Stored Proc Error And Exit

Sep 15, 2000

I come from an Access/VB background where in an error trapping routine or testing for an error your statement "exit sub" ended the process. WHen using a stored procedure and you come across an error what is the best method to exit/end the stored proc?

View 3 Replies


ADVERTISEMENT

Stored Proc Error: Error Converting Character String To Smalldatetime Data Type

Feb 12, 2005

I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.

Error from SQL Debug:
---
Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type.
---

Error from page execution:
---
Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.

Source Error:

Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
Line 78:
Line 79: cmd.ExecuteNonQuery()
---


Below is what I currently have for my stored procedure and the pertinent code from the page itself.

Stored Procedure:
---
CREATE PROCEDURE dbo.AdminAddUser( @username varchar(100),
@password varchar(100),
@email varchar(100),
@acct_type varchar(100),
@realname varchar(100),
@billname varchar(100),
@addr1 varchar(100),
@addr2 varchar(100),
@city varchar(100),
@state varchar(100),
@country varchar(100),
@zip varchar(100),
@memo varchar(100) )
AS
BEGIN TRAN

--
-- Returns 1 if successful
-- 2 if username already exists
-- 0 if there was an error adding the user
--

SET NOCOUNT ON
DECLARE @error int, @rowcount int

--
-- Make sure that there isn't already a user with this username
--

SELECT userID
FROM users
WHERE username=@username

SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT

IF @error <> 0 OR @rowcount > 0 BEGIN
ROLLBACK TRAN
RETURN 2
END

--
-- Set expiration date
--

DECLARE @expDate AS smalldatetime

IF @acct_type = "new_1yr" BEGIN
SET @expDate = DATEADD( yyyy, 1, GETDATE() )
END

IF @acct_type = "new_life" BEGIN
SET @expDate = DATEADD( yyyy, 40, GETDATE() )
END

DECLARE @paidCopies AS decimal
SET @paidCopies = 5


--
-- Add this user to the database
--

IF @acct_type <> "new" BEGIN

INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userPaidCopies, userExpirationDate, userLastPaidDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@paidCopies, @expDate, GETDATE(), @addr1, @addr2, @city, @state, @country, @zip, @memo )

SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT

IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END

END

IF @acct_type = "new" BEGIN

INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@addr1, @addr2, @city, @state, @country, @zip, @memo )

SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT

IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END

END



COMMIT TRAN
RETURN 1
GO
---


Page Code:
---
Sub AddUser(Sender as Object, e as EventArgs)

Dim db_conn_str As String
Dim db_conn As OleDbConnection
Dim resultAs Int32
Dim cmdAs OleDbCommand


db_conn_str = "Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=xxxxx; User ID=xxxxx; PWD=xxxxx;"
db_conn = New OleDbConnection( db_conn_str )
db_conn.Open()

cmd = new OleDbCommand( "AdminAddUser", db_conn )
cmd.CommandType = CommandType.StoredProcedure

cmd.Parameters.Add( "result", OleDbType.Integer ).Direction = ParameterDirection.ReturnValue

cmd.Parameters.Add( "@username", OleDbType.VarChar, 100 ).Value = Request.Form("userName")
cmd.Parameters.Add( "@password", OleDbType.VarChar, 100 ).Value = Request.Form("userPass")
cmd.Parameters.Add( "@email", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@acct_type", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@realname", OleDbType.VarChar, 100 ).Value = Request.Form("userRealName")
cmd.Parameters.Add( "@billname", OleDbType.VarChar, 100 ).Value = Request.Form("userBname")
cmd.Parameters.Add( "@addr1", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr1")
cmd.Parameters.Add( "@addr2", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr2")
cmd.Parameters.Add( "@city", OleDbType.VarChar, 100 ).Value = Request.Form("userCity")
cmd.Parameters.Add( "@state", OleDbType.VarChar, 100 ).Value = Request.Form("userState")
cmd.Parameters.Add( "@country", OleDbType.VarChar, 100 ).Value = Request.Form("userCountry")
cmd.Parameters.Add( "@memo", OleDbType.VarChar, 100 ).Value = Request.Form("userMemo")
cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")

cmd.ExecuteNonQuery()

(...)

---

View 1 Replies View Related

Can You Trace Into A Stored Proc? Also Does RAISERROR Terminate The Stored Proc Execution.

Feb 13, 2008

I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT  @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND  Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END 
 

View 3 Replies View Related

SQL Error When Using EXEC In Stored Proc

Jul 10, 2006

I have the following stored proc that is providing the following error - Server: Msg 156, Level 15, State 1, Line 79[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near the keyword 'ORDER'.
The sp works fine if the DateOfBirth elements are removed. I think it is something to do with the way in which the date variable is incorporated into the string that will be executed by the EXEC command but I'm unsure as to what is wrong.
CREATE PROCEDURE dbo.GetPersonsByName (@FirstName varchar(50)=NULL, @FamilyName varchar(50)=NULL, @DateOfBirth datetime=NULL)
AS
EXEC ('SELECT  PersonId, Title, FirstName, FamilyName , AltFamilyName, Sex, DateOfBirth, Age, DateOfDeath, CauseOfDeath, Height, Weight, ABO, RhD, Comments, LocalIdNo, NHSNo, CHINo, Hospital, HospitalNo, AltHospital, AltHospitalNo, EthnicGroup, Citizenship, NHSEntitlement, HomePhoneNo, WorkPhoneNo, MobilePhoneNo, CreatedBy, DateCreated, UpdatedBy, DateLastUpdated
 FROM vw_GetPersons  WHERE FirstName LIKE ''%' + @FirstName + '%'' AND  FamilyName LIKE ''%' + @FamilyName + '%'' AND DateOfBirth = '+ @DateOfBirth +' ORDER BY FamilyName, FirstName')
GO

View 12 Replies View Related

Stored Proc Syntax Error?

Mar 14, 2006

Can anyone see an error here? I am getting a general exception when call this and it is driving me crazy. What am I missing? The error is.....{"Incorrect syntax near 'UpdateStaffDept'." ... Any help is greatly appreciated! Below is the code calling the proc
Thank you!
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[UpdateStaffDept]
@Co_Id INT,
@CardNo VARCHAR(50),
@DeptNo VARCHAR(50)

AS
SET NOCOUNT ON

DECLARE
@Error INT

SELECT @Error = @@Error
IF @Error = 0
BEGIN

BEGIN TRANSACTION
UPDATE Staff
SET Dept_No = @DeptNo
WHERE Co_Id = @Co_Id
AND PC_Id IN (SELECT PC_ID FROM PC_Number WHERE PC_Number = @CardNo)

SELECT @Error = @@Error
IF @Error <> 0
BEGIN
ROLLBACK TRANSACTION
RETURN @Error
END
ELSE
COMMIT TRANSACTION

END
 
Dim seldeptno As String
seldeptno = ddlEditPosDept.SelectedValue
Dim cmdChnDept As SqlCommand
cmdChnDept = New SqlCommand("UpdateStaffDept", conEditPos)
cmdChnDept.Parameters.Add(New SqlParameter("@Co_Id", SqlDbType.Int 10))
cmdChnDept.Parameters("@Co_Id").Value = compid
cmdChnDept.Parameters.Add(New SqlParameter("@CardNo", SqlDbType.VarChar, 50))
cmdChnDept.Parameters("@CardNo").Value = lblEditPosCardNo.Text
cmdChnDept.Parameters.Add(New SqlParameter("@DeptNo", SqlDbType.VarChar, 50))
cmdChnDept.Parameters("@DeptNo").Value = seldeptno
cmdChnDept.ExecuteNonQuery()

View 3 Replies View Related

Error Handling In Stored Proc

Jan 16, 2003

I have a stored proc that loops through records using a cursor. If during the loop an error occurs i need to trap the error and write it to a log file.
Error handling needs to be placed in the update and insert sections and the error that occurs needs to get recorded along current row from the cursor.

Here is the code:
declare
@tier_id int,
@tier_desctext varchar(50),
@tier_shortdesc varchar(50),
@long_name varchar(50),
@short_name varchar(50),
@rec_count int

--Cursor for UES data
DECLARE cr_ues_tier INSENSITIVE CURSOR
FOR SELECT DISTINCT tier_id, tier_desctext, tier_shortdesc
FROM "dbsourcedayoldprod".ues.dbo.Tiers

OPEN cr_ues_tier

--Select cursor values into local variables
FETCH NEXT FROM cr_ues_tier INTO @tier_id, @tier_desctext, @tier_shortdesc
WHILE (@@FETCH_STATUS <> -1)
BEGIN

--Set Data Mart variables
SELECT @long_name = long_name, @short_name = short_name
FROM uesrpt..coverage_level
WHERE ues_tier_id = @tier_id

--Set the record counter
SET @rec_count = (select ues_tier_id from uesrpt..coverage_level where ues_tier_id = @tier_id)

--Are there exsisting records if so go to the update section
IF @rec_count <> 0

--Update Data Mart values if they have changed
BEGIN
IF @long_name <> @tier_desctext
OR (@long_name IS NULL AND @tier_desctext IS NOT NULL)
OR (@long_name IS NOT NULL AND @tier_desctext IS NULL)

OR @short_name <> @tier_shortdesc
OR (@short_name IS NULL AND @tier_shortdesc IS NOT NULL)
OR (@short_name IS NOT NULL AND @tier_shortdesc IS NULL)

UPDATE uesrpt..coverage_level
SET long_name = @tier_desctext,
short_name = @tier_shortdesc
WHERE ues_tier_id = @tier_id
END

--Rows don't exsist in the Data Mart - Insert new rows
ELSE
INSERT INTO uesrpt..coverage_level (ues_tier_id, long_name, short_name)
SELECT @tier_id, @tier_desctext, @tier_shortdesc

--Get next row from UES cursor
FETCH NEXT FROM cr_ues_tier INTO @tier_id, @tier_desctext, @tier_shortdesc
END

CLOSE cr_ues_tier
DEALLOCATE cr_ues_tier
GO

Any help is appreciated.
Thanks.

View 1 Replies View Related

Constraint Error In Stored Proc

Dec 18, 2007

This query keeps giving me a Primary Key violation error and I am not sure what it is getting at. maybe you can help?

truncate table tbl_rtv_cosmetic_dif
go
insert tbl_RTV_COSMETIC_DIF
select d.fisc_yr
,d.fisc_pd
,d.fisc_wk
,d.fisc_dy
,substring(a.long_sku,1,4) as DeptNo
,substring(a.long_sku,7,3) as VendorNo
,substring(a.long_sku,10,5) as MarkStyleNo
,a.Loc as LocNo
,convert(int,a.RsnCd) as ReasonCode
,min(a.EAN_Nbr) as UPCEANNo
,coalesce(i.own_rtl,0) as OwnedCur
,sum(convert(int,a.units)) as UPCUnits


from november a
inner join generalinfo..tbl_fisc_date d
on a.date = d.cal_date

left outer join itemdata..tbl_item_import_history i
on substring(a.long_sku,1,4) = i.dept
and substring(a.long_sku,7,3) = i.vendor
and substring(a.long_sku,10,5) = i.mrk_style
and d.fisc_yr = i.amc_yr
and d.fisc_pd = i.amc_pd
and d.fisc_wk = i.amc_wk

group by fisc_yr,fisc_pd,fisc_wk,fisc_dy
,substring(long_sku,1,4),substring(long_sku,7,3),substring(long_sku,10,5)
,loc,rsncd,own_rtl

View 3 Replies View Related

Can A Stored Proc Swallow An Error

Jul 23, 2005

I have a table I insert a record into to give access to a user. It usesprimary keys so duplicates are not allowed, so trying to add a recordfor a user more than once is not allowed.In my .NET programs, sometimes it's easier to let the user select agroup of people to give access to eben if some of them may already haveit.Of course this throws an exception an an error message. Now I couldcatch and ignore the message in .NET for this operation but then I'mstuck if something is genuinely wrong.So is there a way to do this? :In my stored procedure determine if an error occured because of aduplicate key and somehow not cause an exception to be returned toADO.NET in that case?

View 5 Replies View Related

Stored Proc Error Handling

Jul 20, 2005

Hi all,I have a sproc that uses OpenRowset to an Oracle db. If OpenRowseterrors, it terminates the procedure. I need it to continueprocessing. Is there any workaround for this?ThanksPachydermitis

View 1 Replies View Related

Exit Stored Procedure

Jul 12, 2006

Hello I have three stored procedures Sp1 calls Sp2 and Sp2 calls Sp3 as follows:
 
Exec Sp1
   Inserts, updates
   Exec Sp2
       Inserts, upadtes
       Exec Sp3
           If error Exit Exec Sp1
 
Can I end Sp1 if I catch an error in Sp3

View 1 Replies View Related

Exit Stored Procedures

Jul 12, 2006

Hello I have three stored procedures Sp1 calls Sp2 and Sp2 calls Sp3 as follows:

Exec Sp1
Inserts, updates
Exec Sp2
Inserts, upadtes
Exec Sp3
If error Exit Exec Sp1

Can I end Sp1 if I catch an error in Sp3

View 7 Replies View Related

Error Deploying Managed Stored Proc

Jul 24, 2006

When I try to deploy this managed stored proc assembly on SQL Server 2005 I get this error:
Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x8007000e. You may fix the problem and try again later
I looked on the net but found no documentation about it.  I know the CLR v2.0 is working as I have some ASP.NET apps running from this server that use it.  Any ideas?
 

View 1 Replies View Related

Stored Proc Error By Northwind Database

Jan 14, 2008

i try create this example:http://www.codeproject.com/KB/webforms/ReportViewer.aspxI have Northwind database added in the SQL server management and i select Northwind databse in drop box and I push Execute!ALTER PROCEDURE  ShowProductByCategory(@CategoryName nvarchar(15)
)ASSELECT  Categories.CategoryName, Products.ProductName,        
Products.UnitPrice, Products.UnitsInStockFROM    Categories INNER JOIN
Products ON         Categories.CategoryID = Products.CategoryIDWHERE  
CategoryName=@CategoryNameRETURNbut error is:Msg 208, Level 16, State 6, Procedure
ShowProductByCategory, Line 11Invalid object name
'ShowProductByCategory'.on web not so clear what is issue pls. help 

View 2 Replies View Related

Error: Identifier 'stored Proc Name' Is Out Of Scope

Mar 10, 2005

Does anyone know what this error message is telling me.

Thanks in advance everyone.

RB

View 2 Replies View Related

Stored Proc And Deadlock Error Handling

Jun 4, 2004

I have a Stored Proc that is called by a SQL Job in SQL Server 2000. This stored proc deadlocks once every couple of days. I'm looking into using the @@error and try to doing a waitfor .5 sec and try the transaction again. While looking around google I've come across a few articles stating that a deadlock inside a Stored Proc will stop all execution of the stored proc so I will not be able doing any error handling. Is this true? Does anyone have any experience that could help me out?

I know the best solution would be to resolve why I get a deadlock. We are currently looking into that but until we can resolve those issues I would like to get some type of error handling in place if possible.

Thank you,
DMW

View 8 Replies View Related

Raising Error From Trigger To Stored Proc

Jul 23, 2005

I feel like I'm missing something obvious here, but I'm stumped...I have a stored procedure with code that looks like:INSERT INTO MyTableA ( ...fields... ) VALUES (...values...)IF (@@ERROR <> 0)BEGINROLLBACK TRANSACTION;RAISERROR('An error occurred in the stored proc.', 16, 1);RETURN(1);END--FORCING AN ERROR AT THE END FOR TESTING PURPOSESRAISERROR('Proc Successful',16,1)On MyTableA, there is a trigger that loops through the inserted data andstops the insert in certain circumstances, returning an error:IF (some criteria)BEGINROLLBACKRAISERROR('An error occurred in the trigger.',16,1)RETURNENDWhen I call the stored procedure from VB (connecting via RDO) witherror-causing data, the trigger successfully stops the insert, and adds thetrigger-error-msg to the errors collection, but it does NOT seem to createan error situation back in the stored procedure. The procedure finishes upwith the "Proc Successful" message, so that when I iterate through theerrors collection back in VB, I have "Proc Successful" followed by "An erroroccurred in the trigger."Is there some way I'm not finding to have the calling procedure recognizethat a raiserror occurred in the trigger and behave appropriately for anerror situation?Jen

View 1 Replies View Related

Help: Prob Handling SQL Error In Stored Proc

Jul 20, 2005

Hi,I a stored procedure that inserts a record into a table asbelow.The insert works OK, but if the insert violates a uniqueindewx constraint on one of the columns, the proc terminatesimmediately, and does NOT execute the 'if @@ERROR <> 0'statement.Am I doing something wrong, or do I need to set an attributesomewhere?tia,Billbegin traninsert into Users(UserName, UserPWD, Lname, Fname, UserDesc)values (@userName, @userPWD, @lname, @fname, @userDesc)if @@ERROR <> 0beginrollback transet @returnCode = -2set @errMsg = 'SQL error '+ convert(varchar(6), @@ERROR)+ ' occurred adding user '+ @userNameend

View 1 Replies View Related

Error Adding Stored Proc To Subscription

Dec 14, 2007

I am trying to add a data driven subscription to my report. When I get to the screen to enter the Delivery Query, I enter the stored procedure (GetStatusReportData) in the query box. When i try to validate, I get a "Query is not valid" error. If I replace the stored procedure name with a generic query (select * from jobs), it works fine.

Is there some sort of syntax I need to use to enter a stored procedure here? I have used "exec GetStatusReportData" and that did not work either.

Thanks,
Stuart Fox

View 1 Replies View Related

Getting An Error While Activating Stored Proc On Queue

Apr 20, 2007

Hi,

I am having an SQL CLR stored proc which looks like this in SQL Svr



CREATE PROCEDURE [dbo].[callspGetMessage]

@strMsg [nvarchar](4000) OUTPUT

WITH EXECUTE AS CALLER

AS

EXTERNAL NAME [GetSSBMSG].[StoredProcs].[callspGetMessage]

GO

EXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'

GO

EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'StoredProcs.cs' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'

GO

EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=14 ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'







When I am trying to alter the queue to attach to this procedure using following code



alter queue q1 with activation (

status = on,

max_queue_readers = 1,

procedure_name = [callspGetMessage],

execute as owner);



I am getting following error.

The signature of activation stored procedure 'callspGetMessage' is invalid. Parameters are not allowed.



Parameters to the stored proc are not allowed or am I doing anything wrong.



Any help is greatly appreciated.



Thanks,

Don

View 2 Replies View Related

SQL Server Error 7405 While Compiling A Stored Proc

Jul 18, 2000

I am attempting to compile a stored proc that contains SQL statements that access databases across different SQL servers. I am getting the following error:

"Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query."

Does this mean that I need to put the necessary statements (Set ANSI_NULLS ON etc.) in my stored proc or that I need to configure my SQL Server differently somehow? I tried the former without success.

Thanks.

View 2 Replies View Related

Stored Proc Crashes At Select Into With Error 18456 When Run From Another Machine

Mar 27, 2007

Hi,

Finally found what is causing my .net c# service application to return with Error 18456 (NT Authority/anonymous logon" severity 14 State 11.

It is connecting to a sql server db in another machine and running a stored procedure in that db. I found out that if I remove that two statements that create temp tables (with select INTO), the stored procedure executes without a problem.

Note that this stored procedure updates the tables does not have problems updated tables that are in the DB. I gets upset when creating temp tables though.



I cannot do away with those temp tables as they are needed in the calculation. How can I fix this problem?

Why would creating temp tables remotely cause this error? What am I missing in my set up. My service application connects with the integrated security = true. My service process installer has the account set to "User". What am I missing.

Please please help.



Ahrvie

View 1 Replies View Related

Trigger Error When Inserting Stored Proc Output Into Temp Table.

Feb 18, 2008





I writing a unit test which has one stored proc calling data from another stored proc. Each time I run dbo.ut_wbTestxxxxReturns_EntityTest I get a severe uncatchable error...most common cause is a trigger error. I have checked and rechecked the columns in both of the temp tables created. Any ideas as to why the error is occurring?

--Table being called.


ALTER PROCEDURE dbo.wbGetxxxxxUserReturns

@nxxxxtyId smallint,

@sxxxxxxxxUser varchar(32),

@sxxxxName varchar(32)

AS

SET NOCOUNT ON




CREATE TABLE #Scorecard_Returns

(
NAME_COL varchar(64),
ACCT_ID int,

ACCT_NUMBER varchar(10),

ENTITY_ID smallint,

NAME varchar(100),

ID int,

NUM_ACCOUNT int,

A_OFFICER varchar(30),

I_OFFICER varchar(30),

B_CODE varchar(30),

I_OBJ varchar(03),

LAST_MONTH real,

LAST_3MONTHS real,

IS int

)




ALTER PROCEDURE dbo.ut_wbTestxxxxReturns_EntityTest



AS

SET NOCOUNT ON




CREATE TABLE #Scorecard_Returns

(
NAME_COL varchar(64),
ACCT_ID int,

ACCT_NUMBER varchar(10),

ENTITY_ID smallint,

NAME varchar(100),

ID int,

NUM_ACCOUNT int,

A_OFFICER varchar(30),

I_OFFICER varchar(30),

B_CODE varchar(30),

I_OBJ varchar(03),

LAST_MONTH real,

LAST_3MONTHS real,

IS int

)

INSERT #Scorecard_Returns(

NAME_COL ,

ACCT_ID

ACCT_NUMBER ,

ENTITY_ID,

NAME,

ID,

NUM_ACCOUNT,

A_OFFICER,

I_OFFICER,

B_CODE,

I_OBJ ,

LAST_MONTH

LAST_3MONTHS,

IS

)

EXEC ISI_WEB_DATA.dbo.wbGetxxxxxcardUserReturns

@nId = 1,

@sSUser = 'SELECTED USER',

@sUName = 'VALID USER'

View 4 Replies View Related

Stored Proc - Calling A Remote Stored Proc

Aug 24, 2006

I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563

This works fine on my local server:

Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName

This does not work (Attempting to execute a remote stored proc named 'Data_Add':

Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'

When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.

Could anyone shed some light on what I need to do to get this to work?

Thanks - Amos.

View 3 Replies View Related

Stored Proc Question : Why If Exisits...Drop...Create Proc?

Jun 15, 2006

Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK

View 3 Replies View Related

Exit Activex Script Without Giving An Error?

Feb 25, 2005

I am using ActiveX Script tasks to branch out on the different tasks that I have within the DTS. When I want a particular branch of tasks not to be executed, I give a "Main = DTSStepScriptResult_DontExecuteTask"

This seems to be working fine in terms of functionality, but there is an error that is displayed saying "Task reported failure on execution".

How do I get rid of this? I need to exit the task, and still just get one message box at the end of it all that happily reads "Succesfully completed tasks"

View 2 Replies View Related

ASP Cannot Run Stored Proc Until The Web User Has Run The Proc In Query Analyzer

Feb 23, 2007

I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.

View 1 Replies View Related

Calling A Stored Proc From Within Another Stored Proc

Feb 20, 2003

I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.

I guess I should state my question to the forum !

Is there a way to call a stored proc from within another stored proc?

Thanks In Advance.

Tony

View 1 Replies View Related

Stored Proc Calls Another Stored Proc

Jan 13, 2006

Hi all,

I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?

Thanks for your help!
Cat

View 5 Replies View Related

Calling Stored Proc B From Stored Proc A

Jan 20, 2004

Hi all

I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement

Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc

The SELECT statement in question retrieves a single row from a table containing 10 columns.

Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?

I know about stored proc return values and about output parameters, but I think I am looking for something different.

Thanks

View 14 Replies View Related

Calling T SQL Stored Proc From CLR Stored Proc

Aug 30, 2007

I would like to know if the following is possible/permissible:

myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with

INSERT INTO #tmpCLR EXECUTE spSQL
}

spSQL
(

INSERT INTO #tmpABC EXECUTE spSQL2
)


spSQL2
(
// some other t-sql stored proc
)


Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.

View 2 Replies View Related

[Execute Process Task] Error:The Process Exit Code Was -1 While The Expected Was 0.

Mar 11, 2008

Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server

What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%



However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".

There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log

Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0

thanks in advance
Dave

View 1 Replies View Related

Execute Process Task Error - The Process Exit Code Was 1 While The Expected Was 0.

Jan 30, 2007

How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:

SSIS package "IngramWeeklyPOS.dtsx" starting.

Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".

Task failed: Unzip download file

SSIS package "IngramWeeklyPOS.dtsx" finished: Success.

Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:

SSIS package "IngramWeeklyPOS.dtsx" starting.

Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".

Task failed: Unzip download file

SSIS package "IngramWeeklyPOS.dtsx" finished: Success.

The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.

Thanks,

Monisha

View 1 Replies View Related

Execute Process Task - Error :The Process Exit Code Was 2 While The Expected Was 0.

Mar 20, 2008



I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.

For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.

I am using the Execute Process Task and the process parameters I am providing are:



WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat

The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"

the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.

The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :

[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]

Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.

Can anyone help ?




View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved