I have a store procedure that works fine when tested in SQL Management Studio and Visual Studio but when I actually running the page in a browser, it does not work. There is no result generated. Below is my store procedure.1 ALTER PROCEDURE [dbo].[spSearch]
2 -- Add the parameters for the stored procedure here
3 @schoolID int = NULL,
4 @scholarship varchar(250) = NULL,
5 @major varchar(250) = NULL,
6 @requirement varchar(250) = NULL
7 --@debug bit = 0
8 AS
9 BEGIN
10 -- SET NOCOUNT ON added to prevent extra result sets from
11 -- interfering with SELECT statements.
12 SET NOCOUNT ON;
13
14 -- Insert statements for procedure here
15
16 Declare @SQL as NVarchar(4000);
17 Declare @Params as NVarchar(3000);
18 Set @SQL = N'SELECT * FROM [scholarship] WHERE [sectionID] = @schoolID';
19 Set @Params = N'@schoolID int,@scholarship varchar(250),@major varchar(250),@requirement varchar(250)'
20
21 If @scholarship IS NOT NULL
22 Set @SQL = @SQL + N' AND [scholarship].[schlrName] LIKE + ''%'' + @scholarship + ''%'''
23 If @major IS NOT NULL
24 Set @SQL = @SQL + N' AND [scholarship].[Specification] LIKE + ''%'' + @major + ''%'''
25 If @requirement IS NOT NULL
26 Set @SQL = @SQL + N' AND ([scholarship].[reqr1] LIKE + ''%'' + @requirement + ''%'''
27 If @requirement IS NOT NULL
28 Set @SQL = @SQL + N' OR [scholarship].[reqr2] LIKE + ''%'' + @requirement + ''%'''
29 If @requirement IS NOT NULL
30 Set @SQL = @SQL + N' OR [scholarship].[reqr3] LIKE + ''%'' + @requirement + ''%'''
31 If @requirement IS NOT NULL
32 Set @SQL = @SQL + N' OR [scholarship].[reqr4] LIKE + ''%'' + @requirement + ''%'''
33 If @requirement IS NOT NULL
34 Set @SQL = @SQL + N' OR [scholarship].[reqr5] LIKE + ''%'' + @requirement + ''%'')'
35 --If @debug = 1
36 --PRINT @SQL
37 Exec sp_executesql @SQL, @Params, @schoolID, @scholarship, @major, @requirement
38 END
39
Hi guys. I have been struggling for days now to store the result of a stored procedure from a linkedserver. To make a long story short, here is my code...
CREATE PROCEDURE F_GET_KRONOS_HRS @wono varchar(12) AS BEGIN declare @str nvarchar(2000) declare @a varchar(10)
create table #t (paycode varchar(7), hrs varchar(255)) insert into #t exec sp_executesql @str select @a = hrs from #t where paycode='ST' drop table #t print @a
if i call exec sp_execute @str, it will output this PAYCODE HRS ------- -------- ST 08: 30 OT 54: 00
(2 row(s) affected)
I want those #'s store into a temp variable OR be passed to another procedure. HOW DO I DO IT. This is the last step holding me back from completing my DataWareHouse.
I wrote a stored procedure that finds a number. I want to store the number it finds into a variable so i can use it within another procedure. I hope i'm being clear. Any help will be appreciated. Here is an example of how i am finding my number Employee is the name of my table and Number is the name of my column.
I use new query to execute my store procedure but didnt return any value is that any error for my sql statement??
USE [Pharmacy_posicnet] GO /****** Object: StoredProcedure [dbo].[usp_sysconf] Script Date: 22/07/2015 4:01:38 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER procedure [dbo].[usp_sysconf]
name age weightaaa 23 50bbb 23 60ccc 22 70ddd 24 20 eee 22 30i need the output that calculate the sum of weight group by name input : age limit ex: 22 - 23 output : age total weight 23 11022 100 this output must stored in a sql declared variable for some other further process .
I have a stored procedure that returns XML using FOR XML Explicit. I need to use the output of this procedure in another procedure, and modify the xml output before it is saved somewhere.
Say StoredProc1 is the one returning xml output and StoredProc2 needs to consume the output of StoredProc1
I declared a nvarchar(max) variable and trying to saved the result of StoredProc1
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
One column in my table stores SQL queries(QueryCoulmn). Another coulmn supposed to store the result of those queries(ResultColumn). Can I run an update query or how can I do that? I could not figure out the syntax.
update tablename set ResultColumn=exec(QueryCoulmn)
When Station = 'D_CC' then Cycle_Index suppose to start a new cycle. So my problem is trying to find the next 'D_CC' and store the incremental cycle # in a New_Cycle column.
Updated: Sorry to confuse you by changing the text color!
Case when Station = 'D_CC' then Cycle_Index = Cycle_Index + 1; based on the prior cycle # and continuos to find next 'D_CC' until the end; regardles whatever in between the prior D_CC to next D_CC.
Bottom line is searching the next value from Station = D_CC then cycle # in Cycle_Index column need to be incremented by 1 and stored the new cycle # in New_Cycle column as the actual cycle.
I am building a simple package that looks at the results of a sql query, prior to running the next step.
Basically Outline and settings
SQL task
Result Set: Full result set
SQL Source: Direct Input
SQL Statement: Select Count (*) FROM X
Parameter Mapping
Variable Name: User::C
Direction: Return Value
Data Type: Numeric
Parameter Name: NewParameterName
Result Set = NewResultName: User::C
Precedence Constraint
Evaluation Operation: Expression and Constraint
Value: Success
Expression: @C > 0 ( I originally tried User::C and received an error message)
Execute SQL Server Agent Job
If step one results greater than 1, then execute the SQL agent job (SRS Report) Using this setup I receive an error message stating "
TITLE: Package Validation Error ------------------------------ Package Validation Error ------------------------------ ADDITIONAL INFORMATION: Error at Package: The expression "@C > 0" must evaluate to True or False. Change the expression to evaluate to a Boolean value. Error at Package: There was an error in the precedence constraint between "Execute SQL Task" and "Execute SQL Server Agent Job Task". (Microsoft.DataTransformationServices.VsIntegration)
Any thought or suggestions would be greatly appreciated.
I excute sp_columns in my Stored Procedure script to get the data type of a table column. EXEC sp_columns @table_name = 'XXX', @column_name='YYY' How do i store the column 'TYPE_NAME' in the return row into a variable so that i can use it later in my stored procedure? Thanks Hannah
I have a dynamic query which returns me a result and I want to capture that value to make further use of it in the same code. Is that possible?? exec ('select col_nm from table_name'). i want the result of this query to be captured. DP
First, I have that code whenever i disregard the "having ranges<=3" it selects record but when I include it it returns error. The problem is I want to just select records with ranges less than 3 miles..how do I do that.. and I want to count the number of selected rows and store it on a column on the same table.
I wanted to insert the result-set of a Exec(@sqlcommand) into a temp table. I can do that by using:
Insert into #temp Exec(@sqlcommand)
For this to accomplish we need to define the table structure in advance. But am preparing a dynamic-sql command and storing that in variable @sqlcommand and the output changes for each query execution. So my question is how to insert/capture the result-set of Exec(@sqlcommand) into a temp table when we don't know the table structure.
I cannot find the data type for parameter mapping from Execute SQL Task Editor to make this works.
1. Execute SQL Task 1 - select max(columnA) from tableA. ColumnA is varbinary(8); set result to variable which data type is Object.
2. Execute SQL Task 2 - update tableB set columnB = ? What data type should I use to map the parameter? I tried different data types, none working except GUI but it returned wrong result.
Does SSIS variable support varbinary data type? I know there's a bug issue with bigint data type and there's a work-around. Is it same situation with varbinary?
We have some reports run quite slow because the queries are complicate and tables are large. So we create a materialized view in Oracle which store the result from the query and refresh it occationally. How to do this in MSSQL? I try the indexed view but seems it has lots of restrictions, our query has sub queries and cross database table joins so can't use the indexed view. Any other object or temp table can be used to cache the report data and be accessed globally by other procedures?
My store Procedure is not save in Strore Procedure folder at the time of saving it give me option to save in Project folder and file name default is SQLQuery6.sql when i save it after saving when i run my store procedure
exec [dbo].[SP_GetOrdersForCustomer] 'ALFKI'
I am getting below error :
Msg 2812, Level 16, State 62, Line 1 Could not find stored procedure 'dbo.SP_GetOrdersForCustomer'.
Hi guysi would really appreciate your help here. what am i doing wrong with this stored procedure ALTER PROCEDURE usp_CreateNewCustomer( @LName as varchar(50), @FName as varchar(50), @Dept as varchar(50)=NULL, @PhoneType as varchar(50)=NULL, @Complete as Bit=NULL, @CustomerID as Int OUTPUT, @FaxModel as varchar(50)=NULL, @FaxNumber as varchar(50)=NULL, )ASINSERT INTO [CustomerInfo] ([LName], [FName], [Dept], [PhoneType], [Complete]) VALUES (@LName, @FName, @Dept, @PhoneType, @Complete)SELECT SCOPE_IDENTITY()INSERT INTO Extras (CustomerID, FaxModel, FaxNumber) VALUES (@CustomerID, @FaxModel, @FaxNumber)RETURN It keeps on complaning "'usp_CreateNewCustomer' expects parameter '@CustomerID', which was not supplied."thanks
Hi all, I have a few question regarding SPROC. Firstly, I want to create a sp, that will return a multiple column of data, how do you achieve that. Secondly, I want to create a store procedure that will return a multiple columns in a cursor as an output variable. Any help will be much appreciated. Can you have more then 1 return parameters??? Thanks. Kabir
I have asp.net web application which interface with SQL server, I want to run store procedure query of SQL using my asp.net application. How to declare connectons strings, dataset, adapter etc to run my store procedure resides in sql server. for Instance Dim connections as string, Dim da as dataset, Dim adpt as dataadapter. etc if possible , then show me completely code so I can run store procedure using my button click event in my asp.net application thank you maxmax
I am not sure if it is right place to ask the question. I have a store procedure in which funcitons are called and several temp tables are created. When I use sql analyzer, it runs fast. But when I called it from asp.net app, it runs slow and it waits and waits to get data and insert into temp tables and return. Though I have used with (nolock), it still not imprvoed. Any suggestions? Thanks in advance. NetAdventure
Hello, I am very new to ASP.NET and SQL Server. I am a college student and just working on some project to self teaching myself them both. I am having a issue. I was wondering if anyone could help me. Ok, I am creating a web app that will help a company to help with inventory. The employee's have cretin equipment assign to them (more then one equipment can be assigned). I have a search by equipment and employee, to search by equipment the entire database even then equipment that isn't assigned with the employee's it shows only that employees and if they have any equipment. They can select a recorded to edit or see the details of the record. The problem i am having is that the Info page will not load right. I am redirected the Serial Number and EmployeeID to the info page. I got everything working except one thing. If a person has more then one equipment when i click on the select it redirect and only shows the first record not the one I selected. and when i change it, a employee that doesn't have equipment will not show up totally.
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNo EmployeeID and SerialNo are primary keys. I was thinking maybe create a store procedures, but I have no idea how to do it. I created this and no syntax error came up but it doesn't work CREATE PROCEDURE dbo.inventoryinfo AS DECLARE @EmployeeID int DECLARE @SerialNo varchar(50) IF( @SerialNo is NULL) SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID ELSE SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNoGO Also, when a user selects the select button in either Employee search or Equipment search it redirects them to info.aspx. Should I create a different aspx page for both? But I don't believe I should do that. I don't know if I gave you enough information or not. But if you could give examples that would be wonderful! Thanks so much Nickie