Stored Procedure Error Message...
Mar 6, 2007
Hi
I have trouble to get this stored procedure running and I tried to figure out where I did a mistake but I'm just lost, so if somebody could help me... Thanks!
The Error Message is 102, Level 15, State 1
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE InsertNewDocumentTypeAndAddSystemFields
@varDocumentTypeName nvarchar(254),
@varNEWDocumentTypeID integer = 0,
@varTempID integer
AS
BEGIN
SET NOCOUNT ON;
INSERT INTO dbo.Document_Type_LookUP
VALUES(@varDocumentTypeName);
@varNEWDocumentTypeID = IDENT_CURRENT('dbo.Document_Type_LookUP')
-- Name or Title
INSERT INTO dbo.Document_Field
SELECT 'Name', SQLDataTypeID FROM SQLDataType WHERE SQLDataTypeName = 'string'
@varTempID = IDENT_CURRENT('dbo.Document_Field')
INSERT INTO dbo.Document_Type_Field_Link
VALUES(@varNEWDocumentTypeID,@varTempID)
-- Filename
INSERT INTO dbo.Document_Field
SELECT 'Filename', SQLDataTypeID FROM SQLDataType WHERE SQLDataTypeName = 'string'
@varTempID = IDENT_CURRENT('dbo.Document_Field')
INSERT INTO dbo.Document_Type_Field_Link
VALUES(@varNEWDocumentTypeID,@varTempID)
END
GO
Thanks in advance!
View 1 Replies
ADVERTISEMENT
Mar 24, 2008
I have read many error message articles on the web but still cannot get this to work. I need to return the description of the error that is produced to a output variable (@ErrMsg).
In my stored procedure, I assign @SQLCode to @@Error. @SQLCode is also an output variable. I got the @SQLCode to return no problem, just the description is wrong.
Code SnippetIF @SQLCode <> 0
BEGIN
SELECT description = @ErrMsg
FROM master.dbo.sysmessages
WHERE error = @SQLCode
END
Can anyone shed some light on this? I have heard I have to assign the error information to another table and then pull the info from that table, but I don't know how to do that either. Help is greatly appreciated.
Thanks
View 6 Replies
View Related
May 30, 2007
Greetings,
I am creating a package that has many SQL tasks. Each task executes a stored procedure. I need to capture any error messages returned by the stored procedures. Eventually, the error messages will be logged so that we can audit the package and know if individual tasks succeeded or failed.
I'm not sure where or how I can access a stored procedure message. What is the best way?
Thanks,
BCB
View 7 Replies
View Related
Jan 10, 2008
I'm creating a simple stored procedure:
create procedure spzipcode
(
@TableName nvarchar(10)
)
as
select distinct customer_code
from @TableName
GO
When running the code above, I get the following error message:
Server: Msg 137, Level 15, State 2, Procedure spzipcode, Line 8
Must declare the variable '@TableName'.
I can't figure out what I'm doing wrong.
Does anyone have an answer:
View 6 Replies
View Related
Jan 19, 2007
Hi All,I am having an error message when running the program below, the message says " Could not find stored procedure 'dbo.U_Login ". I have tried a inline Sql statement to match if user exists and then redirects to another page but when using a Stored Procedure what I get is the above mentioned error. I am logged onto my PC as Administrator but I don't know why this error appaears. Can anyone help me with this ? I am using SQL Server Express with Visual Studio. here the application I am trying to run:1 using System;
2 using System.Data.SqlClient;
3 using System.Data;
4 using System.Configuration;
5 using System.Web;
6 using System.Web.Security;
7 using System.Web.UI;
8 using System.Web.UI.WebControls;
9 using System.Web.UI.WebControls.WebParts;
10 using System.Web.UI.HtmlControls;
11
12
13 public partial class _Default : System.Web.UI.Page
14 {
15 protected void Page_Load(object sender, EventArgs e)
16 {
17
18 }
19 protected void btnSubmit_Click(object sender, EventArgs e)
20 {
21
22 //SqlDataSource LoginDataSource = new SqlDataSource();
23 //LoginDataSource.ConnectionString =
24 // ConfigurationManager.ConnectionStrings["LoginConnectionString"].ConnectionString;
25 ////ConfigurationManager.ConnectionStrings["LoginConnectionString"].ToString();
26 ////// if (LoginDataSource != null)
27 //// // Response.Redirect("DebugPage.aspx");
28
29 //Sql connection = LoginDataSource.ConnectionString;
30
31 string UserName = txtUserName.Text;
32 string Password = txtPassword.Text;
33
34 // string query = "SELECT * FROM Users WHERE userName = @UserName " + "AND Password = @Password";
35 //SqlCommand Command = new SqlCommand(query, new SqlConnection(GetConnectionString()));
36
37 SqlCommand Command = new SqlCommand("dbo.U_Login", new SqlConnection(GetConnectionString()));
38
39
40 //SqlConnection SqlConnection1 = new SqlConnection(GetConnectionString()); //added
41 //SqlCommand Command = new SqlCommand(); //added
42 //Command.Connection = SqlConnection1; //added
43 // Command.Connection = new SqlConnection(GetConnectionString());
44 //SqlConnection_1.Open();//added
45
46 Command.CommandType = CommandType.StoredProcedure; //added
47 //Command.CommandText = "dbo.U_Login"; //added
48
49
50
51
52 Command.Parameters.AddWithValue("@UserName", UserName);
53
54 Command.Parameters.AddWithValue("@Password", Password);
55
56 Command.Connection.Open();
57
58 SqlDataReader reader;
59
60
61 //reader = Command.ExecuteReader(CommandBehavior.CloseConnection);11
62
63 reader = Command.ExecuteReader();
64
65
66 if (reader.Read())
67
68 Response.Redirect("DebugPage.aspx");
69 else
70 Response.Write("user doesn't exist");
71
72
73 //SqlConnection_1.Close();//added
74
75
76 }
77 private static string GetConnectionString()
78 {
79
80 return ConfigurationManager.ConnectionStrings["LoginConnectionString"].ConnectionString;
81
82 }
83
84
85 }
86
87
88
89
Thanks in advance
View 1 Replies
View Related
Sep 17, 2007
Client/Server machine: Windows Xp Pro (SP2) (latest patches)
Office Software: Access 2003 (latest patches)
Database S/W: SQL Server 2005 (latest patches)
The following error message is displayed when trying to modify a stored procedure.
This version of Microsoft Access doesn't support design changes to the
version of Microsoft SQL Server your project is connected to. See the
Microsoft Office Update Web site for the latest information and downloads
(on the Help menu, click Office on the Web). Your design changes will not be
saved.
However, if you save, close and re-open the stored procedure having made the required changes, the changes have been saved.
Is there any way to suppress the error message / hotfix available from microsoft since the error message appears to be completely erroneous ?
Have I provided enough detail as this is my first post ?
Philip
View 1 Replies
View Related
May 7, 2008
I have a stored procedure which checks to see if a user's email address exists before it inserts a new record. If it does it should return a message that notifies the user they are already subscribed. If they are not a different message should be returned stating that a new subscription has been created. This procedure works and is shown below.
The problem I am having is with the first SELECT statement. How can I get the procedure to show just one message and not the results from the first SELECT statement too?
CREATE PROCEDURE sp_InsertSubscription
@SubscriberFirstName VARCHAR(50),
@SubscriberLastName VARCHAR(50),
@SubscriberEmailAddress VARCHAR(50),
@SubscriberZipCode INT,
@IsActive BIT,
@SubscriberOptIn BIT,
@AdditionalOffersOptIn BIT,
@Msg VARCHAR(50) OUTPUT
AS
BEGIN
SET NOCOUNT ON;
-- Check to see if email address exists first
SELECT @@ROWCOUNT FROM Subscriber WHERE SubscriberEmailAddress = @SubscriberEmailAddress
IF @@ROWCOUNT > 0
BEGIN
SET @Msg = 'This email address is already subscribed'
SELECT @Msg AS 'User'
RETURN
END
-- Insert statements for procedure here
INSERT INTO Subscriber (SubscriberFirstName,
SubscriberLastName,
SubscriberEmailAddress,
SubscriberZipCode,
IsActive,
SubscriberOptIn,
AdditionalOffersOptIn,
SubscriberSignUpDate)
VALUES (@SubscriberFirstName,
@SubscriberLastName,
@SubscriberEmailAddress,
@SubscriberZipCode,
@IsActive,
@SubscriberOptIn,
@AdditionalOffersOptIn,
GETDATE())
IF @@ROWCOUNT > 0
BEGIN
SET @Msg = 'New user subscription created'
END
SELECT @Msg AS 'User'
END
GO
If the user's email address does not exist I get
(No column name)
User
New user subscription created
If the user's email address does exist I get
(No column name)
0
User
This email address is already subscribed
I would like for the (No column name) to go away - I know this is coming from the first SELECT statement. How do I suppress that statement from being output, yet still get the @@ROWCOUNT variable set?
View 3 Replies
View Related
Aug 11, 2006
Hello everybody,
I've encountered a strange thing using a CLR Stored procedure:
The procedure throws an exception with no message inside... value = {" "}
Basically the procedure has a string as argument which contains a SQL statement that changes according to the users selections...
The results of the query are saved into a dataset for further processing.
Those resultsets can sometimes be very big (ex: 15000 records...). (For the record the procedure works fine for smaller datasets ex 6000 records and running the same query on the application server returns the expected resultset )
By Debugging the procedure I could determine that the failing point was when the dataset is filled...
Anyone having any idea??
The only information I have from this exception is the stacktrace:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.CloseInternal(Boolean closeReader)
at System.Data.SqlClient.SqlDataReader.Close()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteScalar()
at DataAccess.runScalar(String strSQL, Boolean isStoredProcedure) in c:InetpubwwwrootStatistixApp_CodeDataAccess.cs:line 114
Thanks in advance
Alaindlk
View 5 Replies
View Related
Nov 28, 2007
Does anyone have any ideas or sample code for firing a stored procedure using an MSMQ message?
I have to assume XML is in there somewhere.
(ie. create XML formatted message with proc call as element?)
Just getting started on project, any help appreciated.
www.beyonder422.com
View 4 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Aug 16, 2007
Hello,
is message exchange between a .NET Webservice and a SQL stored procedure possible?
And if, could you please explain me how? Or give me a tip where i can get more informations
and maybe samples?
thanks for your help
regards
pamelia
View 30 Replies
View Related
Jul 28, 2006
create procedure Pr_addsupportor(
@supportornumber varchar(10),
@company varchar(100),
@title char(10),
@firstname char(30),
@surname char(30),
@addressline1 varchar(1000),
@addressline2 varchar(1000),
@addressline3 varchar(1000),
@postcode varchar(20),
@town char(100),
@county char(100),
@country varchar(100),
@phonenumber varchar(15),
@faxnumber varchar(15),
@email varchar(100),
@paymenttitle varchar(100),
@barcode varchar(2000),
@collector varchar(3),
@status varchar(10),
@registerdate datetime)
INSERT into
supportor(
[supportor number],
company,
title,
[first name],
surname,
[address line1],
[address line2],
[addess line3],
[post code],
town,
county,
country,
[phone number],
[fax number],
[e-mail],
[payment title],
barcode,
collector,
status,
[register date])
values
(
@supportornumber,
@company,
@title,
@firstname,
@surname,
@addressline1,
@addressline2,
@addressline3,
@postcode,
@town,
@county,
@country,
@phonenumber,
@faxnumber,
@email,
@paymenttitle,
@barcode,
@collector,
@status,
@registerdate);
Server: Msg 156, Level 15, State 1, Procedure Pr_addsupportor, Line 22
Incorrect syntax near the keyword 'INSERT'.
plz help me to find the error
View 4 Replies
View Related
Sep 4, 2015
I had the SP, I want to call in Script Task , had the Result set data value then I need pop up message box. So how can I call stored procedure result in message box in ssis script task using C#.
and I want to use SSIS -OLEDB connection.
Â
ConnectionManager cm;
System.Data.SqlClient.SqlConnection sqlConn;
System.Data.SqlClient.SqlCommand sqlComm;
cm = Dts.Connections["OLE_TEST_"];
sqlConn = (System.Data.SqlClient.SqlConnection)cm.AcquireConnection(Dts.Transaction);
sqlComm = new System.Data.SqlClient.SqlCommand("Exec dbo.sOp_xx_XXXe_VXX 280", sqlConn);
sqlComm.ExecuteNonQuery();
above code , no message box.
View 2 Replies
View Related
Jan 19, 2007
Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
View 9 Replies
View Related
Nov 6, 2007
I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType int = 0,
@PositionType int = 0,
@BeginAvailableDate DATETIME = NULL,
@EndAvailableDate DATETIME = NULL,
@EmployerLatitude DECIMAL(10, 6),
@EmployerLongitude DECIMAL(10, 6),
@Radius INT
AS
SET NOCOUNT ON
DECLARE @v_SQL NVARCHAR(2000)
DECLARE @v_RadiusMath NVARCHAR(1000)
DECLARE @earthRadius DECIMAL(10, 6)
SET @earthRadius = 3963.191
-- SET @EmployerLatitude = 29.346675
-- SET @EmployerLongitude = -89.42251
-- SET @radius = 50
SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius
SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +
'Round(' + @v_RadiusMath + ', 0) AS Distance ' +
'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +
'WHERE ' + @v_RadiusMath + ' <= ' + @Radius
IF @LicenseType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType
END
IF @PositionType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType
END
IF LEN(@BeginAvailableDate) > 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate
END
--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'
PRINT(@v_SQL)
EXEC(@v_SQL)
-----------------------------------------------------------------------------------------------------------------
View 4 Replies
View Related
Jul 12, 2007
Hi All,
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Thanks in advance,
Anand
View 4 Replies
View Related
Oct 17, 2006
Hi, somebody can tell me how to create a correct Stored procedure (with commit and rollback) that return errors to my code for save it in a log file .... I would like to know the right method for a SP with parameters and return error value Thanks
View 5 Replies
View Related
Jul 29, 2007
hi,
i want to take the first n values from my Categorii table, here is my stored procedure:
SELECT ROW_NUMBER() OVER (ORDER BY CategoryID) AS RowNumber, CategoryID, Name, Description FROM Categorii
WHERE DepartamentID = @DepartamentID AND RowNumber <= 5
i get the error: invalid column name RowNumber
why? what should i do? if i execute the procedure without the AND RowNumber <= 5 i get the RowNumber values 1 to 9 (that means it works)...but what should i do to retrive only the first n?
thank you
View 2 Replies
View Related
Aug 17, 2007
I've a stored procedure which returns values based on 7 criterias. It was working fine and returned the values properly. I added one more criteria for returning values from 2 database columns based on minimum and maximum values. It's not working properly and gives syntax error. Could someone tell me what mistake I'm doing? Thanks. ALTER procedure [dbo].[USP_Account_Search_Mod]
@ClientCode VARCHAR(7) = ''
,@DebtorName VARCHAR(25) = '',@DebtorNumber INT = 0
,@AccountNumber VARCHAR(30) = ''
,@ReferenceNumber VARCHAR(30) = '',@Tier INT = 0
,@Status VARCHAR(5) = ''
,@UserID INT
,@Month DateTime = NULL
,@FromDate DateTime = NULL
,@ToDate DateTime = NULL,@OriginalMin decimal = 0
,@OriginalMax decimal = 0,@CurrentMin decimal = 0
,@CurrentMax decimal =0
,@lstAmountSelect VARCHAR(3),@IsActive bit = 1
ASDECLARE
@SQLTier1Select VARCHAR(2000)
,@SQLTier2Select VARCHAR(2000)
,@Criteria VARCHAR(2000)
,@SQL VARCHAR(8000)
,@CRI1 VARCHAR(100)
,@CRI2 VARCHAR(100)
,@CRI3 VARCHAR(100)
,@CRI4 VARCHAR(100)
,@CRI5 VARCHAR(100)
,@CRI6 VARCHAR(200)
,@CRI7 VARCHAR(500)
,@CRI8 VARCHAR(500)
,@CRI9 VARCHAR(500)
SELECT @CRI1 = ''
,@CRI2 = ''
,@CRI3 = ''
,@CRI4 = ''
,@CRI5 = ''
,@CRI6 = ''
,@CRI7 = ''
,@CRI8=''
,@CRI9=''
,@Criteria = ''
SELECT @DebtorName = REPLACE(@DebtorName,'''','''''');
Print @DebtorName
if(SELECT UserTypeID FROM dbo.tbl_Security_Users Where UserID = @UserID) = 3 AND @ClientCode = ''
return (-1)IF LEN(@DebtorName) > 0
SET @CRI1 = ' AND Name like ' + '''%' + @DebtorName + '%'''IF @DebtorNumber > 0
SET @CRI2 = ' AND Number = ' + CAST(@DebtorNumber AS VARCHAR(7))IF LEN(@AccountNumber) > 1
SET @CRI3 = ' AND AccountNumber like ' + '''%' + @AccountNumber + '%'''IF LEN(@ReferenceNumber) > 0
SET @CRI4 = ' AND Account like ' + '''%' + @ReferenceNumber + '%'''IF LEN(@ClientCode) > 1
SET @CRI5 = ' AND Customer = ' + '''' + @ClientCode + ''''
SET @Status = RTRIM(@Status)
IF ((@Status Not IN ('ALL','ALA','ALI')) AND (LEN(@Status)>1))
BEGIN
IF(@Status = 'PAID')
SET @CRI6 = ''
IF(@Status = 'CANC')
SET @CRI6 = ' AND Code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryCancelledT1 = 1 OR SearchCategoryCancelledT2 = 1)'
END
--PRINt @CRI6IF LEN(CONVERT(CHAR(8), @Month, 112)) > 0
BEGIN
IF(LEN(CONVERT(CHAR(8), @FromDate, 112)) > 0 AND LEN(CONVERT(CHAR(8), @ToDate, 112)) > 0 )
BEGIN
SET @CRI7 = ' AND Received BETWEEN ' + '''' + CONVERT(CHAR(8), @FromDate, 112)+ '''' + ' AND ' + '''' + CONVERT(CHAR(8), @ToDate, 112) +''''END
ELSEBEGIN SET @CRI7 = ' AND DATEPART(mm, Received) = DATEPART(mm, ' + '''' + CONVERT(CHAR(8), @Month, 112) + '''' + ') AND DATEPART(yy, Received) = DATEPART(yy, ' + '''' + CONVERT(CHAR(8), @Month, 112) + ''''
END END
IF @lstAmountSelect='ALL'
SET @CRI8=''
else IF @lstAmountSelect = 'DR'
BEGIN
SET @CRI8=' AND OriginalBalance >= '+ convert(Varchar,@OriginalMin) + 'AND OriginalBalance<=' + convert(Varchar,@OriginalMax)+' AND CurrentBalance >= '+ convert(Varchar,@CurrentMin) + 'AND CurrentBalance<=' +convert(Varchar,@CurrentMax)
END
ELSE IF @lstAmountSelect = 'OLC'
BEGIN
SET @CRI8=' AND OriginalBalance < CurrentBalance '
END
ELSE IF @lstAmountSelect = 'OGC'
BEGIN
SET @CRI8=' AND OriginalBalance > CurrentBalance '
END
ELSE IF @lstAmountSelect = 'OEC'
BEGIN
SET @CRI8=' AND OriginalBalance = CurrentBalance '
END
SELECT @Criteria = @CRI1 + @CRI2 + @CRI3 + @CRI4 + @CRI5 + @CRI6 + @CRI7 + @CRI8
--PRINT @Criteria
--PRINT @CRI7
if @Status = 'ALL' OR @Status = 'ALA' OR @Status = 'ALI' --All Period
BEGIN
if(@Status = 'ALL') --All Active
BEGIN
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria + ' AND code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryAllT1 = 1)'
SELECT @SQLTier2Select = 'SELECT * FROM dbo.UDV_Tier2Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria + ' AND code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryAllT2 = 1)'
END
if(@Status = 'ALA') --All Active
BEGIN
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria + ' AND code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryActiveT1 = 1)'
SELECT @SQLTier2Select = 'SELECT * FROM dbo.UDV_Tier2Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria + ' AND code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryActiveT2 = 1)'
END
if(@Status = 'ALI') --All Inactive
BEGIN
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria + ' AND code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryInactiveT1 = 1)'
SELECT @SQLTier2Select = 'SELECT TOP 1000 * FROM dbo.UDV_Tier2Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria + ' AND code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryInactiveT2 = 1)'
ENDEND
ELSE IF @Status = 'PAID'
BEGIN
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))' + @Criteria + ' AND (number IN (SELECT DISTINCT ph1.number FROM Collect2000.dbo.payhistory ph1 LEFT JOIN Collect2000.dbo.payhistory ph2 ON ph1.UID = ph2.ReverseOfUID WHERE (((ph1.batchtype = ''PU'') OR (ph1.batchtype = ''PC'')) AND ph2.ReverseOfUID IS NULL)) OR code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryPaidPaymentsT1 = 1))'
SELECT @SQLTier2Select = 'SELECT * FROM dbo.UDV_Tier2Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))' + @Criteria + ' AND (number IN (SELECT DISTINCT ph1.number FROM Collect2000Tier2.dbo.payhistory ph1 LEFT JOIN Collect2000Tier2.dbo.payhistory ph2 ON ph1.UID = ph2.ReverseOfUID WHERE (((ph1.batchtype = ''PU'') OR (ph1.batchtype = ''PC'')) AND ph2.ReverseOfUID IS NULL)) OR code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryPaidPaymentsT2 = 1))'END
ELSE
BEGINSELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria
SELECT @SQLTier2Select = 'SELECT * FROM dbo.UDV_Tier2Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))'+ @Criteria END
SELECT @SQL = CASE @Tier
WHEN 0 THEN @SQLTier1Select + ' UNION ' + @SQLTier2Select + 'ORDER BY NAME ASC' WHEN 1 THEN @SQLTier1Select + 'ORDER BY NAME ASC'
WHEN 2 THEN @SQLTier2Select + 'ORDER BY NAME ASC 'END
PRINT @SQL
--SELECT @SQL
EXEC (@SQL)
View 5 Replies
View Related
Sep 6, 2007
When I'm trying to execute my stored procedure I'm getting the following code Line 35: Incorrect syntax near '@SQL'.
Here is my procedure. Could someone tell me what mistake I'm doing.Alter procedure [dbo].[USP_SearchUsersCustomers_New]
@UserID INT
,@RepName VARCHAR(50)
,@dlStatus VARCHAR(5) = ''
as
Declare
@Criteria VARCHAR(500)
,@SQL VARCHAR(8000)
SELECT @Criteria = ''SET NOCOUNT ON
if (@dlStatus <>'ALL' AND (LEN(@dlStatus)>1))
BEGIN
if(@dlStatus='ALA')
SET @Criteria='AND dbo.tbl_Security_Users.IsActive=1'
else
SET @Criteria='AND dbo.tbl_Security_Users.IsActive=0'
END
--If the user is an Admin, select from all users.
if(dbo.UDF_GetUsersRole(@UserID) = 1)
BEGIN@SQL = 'SELECT U.UserID
--,U.RoleID
,ISNULL((Select TOP 1 R.RoleName From dbo.tbl_Security_UserRoles UR
INNER JOIN dbo.tbl_Security_Roles R ON R.RoleID = UR.RoleIDWhere UR.UserID = U.UserID), 'Unassigned') as 'RoleName'
,U.UserName
,U.Name
,U.Email
,U.IsActive
,U.Phone
FROM dbo.tbl_Security_Users U
--INNER JOIN dbo.tbl_Security_Roles R ON U.RoleID = R.RoleID
WHERE U.NAME LIKE @RepName AND U.UserTypeID < 3'+ @Criteria
END
View 6 Replies
View Related
Jan 29, 2008
Hi,I want to use a variable to put a value in a table but it doesn't seems to works. How can i do that? I have bolded and underlined the text that i think is not correct.What syntax can i use to make it work?Thanks----------------------------------------------------------------------dbo._UpdateImage(@ID int,@ImageID int)
ASBegin
Declare @PhotosThumb nvarchar(50)Declare @Photos nvarchar(50)
SET @PhotosThumb = 'PhotosThumb' + convert(nvarchar, @ImageID)SET @Photos = 'Photos' + convert(nvarchar, @ImageID)
SET NOCOUNT ON
IF @ImageID = 1
UPDATE PhotosSET @PhotosThumb = 'Logo_thumb.gif',@Photos = 'Logo320x240.gif'WHERE ID = @ID
ELSE
UPDATE PhotosSET @PhotosThumb = NULL,@Photos = NULLWHERE ID = @ID
SET NOCOUNT OFFEND
View 6 Replies
View Related
Feb 12, 2008
Yo people, got a little problem with this stored procedure, i go to save it and it kicks out these errors:
Incorrect syntax near the keyword 'Drop'.Incorrect syntax near 'Go'.Incorrect syntax near 'Go'.'CREATE/ALTER PROCEDURE' must be the first statement in the query batch
I dont no about this sort of stuff so a good break down of what wrong would be good, below is the whole procedure.
CREATE PROCEDURE dbo.SQLDataSource1
Drop Table PersonGo
Create Table Person
(PersonID Int Identity,
PersonEmail Varchar(255),PersonName Varchar(255),
PersonSex Char(1),PersonDOB DateTime,
PersonImage Image,PersonImageType Varchar(255)
)
Drop Proc sp_person_isp
Go
Create Proc sp_person_isp
@PersonEmail Varchar(255),@PersonName Varchar(255),
@PersonSex Char(1),@PersonDOB DateTime,
@PersonImage Image,
@PersonImageType Varchar(255)
As
BeginInsert into Person
(PersonEmail, PersonName, PersonSex,
PersonDOB, PersonImage, PersonImageType)
Values
(@PersonEmail, @PersonName, @PersonSex,
@PersonDOB, @PersonImage, @PersonImageType)
End
Go
View 4 Replies
View Related
Nov 4, 2003
I have the following code in my code behind page:
Dim CN = New SqlConnection(ConfigurationSettings.AppSettings("connectionstring"))
Dim CM As New SqlCommand("spCCF_CrossTab", CN)
CM.CommandType = CommandType.StoredProcedure
CM.Parameters.Add(New SqlParameter("@LocationID", "CCFIF"))
CM.Parameters.Add(New SqlParameter("@BeginDate", dtbStart.Text))
CM.Parameters.Add(New SqlParameter("@EndDate", dtbEnd.Text))
CN.Open()
DR = CM.ExecuteReader(CommandBehavior.CloseConnection)
dgReport.DataSource = DR
dgReport.DataBind()
A SQL exception is thrown: Incorrect syntax near the keyword 'END'
But I turned on tracing in Enterprise Manager, the following request is sent to SQL:
exec spCCF_CrossTab @LocationID = N'CCFIF', @BeginDate = N'11/3/2003', @EndDate = N'11/4/2003'
In query analyzer the above line executes without error and returns the expected information.
My stored procedure is:
CREATE PROCEDURE spCCF_CrossTab
@LocationID varchar(10),
@BeginDate varchar(10),
@EndDate varchar(10)
AS
declare @select varchar(8000), @sumfunc varchar(100), @pivot varchar(100), @table varchar(100), @where varchar(1000)
select @select='SELECT dbo.ActionCodes.Name AS Action FROM dbo.Productivity_CCF LEFT OUTER JOIN dbo.ActionCodes ON dbo.Productivity_CCF.ActionID = dbo.ActionCodes.ID LEFT OUTER JOIN dbo.UserInfo ON dbo.Productivity_CCF.UserID = dbo.UserInfo.ID WHERE (dbo.Productivity_CCF.[Date] BETWEEN CONVERT(DATETIME, ''' + @BeginDate + ''', 101) AND CONVERT(DATETIME, ''' + @EndDate + ''', 101)) GROUP BY dbo.UserInfo.UserName, dbo.ActionCodes.Name order by Action'
select @sumfunc= 'COUNT(ActionID)'
select @pivot='UserName'
select @table= 'UserInfo'
select @where='(dbo.UserInfo.LocationID = ''' + @LocationID + ''' and dbo.UserInfo.Inactive<>1 )'
DECLARE @sql varchar(8000), @delim varchar(1)
SET NOCOUNT ON
SET ANSI_WARNINGS OFF
EXEC ('SELECT ' + @pivot + ' AS pivot INTO ##pivot FROM ' + @table + ' WHERE 1=2')
EXEC ('INSERT INTO ##pivot SELECT DISTINCT ' + @pivot + ' FROM ' + @table + ' WHERE '
+ @pivot + ' Is Not Null and ' + @where)
SELECT @sql='', @sumfunc=stuff(@sumfunc, len(@sumfunc), 1, ' END)' )
SELECT @delim=(CASE Sign( CharIndex('char', data_type)+CharIndex('date', data_type) )
WHEN 0 THEN '' ELSE '''' END)
FROM tempdb.information_schema.columns
WHERE table_name='##pivot' AND column_name='pivot'
SELECT @sql=@sql + '''' + convert(varchar(100), pivot) + ''' = ' +
stuff(@sumfunc,charindex( '(', @sumfunc )+1, 0, ' CASE ' + @pivot + ' WHEN '
+ @delim + convert(varchar(100), pivot) + @delim + ' THEN ' ) + ', ' FROM ##pivot
DROP TABLE ##pivot
SELECT @sql=left(@sql, len(@sql)-1)
SELECT @select=stuff(@select, charindex(' FROM ', @select)+1, 0, ', ' + @sql + ' ')
EXEC (@select)
SET ANSI_WARNINGS ON
GO
I've been banging my head on this for quite some time now, any insight someone might have as to the problem would be greatly appreciated! Thanks!
View 19 Replies
View Related
May 27, 2004
I am trying to get a returned value from the stored procedure below
CREATE PROC insert_and_return_id
(
@parameter1 varchar,
@parameter2 varchar
)
AS
DECLARE @newID int
SELECT @newID = 0
INSERT INTO tbltest (field1, field2)
VALUES (@parameter1, @parameter2)
IF(@@ROWCOUNT > 0)
BEGIN
SELECT @newID = @@IDENTITY
END
RETURN @newID
GO
___________________________
My asp Code looks like this
___________________________
Function InserTest(value1, value2)
Dim objConn, objRs, objCmd
' Create a connection to the database
Set objConn = Server.CreateObject("ADODB.Connection")
objConn.open "DSN=" & CONNECTION_STRING
' Create the query command
Set objCmd = Server.CreateObject("ADODB.Command")
Set objCmd.ActiveConnection = objConn
objCmd.CommandText = "insert_and_return_id"
objCmd.CommandType = adCmdStoredProc
' Create the parameter for output and returned valueand populate it
objCmd.Parameters.Append objCmd.CreateParameter("parameter1", adVarChar, adParamInput, 255, value1)
objCmd.Parameters.Append objCmd.CreateParameter("parameter2", adVarChar, adParamInput, 255, value2)
objCmd.Parameters.Append objCmd.CreateParameter("newID", adInteger, adParamReturnValue, 4)
objCmd.Execute objCmd0
response.write objCmd.Parameters("newID")
'objCmd.Close
End Function
And I get the following ASP Error
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC SQL Server Driver][SQL Server]Procedure or function insert_and_return_id has too many arguments specified.
/netwasp/tester.asp, line 62
I only just started to use sp's hence it might be something really simple, Can anyone help, cheers?
View 6 Replies
View Related
May 19, 2005
I am trying to swap two rows in a table .. I am stuck with this error since a long time.. can anyone guess where the problem is ? create procedure was working fine in query analyzer but when used it in the stored procedure. I am getting these .. can anyone help me out please ... Your help will be greatly appreciated.. UpdateRowsReorderUp is my storedprocedure ... and i am using MS Sql 2000 .. am I doing something really wrong which i'm not supposed to ?????
Thanks friends..
Procedure 'UpdateRowsReorderUp' expects parameter '@nextlowestsortID', which was not supplied.
CREATE PROCEDURE [dbo].[UpdateRowsReorderUp]
(
@intsortID int,
@nextlowestsortID int,
@MemberID int
)
AS
Select @nextlowestsortID=(Select Top 1 SortID from SelectedCredits where SortID<@intsortID order by SortID DESC)
UPDATE SelectedCredits SET SortID= CASE
WHEN SortID = @nextlowestsortID then @intsortID
WHEN SortID = @intsortID then @nextlowestsortID ELSE SortID End
WHERE MemberID = @MemberID
SELECT * FROM SelectedCredits WHERE MemberID= @MemberID ORDER BY SortID
GO
**************
// this is my script on the page
void moveup(Object s, DataListCommandEventArgs e) {
objcmd= new SqlCommand("UpdateRowsReorderUp",objConn);
objcmd.CommandType = CommandType.StoredProcedure;
objcmd.Parameters.Add("@intsortID",intsortID);
objcmd.Parameters.Add("@MemberID",Session["MemberID"]);
objRdr= objcmd.ExecuteReader();
dlSelCredits.DataSource = objRdr;
dlSelCredits.DataBind();
objRdr.Close();
objConn.Close();
BindData();
}
View 4 Replies
View Related
Sep 12, 2005
I have a stored procedure to which I pass the following parameters @Date smalldatetime, @Amount decimal(15,3) @Exg_Rate decimal(5,3)Inside this stored procedure I call another one passing to it those parameters like thatEXECUTE dbo.[Opening_Balance_AfterInsert] @Date, @Amount*@Exg_RateI receive an error at the above line saying: Incorrect syntax near '*'if I try to put the expression between rounded brackets I receive the error Incorrect syntax near '('How can I pass that expression?
View 1 Replies
View Related
Nov 26, 2005
String[1]: the Size property has an invalid size of 0.I am using a Stored Procedure, shown hereCREATE PROCEDURE GetImagePath( @ID INT, @ImagePath VARCHAR(50) OUTPUT) AS SET NOCOUNT ONSELECT @ImagePath = path FROM dbo.docs WHERE table1= @IDRETURNGOHere is the asp.net code that I am usingSqlConnection conn = new SqlConnection(strConnection);conn.Open();SqlParameter param = new SqlParameter("@ImagePath", SqlDbType.VarChar);param.Direction = ParameterDirection.Output;SqlCommand cmd = new SqlCommand("GetImagePath", conn);cmd.Parameters.AddWithValue("@ID", 100);cmd.Parameters.Add(param);cmd.CommandType = CommandType.StoredProcedure;cmd.ExecuteNonQuery();cmd.Dispose();conn.Dispose();TextBox1.Text = param.Value.ToString();When I run it, I get the following error String[1]: the Size property has an invalid size of 0. The stored procedure is correct because I tested it wtih Query Analyzer. I cant seem to figure out what is causing this error.Any help would be appreciated.
View 1 Replies
View Related
Mar 24, 2006
I am using SQL Server 2005 and wrote a stored procedure as shown below.CREATE PROCEDURE [dbo].[GetUsers]( @StartRowIndex INT, @MaximumRows INT, @SortExpression VARCHAR(50))ASBEGIN DECLARE @SQL VARCHAR(1000); DECLARE @Start VARCHAR(10); SET @Start = CONVERT(VARCHAR(10), @StartRowIndex + 1); DECLARE @End VARCHAR(10); SET @End = CONVERT(VARCHAR(10), @StartRowIndex + @MaximumRows); SET @SQL = ' WITH Data AS( SELECT UserID, Username, FirstName, LastName, ROW_NUMBER() OVER(ORDER BY ' + @SortExpression + ') AS RowNumber FROM Users) SELECT UserID, Username, FirstName, LastName FROM Data WHERE RowNumber BETWEEN ' + @Start + ' AND ' + @End EXEC(@SQL);ENDIn VS 2005, I am using a DataSet. Then I created an ObjectDataSource which binds the GridView control. However, I am getting the following error: Incorrect syntax near ')'After playing around with it, the error is from the line:ROW_NUMBER() OVER(ORDER BY ' + @SortExpression + ') AS RowNumber FROM Users)If I change the line to ROW_NUMBER() OVER(ORDER BY UserID') AS RowNumber FROM Users) it works fine, except for sorting.I dont understand what I might be doing wrong.
View 1 Replies
View Related
Mar 4, 2003
I am writing a stored procedure where I am adding a column to a table, doing some manipulation using the new column and then deleting the column. The problem is when I try to save the stored procedure, it gives me an error because it cannot find the new field on the table. How can I tell SQL to not compile a section or whole stored procedure?
Thanks,
Ken Nicholson
Sara Lee Corporation
View 1 Replies
View Related
Jan 29, 1999
Periodically, while running a stored procedure from a VB front end, I get the error 08501, General Connection Failure.
This application is not being used by anyone else, but no one else running other apps on the same server has a problem.
Additionally a symptom dump is produced followed by a message that 'The current contents of process'input buffer are' sp_cursoropen'.
Any ideas?
Thanks in advance.
CF
View 2 Replies
View Related
Oct 5, 2006
I'm trying to build a quick stored procedure here but I get error with "BackupId"... Why?
Code:
CREATE PROCEDURE dbo.sp_tblBackupListINSERT
/*
(
@parameter1 int = 5,
@parameter2 datatype OUTPUT
)
*/
AS
SET NOCOUNT OFF
INSERT INTO tblFileInvalid
(
BackupID, AccountNo, CompanyName, StoragePath, PhoneNumber, Active, RelayActive, TimeStamp
)
VALUES
(
'86','0607-2114-0910','zzUnknownCompanyName','E:BACKUPProcessed','0000000000','1','1','10/04/2006 6:30:00 PM'
)
/* RETURN */
View 2 Replies
View Related
Aug 17, 2004
does anyone see anything wrong with this stored procedure?? I keep getting a syntax error.
CREATE PROCEDURE [InsertGCTerms]
AS
INSERT INTO [CommissionEmployee_Exclusionsdb].[dbo].[GCEmployeeTerms]([TM #],[FirstName],[LastName],[SocialSecurityNumber],[DateHired],[DepartmentName],[Title])
SELECT a.TM#, a.LASTNAME, a.FIRSTNAME, a.SSN#, a.JOBTITLE, a.HIREDATE, a.DEPT#
FROM GOVEMPLYS AS a
WHERE a.STATUS = 'TERMINATED'
RETURN
GO
View 3 Replies
View Related
May 21, 2008
Hi All,
I have a problem with the procedure shown below. When I try saving it I get the following error, can anyone help
Msg 102, Level 15, State 1, Procedure KillPurveyanceProcess, Line 19
Incorrect syntax near '@tSPId'.
ALTER PROCEDURE [dbo].[KillPurveyanceProcess]
AS
--SET NOCOUNT ON;
DECLARE @tSPId smallint;
DECLARE @tblocked smallint;
DECLARE my_cursor CURSOR FOR SELECT spid,blocked from sys.sysprocesses where program_name ='PurveyanceImport'
and status = 'suspended' and cmd = 'UPDATE'
OPEN my_cursor
FETCH NEXT FROM my_cursor INTO @tSPId,@tblocked
WHILE @@FETCH_STATUS = 0
BEGIN
Kill @tSPId
FETCH NEXT FROM my_cursor INTO @tSPId,@tblocked
END
CLOSE my_cursor
DEALLOCATE my_cursor
Thanks in Advance
Neil
View 2 Replies
View Related
