Hi,
I am transferring data from msaccess to sql2005 using foreach loop. I have a table called Students and a column in it called State.
I want to store the value of the State in a variable in the foreach loop. I am using Dataflowtask to transfer rows from access to sql. what component can i use inside dft to store the value of State in a variable.
Plz its urgent
thanku.
Here is my objective:
As part of auditing of our application, I want to write the values of all column in one row out to an audit table both before and after an update to see what the changes were.
I know I can SELECT * FROM tableName FOR XML AUTO to generate a single XML 'column', but I cannot figure out how to capture that output and store it.
According to MS, you cannot use FOR XML in a subselect, or fill a TEXT variable with the results of such (which, IMHO really diminishes the usefulness).
I want to stream out the results of one entire row and store that in ONE column of an audit table. XML seems like the easiest way if not for this limitation.
A better way?
Thanks.
I have a few flat files that will be retrieved from some SFTP server. One of the flat file will act as a terminal file where it will specify the total number of records expected in each other the flat file.
Data in the terminal.txt
FileName TotalRecords
File1 1000
File2 1500
File3 2000
So, before transforming the data from the flat file sources into the target destination, i wish to do a row count checking for each of the flat file source to make sure that the number of records in the flat file source is tally with the number of records specify in the terminal.txt file. I'm able to get the number of records in each of the flat file by using the RowCount component but don't know how to get the data out from the terminal.txt file in order to make a rowcount comparison.
Can any1 help me on this? Or is there any other way we can do to make sure that the flat file source is alright before proceeding with the data transformation task?
Thanks!
Hi
View 7 Replies View RelatedI having a strange problem, my code is as below: cmd.connection = cnncmd.commandtext = "select count(*) from member" dim i as integeri = cInt(cmd.executescalar) However, what the result tat i get is "&H0" ! When I use the same query in sqlquery, it did show out the result as "11".I have no idea abt wat is goin on, can anyone gv me some guide ? Thanks.
View 2 Replies View RelatedHi,
I have a question. I have a standard query that retrieves the list of users from a database. The query uses "exist" statement and inside it I have another smaller query. The smaller query which used withing exist statement is called numerous times during the query execution. I am wondering if I can speed things up by storing result of a smaller query in a table rather than asking DB to run it again and again. The query takes over a minute to run and I am trying to find a way of speeding it up.
Thanks a lot
Serge
This is my stored procedure .It is working fine .I want to capture the output in a print statement .Can anyone help me please .
alter proc r (@id INT)
as
BEGIN
DECLARE @input VARCHAR(800)
DECLARE @c_input INT
DECLARE @i_Input INT
DECLARE @input_left VARCHAR(800)
DECLARE @delimiter CHAR(1)
select @delimiter = ','
DECLARE @in VARCHAR(800)
DECLARE @list VARCHAR(800)
declare @list2 VARCHAR(800)
SET @input = 'AWCA,GCS,IHP,Aetna'
select @c_input = (select dbo.Fx_CharCount(@delimiter,@input))
set @c_input = @c_input + 1
while @c_input > 0
BEGIN
select @i_input = charindex(@Delimiter,@input)
if @i_input != 0
BEGIN
select @input_left = left(@input, @i_input - 1)
END
else
select @input_left = @input
select @in = '''' + @input_left + ''''
select @list = ISNULL(@list + ',', '') + @in
select @input = right(@input ,(len(@input) - @i_input))
SET @c_input = @c_input -1
if @c_input = 0 or @input = @input_left
break
end
Print @list
EXECUTE ('SELECT Label FROM repricingsystemtype WHERE Label Not IN (' + @list + ')')
END
Can anyone tell me or point me in the direction of how I can store select query results to a variable in VB.NET? Im using the SqlDataSource control with dropdowns and textboxes for searching. I want to store the search results in a variable on the button click event.
View 2 Replies View RelatedI have image type col.I'm trying to do the following,DECLARE @Data varbinary(16)SET @Data = (select imageCol from Table1 where id=3)As image datatype returns varbinary value, so I want to store image col value to a varbinary variable(or any other type variable, eg., varchar). But getting following error,========================================Server: Msg 279, Level 16, State 3, Line 2The text, ntext, and image data types are invalid in this subquery or aggregate expression.========================================Is there anyway to store image datatype value to a variable?Cheers.
View 2 Replies View RelatedI want to declare a variable that will serve as my where clause. The variable will be passed in from our website. Does anyone have any information or can guide me in the right direction to do this?
example:
@variable varchar(1000)
SELECT *
FROM table
WHERE @variable
(The @variable would reflect the where clause string)
Thanks!
Hi there, I should prefix this message by saying, I am brand new to SQL so please be gentle
What I am doing seems pretty standard and I'd like some advice on the best way to proceed.
I am simply trying to add some customer information to my database. For this I have set up two tables. One for the Customer name, title, etc and then a related table for the address which is referenced in the previous table by a AddressID.
In the address table the AddressID uses an Identity. So what I'd like to do (which may not be the best way, if so tell me) is write a stored procedure to accept all of the customer information then INSERT a new entry into the Addresses table, then use DBCC to retrieve the current IDENTITY value and then add the remaining customer info into the Customers table using the IDENTITY value retrieved for the AddressID.
Now is that a total bass-ackwards way of doing this?
Thanks for the help!
I'm looking for a way to store a list of values in a variable. The query user will need to input a list of file numbers, and my query will need to perform a couple operations on that same list of values, which is why it seems a variable would be most appropriate.
I can't obtain the list of values from the database as they will have to be entered by the user. I'm imagining storing these in a table variable.... User just copies/pastes the list of values somewhere into the query code and executes as usual.
Help - I am having a moment!
I am building a simple package that looks at the results of a sql query, prior to running the next step.
Basically Outline and settings
SQL task
Result Set: Full result set
SQL Source: Direct Input
SQL Statement: Select Count (*) FROM X
Parameter Mapping
Variable Name: User::C
Direction: Return Value
Data Type: Numeric
Parameter Name: NewParameterName
Result Set = NewResultName: User::C
Precedence Constraint
Evaluation Operation: Expression and Constraint
Value: Success
Expression: @C > 0 ( I originally tried User::C and received an error message)
Execute SQL Server Agent Job
If step one results greater than 1, then execute the SQL agent job (SRS Report)
Using this setup I receive an error message stating "
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package: The expression "@C > 0" must evaluate to True or False. Change the expression to evaluate to a Boolean value.
Error at Package: There was an error in the precedence constraint between "Execute SQL Task" and "Execute SQL Server Agent Job Task".
(Microsoft.DataTransformationServices.VsIntegration)
Any thought or suggestions would be greatly appreciated.
r/ Anthony
Hi,
Does anyone know a way to store the ConnectionString of an OLEDB connection in a variable? I want to see exactly what values are in there because the step is failing with an error at that point. Here is what I'm looking for:
Data Source=;Initial Catalog=;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;
Thanks,
Phil
Hi All,
I need to store the row count from two different servers (one 6.5 and one 7.0)
to compare by doing this:(in T-SQL)
declare @kount1 int, @kount2 int
exec master..xp_cmdshell 'isql -Sserver65 -d dbA -T -Q "select count(*) from tableA",no_output
exec master..xp_cmdshell 'isql -Sserver70 -d dbA -T -Q "select count(*) from tableA",no_output
How can I save the rowcount in @kount1, @kount2 respectively for comparison?
Appreciate your feedback.
David Nguyen
I have duplicate records in table.I need to count duplicate records based upon Account number and count will be stored in a variable. I need to check whether count > 0 or not in stored procedure.I have used below query.
SELECT @_Stat_Count= count(*),L1.AcctNo,L1.ReceivedFileID from Legacy L1,Legacy L2,ReceivedFiles where L1.ReceivedFileID = ReceivedFiles.ReceivedFileID
and L1.AcctNo=L2.AcctNo group by L1.AcctNo,L1.ReceivedFileID having Count(*)> 0
IF (@_Stat_Count >0)
BEGIN
SELECT @Status = status_cd from status-table where status_id = 10
END
I wrote a stored procedure that finds a number. I want to store the number it finds into a variable so i can use it within another procedure.
I hope i'm being clear.
Any help will be appreciated.
Here is an example of how i am finding my number
Employee is the name of my table and Number is the name of my column.
SELECT Max(Number)
FROM Employee
I have a dynamic query which returns me a result and I want to capture that value to make further use of it in the same code. Is that possible??
exec ('select col_nm from table_name'). i want the result of this query to be captured.
DP
I'm sure this is a very simple piece of code, but I'm having trouble understanding how to do this.
First I have a database with three columns
ContactID
name age weightaaa 23 50bbb 23 60ccc 22 70ddd 24 20 eee 22 30i need the output that calculate the sum of weight group by name input : age limit ex: 22 - 23 output : age total weight 23 11022 100 this output must stored in a sql declared variable for some other further process .
View 7 Replies View RelatedI have a stored procedure that returns XML using FOR XML Explicit. I need to use the output of this procedure in another procedure, and modify the xml output before it is saved somewhere.
Say StoredProc1 is the one returning xml output and StoredProc2 needs to consume the output of StoredProc1
I declared a nvarchar(max) variable and trying to saved the result of StoredProc1
Declare @xml nvarchar(max)
EXEC @xml = StoredProc1 @Id
This doesn't work as expected as @xml doesn't get any value assigned or rather I would say
EXEC @xml = StoredProc1 @Id
outputs the entire xml whereas it should just save the xml in a variable.
I have one package through for each loop container I am loading all flat files into target table and its working fine.Now I my requirement is to capture the .txt file and loading into sqlserver table.Please check below file name.
CCCLOC_DDDLOC_LOC_20151203_240000_trigger.txt
from above file name I have to derived below detail.I have variable @File_Name which is used to stored the file name at rune time.Now I want to derived 5 values from the file name as below
Clientname=CCCLOC
Partnername=DDDLOC
Entity=LOC
Creationdate=20151203
Creationtime=240000
how to write expression for above situation.
I cannot find the data type for parameter mapping from Execute SQL Task Editor to make this works.
1. Execute SQL Task 1 - select max(columnA) from tableA. ColumnA is varbinary(8); set result to variable which data type is Object.
2. Execute SQL Task 2 - update tableB set columnB = ?
What data type should I use to map the parameter? I tried different data types, none working except GUI but it returned wrong result.
Does SSIS variable support varbinary data type? I know there's a bug issue with bigint data type and there's a work-around. Is it same situation with varbinary?
Thanks,
-Ash
Im trying to determine the best way to store data gathered from a form that a user will fill out online. The form is dynamic and is customized at run time based on group-specific criteria. The end result is a form that might have 3 extra text boxes, 2 extra sets of radio buttons and a freeform textbox, whereas for another group, there might be a slightly different set of input fields. Now comes the issue of storing this data. Since the fields can be somewhat dynamic, it could get tricky to define table columns for each possible input field. So Im considering storing the data as xml. Has anyone else had to build custom forms and ended up storing the data as xml ?
View 2 Replies View Relatedcreate table #t
(
id int,
col1 decimal(18,2)
)
go
[Code] ...
-- I want to subtract @X and col1. But my variable @X must be reduced for each value in col1 for each next row until it reaches zero.
-- OUTPUT:
-- id col1 col2
--@X at starting point is 15000
-- 1 5000.00 0 --@X IS 10000 = 15000 - 5000(col1)
-- 2 1000.00 0 --@X IS 9000 = 10000 - 1000
-- 3 10000.00 1000.00 --@X IS 1000 = 9000 - 10000
-- 4 12000.00 12000.00
-- 5 300.00 300.00
-- 6 35000.00 35000.00
--in col2 i just put zero where col1 is substract from @X and continue for every subsequent order.
-- in 3 row value is 1000 becouse @X is that big (1000 left from col1)
How do I store a PDF in a table column?
for example
I want to store "c:est.pdf" in myTable.ColumnName
Please help!
Is it possible to use a stored procedure to fill the default value of a column when i'm building the db? i mean if i can use a stored procedure for the "colum property": "default value or bnding" if yes how can i do it?
View 2 Replies View RelatedWe have a table with 10 columns each column is of datatype int and can accept nulls, when I do a save is it better to have 0 inserted in to the column or just insert null?
View 9 Replies View RelatedI have xml string that needs to be stored in a field in the DB. I was looking for recommendations for the data type I can use in such a scenario.
View 1 Replies View RelatedHello,
In my application, I have a master table that stores information about some other user tables. These other tables are all of different types, that is, the number and type of columns need not match across the user tables.
From the application perspective, logically each of these user tables is nothing but a column field within the master table.
I have seen references about "table" data type in SQL Server. It is possible to create a table that actually has a table data type as its field?
Thank you in advance for your help.
Regards,
Peter
Hi
I would like to is there any way we can store mathematical equations, that can be typed using equations 3.0, in sql server database as a column. What would be the datatype for the same.
Thanks
Hi,
I'm wondering is it possible to store query result to column directly?
for example I have 2 tables
Cache
----------
Cache_ID (int)
Cache_content (Text)
cache_created (Datetime)
Orders
-------------
Order_ID
Order_amount
Order_Date
Order_Delivered
and the query is
select * from order where order_date = '2007-11-23' and 'Order_delivered='N'
I want the result to be stored in cache table either csv or xml
I'm using sql 2000 server.
any idea?
i am using asp.net 2005 with sql server 2005. in my database table contains
Table Name : Page_Content
Page_Id
101
102
1
Abc
Pqr
2
Lmn
oiuALTER PROCEDURE [dbo].[SELECT_CONTENT]
(@lang_code varchar(max))
AS
begin declare @a as varchar(max)set @a = @lang_code
Select page_id,@a From page_content
end
Here in this above store procedure i want to pass 101 to @lang_code
here is my output, but this is wrong output
Page_Id
Column1
1
101
2
101
but i want following output
Page_Id
101
102
1
Abc
Pqr
2
Lmn
oiu