Stored Proc Parameters Slowing Down Execution Majorly!
Jan 15, 2008
Hello:
Interestingly enough, I haven't come across this before. I have a SQL stored procedure which takes four parameters; periodstartdate (datetime), periodenddate (end time), hsgradyearstart (int), hsgradyearend (int)
[dbo].[CalculateActivityTotal]
-- Add the parameters for the stored procedure here
@periodstartdate datetime = '2007-01-01',
@periodenddate datetime = '2007-01-08',
@hsgradyearstart int = 1900,
@hsgradyearend int = 2007
AS...
If I run the stored procedure and pass the parameters using EXEC or
sp_executesql "CalculateActivityTotal '2008-01-04 12:00:00', '2008-01-11 12:00:00', 1900, 2008"
the stored proc takes well over ten minutes to run (it does a bunch of aggregation). If I modify the stored procedure to take no parameters, however, and I hardcode the dates in the stored proc using declare and set then it runs in 13 seconds. What could be causing my problem and how I can I go about resolving this? I need to pass the parameters via reporting server. Thanks!
View 2 Replies
ADVERTISEMENT
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Aug 23, 2007
after moving off VS debugger and into management studio to exercise our SQLCLR sp, we notice that the 2nd execution gets an error suggesting that our static SqlCommand object is getting reused from the 1st execution (of the sp under mgt studio). If this is expected behavior, we have no problem limiting our statics to only completely reusable objects but would first like to know if this is expected? Is the fact that debugger doesnt show this behavior also expected?
View 4 Replies
View Related
Oct 19, 2006
Hi everyone! Good day!
I'm not really sure if my question should fall on Service Broker or T-SQL, but I hope someone helps me with this... After activating the stored procedure assigned to the queue, is there any way for me to find out if the stored procedure is already finished executing?
I have successfully sent messages to my queue but I have no way to know if all the processing is already done.
Thanks so much!
View 4 Replies
View Related
Nov 13, 2004
I want to dynamically build a page for a given stored proc.
Given the name of the sproc how can i return the names, datatypes & sizes of the parameters ?
I then needs to find the fields in the result set to generate the page.
Any ideas ?
View 4 Replies
View Related
Jul 3, 2015
I have a stored proc that is executing in 2 sec on production and test database. It is taking more than a min on dev environment.
I have verified sqlserver version is same on both of the server.Prod is running on 2012Sp1 however dev don't have sp1. I am downloading it.
Both are 64bit, has same collation and compatibility level.I have confirmed that sp on both servers has same execution plan. I have reset and import stats from prod too.
View 8 Replies
View Related
May 19, 2004
Title speaks for itself really.
Is it possible to write a stored proc with optional parameters?
For example consider the following SELECT
SELECT FLD1, FLD2 FLD3 FROM TBL1
I'd like to add optional parameters to that statement so that if they wanted to narrow down the results by providing criteria for some fields they could - but didn't have to.
Is this possible?
View 4 Replies
View Related
Jan 24, 2007
If a procedure is known but all parameters are not known, can I handle this using CommandBehavior.RetrieveParameters.
If yes, do I need to incur an extra round trip to server.
View 1 Replies
View Related
Oct 23, 2007
I have created a stored proc for a report, which works fine. I want to have the user enter a project ID to filter the report, so set the stored proc accordingly. However, I want the user to enter a 10 digit ID, which is the equivilent of two fields in the stored proc. My where statement is :
Where actv.ProjID + '-' + actv.Activity = @project
This works fine under the data tab, I can enter a full project and get the results I want. But I cannot preview the report without getting an error. I'm not sure how to add this to the report parameters, as it is two fields concatenated together. Any help would be appreciated!
View 3 Replies
View Related
Dec 3, 2003
I have a stored procedure that updates about a dozen rows.
I have some overloaded functions that I should update different combinations of the rows - 1 function might update 3 rows, another 7 rows.
Do I have to write a stored procedure for each function or I can I handle it in the Stored Procedure. I realise I can have default values but I the default values could overwrite actual data if the values are not supplied but have been previously written.
Many thanks for any guidance.
Simon
View 5 Replies
View Related
Mar 17, 2006
I have the following ASP code that builds part of the example SQL statement below (it's the same SQL as in my earlier thread here (http://www.dbforums.com/showthread.php?t=1214044) but a very different question):
if sFindTicketEventId > 0 then sSQL = sSQL & " AND [tblEvents].[id]=" & sFindTicketEventId
if sFindTicketStandId > 0 then sSQL = sSQL & " AND [tblStands].[id]=" & sFindTicketStandId
SELECT
[tblC].[id] AS CombinationID,
[tblC].[availability],
[tblC].[description],
[tblC].[price] AS combinationPrice,
[tblC].[combination_open],
[tblT].[TicketID] AS TicketID,
[tblT].[price] AS ticketPrice,
[tblT].[availability],
[tblT].[ticket_open],
[tblT].[quantity],
[tblT].[event_name],
[tblT].[event_open],
[tblT].[stand_name],
[tblT].[stand_open],
[tblT].[admission_start_date],
[tblT].[admission_end_date],
[tblT].[date_open],
[tblT].,
[tblT].,
[tblT2].[description],
[tblT2].[admin_description]
FROM(
SELECT
[tblCombinations].[id],
[tblTickets].[id] As TicketID, [tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
FROM [tblCombinations]
LEFT JOIN [tblCombinations_Tickets] ON [tblCombinations_Tickets].[combination_id] = [tblCombinations].[id]
LEFT JOIN [tblTickets] ON [tblCombinations_Tickets].[ticket_id] = [tblTickets].[id]
LEFT JOIN [tblEvents] ON [tblEvents].[id] = [tblTickets].[event_id]
LEFT JOIN [tblStands] ON [tblStands].[id] = [tblTickets].[stand_id]
LEFT JOIN [tblAdmissionDates] ON [tblAdmissionDates].[id] = [tblTickets].[admission_date_id]
LEFT JOIN [tblBookingDates] ON [tblBookingDates].[id] = [tblTickets].[booking_date_id]
LEFT JOIN [tblTicketConcessions] ON [tblTicketConcessions].[id] = [tblTickets].[ticket_concession_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMinQuantities] ON [tblBookingMinQuantities].[id] = [tblTickets].[booking_min_quantity_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMaxQuantities] ON [tblBookingMaxQuantities].[id] = [tblTickets].[booking_max_quantity_id]
LEFT JOIN [tblMemberships] ON [tblMemberships].[id] = [tblTickets].[membership_id]
WHERE 1=1
[B]AND [tblEvents].[id]=2
[B]AND [tblStands].[id]=3
--AND [tblAdmissionDates].[id]=@admissionDateId
--AND [tblBookingDates].[id]=@bookingDateId
--AND [tblTicketConcessions].[id]=@concessionId
--AND [tblBookingMinQuantities].[id]=@bookingMinQuantityId
--AND [tblBookingMaxQuantities].[id]=@bookingMaxQuantityId
--AND [tblMemberships].[id]=@membershipId
GROUP BY
[tblCombinations].[id],
[tblTickets].[id],
[tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
) as [tblT]
JOIN [tblCombinations] as [tblC] on [tblT].[id]=[tblC].[id]
LEFT JOIN [tblTickets] as [tblT2] on [tblT].[TicketID]=[tblT2].[id]
I want to turn this SQL into a stored proc; there are currently about 8 parameters that I want to pass into it. The field value for each will be either NULL or a positive integer, and the paramater will be passed in as an integer.
If the passed parameter value is a positive integer then it should return all records where the corresponding field value matches that integer. If the passed parameter is 0, it should return all rows regardless of whether the field value is an integer or NULL.
And I can't for the life of me figure out how to do it. Do I need an IF statement in there or something?
:confused:
View 2 Replies
View Related
Jul 30, 2007
Hello,
I have a number of multi-select parameters which I would like to send to a stored procedure within the dataset for use in the stored procedure's IN() statement which in turn is used to filter on or out particular rowsets.
I considered using a hidden string parameter set = " ' " + join(parameter.value, ',') + " ' " so that the hidden parameter would then contain a comma delimiated string of the values selected, which would then be sent on to the stored proc and used in the WHERE clause of one of the queries internal to the stored proc.
But before I start dedicating time to do this I wanted to inquire if anyone here with far more expertise could think of a faster or less system heavy method of creating a single string of comma delimited parameter selections?
Thanks.
View 3 Replies
View Related
Jun 19, 2003
Is there anyway to force sql server to use the same execution plan?
One of the sp for web page takes about 2 minutes to execute. Once it's executed through query analyser, it takes relatively less time.
Is there any explanation for this?
View 5 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Aug 3, 2007
Hello :
How to execute a procedure stored during execution of the report, that is before the poster the data.
Thnak you.
View 4 Replies
View Related
Apr 9, 2007
I need to script the execution of reports with input parameter values and with the report output going to PDF in a local file location on the server. I can't use traditional Report Server scheduling because I have to loop through a list of clients and execute the report for each client.
I appreciate any help you can offer.
View 4 Replies
View Related
May 29, 2007
Is there a way to schedule report snapshots and still give users the option to change the parameters? I found that report parameters are disabled when I set the execution options to use a snapshot. I fixed the problem by setting the report to use cached data that expires on a custom schedule and by scheduling an e-mail subscription that creates a new report cache soon after the cache expires. I'm guessing there must be a better way to provide good report performance with the default parameters as well as flexibility.
View 1 Replies
View Related
Feb 20, 2003
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
View 1 Replies
View Related
Jan 13, 2006
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
View 5 Replies
View Related
Jan 20, 2004
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
View 14 Replies
View Related
Aug 30, 2007
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
View 2 Replies
View Related
Jan 10, 2007
Hello!Is it possible to pass a stored procedure a parameter, say @table anduse it as a table in the sql command?Finally i want a proc to copy tables from a database to another database.THERE IS MY CODE:CREATE PROCEDURE [user].[copytable]@dbSRC varchar(100),@dbTRGT varchar(100),@table varchar(100)ASBEGIN TRANSACTION FreeAndCopyTableTRUNCATE TABLE [@dbTRGT].admin.[@table]INSERT INTO [@dbTRGT].admin.[@table]SELECT *FROM [@dbSRC].admin.[@table]COMMIT TRANSACTION FreeAndCopyTableIF @@error <0 GOTO E_Copy_FailE_Copy_Fail:ROLLBACK TRANSACTION FreeAndCopyTableGOthanks in advance,muh
View 2 Replies
View Related
Aug 31, 2007
I have a couple of questions that I hope someone might be able to provide some direction on.
1. Why can't you call a proc when the proc uses temp tables? I wrote a simple proc (select * from table) and the data subscription works perfect. I then take that same query and put it into a temp table and the data set can't be validated by the subscription, Why?
2. Why can't you pass a simple execute statement in a data subscription? (execute dbo.RptTakeTheLeadFLSDinnerCompetition @FiscalQuarter ='2007-Q3', @StoreRegionID = '9231', @StoreType = 'Full-Line Store') works perfect in SQL but once you try and validate in the data subscription is fails.
3. Another question, why if I dumb down the proc and the number of parameters does it work? Are there limitations on the number of parameters you can pass into a proc from a data driven subscription?
Basically, I want to declare a few variables dynamically and pass them into a execute statement that calls the proc. Which in turn runs the report.
Any ideas on where I seem to be going wrong?
View 3 Replies
View Related
Mar 12, 2008
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
View 29 Replies
View Related
Oct 14, 2007
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies
View Related
Jun 3, 2003
hello,
i am getting a problem
suddenly the DB in Sql2000 has slowed down drastically
and when i have checked the logs the error is
Supersocket info:[spn register]:error 1355
pls. help me
pavan
View 2 Replies
View Related
Dec 4, 2006
I'm running into an issue when developing a clr project. I open the project to make changes and apparently it hoses up the sql server that I'm connecting to. I'm opening the CLR Project from a mapped drive on another computer. I can't figure out why just opening up the project causes the slow down. Any ideas.
Thanks,
Josh
View 1 Replies
View Related
Apr 23, 2008
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
View 1 Replies
View Related
May 29, 2001
We have a process here where a ~45Gb is copied from DB1 to DB2 (both on the same server) using the Export Data wizard and choosing the "Transfer objects and data between SQL Server 7.0 databases" - All the defaults are left as is.
Under 6.5 this method took around 24 - 26 hours, now with SQL 7.0 (SP3) it takes about 16 hours. That's great execpt towards the end of the copy it seems to be hogging most of the server resources - although the processors aren't mazed out.
Users of the other databases are having queries take 5+ mins when they normally come back in < 5 seconds. As soon as the copy finishes there query time return to 'normal'.
Anyone any ideas on where to start looking or how to analyse this problem.
Thanks in advance.
Rob Elmes
View 2 Replies
View Related
Mar 14, 2007
hi guys,
the following test script works fine and displays a list of cars from the fairly small database, but if I specify the sort order in the querystring, the page takes ages to display and usually times out. Can someone look over it please and tell me where I can fine-tune it for performance or redundant code?
thanks
M
<%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%>
<%
Dim oRS,oConn,myOrder,strSQL
Set oRS = Server.CreateObject("ADODB.Recordset")
Set oConn = Server.CreateObject("ADODB.Connection")
'next, a couple of test lines to prevent timeout (seems to have no effect)
oConn.CommandTimeout = 0
Server.ScriptTimeout = 0
Set strOrder = Request.QueryString("Order")
oConn.ConnectionString = "Provider=MSDASQL;DRIVER=SQL Server;SERVER=address;UID=userID;PWD=password;DATA BASE=name"
oConn.Open
%>
</head>
<body>
<%
strSQL = "Select make,model,price from vehicles where cat = 'car' AND active = 'yes'"
if strOrder <> "" then
strSQL = strSQL & " ORDER BY " & strOrder
end if
oRS.Open strSQL, oConn, 2, 3
oRS.moveFirst
Do while not oRS.eof
make = oRS("make")
model = oRS("model")
price = oRS("price")
%>
<%=make%> <%=model%> <%=price%><BR>
<%
oRS.MoveNext
loop
oRS.close
set oRS= nothing
oConn.close
set oConn=nothing
%>
</body>
</html>
View 14 Replies
View Related
Jul 20, 2005
I've been doing some experiments with speeding up copying tables ofapproximately 1 million rows between databases using BCP and BULK INSERT.I noticed that the total time for removing the indexes (non-clustered) andthen recreating them after the BULK INSERT was significantly less than justdoing the BULK INSERT with the indexes left there, even though I specifiedTABLOCK.I would have expected SQL Server not to update the index until the insertcompleted (given the table lock) and so removing the indexes would have noeffect. Can anyone explain why removing the indexes should speed it up?This is on SQL Server 7.CheersDave
View 2 Replies
View Related
