process that calls the following the store procedure andworks fine.create PROCEDURE sp_GetHostSequenceNumASBEGINSELECT int_parameter_dbf + 1FROM system_parameter_dbtWHERE parameter_name_dbf = 'seqNum'UPDATE system_parameter_dbtSET int_parameter_dbf = int_parameter_dbf + 1WHERE parameter_name_dbf = 'seqNum'ENDGOIf I run two processes that call the above store procedure, I mightoccasionally get the dirty data of int_parameter_dbt. I guess that iscaused by two processes accessing to the same resource simultaneously.Is there any way to lock the store procedure call from MSSQL Serverand allow only one process to access it at a time?Thanks for help.Best Jin
Hi all, I am generating a report dynamically using ReportViewer control. I use a SELECT query to fill the dataset which in turn is used by the ReportViewer to display records. One of the fields is [End Date] and is a DateTime in SQL Server. When the ReportViewer is populated, the End Date field shows the time also with the date. How can I remove that time part? I have used these methods and I want to keep the value as DateTime only and not convert to a string or something. These don't work for me: CAST(FLOOR(CAST(m.[End Date] AS float)) AS datetime)
dear friends.................. i have a table like below.. name date ------------------------------------------------------------------------------------------------------------ anbumani 2/18/2008 4:15:56 PM anbumani 2/18/2008 4:21:29 PM anbumani 2/18/2008 4:23:03 PM anbumani 2/18/2008 4:25:25 PM i want a out put as only time (ex : 4:15:56 PM 4:21:29 PM 4:23:03 PM ) give me the stored procedure code in sql server 2005.. thanks and regards Samuel Chandradoss . J
Trying to extract the time portion from a datetime field. ex 7:15:12 AM from 1/1/2008 7:15:12 aM This is what I tried and neither functions give me the results I want.... SELECT DueTime, CONVERT(varchar, DueDate, 108) AS Expr1, SUBSTRING(CAST(DueDate AS varchar), 10, LEN(DueDate)) AS Expr2, CAST(DueDate AS varchar) AS Expr3FROM TODO Due Time Expr1 Expr2 Expr3 1/1/2008 5:15:00 PM 00:00:00 12:00:00 AM Jan 1 2008 12:00:00 AM It seems Cast(DueDate as varchar) is the problem it converts the time to the default 12:00:00 AM In the above example I want 5:15:00 PM
I have a field that contains only a date, and a field that only contains times. If I try to add the two together, I get some meaningless date like year 2111.
The raw data looks like this EVT_DT='2005-12-05 00:00:00' EVT_TM='2005-12-06 13:59:00' //today's date
I wrote a function that gives me the minutes past midnight for the EVT_TM and use a dateadd(n,myMinutesFuntion(EVT_TM),EVT_DT), but it kills the performance in the nexted cursor.
I have a function that accepts 2 DATETIME parameters. When the user passes a time other than midnight, the function returns a different result. Is there a simple way to strip the time from the variables?